Add `BuildHasher::hash_one` as unstable
Inspired by https://github.com/rust-lang/rust/pull/86140/files#diff-246941135168fbc44fce120385ee9c3156e08a1c3e2697985b56dcb8d728eedeR2416, where I wanted to write a quick test for a `Hash` implementation and it took more of a dance than I'd hoped.
It looks like this would be handy in hashtable implementations, too -- a quick look at hashbrown found two places where it needs to do the same dance:
6302512a8a/src/map.rs (L247-L270)
I wanted to get a "seems plausible" from a libs member before making a tracking issue, so random-sampling the intersection of highfive and governance gave me...
r? `@joshtriplett`
(As always, bikeshed away! And let me know if I missed something obvious again that I should have used instead.)
(Most of these are from a review by joshtriplett. Thanks!)
Fix errors in `as_pin_ref` and `as_pin_mut` in the "Adapters for
working with references" overview.
Reword some headings about transformation methods.
Reclassify `map`, `map_or`, `map_or_else`, `map_err`, etc. to more
accurately reflect which variants they transform.
Document `Debug` requirement for `get_or_insert_default`.
Reword text about `take` and `replace` to be more accurate.
Add examples for the `Product` and `Sum` traits.
Also:
Move link reference definitions closer to their uses. Warn about making
link reference definintions for `err` and `ok`. Avoid making other link
reference definitions that might conflict in the future (foreign methods
that share a name with local ones, etc.)
Write out the generics of `Option` and `Result` when the following
text refers to the type parameters.
Due to the std/alloc split, it is not possible to make
`alloc::collections::TryReserveError::AllocError` non-exhaustive without
having an unstable, doc-hidden method to construct (which negates the
benefits from `#[non_exhaustive]`.
Document associativity of iterator folds.
Document the associativity of `Iterator::fold` and
`DoubleEndedIterator::rfold` and add examples demonstrating this.
Add links to direct users to the fold of the opposite associativity.
Better errors for Debug and Display traits
Currently, if someone tries to pass value that does not implement `Debug` or `Display` to a formatting macro, they get a very verbose and confusing error message. This PR changes the error messages for missing `Debug` and `Display` impls to be less overwhelming in this case, as suggested by #85844. I was a little less aggressive in changing the error message than that issue proposed. Still, this implementation would be enough to reduce the number of messages to be much more manageable.
After this PR, information on the cause of an error involving a `Debug` or `Display` implementation would suppressed if the requirement originated within a standard library macro. My reasoning was that errors originating from within a macro are confusing when they mention details that the programmer can't see, and this is particularly problematic for `Debug` and `Display`, which are most often used via macros. It is possible that either a broader or a narrower criterion would be better. I'm quite open to any feedback.
Fixes#85844.
Add comments around code where ordering is important due for panic-safety
Iterators contain arbitrary code which may panic. Unsafe code has to be
careful to do its state updates at the right point between calls that may panic.
As requested in https://github.com/rust-lang/rust/pull/86452#discussion_r655153948
r? `@RalfJung`
Iterators contain arbitrary code which may panic. Unsafe code has to be
careful to do its state updates at the right point between calls
that may panic.
Rollup of 11 pull requests
Successful merges:
- #85054 (Revert SGX inline asm syntax)
- #85182 (Move `available_concurrency` implementation to `sys`)
- #86037 (Add `io::Cursor::{remaining, remaining_slice, is_empty}`)
- #86114 (Reopen#79692 (Format symbols under shared frames))
- #86297 (Allow to pass arguments to rustdoc-gui tool)
- #86334 (Resolve type aliases to the type they point to in intra-doc links)
- #86367 (Fix comment about rustc_inherit_overflow_checks in abs().)
- #86381 (Add regression test for issue #39161)
- #86387 (Remove `#[allow(unused_lifetimes)]` which is now unnecessary)
- #86398 (Add regression test for issue #54685)
- #86493 (Say "this enum variant takes"/"this struct takes" instead of "this function takes")
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add `io::Cursor::{remaining, remaining_slice, is_empty}`
Tracking issue: #86369
I came across an inconvenience when answering the following [Stack Overflow](https://stackoverflow.com/questions/67831170) question.
To get the remaining slice you have to call `buff.fill_buf().unwrap()`. Which in my opinion doesn't really tell you what is returned (in the context of Cursor). To improve readability and convenience when using Cursor i propose adding the method `remaining`.
The next thing i found inconvenient (unnecessary long) was detecting if the cursor reached the end. There are a few ways this can be achieved right now:
- `buff.fill_buf().unwrap().is_empty()`
- `buff.position() >= buff.get_ref().len()`
- `buff.bytes().next().is_none()`
Which all seem a bit unintuitive, hidden in trait documentations or just a bit long for such a simple task.
Therefor i propose another method called `is_empty`, maybe with another name, since this one may leave room for interpretation on what really is empty (the underlying slice, the remaining slice or maybe the position).
Since it seemed easier to create this PR instead of an RFC i did that, if an RFC is wanted, i can close this PR and write an RFC first.
Move `available_concurrency` implementation to `sys`
This splits out the platform-specific implementation of `available_concurrency` to the corresponding platforms under `sys`. No changes are made to the implementation.
Tidy didn't lint against this code being originally added outside of `sys` because of a bug (see #84677), this PR also reverts the exclusion that was introduced in that bugfix.
Tracking issue of `available_concurrency`: #74479
Add MIR pass to lower call to `core::slice::len` into `Len` operand
During some larger experiment with range analysis I've found that code like `let l = slice.len()` produces different MIR then one found in bound checks. This optimization pass replaces terminators that are calls to `core::slice::len` with just a MIR operand and Goto terminator.
It uses some heuristics to remove the outer borrow that is made to call `core::slice::len`, but I assume it can be eliminated, just didn't find how.
Would like to express my gratitude to `@oli-obk` who helped me a lot on Zullip
Rollup of 8 pull requests
Successful merges:
- #83739 (Account for bad placeholder errors on consts/statics with trait objects)
- #85637 (document PartialEq, PartialOrd, Ord requirements more explicitly)
- #86152 (Lazify is_really_default condition in the RustdocGUI bootstrap step)
- #86156 (Fix a bug in the linkchecker)
- #86427 (Updated release note)
- #86452 (fix panic-safety in specialized Zip::next_back)
- #86484 (Do not set depth to 0 in fully_expand_fragment)
- #86491 (expand: Move some more derive logic to rustc_builtin_macros)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
fix panic-safety in specialized Zip::next_back
This was unsound since a panic in a.next_back() would result in the
length not being updated which would then lead to the same element
being revisited in the side-effect preserving code.
fixes#86443
BTree: encapsulate LeafRange better & some debug asserts
Looking at iterators again, I think #81937 didn't house enough code in `LeafRange`. Moving the API boundary a little makes things more local in navigate.rs and less complicated in map.rs.
r? `@Mark-Simulacrum`
Move `OsStringExt` and `OsStrExt` to `std::os`
Moves the `OsStringExt` and `OsStrExt` traits and implementations from `sys_common` to `os`. `sys_common` is for abstractions over `sys` and shouldn't really contain publicly exported items.
This does introduce some duplication: the traits and implementations are now duplicated in `unix`, `wasi`, `hermit`, and `sgx`. However, I would argue that this duplication is no different to how something like `MetadataExt` is duplicated in `linux`, `vxworkx`, `redox`, `solaris` etc. The duplication also matches the fact that the traits on different platforms are technically distinct types: any platform is free to add it's own extra methods to the extension trait.
Use `copy_nonoverlapping` to copy `bytes` in `String::insert_bytes`
The second copy could be made using `ptr::copy_nonoverlapping` instead of `ptr::copy`, since aliasing won't allow `self` and `bytes` to overlap. LLVM even seems to recognize this, [replacing the second `memmove` with a `memcopy`](https://rust.godbolt.org/z/Yoaa6rrGn), so this makes it so it's always applied.
Change entry point to 🛡️ against 💥💥-payloads
Guard against panic payloads panicking within entrypoints, where it is
UB to do so.
Note that there are a number of tradeoffs to consider. For instance, I
considered guarding against accidental panics inside the `rt::init` and
`rt::cleanup` code as well, as it is not all that obvious these may not
panic, but doing so would mean that we initialize certain thread-local
slots unconditionally, which has its own problems.
Fixes#86030
r? `@m-ou-se`
Guard against panic payloads panicking within entrypoints, where it is
UB to do so.
Note that there are a number of implementation approaches to consider.
Some simpler, some more complicated. This particular solution is nice in
that it also guards against accidental implementation issues in
various pieces of runtime code, something we cannot prevent statically
right now.
Fixes#86030
Alter std::cell::Cell::get_mut documentation
I felt that there was some inconsistency between between Cell and RefCell with regards to their `get_mut` method documentation: `RefCell` flags this method as "unusual" in that it takes `&mut self`, while `Cell` does not. I attempted to flag this in `Cell`s documentation as well, and point to `RefCell`s method in the case where it is required.
Find relevant parts of docs and the new version below.
The current docs for `Cell::get_mut`:
> Returns a mutable reference to the underlying data.
This call borrows Cell mutably (at compile-time) which guarantees that we possess the only reference.
And `RefCell::get_mut`:
> Returns a mutable reference to the underlying data.
This call borrows `RefCell` mutably (at compile-time) so there is no need for dynamic checks.
However be cautious: this method expects self to be mutable, which is generally not the case when using a `RefCell`. Take a look at the `borrow_mut` method instead if self isn’t mutable.
Also, please be aware that this method is only for special circumstances and is usually not what you want. In case of doubt, use `borrow_mut` instead.
My attempt to make `Cell::get_mut` clearer:
> Returns a mutable reference to the underlying data.
This call borrows `Cell` mutably (at compile-time) which guaranteesthat we possess the only reference.
However be cautious: this method expects `self` to be mutable, which is generally not the case when using a `Cell`. If you require interior mutability by reference, consider using `RefCell` which provides run-time checked mutable borrows through its `borrow_mut` method.
Stabilize span_open() and span_close().
This proposes to stabilize `Group::span_open()` and `Group::span_close()`.
These are part of the `proc_macro_span` feature gate tracked in https://github.com/rust-lang/rust/issues/54725
Most of the features gated behind `proc_macro_span` are about source location information (file path, line and column information), expansion information (parent()), source_text(), etc. Those are not ready for stabilizaiton. However, getting the span of the `(` and `)` separately instead of only of the entire `(...)` can be very useful in proc macros, and doesn't seem blocked on anything that all the other parts of `proc_macro_span` are blocked on. So, this renames the feature gate for those two functions to `proc_macro_group_span` and stabilizes them.
