If crate declares `rust_eh_personality`, re-use existing declaration
as otherwise attempts to set function attributes that follow the
declaration will fail (unless it happens to have exactly the same
type signature as the one predefined in the compiler).
only check cg defaults wf once instantiated
the previous fixmes here didn't make too much sense as I didn't yet fully understand the code further below.
That code only runs if the predicates using our generic param default are fully concrete after substituting our default, which never happens if our default is generic.
r? `@oli-obk` `@BoxyUwU`
Remove `missing_docs` lint on private 2.0 macros
798baebde1/compiler/rustc_lint/src/builtin.rs (L573-L584)
This code is the source of #57569. The problem is subtle, so let me point it out. This code makes the mistake of assuming that all of the macros in `krate.exported_macros` are exported.
...Yeah. For some historical reason, all `macro` macros are marked as exported, regardless of whether they actually are, which is dreadfully confusing. It would be more accurate to say that `exported_macros` currently contains only macros that have paths.
This PR renames `exported_macros` to `importable_macros`, since these macros can be imported with `use` while others cannot. It also fixes the code above to no longer lint on private `macro` macros, since the `missing_docs` lint should only appear on exported items.
Fixes#57569.
Add support for raw-dylib with stdcall, fastcall functions
Next stage of work for #58713: allow `extern "stdcall"` and `extern "fastcall"` with `#[link(kind = "raw-dylib")]`.
I've deliberately omitted support for vectorcall, as that doesn't currently work, and I wanted to get this out for review. (I haven't really investigated the vectorcall failure much yet, but at first (very cursory) glance it appears that the problem is elsewhere.)
Simply shift the bitcast from the store to the load, so that
we can use the destination type. I'm not sure the bitcast is
really necessary, but keeping it for now.
I'm not really sure what is wrong here, but I was getting load
type mismatches in the debuginfo code (which is the only place
using this function).
Replacing the project_deref() implementation with a generic
load_operand + deref did the trick.
This makes load generation compatible with opaque pointers.
The generation of nontemporal copies still accesses the pointer
element type, as fixing this requires more movement.
- Closures in external crates may get compiled in because of
monomorphization. We should store names of captured variables
in `optimized_mir`, so that they are written into the metadata
file and we can use them to generate debuginfo.
- If there are breakpoints inside closures, the names of captured
variables stored in `optimized_mir` can be used to print them.
Now the name is more precise when disjoint fields are captured.
Previously, debuggers print closures as something like
```
y::main::closure-0 (0x7fffffffdd34)
```
The pointer actually references to an upvar. It is not
very obvious, especially for beginners.
It's because upvars don't have names before, as they
are packed into a tuple. This commit names the upvars,
so we can expect to see something like
```
y::main::closure-0 {_captured_ref__b: 0x[...]}
```
Use #[track_caller] in const panic diagnostics.
This change stops const panic diagnostics from reporting inside #[track_caller] functions by skipping over them.
Change linked tracking issue for more_qualified_paths
This updates the linked tracking issue for the `more_qualified_paths` feature from the implementation PR #80080 to an actual tracking issue #86935.
Fix double warning about illegal floating-point literal pattern
This PR fixes#86600. The problem is that the `ConstToPat` struct contains a field `include_lint_checks`, which determines whether lints should be emitted or not, but this field is currently not obeyed at one point, leading to a warning being emitted more than once. I have fixed this behavior here.
Account for capture kind in auto traits migration
Modifies the current auto traits migration for RFC2229 so it takes into account capture kind
Closes https://github.com/rust-lang/project-rfc-2229/issues/51
r? `@nikomatsakis`
2229: Reduce the size of closures with `capture_disjoint_fields`
One key observation while going over the closure size profile of rustc
was that we are disjointly capturing one or more fields starting at an
immutable reference.
Disjoint capture over immutable reference doesn't add too much value
because the fields can either be borrowed immutably or copied.
One possible edge case of the optimization is when a fields of a struct
have a longer lifetime than the structure, therefore we can't completely
get rid of all the accesses on top of sharef refs, only the rightmost
one. Here is a possible example:
```rust
struct MyStruct<'a> {
a: &'static A,
b: B,
c: C<'a>,
}
fn foo<'a, 'b>(m: &'a MyStruct<'b>) -> impl FnMut() + 'static {
let c = || drop(&*m.a.field_of_a);
// Here we really do want to capture `*m.a` because that outlives `'static`
// If we capture `m`, then the closure no longer outlives `'static'
// it is constrained to `'a`
}
```
r? `@nikomatsakis`
- Add `:Sized` assertion in interpreter impl
- Use `Scalar::from_bool` instead of `ScalarInt: From<bool>`
- Remove unneeded comparison in intrinsic typeck
- Make this UB to call with undef, not just return undef in that case
LLVM target name does not necessarily match the Rust target name and it
can be confusing when the ICE message is describing a target other than
has been specified on the command line.