This was unsound since a panic in a.next_back() would result in the
length not being updated which would then lead to the same element
being revisited in the side-effect preserving code.
Add has_data_left() to BufRead
This is a continuation of #40747 and also addresses #40745. The problem with the previous PR was that it had "eof" in its method name. This PR uses a more descriptive method name, but I'm open to changing it.
Dump mingw-64's error codes into our source tree.
I have verified with these runes:
$ f=library/std/src/sys/windows/c/errors.rs
$ diff -ub <(git-cat-file blob HEAD~:$f | sort) <(cat $f | perl -pe 's/WSABASEERR \+ (\d+)/10000 + $1/e' |sort) |grep ^- |less
that this does not change any existing values.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
We're going to add many more of these.
This commit is pure code motion, plus the necessary administrivia, as
I have veried with the following runes:
$ git-diff HEAD~ | grep '^+' |sort >plus
$ git-diff HEAD~ | grep '^-' | perl -pe 's/^-/+/' |sort >min
$ diff -ub min plus |less
The output is precisely the expected `mod` and `use` directives.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
DWORD is a type alias for u32, so this makes no difference.
But this entry is anomalous and in my forthcoming commits I am going
to import many errors wholesale, and I spotted that my wholesale
import didn't match what was here.
CC: Chris Denton <christophersdenton@gmail.com>
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
use ErrorKind::*;
I don't feel confident enough about Windows things to reorder this
alphabetically
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Rely on libc for correct integer types in os/unix/net/ancillary.rs.
This PR is a small maintainability improvement. It simplifies `unix/net/ancillary.rs` in `std` by removing the `cfg_ifs` for casting to the correct integer type, and just rely on libc to define the struct correctly.
Specialize `io::Bytes::size_hint` for more types
Improve the result of `<io::Bytes as Iterator>::size_hint` for some readers. I did not manage to specialize `SizeHint` for `io::Cursor`
Side question: would it be interesting for `io::Read` to have an optional `size_hint` method ?
Linear interpolation
#71016 is a previous attempt at implementation that was closed by the author. I decided to reuse the feature request issue (#71015) as a tracking issue. A member of the rust-lang org will have to edit the original post to be formatted correctly as I am not the issue's original author.
The common name `lerp` is used because it is the term used by most code in a wide variety of contexts; it also happens to be the recently chosen name of the function that was added to C++20.
To ensure symmetry as a method, this breaks the usual ordering of the method from `lerp(a, b, t)` to `t.lerp(a, b)`. This makes the most sense to me personally, and there will definitely be discussion before stabilisation anyway.
Implementing lerp "correctly" is very dififcult even though it's a very common building-block used in all sorts of applications. A good prior reading is [this proposal](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0811r2.html#linear-interpolation) for the C++20 lerp which talks about the various guarantees, which I've simplified down to:
1. Exactness: `(0.0).lerp(start, end) == start` and `(1.0).lerp(start, end) == end`
2. Consistency: `anything.lerp(x, x) == x`
3. Monotonicity: once you go up don't go down
Fun story: the version provided in that proposal, from what I understand, isn't actually monotonic.
I messed around with a *lot* of different lerp implementations because I kind of got a bit obsessed and I ultimately landed on one that uses the fused `mul_add` instruction. Floating-point lerp lore is hard to come by, so, just trust me when I say that this ticks all the boxes. I'm only 90% certain that it's monotonic, but I'm sure that people who care deeply about this will be there to discuss before stabilisation.
The main reason for using `mul_add` is that, in general, it ticks more boxes with fewer branches to be "correct." Although it will be slower on architectures without the fused `mul_add`, that's becoming more and more rare and I have a feeling that most people who will find themselves needing `lerp` will also have an efficient `mul_add` instruction available.
Document the associativity of `Iterator::fold` and
`DoubleEndedIterator::rfold` and add examples demonstrating this.
Add links to direct users to the fold of the opposite associativity.
Make `sum()` and `product()` documentation hyperlinks refer to `Iterator` methods.
The previous linking seemed confusing: within "the sum() method on iterators", "sum()" was linked to `Sum::sum`, not `Iterator::sum`, even though the sentence is talking about the latter. I have rewritten the sentence to be, I believe, clearer, as well as changing the link destinations; applying the same change to the `Product` documentation as well as `Sum`.
I reviewed other traits in the same module and did not see similar issues, and previewed the results using `./x.py doc library/std`.
Remove methods under Implementors on trait pages
As discussed at https://github.com/rust-lang/rust/issues/84326#issuecomment-842652412.
On a trait page, the "Implementors" section currently lists all methods of each implementor. That duplicates the method definitions on the trait itself, and is usually not very useful. So the implementors are collapsed by default. This PR changes rustdoc to just not render them at all. Any documentation specific to an implementor can be found by clicking through to the implementor's page.
This moves the "portability" info inside the `<summary>` tags so it is still visible on trait pages (as originally implemented in #79201). That also means it will be visible on struct/enum pages when methods are collapsed.
Add `#[doc(hidden)]` to all implementations of `Iterator::__iterator_get_unchecked` that didn't already have it. Otherwise, due to #86145, the structs/enums with those implementations would generate documentation for them, and that documentation would have a broken link into the Iterator page. Those links were already "broken" but not detected by the link-checker, because they pointed to one of the Implementors on the Iterator page, which happened to have the right anchor name.
This reduces the Read trait's page size from 128kB to 68kB (uncompressed) and from 12,125 bytes to 9,989 bytes (gzipped
Demo:
https://hoffman-andrews.com/rust/remove-methods-implementors/std/string/struct.String.html#trait-implementationshttps://hoffman-andrews.com/rust/remove-methods-implementors/std/io/trait.Read.html#implementors
r? `@GuillaumeGomez`
Rename IoSlice(Mut)::advance to advance_slice and add IoSlice(Mut)::advance
Also changes the signature of `advance_slice` to accept a `&mut &mut [IoSlice]`, not returning anything. This will better match the `IoSlice::advance` function.
Updates https://github.com/rust-lang/rust/issues/62726.
This method on the Iterator trait is doc(hidden), and about half of
implementations were doc(hidden). This adds the attribute to the
remaining implementations.
The previous linking seemed confusing: within "the sum() method on
iterators", "sum()" was linked to `Sum::sum`, not `Iterator::sum`, even
though the sentence is talking about the latter.
I have rewritten the sentence to be, I believe, clearer, as well as
changing the link destinations; applying the same change to the
`Product` documentation as well as `Sum`.
Link reference in `dyn` keyword documentation
The "read more" sentence formatted "object safety" as inline code
instead of providing a link to more information. This PR adds a link
to the Reference about this matter, as well as the page regarding trait
objects.
---
We could also put these links in the very first line (instead of the link to the
Book) and in the first paragraph which mentions the "object safe" requirement.
Personally, I think it's good to keep the link to the Book up-front as it's more
accessible than the Reference.
Mention the `Borrow` guarantee on the `Hash` implementations for Arrays and `Vec`
To remind people like me who forget about it and send PRs to make them different, and to (probably) get a test failure if the code is changed to no longer uphold it.
optimize Eq implementation for paths
Filesystems generally have a tree-ish structure which means paths are more likely to share a prefix than a suffix. Absolute paths are especially prone to share long prefixes.
quick benchmark consisting of a search through through a vec containing the absolute paths of all (1850) files in `compiler/`:
```
# old
test path::tests::bench_path_cmp ... bench: 227,407 ns/iter (+/- 2,162)
# new
test path::tests::bench_path_cmp ... bench: 64,976 ns/iter (+/- 1,142)
```
Updates `Clone` docs for `Copy` comparison.
Quite a few people (myself included) have come under the impression that the difference between `Copy` and `Clone` is that `Copy` is cheap and `Clone` is expensive, where the actual difference is that `Copy` constrains the type to bit-wise copying, and `Clone` allows for more expensive operations. The source of this misconception is in the `Clone` docs, where the following line is in the description:
> Differs from `Copy` in that `Copy` is implicit and extremely inexpensive, while `Clone` is always explicit and may or may not be expensive.
The `Clone` documentation page also comes up before the `Copy` page on google when searching for "the difference between `Clone` and `Copy`".
This PR updates the documentation to clarify that "extremely inexpensive" means an "inexpensive bit-wise copy" to hopefully prevent future rust users from falling into this misunderstanding.
Remove `Ipv6Addr::is_unicast_site_local`
Removes the unstable method `Ipv6Addr::is_unicast_site_local`, see also #85604 where I have tried to summarize related discussion so far.
Unicast site-local addresses (`fec0::/10`) were deprecated in [IETF RFC #3879](https://datatracker.ietf.org/doc/html/rfc3879), see also [RFC #4291 Section 2.5.7](https://datatracker.ietf.org/doc/html/rfc4291#section-2.5.7). Any new implementation must no longer support the special behaviour of site-local addresses. This is mentioned in the docs of `is_unicast_site_local` and already implemented in `is_unicast_global`, which considers addresses in `fec0::/10` to have global scope, thus overlapping with `is_unicast_site_local`.
Given that RFC #3879 was published in 2004, long before Rust existed, and it is specified that any new implementation must no longer support the special behaviour of site-local addresses, I don't see how a user would ever have a need for `is_unicast_site_local`. It is also confusing that currently both `is_unicast_site_local` and `is_unicast_global` can be `true` for an address, but an address can actually only have a single scope. The deprecating RFC mentions that Site-Local scope was confusing to work with and that the classification of an address as either Link-Local or Global better matches the mental model of users.
There has been earlier discussion of removing `is_unicast_site_local` (https://github.com/rust-lang/rust/pull/60145#issuecomment-485970669) which decided against it, but that had the incorrect assumption that the method was already stable; it is not. (This confusion arose from the placement of the unstable attribute on the entire module, instead of on individual methods, resolved in #85672)
r? `@joshtriplett` as reviewer of all the related PRs
Integrate binary search codes of binary_search_by and partition_point
For now partition_point has own binary search code piece.
It is because binary_search_by had called the comparer more times and the author (=me) wanted to avoid it.
However, now binary_search_by uses the comparer minimum times. (#74024)
So it's time to integrate them.
The appearance of the codes are a bit different but both use completely same logic.
Stabilize {std, core}::prelude::rust_*.
This stabilizes the `{core, std}::prelude::{rust_2015, rust_2018, rust_2021}` modules.
The usage of these modules as the prelude in those editions was already stabilized. This just stabilizes the modules themselves, making it possible for a user to explicitly refer to them.
Tracking issue: https://github.com/rust-lang/rust/issues/85684
FCP on the RFC that included this finished here: https://github.com/rust-lang/rfcs/pull/3114#issuecomment-840577395
Add functions `Duration::try_from_secs_{f32, f64}`
These functions allow constructing a Duration from a floating point value that could be out of range without panicking.
Tracking issue: #83400
Explain non-dropped sender recv in docs
Original senders that are still hanging around could cause
Receiver::recv to not block since this is a potential footgun
for beginners, clarify more on this in the docs for readers to
be aware about it.
Maybe it would be better to show an example of the pattern where `drop(tx)` is used when it is being cloned multiple times? Although I have seen it in quite a few articles but I am surprised that this part is not very clear with the current words without careful reading.
> If the corresponding Sender has disconnected, or it disconnects while this call is blocking, this call will wake up and return Err to indicate that no more messages can ever be received on this channel. However, since channels are buffered, messages sent before the disconnect will still be properly received.
Some words there may seemed similar if I carefully read and relate it but if I am new, I probably does not know "drop" makes it "disconnected". So I mention the words "drop" and "alive" to make it more relatable to lifetime.
Revert #85176 addition of `clone_from` for `ManuallyDrop`
Forwarding `clone_from` to the inner value changes the observable behavior, as previously the inner value would *not* be dropped by the default implementation.
Frankly, this is a super-niche case, so #85176 is welcome to argue the behavior should be otherwise! But if we overrride it, IMO documenting the behavior would be good.
Example: https://play.rust-lang.org/?version=nightly&mode=debug&edition=2018&gist=c5d0856686fa850c1d7ee16891014efb
Make minor wording changes in a few places. Move `filter` to the
"transformations" section. Add `zip` methods to the "transformations"
section. Clarify the section about `Option` iterators, and add a section
about collecting into `Option`.
Clarify that for `Result`, `or` and `or_else` can also produce a
`Result` having a different type.
Implement nonzero arithmetics for NonZero types.
Hello'all, this is my first PR to this repo.
Non-zero natural numbers are stable by addition/multiplication/exponentiation, so it makes sense to make this arithmetic possible with `NonZeroU*`.
The major pitfall is that overflowing underlying `u*` types possibly lead to underlying `0` values, which break the major invariant of `NonZeroU*`. To accommodate it, only `checked_` and `saturating_` operations are implemented.
Other variants allowing wrapped results like `wrapping_` or `overflowing_` are ruled out *de facto*.
`impl Add<u*> for NonZeroU* { .. }` was considered, as it panics on overflow which enforces the invariant, but it does not so in release mode. I considered forcing `NonZeroU*::add` to panic in release mode by deferring the check to `u*::checked_add`, but this is less explicit for the user than directly using `NonZeroU*::checked_add`.
Following `@Lokathor's` advice on zulip, I have dropped the idea.
`@poliorcetics` on Discord also suggested implementing `_sub` operations, but I'd postpone this to another PR if there is a need for it. My opinion is that it could be useful in some cases, but that it makes less sense because non-null natural numbers are not stable by subtraction even in theory, while the overflowing problem is just about technical implementation.
One thing I don't like is that the type of the `other` arg differs in every implementation: `_add` methods accept any raw positive integer, `_mul` methods only accept non-zero values otherwise the invariant is also broken, and `_pow` only seems to accept `u32` for a reason I ignore but that seems consistent throughout `std`. Maybe there is a better way to harmonize this?
This is it, Iope I haven't forgotten anything and I'll be happy to read your feedback.
Original senders that are still hanging around could cause
Receiver::recv to not block since this is a potential footgun
for beginners, clarify more on this in the docs for readers to
be aware about it.
Fix minor tidbits in sender recv doc
Co-authored-by: Dylan DPC <dylan.dpc@gmail.com>
Add example for unbounded receive loops in doc
Show the drop(tx) pattern, based on tokio docs
https://tokio-rs.github.io/tokio/doc/tokio/sync/index.html
Fix example code for drop sender recv
Fix wording in sender docs
Co-authored-by: Josh Triplett <josh@joshtriplett.org>
Fix an error in `map_or_else`. Use more descriptive text for
"don't care" in truth tables. Make minor corrections to truth tables.
Rename `makeiter` to `make_iter` in examples.
std: Stabilize wasm simd intrinsics
This commit performs two changes to stabilize Rust support for
WebAssembly simd intrinsics:
* The stdarch submodule is updated to pull in rust-lang/stdarch#1179.
* The `wasm_target_feature` feature gate requirement for the `simd128`
feature has been removed, stabilizing the name `simd128`.
This should conclude the FCP started on #74372 and...
Closes#74372
This commit performs two changes to stabilize Rust support for
WebAssembly simd intrinsics:
* The stdarch submodule is updated to pull in rust-lang/stdarch#1179.
* The `wasm_target_feature` feature gate requirement for the `simd128`
feature has been removed, stabilizing the name `simd128`.
This should conclude the FCP started on #74372 and...
Closes#74372
to_digit simplification (less jumps)
I just realised we might be able to make use of the fact that changing case in ascii is easy to help simplify to_digit some more.
It looks a bit cleaner and it looks like it's less jumps and there's less instructions in the generated assembly:
https://godbolt.org/z/84Erh5dhz
The benchmarks don't really tell me much. Maybe a slight improvement on the var radix.
Before:
```
test char::methods::bench_to_digit_radix_10 ... bench: 53,819 ns/iter (+/- 8,314)
test char::methods::bench_to_digit_radix_16 ... bench: 57,265 ns/iter (+/- 10,730)
test char::methods::bench_to_digit_radix_2 ... bench: 55,077 ns/iter (+/- 5,431)
test char::methods::bench_to_digit_radix_36 ... bench: 56,549 ns/iter (+/- 3,248)
test char::methods::bench_to_digit_radix_var ... bench: 43,848 ns/iter (+/- 3,189)
test char::methods::bench_to_digit_radix_10 ... bench: 51,707 ns/iter (+/- 10,946)
test char::methods::bench_to_digit_radix_16 ... bench: 52,835 ns/iter (+/- 2,689)
test char::methods::bench_to_digit_radix_2 ... bench: 51,012 ns/iter (+/- 2,746)
test char::methods::bench_to_digit_radix_36 ... bench: 53,210 ns/iter (+/- 8,645)
test char::methods::bench_to_digit_radix_var ... bench: 40,386 ns/iter (+/- 4,711)
test char::methods::bench_to_digit_radix_10 ... bench: 54,088 ns/iter (+/- 5,677)
test char::methods::bench_to_digit_radix_16 ... bench: 55,972 ns/iter (+/- 17,229)
test char::methods::bench_to_digit_radix_2 ... bench: 52,083 ns/iter (+/- 2,425)
test char::methods::bench_to_digit_radix_36 ... bench: 54,132 ns/iter (+/- 1,548)
test char::methods::bench_to_digit_radix_var ... bench: 41,250 ns/iter (+/- 5,299)
```
After:
```
test char::methods::bench_to_digit_radix_10 ... bench: 48,907 ns/iter (+/- 19,449)
test char::methods::bench_to_digit_radix_16 ... bench: 52,673 ns/iter (+/- 8,122)
test char::methods::bench_to_digit_radix_2 ... bench: 48,509 ns/iter (+/- 2,885)
test char::methods::bench_to_digit_radix_36 ... bench: 50,526 ns/iter (+/- 4,610)
test char::methods::bench_to_digit_radix_var ... bench: 38,618 ns/iter (+/- 3,180)
test char::methods::bench_to_digit_radix_10 ... bench: 54,202 ns/iter (+/- 6,994)
test char::methods::bench_to_digit_radix_16 ... bench: 56,585 ns/iter (+/- 8,448)
test char::methods::bench_to_digit_radix_2 ... bench: 50,548 ns/iter (+/- 1,674)
test char::methods::bench_to_digit_radix_36 ... bench: 52,749 ns/iter (+/- 2,576)
test char::methods::bench_to_digit_radix_var ... bench: 40,215 ns/iter (+/- 3,327)
test char::methods::bench_to_digit_radix_10 ... bench: 50,233 ns/iter (+/- 22,272)
test char::methods::bench_to_digit_radix_16 ... bench: 50,841 ns/iter (+/- 19,981)
test char::methods::bench_to_digit_radix_2 ... bench: 50,386 ns/iter (+/- 4,555)
test char::methods::bench_to_digit_radix_36 ... bench: 52,369 ns/iter (+/- 2,737)
test char::methods::bench_to_digit_radix_var ... bench: 40,417 ns/iter (+/- 2,766)
```
I removed the likely as it resulted in a few less instructions. (It's not been in there long - I added it in the last to_digit iteration).
fix off by one in `std::iter::Iterator` documentation
the range `(0..10)` is documented as "The even numbers from zero to ten." - should be ".. to nine".
Updated code examples and wording in move keyword documentation
Had a conversation with someone on the Rust Discord who was confused by the move keyword documentation. Some of the wording is odd sounding ("owned by value" - what else can something be owned by?). Also, some of the examples used Copy types when demonstrating move, leading to variables still being accessible in the outer scope after the move, contradicting the examples' comments.
I changed the move keyword documentation a bit, removing that odd wording and changing all the examples to use non-Copy types
Multiple improvements to RwLocks
This PR replicates #77147, #77380 and #84650 on RWLocks :
- Split `sys_common::RWLock` in `StaticRWLock` and `MovableRWLock`
- Unbox rwlocks on some platforms (Windows, Wasm and unsupported)
- Simplify `RwLock::into_inner`
Notes to reviewers :
- For each target, I copied `MovableMutex` to guess if `MovableRWLock` should be boxed.
- ~A comment says that `StaticMutex` is not re-entrant, I don't understand why and I don't know whether it applies to `StaticRWLock`.~
r? `@m-ou-se`
Filesystems generally have a tree-ish structure which means
paths are more likely to share a prefix than a suffix. Absolute paths
are especially prone to share long prefixes.
Make copy/copy_nonoverlapping fn's again
Make copy/copy_nonoverlapping fn's again, rather than intrinsics.
This a short-term change to address issue #84297.
It effectively reverts PRs #81167#81238 (and part of #82967), #83091, and parts of #79684.
Revert "implement TrustedRandomAccess for Take iterator adapter"
This reverts commit 37a5b515e9 (#83990).
The original change unintentionally caused side-effects from certain iterator chains combining `take`, `zip` and `next_back()` to be omitted which is observable by user code and thus likely a breaking change
Technically one could declare it not a breaking change since `Zip`'s API contract is silent about about its backwards iteration behavior but on the other hand there is nothing in the stable Iterator API that could justify the currently observable behavior. And either way, this impact wasn't noticed or discussed in the original PR.
Fixes#85969
Forwarding implementation for Seek trait's stream_position method
Forwarding implementations for `Seek` trait's `stream_position` were missed when it was stabilized in `1.51.0`
Add `Ipv6Addr::is_unicast`
Adds an unstable utility method `Ipv6Addr::is_unicast` under the feature flag `ip` (tracking issue: #27709).
Added for completeness with the other unicast methods (see also https://github.com/rust-lang/rust/issues/85604#issuecomment-848220455) and opposite of `is_multicast`.
Fix documentation style inconsistencies for IP addresses
Pulled out of #85655 as it is unrelated. Fixes some inconsistencies in the docs for IP addresses:
- Currently some addresses are backticked, some are not, this PR backticks everything consistently. (looks better imo)
- Lowercase hex-literals are used when writing addresses.
To remind people like me who forget about it and send PRs to make them different, and to (probably) get a test failure if the code is changed to no longer uphold it.
The "read more" sentence formatted "object safety" as inline code
instead of providing a link to more information. This PR adds a link
to the Reference about this matter, as well as the page regarding trait
objects.
Default panic message should print Box<dyn Any>
Closes#86039
Prior to this patch, the panic message from running the following code would be `thread 'main' panicked at 'Box<Any>'...`
```rust
use std::panic::panic_any;
fn main() {
panic_any(42);
}
```
This patch updates the phrasing to be more consistent. It now instead shows the following panic message:
```
thread 'main' panicked at 'Box<dyn Any>', ...
```
It's a very small fix 😄
Clarify documentation of slice sorting methods
After reading about [this](https://polkadot.network/a-polkadot-postmortem-24-05-2021/), I realized that although the documentation of these methods is not ambiguous in its current state, it is very easy to read it and erroneously assume that their exact behaviour can be relied upon to be deterministic. Although the docs make no guarantees about which index is returned when there are multiple matches, being more explicit about when and how their determinism can be relied upon should help prevent people from making this mistake in the future.
r? ``@steveklabnik``
String::remove_matches O(n^2) -> O(n)
Copy only non-matching bytes. Replace collection of matches into a
vector with iteration over rejections, exploiting the guarantee that we
mutate parts of the haystack that have already been searched over.
r? `@joshtriplett`
Prior to this patch, the default panic message (resulting from calling
`panic_any(42);` for example), would print the following error message:
```
thread 'main' panicked at 'Box<Any>', ...
```
However, this should be `Box<dyn Any>` instead.
Update standard library for IntoIterator implementation of arrays
This PR partially resolves issue #84513 of updating the standard library part.
I haven't found any remaining doctest examples which are using iterators over e.g. &i32 instead of just i32 in the standard library. Can anyone point me to them if there's remaining any?
Thanks!
r? ```@m-ou-se```
Show test type during prints
Test output can sometimes be confusing. For example doctest with the no_run argument are displayed the same way than test that are run.
During #83857 I got the feedback that test output can be confusing.
For the moment test output is
```
test $DIR/test-type.rs - f (line 12) ... ignored
test $DIR/test-type.rs - f (line 15) ... ok
test $DIR/test-type.rs - f (line 21) ... ok
test $DIR/test-type.rs - f (line 6) ... ok
```
I propose to change output by indicating the test type as
```
test $DIR/test-type.rs - f (line 12) ... ignored
test $DIR/test-type.rs - f (line 15) - compile ... ok
test $DIR/test-type.rs - f (line 21) - compile fail ... ok
test $DIR/test-type.rs - f (line 6) ... ok
```
by indicating the test type after the test name (and in the case of doctest after the function name and line) and before the "...".
------------
Note: this is a proof of concept, the implementation is probably not optimal as the properties added in `TestDesc` are only use in the display and does not represent actual change of behavior, maybe `TestType::DocTest` could have fields
Possible errors when accessing file metadata are platform specific
In particular the `is_dir`, `is_file` and `exists` functions suggests that querying a file requires querying the directory. On Windows this is not normally true.
r? `@m-ou-se`
Add a map method to Bound
Add a map method to std::ops::range::Bound, patterned off of the method
of the same name on Option.
Have left off creating a tracking issue initially, but as soon as I get the go-ahead from a reviewer I'll make that right away 😄
Remove `doc(include)`
This nightly feature is redundant now that `extended_key_value_attributes` is stable (https://github.com/rust-lang/rust/pull/83366). `@rust-lang/rustdoc` not sure if you think this needs FCP; there was already an FCP in #82539, but technically it was for deprecating, not removing the feature altogether.
This should not be merged before #83366.
cc `@petrochenkov`
rustdoc: link to stable/beta docs consistently in documentation
This is an alternative to https://github.com/rust-lang/rust/pull/84941 which fixes the problem consistently by linking to stable/beta for *all* items, not just for primitives.
## User-facing changes
- Intra-doc links to primitives that currently go to rust-lang.org/nightly/std/primitive.x.html will start going to channel that rustdoc was built with. Nightly will continue going to /nightly; Beta will link to /beta; stable compilers will link to /1.52.1 (or whatever version they were built as).
- Cross-crate links from std to core currently go to /nightly unconditionally. They will start going to /1.52.0 on stable channels (but remain the same on nightly channels).
- Intra-crate links from std to std (or core to core) currently go to the same URL they are hosted at; they will continue to do so. Notably, this is different from everything else because it can preserve the distinction between /stable and /1.52.0 by using relative links.
Note that "links" includes both intra-doc links and rustdoc's own
automatically generated hyperlinks.
## Implementation changes
- Update the testsuite to allow linking to /beta and /1.52.1 in docs
- Use an html_root_url for the standard library that's dependent on the channel
This avoids linking to nightly docs on stable.
- Update rustdoc to use channel-dependent links for primitives from an
unknown crate
- Set DOC_RUST_LANG_ORG_CHANNEL from bootstrap to ensure it's in sync
- Include doc.rust-lang.org in the channel
cc Mark-Simulacrum - I know [you were dubious about this in the past](https://rust-lang.zulipchat.com/#narrow/stream/122651-general/topic/Rustdoc.20unconditionally.20links.20to.20nightly.20libstd.20docs/near/231223124), but I'm not quite sure why? I see this as "just a bugfix", I don't know why rustdoc should unconditionally link to nightly.
cc dtolnay who commented in https://github.com/rust-lang/rust/issues/30693:
> I would welcome a PR to solve this permanently if anyone has ideas for how. I don't believe we need an RFC.
Fixes https://github.com/rust-lang/rust/issues/30693 (note that issue is marked as feature-accepted, although I don't see where it was discussed).
## User-facing changes
- Intra-doc links to primitives that currently go to rust-lang.org/nightly/std/primitive.x.html will start going to channel that rustdoc was built with. Nightly will continue going to /nightly; Beta will link to /beta; stable compilers will link to /1.52.1 (or whatever version they were built as).
- Cross-crate links from std to core currently go to /nightly unconditionally. They will start going to /1.52.0 on stable channels (but remain the same on nightly channels).
- Intra-crate links from std to std (or core to core) currently go to the same URL they are hosted at; they will continue to do so. Notably, this is different from everything else because it can preserve the distinction between /stable and /1.52.0 by using relative links.
Note that "links" includes both intra-doc links and rustdoc's own
automatically generated hyperlinks.
## Implementation changes
- Update the testsuite to allow linking to /beta and /1.52.1 in docs
- Use an html_root_url for the standard library that's dependent on the channel
This avoids linking to nightly docs on stable.
- Update rustdoc to use channel-dependent links for primitives from an
unknown crate
- Set DOC_RUST_LANG_ORG_CHANNEL from bootstrap to ensure it's in sync
- Include doc.rust-lang.org in the channel
Support Android ndk versions `r23-beta3` and up
Since android ndk version `r23-beta3`, `libgcc` has been replaced with `libunwind`. This moves the linking of `libgcc`/`libunwind` into the `unwind` crate where we check if the system compiler can find `libunwind` and fall back to `libgcc` if needed.
Stabilize `vecdeque_binary_search`
This PR stabilizes the feature `vecdeque_binary_search` as tracked in #78021.
The tracking issue has not received any comments for the past 5 months, and concerns have been raised neither in the RFC rust-lang/rfcs#2997 nor in the tracking issue #78021.
Since android ndk version `r23-beta3`, `libgcc` has been replaced with
`libunwind`. This moves the linking of `libgcc`/`libunwind` into the
`unwind` crate where we check if the system compiler can find
`libunwind` and fall back to `libgcc` if needed.
Mention "null pointer optimization" in option docs.
I had seen people discuss "null pointer optimization," but when I tried to find official documentation (using Google), the `std::option` page didn't show up, because it doesn't use that term. Hopefully adding the term will help others find it in the future.
- Split `sys_common::RWLock` between `StaticRWLock` and `MovableRWLock`
- Unbox `RwLock` on some platforms (Windows, Wasm and unsupported)
- Simplify `RwLock::into_inner`
Remove `Ipv6Addr::is_unicast_link_local_strict`
Removes the unstable method `Ipv6Addr::is_unicast_link_local_strict` and keeps the behaviour of `Ipv6Addr::is_unicast_link_local`, see also #85604 where I have tried to summarize related discussion so far.
My intent is for `is_unicast_link_local`, `is_unicast_site_local` and `is_unicast_global` to have the semantics of checking if an address has Link-Local, Site-Local or Global scope, see also #85696 which changes the behaviour of `is_unicast_global` and renames these methods to `has_unicast_XXX_scope` to reflect this.
For checking Link-Local scope we currently have two methods: `is_unicast_link_local` and `is_unicast_link_local_strict`. This is because of what appears to be conflicting definitions in [IETF RFC 4291](https://datatracker.ietf.org/doc/html/rfc4291).
From [IETF RFC 4291 section 2.4](https://datatracker.ietf.org/doc/html/rfc4291#section-2.4): "Link-Local unicast" (`FE80::/10`)
```text
Address type Binary prefix IPv6 notation Section
------------ ------------- ------------- -------
Unspecified 00...0 (128 bits) ::/128 2.5.2
Loopback 00...1 (128 bits) ::1/128 2.5.3
Multicast 11111111 FF00::/8 2.7
Link-Local unicast 1111111010 FE80::/10 2.5.6
Global Unicast (everything else)
```
From [IETF RFC 4291 section 2.5.6](https://datatracker.ietf.org/doc/html/rfc4291#section-2.5.6): "Link-Local IPv6 Unicast Addresses" (`FE80::/64`)
```text
| 10 bits | 54 bits | 64 bits |
+----------+-------------------------+----------------------------+
|1111111010| 0 | interface ID |
+----------+-------------------------+----------------------------+
```
With `is_unicast_link_local` checking `FE80::/10` and `is_unicast_link_local_strict` checking `FE80::/64`.
There is also [IETF RFC 5156 section 2.4](https://datatracker.ietf.org/doc/html/rfc5156#section-2.4) which defines "Link-Scoped Unicast" as `FE80::/10`.
It has been pointed out that implementations in other languages and the linux kernel all use `FE80::/10` (https://github.com/rust-lang/rust/pull/76098#issuecomment-706916840, https://github.com/rust-lang/rust/pull/76098#issuecomment-705928605).
Given all of this I believe the correct interpretation to be the following: All addresses in `FE80::/10` are defined as having Link-Local scope, however currently only the block `FE80::/64` has been allocated for "Link-Local IPv6 Unicast Addresses". This might change in the future however; more addresses in `FE80::/10` could be allocated and those will have Link-Local scope. I therefore believe the current behaviour of `is_unicast_link_local` to be correct (if interpreting it to have the semantics of `has_unicast_link_local_scope`) and `is_unicast_link_local_strict` to be unnecessary, confusing and even a potential source of future bugs:
Currently there is no real difference in checking `FE80::/10` or `FE80::/64`, since any address in practice will be `FE80::/64`. However if an application uses `is_unicast_link_local_strict` to implement link-local (so non-global) behaviour, it will be incorrect in the future if addresses outside of `FE80::/64` are allocated.
r? `@joshtriplett` as reviewer of all the related PRs
Add `String::extend_from_within`
This PR adds `String::extend_from_within` function under the `string_extend_from_within` feature gate similar to the [`Vec::extend_from_within`] function.
```rust
// String
pub fn extend_from_within<R>(&mut self, src: R)
where
R: RangeBounds<usize>;
```
[`Vec::extend_from_within`]: https://github.com/rust-lang/rust/issues/81656
Revert "Auto merge of #83770 - the8472:tra-extend, r=Mark-Simulacrum"
Due to a performance regression that didn't show up in the original perf run
this reverts commit 9111b8ae97 (#83770), reversing
changes made to 9a700d2947.
Since since is expected to have the inverse impact it should probably be rollup=never.
r? `@Mark-Simulacrum`
Make `Step` trait safe to implement
This PR makes a few modifications to the `Step` trait that I believe better position it for stabilization in the short term. In particular,
1. `unsafe trait TrustedStep` is introduced, indicating that the implementation of `Step` for a given type upholds all stated invariants (which have remained unchanged). This is gated behind a new `trusted_step` feature, as stabilization is realistically blocked on min_specialization.
2. The `Step` trait is internally specialized on the `TrustedStep` trait, which avoids a serious performance regression.
3. `TrustedLen` is implemented for `T: TrustedStep` as the latter's invariants subsume the former's.
4. The `Step` trait is no longer `unsafe`, as the invariants must not be relied upon by unsafe code (unless the type implements `TrustedStep`).
5. `TrustedStep` is implemented for all types that implement `Step` in the standard library and compiler.
6. The `step_trait_ext` feature is merged into the `step_trait` feature. I was unable to find any reasoning for the features being split; the `_unchecked` methods need not necessarily be stabilized at the same time, but I think it is useful to have them under the same feature flag.
All existing implementations of `Step` will be broken, as it is not possible to `unsafe impl` a safe trait. Given this trait only exists on nightly, I feel this breakage is acceptable. The blanket `impl<T: Step> TrustedLen for T` will likely cause some minor breakage, but this should be covered by the equivalent impl for `TrustedStep`.
Hopefully these changes are sufficient to place `Step` in decent position for stabilization, which would allow user-defined types to be used with `a..b` syntax.
copy_from_slice generally falls back to memcpy/memmove, which is much more expensive
than we need to write a single element in.
This saves 0.26% instructions on the diesel benchmark.
To make way for a new IoSlice(Mut)::advance function that advances a
single slice.
Also changes the signature to accept a `&mut &mut [IoSlice]`, not
returning anything. This will better match the future IoSlice::advance
function.
This patch adds `String::extend_from_within` function under the
`string_extend_from_within` feature gate similar to the
`Vec::extend_from_within` function.
Add #[track_caller] to panic_any
Report the panic location from the user code.
```rust
use std::panic;
use std::panic::panic_any;
fn main() {
panic::set_hook(Box::new(|panic_info| {
if let Some(location) = panic_info.location() {
println!(
"panic occurred in file '{}' at line {}",
location.file(),
location.line(),
);
} else {
println!("panic occurred but can't get location information...");
}
}));
panic_any(42);
}
````
Before:
`panic occurred in file '/rustc/ff2c947c00f867b9f012e28ba88cecfbe556f904/library/std/src/panic.rs' at line 59`
After:
`panic occurred in file 'src/main.rs' at line 17`
In particular the `is_dir`, `is_file` and `exists` functions says that querying a file requires querying the directory. On Windows this is not normally true.
Mention workaround for floats in Iterator::{min, max}
`Iterator::{min, max}` can't be used with iterators of floats due to NaN issues. This suggests a workaround in the documentation of those functions.
Forwarding `clone_from` to the inner value changes the observable
behavior, as previously the inner value would *not* be dropped by the
default implementation.
Enable Vec's calloc optimization for Option<NonZero>
Someone on discord noticed that `vec![None::<NonZeroU32>; N]` wasn't getting the optimization, so here's a PR 🙃
We can certainly do this in the standard library because we know for sure this is ok, but I think it's also a necessary consequence of documented guarantees like those in https://doc.rust-lang.org/std/option/#representation and https://doc.rust-lang.org/core/num/struct.NonZeroU32.html
It feels weird to do this without adding a test, but I wasn't sure where that would belong. Is it worth adding codegen tests for these?
libunwind fix and cleanup
Fix:
1. "system-llvm-libunwind" now only skip build-script for linux target
2. workaround from https://github.com/rust-lang/rust/pull/65972 is not needed, upstream fix it in 68c50708d1 ( LLVM 11 )
3. remove code for MSCV and Apple in `compile()`, as they are not used
4. fix https://github.com/rust-lang/rust/issues/69222 , compile c files and cpp files in different config
5. fix conditional compilation for musl target.
6. fix that x86_64-fortanix-unknown-sgx don't link libunwind built in build-script into rlib
Add inline attr to CString::into_inner so it can optimize out NonNull checks
It seems that currently if you convert any of the standard library's container to a pointer and then to a NonNull pointer, all will optimize out the NULL check except `CString`(https://godbolt.org/z/YPKW9G5xn),
because for some reason `CString::into_inner` isn't inlined even though it's a private function that should compile into a simple `mov` instruction.
Adding a simple `#[inline]` attribute solves this, code example:
```rust
use std::ffi::CString;
use std::ptr::NonNull;
pub fn cstring_nonull(mut n: CString) -> NonNull<i8> {
NonNull::new(CString::into_raw(n)).unwrap()
}
```
assembly before:
```asm
__ZN3wat14cstring_nonull17h371c755bcad76294E:
.cfi_startproc
pushq %rbp
.cfi_def_cfa_offset 16
.cfi_offset %rbp, -16
movq %rsp, %rbp
.cfi_def_cfa_register %rbp
callq __ZN3std3ffi5c_str7CString10into_inner17h28ece07b276e2878E
testq %rax, %rax
je LBB0_2
popq %rbp
retq
LBB0_2:
leaq l___unnamed_1(%rip), %rdi
leaq l___unnamed_2(%rip), %rdx
movl $43, %esi
callq __ZN4core9panicking5panic17h92a83fa9085a8f73E
.cfi_endproc
.section __TEXT,__const
l___unnamed_1:
.ascii "called `Option::unwrap()` on a `None` value"
l___unnamed_3:
.ascii "wat.rs"
.section __DATA,__const
.p2align 3
l___unnamed_2:
.quad l___unnamed_3
.asciz "\006\000\000\000\000\000\000\000\006\000\000\000(\000\000"
```
Assembly after:
```asm
__ZN3wat14cstring_nonull17h9645eb9341fb25d7E:
.cfi_startproc
pushq %rbp
.cfi_def_cfa_offset 16
.cfi_offset %rbp, -16
movq %rsp, %rbp
.cfi_def_cfa_register %rbp
movq %rdi, %rax
popq %rbp
retq
.cfi_endproc
```
(Related discussion on zulip: https://rust-lang.zulipchat.com/#narrow/stream/219381-t-libs/topic/NonNull.20From.3CBox.3CT.3E.3E)
Remove Iterator #[rustc_on_unimplemented]s that no longer apply.
Now that `IntoIterator` is implemented for arrays, all the `rustc_on_unimplemented` for arrays of ranges (e.g. `for _ in [1..3] {}`) no longer apply, since they are now valid Rust.
Separated these from #85670, because we should discuss a potential new (clippy?) lint for these.
Until Rust 1.52, `for _ in [1..3] {}` produced:
```
error[E0277]: `[std::ops::Range<{integer}>; 1]` is not an iterator
--> src/main.rs:2:14
|
2 | for _ in [1..3] {}
| ^^^^^^ if you meant to iterate between two values, remove the square brackets
|
= help: the trait `std::iter::Iterator` is not implemented for `[std::ops::Range<{integer}>; 1]`
= note: `[start..end]` is an array of one `Range`; you might have meant to have a `Range` without the brackets: `start..end`
= note: required by `std::iter::IntoIterator::into_iter`
```
But in Rust 1.53 and later, it compiles fine. It iterates over the array by value, for one iteration with the element `1..3`.
This is probably a mistake, which is no longer caught. Should we have a lint for it? Should Clippy have a lint for it?
cc ```@estebank``` ```@flip1995```
cc https://github.com/rust-lang/rust/issues/84513
Update cc
Recent commits have improved `cc`'s finding of MSVC tools on Windows. In particular it should help to address these issues: #83043 and #43468
While stdlib implementations of the unchecked methods require unchecked
math, there is no reason to gate it behind this for external users. The
reasoning for a separate `step_trait_ext` feature is unclear, and as
such has been merged as well.
Add `TrustedRandomAccess` specialization for `Vec::extend()`
This should do roughly the same as the `TrustedLen` specialization but result in less IR by using `__iterator_get_unchecked`
instead of `Iterator::for_each`
Conflicting specializations are manually prioritized by grouping them under yet another helper trait.
Fix typo in core::array::IntoIter comment
Saw a small typo reading some internal comments and decided to just throw this up to fix it for future readers.
Remove num_as_ne_bytes feature
From the discussion in #76976, it is determined that eventual results of the safe transmute work as a more general mechanism will let these conversions happen in safe code without needing specialized methods.
Merging this PR closes#76976 and resolves#64464. Several T-libs members have raised their opinion that it doesn't pull its weight as a standalone method, and so we should not track it as a specific thing to add.
fix `matches!` and `assert_matches!` on edition 2021
Previously this code failed to compile on edition 2021. [(Playground)](https://play.rust-lang.org/?version=nightly&mode=debug&edition=2021&gist=53960f2f051f641777b9e458da747707)
```rust
fn main() {
matches!((), ());
}
```
```
Compiling playground v0.0.1 (/playground)
error: `$pattern:pat` may be followed by `|`, which is not allowed for `pat` fragments
|
= note: allowed there are: `=>`, `,`, `=`, `if` or `in`
error: aborting due to previous error
error: could not compile `playground`
To learn more, run the command again with --verbose.
```
Demote `ControlFlow::{from|into}_try` to `pub(crate)`
They have mediocre names and non-obvious semantics, so personally I don't think they're worth trying to stabilize, and thus might as well just be internal (they're used for convenience in iterator adapters), not something shown in the rustdocs.
I don't think anyone actually wanted to use them outside `core` -- they just got made public-but-unstable along with the whole type in https://github.com/rust-lang/rust/pull/76204 that promoted `LoopState` from an internal type to the exposed `ControlFlow` type.
cc https://github.com/rust-lang/rust/issues/75744, the tracking issue they mention.
cc https://github.com/rust-lang/rust/pull/85608, the PR where I'm proposing stabilizing the type.
Fix pointer provenance in <[T]>::copy_within
Previously the `self.as_mut_ptr()` invalidated the pointer created by the first `self.as_ptr()`. This also triggered miri when run with `-Zmiri-track-raw-pointers`
doc: clarify Mutex::try_lock, etc. errors
Clarify error returns from Mutex::try_lock, RwLock::try_read,
RwLock::try_write to make it more obvious that both poisoning
and the lock being already locked are possible errors.
Weak's type parameter may dangle on drop
Way back in 34076bc0c9, #\[may_dangle\] was added to Rc\<T\> and Arc\<T\>'s Drop impls. That appears to have been because a test added in #28929 used Arc and Rc with dangling references at drop time. However, Weak was not covered by that test, and therefore no #\[may_dangle\] was forced to be added at the time.
As far as dropping, Weak has *even less need* to interact with the T than Rc and Arc do. Roughly speaking #\[may_dangle\] describes generic parameters that the outer type's Drop impl does not interact with except by possibly dropping them; no other interaction (such as trait method calls on the generic type) is permissible. It's clear this applies to Rc's and Arc's drop impl, which sometimes drop T but otherwise do not interact with one. It applies *even more* to Weak. Dropping a Weak cannot ever cause T's drop impl to run. Either there are strong references still in existence, in which case better not drop the T. Or there are no strong references still in existence, in which case the T would already have been dropped previously by the drop of the last strong count.
Better English for documenting when to use unimplemented!()
I don't think "plan of using" is correct here. I considered "plan on using" but eventually decided "plan to use" is better.
Bump bootstrap compiler to beta 1.53.0
This PR bumps the bootstrap compiler to version 1.53.0 beta, as part of our usual release process (this was supposed to be Wednesday's step, but creating the beta release took longer than expected).
The PR also includes the "Bootstrap: skip rustdoc fingerprint for building docs" commit, see the reasoning [on Zulip](https://zulip-archive.rust-lang.org/241545trelease/88450153betabootstrap.html).
r? `@Mark-Simulacrum`
Extend `rustc_on_implemented` to improve more `?` error messages
`_Self` could match the generic definition; this adds that functionality for matching the generic definition of type parameters too.
Your advice welcome on the wording of all these messages, and which things belong in the message/label/note.
r? `@estebank`
fix pad_integral example
pad_integral's parameter `is_nonnegative - whether the original integer was either positive or zero`, but in example it checked as `self.nb > 0`, so it previously printed `-0` for `format!("{}", Foo::new(0)`, what is wrong.
Extremely outdated; not only are traits implemented on arrays of arbitrary length, those implementations are documented on the primitive type, not in this module.
Fix `vxworks`
Some PRs made the `vxworks` target not build anymore. This PR fixes that:
- #82973: copy `ExitStatusError` implementation from `unix`.
- #84716: no `libc::chroot` available on `vxworks`, so for now don't implement `os::unix::fs::chroot`.
Remove surplus prepend LinkedList fn
This nightly library feature provides a function on `LinkedList<T>` that is identical to `fn append` with a reversed order of arguments. Observe this diff against the `fn append` doctest:
```diff
+#![feature(linked_list_prepend)]
fn main() {
use std::collections::LinkedList;
let mut list1 = LinkedList::new();
list1.push_back('a');
let mut list2 = LinkedList::new();
list2.push_back('b');
list2.push_back('c');
- list1.append(&mut list2);
+ list2.prepend(&mut list1);
- let mut iter = list1.iter();
+ let mut iter = list2.iter();
assert_eq!(iter.next(), Some(&'a'));
assert_eq!(iter.next(), Some(&'b'));
assert_eq!(iter.next(), Some(&'c'));
assert!(iter.next().is_none());
- assert!(list2.is_empty());
+ assert!(list1.is_empty());
}
```
As this has received no obvious request to stabilize it, nor does it have a tracking issue, and was left on nightly and the consensus seems to have been to deprecate it in this pre-1.0 PR in 2014, https://github.com/rust-lang/rust/pull/20356, I propose simply removing it.
add an example to explain std::io::Read::read returning 0 in some cases
I have always found the explanation about `Read::read` returning 0 to indicate EOF but not indefinitely, so here's more info using Linux as example. I can also add example code if necessary
MSVC: Avoid using jmp stubs for dll function imports
Windows import libraries contain two symbols for every function: `__imp_FunctionName` and `FunctionName` (where `FunctionName` is the name of the function to be imported).
`__imp_FunctionName` contains the address of the imported function. This will be filled in by the Windows executable loader at runtime. `FunctionName` contains a jmp stub that simply jumps to the address given by `__imp_FunctionName`. E.g. it's a function that solely contains a single jmp instruction:
```asm
jmp __imp_FunctionName
```
When using an external DLL function in Rust, by default the linker will link to FunctionName, causing a bit of indirection at runtime. In Microsoft's C++ it's possible to instead tell it to insert calls to the address in `__imp_FunctionName` by using the `__declspec(dllimport)` attribute. In Rust it's possible to get effectively the same behaviour using the `#[link]` attribute on `extern` blocks.
----
The second commit also merges multiple `extern` blocks into one block. This is because otherwise Rust will currently create duplicate linker arguments for each block. In this case having duplicates shouldn't matter much other than the noise when displaying the linker command.
Windows implementation of feature `path_try_exists`
Draft of a Windows implementation of `try_exists` (#83186).
The first commit reorganizes the code so I would be interested to get some feedback on if this is a good idea or not. It moves the `Path::try_exists` function to `fs::exists`. leaving the former as a wrapper for the latter. This makes it easier to provide platform specific implementations and matches the `fs::metadata` function.
The other commit implements a Windows specific variant of `exists`. I'm still figuring out my approach so this is very much a first draft. Eventually this will need some more eyes from knowledgable Windows people.
Clarify error returns from Mutex::try_lock, RwLock::try_read,
RwLock::try_write to make it more obvious that both poisoning
and the lock being already locked are possible errors.
std: Don't inline TLS accessor on MinGW
This is causing [issues] on Cargo's own CI for MinGW and given the
original investigation there's no reason that MinGW should work when
MSVC doesn't, this this tweaks the MSVC exception to being a Windows exception.
[issues]: https://github.com/rust-lang/cargo/runs/2626676503?check_suite_focus=true#step:9:2453
Move `std::memchr` to `sys_common`
`std::memchr` is a thin abstraction over the different `memchr` implementations in `sys`, along with documentation and tests. The module is only used internally by `std`, nothing is exported externally. Code like this is exactly what the `sys_common` module is for, so this PR moves it there.
Update list of allowed aarch64 features
I recently added these features to std_detect for aarch64 linux, pending [review](https://github.com/rust-lang/stdarch/pull/1146).
I have commented any features not supported by LLVM 9, the current minimum version for Rust. Some (PAuth at least) were renamed between 9 & 12 and I've left them disabled. TME, however, is not in LLVM 9 but I've left it enabled.
See https://github.com/rust-lang/stdarch/issues/993
Rollup of 8 pull requests
Successful merges:
- #84717 (impl FromStr for proc_macro::Literal)
- #85169 (Add method-toggle to <details> for methods)
- #85287 (Expose `Concurrent` (private type in public i'face))
- #85315 (adding time complexity for partition_in_place iter method)
- #85439 (Add diagnostic item to `CStr`)
- #85464 (Fix UB in documented example for `ptr::swap`)
- #85470 (Fix invalid CSS rules for a:hover)
- #85472 (CTFE Machine: do not expose Allocation)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Introduce `sys_common::rt::rtprintpanic!` to replace `sys_common::util` functionality
This PR introduces a new macro `rtprintpanic!`, similar to `sys_common::util::dumb_print` and uses that macro to replace all `sys_common::util` functionality.
Avoid zero-length memcpy in formatting
This has two separate and somewhat orthogonal commits. The first change adjusts the ToString general impl for all types that implement Display; it no longer uses the full format machinery, rather directly falling onto a `std::fmt::Display::fmt` call. The second change directly adjusts the general core::fmt::write function which handles the production of format_args! to avoid zero-length push_str calls.
Both changes target the fact that push_str will still call memmove internally (or a similar function), as it doesn't know the length of the passed string. For zero-length strings in particular, this is quite expensive, and even for very short (several bytes long) strings, this is also expensive. Future work in this area may wish to have us fallback to write_char or similar, which may be cheaper on the (typically) short strings between the interpolated pieces in format_args!.
adding time complexity for partition_in_place iter method
I feel that one thing missing from rust docs compared to cpp references is existence of time complexity for all methods and functions. While it would be humongous task to include it for everything in single go, it is still doable if we as community keep on adding it in relevant places as and when we find them.
This PR adds the time complexity for partition_in_place method in iter.
Expose `Concurrent` (private type in public i'face)
#53410 introduced experimental support for custom test frameworks.
Such frameworks may wish to build upon `library/test` by calling into its publicly exposed API (which I entirely understand is wholly unstable). However, any that wish to call `test::run_test` cannot currently do so because `test::options::Concurrent` (the type of its `concurrent` parameter) is not publicly exposed.
impl FromStr for proc_macro::Literal
Note that unlike `impl FromStr for proc_macro::TokenStream`, this impl does not permit whitespace or comments. The input string must consist of nothing but your literal.
- `"1".parse::<Literal>()` ⟶ ok
- `"1.0".parse::<Literal>()` ⟶ ok
- `"'a'".parse::<Literal>()` ⟶ ok
- `"\"\n\"".parse::<Literal>()` ⟶ ok
- `"0 1".parse::<Literal>()` ⟶ LexError
- `" 0".parse::<Literal>()` ⟶ LexError
- `"0 ".parse::<Literal>()` ⟶ LexError
- `"/* comment */0".parse::<Literal>()` ⟶ LexError
- `"0/* comment */".parse::<Literal>()` ⟶ LexError
- `"0// comment".parse::<Literal>()` ⟶ LexError
---
## Use case
```rust
let hex_int: Literal = format!("0x{:x}", int).parse().unwrap();
```
The only way this is expressible in the current API is significantly worse.
```rust
let hex_int = match format!("0x{:x}", int)
.parse::<TokenStream>()
.unwrap()
.into_iter()
.next()
.unwrap()
{
TokenTree::Literal(literal) => literal,
_ => unreachable!(),
};
```
remove InPlaceIterable marker from Peekable due to unsoundness
The unsoundness is not in Peekable per se, it rather is due to the
interaction between Peekable being able to hold an extra item
and vec::IntoIter's clone implementation shortening the allocation.
An alternative solution would be to change IntoIter's clone implementation
to keep enough spare capacity available.
fixes#85322
std: Attempt again to inline thread-local-init across crates
Issue #25088 has been part of `thread_local!` for quite some time now.
Historical attempts have been made to add `#[inline]` to `__getit`
in #43931, #50252, and #59720, but these attempts ended up not landing
at the time due to segfaults on Windows.
In the interim though with `const`-initialized thread locals AFAIK this
is the only remaining bug which is why you might want to use
`#[thread_local]` over `thread_local!`. As a result I figured it was
time to resubmit this and see how it fares on CI and if I can help
debugging any issues that crop up.
Closes#25088
Override `clone_from` for some types
Override `clone_from` method of the `Clone` trait for:
- `cell::RefCell`
- `cmp::Reverse`
- `io::Cursor`
- `mem::ManuallyDrop`
This can bring performance improvements.
This also checks the contents and not only the capacity in case IntoIter's clone implementation is changed to add capacity at the end. Extra capacity at the beginning would be needed to make InPlaceIterable work.
Co-authored-by: Giacomo Stevanato <giaco.stevanato@gmail.com>
The unsoundness is not in Peekable per se, it rather is due to the
interaction between Peekable being able to hold an extra item
and vec::IntoIter's clone implementation shortening the allocation.
An alternative solution would be to change IntoIter's clone implementation
to keep enough spare capacity available.
Implement the new desugaring from `try_trait_v2`
~~Currently blocked on https://github.com/rust-lang/rust/issues/84782, which has a PR in https://github.com/rust-lang/rust/pull/84811~~ Rebased atop that fix.
`try_trait_v2` tracking issue: https://github.com/rust-lang/rust/issues/84277
Unfortunately this is already touching a ton of things, so if you have suggestions for good ways to split it up, I'd be happy to hear them. (The combination between the use in the library, the compiler changes, the corresponding diagnostic differences, even MIR tests mean that I don't really have a great plan for it other than trying to have decently-readable commits.
r? `@ghost`
~~(This probably shouldn't go in during the last week before the fork anyway.)~~ Fork happened.
Issue #25088 has been part of `thread_local!` for quite some time now.
Historical attempts have been made to add `#[inline]` to `__getit`
in #43931, #50252, and #59720, but these attempts ended up not landing
at the time due to segfaults on Windows.
In the interim though with `const`-initialized thread locals AFAIK this
is the only remaining bug which is why you might want to use
`#[thread_local]` over `thread_local!`. As a result I figured it was
time to resubmit this and see how it fares on CI and if I can help
debugging any issues that crop up.
Closes#25088
Implement more Iterator methods on core::iter::Repeat
`core::iter::Repeat` always returns the same element, which means we can
do better than implementing most `Iterator` methods in terms of
`Iterator::next`.
Fixes#81292.
#81292 raises the question of whether these changes violate the contract of `core::iter::Repeat`, but as far as I can tell `core::iter::repeat` doesn't make any guarantees around how it calls `Clone::clone`.
Provide ExitStatusError
Closes#73125
In MR #81452 "Add #[must_use] to [...] process::ExitStatus" we concluded that the existing arrangements in are too awkward so adding that `#[must_use]` is blocked on improving the ergonomics.
I wrote a mini-RFC-style discusion of the approach in https://github.com/rust-lang/rust/issues/73125#issuecomment-771092741
# Stabilization report
## Summary
This stabilizes using macro expansion in key-value attributes, like so:
```rust
#[doc = include_str!("my_doc.md")]
struct S;
#[path = concat!(env!("OUT_DIR"), "/generated.rs")]
mod m;
```
See the changes to the reference for details on what macros are allowed;
see Petrochenkov's excellent blog post [on internals](https://internals.rust-lang.org/t/macro-expansion-points-in-attributes/11455)
for alternatives that were considered and rejected ("why accept no more
and no less?")
This has been available on nightly since 1.50 with no major issues.
## Notes
### Accepted syntax
The parser accepts arbitrary Rust expressions in this position, but any expression other than a macro invocation will ultimately lead to an error because it is not expected by the built-in expression forms (e.g., `#[doc]`). Note that decorators and the like may be able to observe other expression forms.
### Expansion ordering
Expansion of macro expressions in "inert" attributes occurs after decorators have executed, analogously to macro expressions appearing in the function body or other parts of decorator input.
There is currently no way for decorators to accept macros in key-value position if macro expansion must be performed before the decorator executes (if the macro can simply be copied into the output for later expansion, that can work).
## Test cases
- https://github.com/rust-lang/rust/blob/master/src/test/ui/attributes/key-value-expansion-on-mac.rs
- https://github.com/rust-lang/rust/blob/master/src/test/rustdoc/external-doc.rs
The feature has also been dogfooded extensively in the compiler and
standard library:
- https://github.com/rust-lang/rust/pull/83329
- https://github.com/rust-lang/rust/pull/83230
- https://github.com/rust-lang/rust/pull/82641
- https://github.com/rust-lang/rust/pull/80534
## Implementation history
- Initial proposal: https://github.com/rust-lang/rust/issues/55414#issuecomment-554005412
- Experiment to see how much code it would break: https://github.com/rust-lang/rust/pull/67121
- Preliminary work to restrict expansion that would conflict with this
feature: https://github.com/rust-lang/rust/pull/77271
- Initial implementation: https://github.com/rust-lang/rust/pull/78837
- Fix for an ICE: https://github.com/rust-lang/rust/pull/80563
## Unresolved Questions
~~https://github.com/rust-lang/rust/pull/83366#issuecomment-805180738 listed some concerns, but they have been resolved as of this final report.~~
## Additional Information
There are two workarounds that have a similar effect for `#[doc]`
attributes on nightly. One is to emulate this behavior by using a limited version of this feature that was stabilized for historical reasons:
```rust
macro_rules! forward_inner_docs {
($e:expr => $i:item) => {
#[doc = $e]
$i
};
}
forward_inner_docs!(include_str!("lib.rs") => struct S {});
```
This also works for other attributes (like `#[path = concat!(...)]`).
The other is to use `doc(include)`:
```rust
#![feature(external_doc)]
#[doc(include = "lib.rs")]
struct S {}
```
The first works, but is non-trivial for people to discover, and
difficult to read and maintain. The second is a strange special-case for
a particular use of the macro. This generalizes it to work for any use
case, not just including files.
I plan to remove `doc(include)` when this is stabilized. The
`forward_inner_docs` workaround will still compile without warnings, but
I expect it to be used less once it's no longer necessary.
Simplify `cfg(any(unix, target_os="redox"))` in example to just `cfg(unix)`
Update example for `OsString` that handled `redox` seperately from `unix`: Redox has been completely integrated under `target_family="unix"`, so `cfg(unix)` implies `target_os="redox"`
35dbef2350/compiler/rustc_target/src/spec/redox_base.rs (L26)
Expand WASI abbreviation in docs
I was pretty sure this was related to something for WebAssembly but wasn't 100% sure so I checked but even on these top-level docs I couldn't find the abbreviation expanded. I'm normally used to Rust docs being detailed and explanatory and writing abbreviations like this out in full at least once so I thought it was worth the change. Feel free to close this if it's too much.
This avoids a zero-length write_str call, which boils down to a zero-length
memmove and ultimately costs quite a few instructions on some workloads.
This is approximately a 0.33% instruction count win on diesel-check.
Do not allocate or unwind after fork
### Objective scenarios
* Make (simple) panics safe in `Command::pre_exec_hook`, including most `panic!` calls, `Option::unwrap`, and array bounds check failures.
* Make it possible to `libc::fork` and then safely panic in the child (needed for the above, but this requirement means exposing the new raw hook API which the `Command` implementation needs).
* In singlethreaded programs, where panic in `pre_exec_hook` is already memory-safe, prevent the double-unwinding malfunction #79740.
I think we want to make panic after fork safe even though the post-fork child environment is only experienced by users of `unsafe`, beause the subset of Rust in which any panic is UB is really far too hazardous and unnatural.
#### Approach
* Provide a way for a program to, at runtime, switch to having panics abort. This makes it possible to panic without making *any* heap allocations, which is needed because on some platforms malloc is UB in a child forked from a multithreaded program (see https://github.com/rust-lang/rust/pull/80263#issuecomment-774272370, and maybe also the SuS [spec](https://pubs.opengroup.org/onlinepubs/9699919799/functions/fork.html)).
* Make that change in the child spawned by `Command`.
* Document the rules comprehensively enough that a programmer has a fighting chance of writing correct code.
* Test that this all works as expected (and in particular, that there aren't any heap allocations we missed)
Fixes#79740
#### Rejected (or previously attempted) approaches
* Change the panic machinery to be able to unwind without allocating, at least when the payload and message are both `'static`. This seems like it would be even more subtle. Also that is a potentially-hot path which I don't want to mess with.
* Change the existing panic hook mechanism to not convert the message to a `String` before calling the hook. This would be a surprising change for existing code and would not be detected by the type system.
* Provide a `raw_panic_hook` function to intercept panics in a way that doesn't allocate. (That was an earlier version of this MR.)
### History
This MR could be considered a v2 of #80263. Thanks to everyone who commented there. In particular, thanks to `@m-ou-se,` `@Mark-Simulacrum` and `@hyd-dev.` (Tagging you since I think you might be interested in this new MR.) Compared to #80263, this MR has very substantial changes and additions.
Additionally, I have recently (2021-04-20) completely revised this series following very helpful comments from `@m-ou-se.`
r? `@m-ou-se`
`core::iter::Repeat` always returns the same element, which means we can
do better than implementing most `Iterator` methods in terms of
`Iterator::next`.
Fixes#81292.
Some platforma (eg ARM64) apparently generate SIGTRAP for panic abort!
See eg
https://github.com/rust-lang/rust/pull/81858#issuecomment-840702765
This is probably a bug, but we don't want to entangle this MR with it.
When it's fixed, this commit should be reverted.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
add BITS associated constant to core::num::Wrapping
This keeps `Wrapping` synchronized with the primitives it wraps as for the #32463 `wrapping_int_impl` feature.
Remove rustc_args_required_const attribute
Now that stdarch no longer needs it (thanks `@Amanieu!),` we can kill the `rustc_args_required_const` attribute. This means that lifetime extension of references to temporaries is the only remaining job that promotion is performing. :-)
r? `@oli-obk`
Fixes https://github.com/rust-lang/rust/issues/69493
#[inline(always)] on basic pointer methods
Retryng #85201 with only inlining pointer methods. The goal is to make pointers behave just like pointers in O0, mainly to reduce overhead in debug builds.
cc `@scottmcm`
Add auto traits and clone trait migrations for RFC2229
This PR
- renames the existent RFC2229 migration `disjoint_capture_drop_reorder` to `disjoint_capture_migration`
- add additional migrations for auto traits and clone trait
Closesrust-lang/project-rfc-2229#29Closesrust-lang/project-rfc-2229#28
r? `@nikomatsakis`
It is unergnomic to have to say things like
bad.into_status().signal()
Implementing `ExitStatusExt` for `ExitStatusError` fixes this.
Unfortunately it does mean making a previously-infallible method
capable of panicing, although of course the existing impl remains
infallible.
The alternative would be a whole new `ExitStatusErrorExt` trait.
`<ExitStatus as ExitStatusExt>::into_raw()` is not particularly
ergonomic to call because of the often-required type annotation.
See for example the code in the test case in
library/std/src/sys/unix/process/process_unix/tests.rs
Perhaps we should provide equivalent free functions for `ExitStatus`
and `ExitStatusExt` in std::os::unix::process and maybe deprecate this
trait method. But I think that is for the future.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Closes#73125
This is in pursuance of
Issue #73127 Consider adding #[must_use] to std::process::ExitStatus
In
MR #81452 Add #[must_use] to [...] process::ExitStatus
we concluded that the existing arrangements in are too awkward
so adding that #[must_use] is blocked on improving the ergonomics.
I wrote a mini-RFC-style discusion of the approach in
https://github.com/rust-lang/rust/issues/73125#issuecomment-771092741
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
This PR implements span quoting, allowing proc-macros to produce spans
pointing *into their own crate*. This is used by the unstable
`proc_macro::quote!` macro, allowing us to get error messages like this:
```
error[E0412]: cannot find type `MissingType` in this scope
--> $DIR/auxiliary/span-from-proc-macro.rs:37:20
|
LL | pub fn error_from_attribute(_args: TokenStream, _input: TokenStream) -> TokenStream {
| ----------------------------------------------------------------------------------- in this expansion of procedural macro `#[error_from_attribute]`
...
LL | field: MissingType
| ^^^^^^^^^^^ not found in this scope
|
::: $DIR/span-from-proc-macro.rs:8:1
|
LL | #[error_from_attribute]
| ----------------------- in this macro invocation
```
Here, `MissingType` occurs inside the implementation of the proc-macro
`#[error_from_attribute]`. Previosuly, this would always result in a
span pointing at `#[error_from_attribute]`
This will make many proc-macro-related error message much more useful -
when a proc-macro generates code containing an error, users will get an
error message pointing directly at that code (within the macro
definition), instead of always getting a span pointing at the macro
invocation site.
This is implemented as follows:
* When a proc-macro crate is being *compiled*, it causes the `quote!`
macro to get run. This saves all of the sapns in the input to `quote!`
into the metadata of *the proc-macro-crate* (which we are currently
compiling). The `quote!` macro then expands to a call to
`proc_macro::Span::recover_proc_macro_span(id)`, where `id` is an
opaque identifier for the span in the crate metadata.
* When the same proc-macro crate is *run* (e.g. it is loaded from disk
and invoked by some consumer crate), the call to
`proc_macro::Span::recover_proc_macro_span` causes us to load the span
from the proc-macro crate's metadata. The proc-macro then produces a
`TokenStream` containing a `Span` pointing into the proc-macro crate
itself.
The recursive nature of 'quote!' can be difficult to understand at
first. The file `src/test/ui/proc-macro/quote-debug.stdout` shows
the output of the `quote!` macro, which should make this eaier to
understand.
This PR also supports custom quoting spans in custom quote macros (e.g.
the `quote` crate). All span quoting goes through the
`proc_macro::quote_span` method, which can be called by a custom quote
macro to perform span quoting. An example of this usage is provided in
`src/test/ui/proc-macro/auxiliary/custom-quote.rs`
Custom quoting currently has a few limitations:
In order to quote a span, we need to generate a call to
`proc_macro::Span::recover_proc_macro_span`. However, proc-macros
support renaming the `proc_macro` crate, so we can't simply hardcode
this path. Previously, the `quote_span` method used the path
`crate::Span` - however, this only works when it is called by the
builtin `quote!` macro in the same crate. To support being called from
arbitrary crates, we need access to the name of the `proc_macro` crate
to generate a path. This PR adds an additional argument to `quote_span`
to specify the name of the `proc_macro` crate. Howver, this feels kind
of hacky, and we may want to change this before stabilizing anything
quote-related.
Additionally, using `quote_span` currently requires enabling the
`proc_macro_internals` feature. The builtin `quote!` macro
has an `#[allow_internal_unstable]` attribute, but this won't work for
custom quote implementations. This will likely require some additional
tricks to apply `allow_internal_unstable` to the span of
`proc_macro::Span::recover_proc_macro_span`.
Change param name (k to key and v to value) in std::env module
1. When I was reading code the ide displayed `k` and `v`, so I
thought it would be better to show key and value?
2. I noticed var method already uses `key` instead of `k` so it
is more consistent to use `key` instead of `k`?
Thanks
BTree: no longer copy keys and values before dropping them
When dropping BTreeMap or BTreeSet instances, keys-value pairs are up to now each copied and then dropped, at least according to source code. This is because the code for dropping and for iterators is shared.
This PR postpones the treatment of doomed key-value pairs from the intermediate functions `deallocating_next`(`_back`) to the last minute, so the we can drop the keys and values in place. According to the library/alloc benchmarks, this does make a difference, (and a positive difference with an `#[inline]` on `drop_key_val`). It does not change anything for #81444 though.
r? `@Mark-Simulacrum`
Emit errors/warns on some wrong uses of rustdoc attributes
This PR adds a few diagnostics:
- error if conflicting `#[doc(inline)]`/`#[doc(no_inline)]` are found
- introduce the `invalid_doc_attributes` lint (warn-by-default) which triggers:
- if a crate-level attribute is used on a non-`crate` item
- if `#[doc(inline)]`/`#[doc(no_inline)]` is used on a non-`use` item
The code could probably be improved but I wanted to get feedback first. Also, some of those changes could be considered breaking changes, so I don't know what the procedure would be? ~~And finally, for the warnings, they are currently hard warnings, maybe it would be better to introduce a lint?~~ (EDIT: introduced the `invalid_doc_attributes` lint)
Closes#80275.
r? `@jyn514`
Provide io::Seek::rewind
Using `Seek::seek` is slightly clumsy because of the need to write (or import) `std::io::SeekFrom` to get at `SeekStart`. C already has `rewind` (although with broken error handling); we should have it too.
I'm motivated to do this because I've just found myself copy-pasting my 5-line extension trait between projects.
That the example ends up using `OpenOptions` makes this look like a niche use case, but it is very common to rewind temporary files. `tempfile` isn't available for use in this example or it would have looked shorter and more natural.
If this gets a positive reception I will open a tracking issue and update the feature gate.
Make unchecked_{add,sub,mul} inherent methods unstably const
The intrinsics are marked as being stably const (even though they're not stable by nature of being intrinsics), but the currently-unstable inherent versions are not marked as const. This fixes this inconsistency. Split out of #85017,
r? `@oli-obk`
Bump stdarch submodule
Major changes:
- More AVX-512 intrinsics.
- More ARM & AArch64 NEON intrinsics.
- Updated unstable WASM intrinsics to latest draft standards.
- Intrinsics that previously used `#[rustc_args_required_const]` now use const generics. See #83167 for more details.
- `std_detect` is now a separate crate instead of a submodule of `std`.
fork fails there. The failure message is confusing: so c.status()
returns an Err, the closure panics, and the test thinks the panic was
propagated from inside the child.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Co-authored-by: Mara Bos <m-ou.se@m-ou.se>
Rearrange SGX split module files
In #75979 several inlined modules were split out into multiple files.
This PR keeps the multiple files but moves a few things around to
organize things in a coherent way.
Cleanup of `wasm`
Some more cleanup of `sys`, this time `wasm`
- Reuse `unsupported::args` (functionally equivalent implementation, just an empty iterator).
- Split out `atomics` implementation of `wasm::thread`, the non-`atomics` implementation is reused from `unsupported`.
- Move all of the `atomics` code to a separate directory `wasm/atomics`.
````@rustbot```` label: +T-libs-impl
r? ````@m-ou-se````
In #75979 several inlined modules were split out into multiple files.
This PR keeps the multiple files but moves a few things around to
organize things in a coherent way.
This tests that we can indeed safely panic after fork, both
a raw libc::fork and in a Command pre_exec hook.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Co-authored-by: Mara Bos <m-ou.se@m-ou.se>
This is safe (does not involve heap allocation) but we don't yet have
a test to ensure that stays true. That will come in a moment.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Co-authored-by: Mara Bos <m-ou.se@m-ou.se>
Unwinding after fork() in the child is UB on some platforms, because
on those (including musl) malloc can be UB in the child of a
multithreaded program, and unwinding must box for the payload.
Even if it's safe, unwinding past fork() in the child causes whatever
traps the unwind to return twice. This is very strange and clearly
not desirable. With the default behaviour of the thread library, this
can even result in a panic in the child being transformed into zero
exit status (ie, success) as seen in the parent!
Fixes#79740.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
We must change the atomic read on panic entry to `Acquire`, to pick up
a possible an `always_panic` on another thread.
We add `count` to the names of panic_count::get and ::is_zaero,
because now there is another reason why panic ought to maybe abort.
Renaming these ensures that we have checked every call site to ensure
that they don't need further adjustment.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Co-authored-by: Mara Bos <m-ou.se@m-ou.se>