Checking that function is const if marked with rustc_const_unstable
Fixes#69630
This one is still missing tests to check the behavior but I checked by hand and it seemed to work.
I would not mind some direction for writing those unit tests!
Use diagnostic items instead of lang items for rfc2229 migrations
This PR removes the `Send`, `UnwindSafe` and `RefUnwindSafe` lang items introduced in https://github.com/rust-lang/rust/pull/84730, and uses diagnostic items instead to check for `Send`, `UnwindSafe` and `RefUnwindSafe` traits for RFC2229 migrations.
r? ```@nikomatsakis```
remove trailing newline
fix: test with attribute but missing const
Update compiler/rustc_passes/src/stability.rs
Co-authored-by: Léo Lanteri Thauvin <leseulartichaut@gmail.com>
Add test for extern functions
fix: using span_help instead of span_suggestion
add test for some ABIs + fmt fix
Update compiler/rustc_passes/src/stability.rs
Co-authored-by: Léo Lanteri Thauvin <leseulartichaut@gmail.com>
Refractor and add test for `impl const`
Add test to make sure no output + cleanup condition
-----------------------------
remove stdcall test, failing CI test
C abi is already tested in this, so it is not that useful to test another one.
The tested code is blind to which specific ABI for now, as long as it's not an intrinsic one
Fix ICE when misplaced visibility cannot be properly parsed
Fixes#86895
The issue was that a failure to parse the visibility was causing the original error to be dropped before being emitted.
The resulting error isn't quite as nice as when the visibility is parsed properly, but I'm not sure which error to prioritize here. Displaying both errors might be too confusing.
r? ```@estebank```
Sync rustc_codegen_cranelift
The main hightlight this sync is basic support for AArch64. Most things should work on Linux, but there does seem to be an ABI incompatibility causing proc-macros to crash, see https://github.com/bjorn3/rustc_codegen_cranelift/issues/1184. Thanks to ```@afonso360``` for implementing all Cranelift features that were necessary to compile for AArch64 using cg_clif. Also thanks to ```@shamatar``` for implementing the `llvm.x86.addcarry.64` and `llvm.x86.subborrow.64` llvm intrinsics used by num-bigint (https://github.com/bjorn3/rustc_codegen_cranelift/pull/1178) and ```@eggyal``` for implementing multi-threading support for the lazy jit mode. (https://github.com/bjorn3/rustc_codegen_cranelift/pull/1166)
r? ```@ghost```
```@rustbot``` label +A-codegen +A-cranelift +T-compiler
Recover from `&dyn mut ...` parse errors
Consider this example:
```rust
fn main() {
let r: &dyn mut Trait;
}
```
This currently leads to:
```
error: expected one of `!`, `(`, `;`, `=`, `?`, `for`, lifetime, or path, found keyword `mut`
--> src/main.rs:2:17
|
2 | let r: &dyn mut Trait;
| ^^^ expected one of 8 possible tokens
error: aborting due to previous error
```
However, especially for beginners, I think it is easy to get `&dyn mut` and `&mut dyn` confused. With my changes, I get a help message, and the parser even recovers:
```
error: `mut` must precede `dyn`
--> test.rs:2:12
|
2 | let r: &dyn mut Trait;
| ^^^^^^^^ help: place `mut` before `dyn`: `&mut dyn`
error[E0405]: cannot find trait `Trait` in this scope
--> test.rs:2:21
|
2 | let r: &dyn mut Trait;
| ^^^^^ not found in this scope
error: aborting due to 2 previous errors
```
Support lint tool names in rustc command line options
When rustc is running without a lint tool such as clippy enabled, options for lints such as `clippy::foo` are meant to be ignored. This was already working for those specified by attrs, such as `#![allow(clippy::foo)]`, but this did not work for command line arguments like `-A clippy::foo`. This PR fixes that issue.
Note that we discovered this issue while discussing https://github.com/rust-lang/cargo/issues/5034.
Fixes#86628.
This change merges `check_lint_and_tool_name` into `check_lint_name` in
order to avoid having two very similar functions.
Also adds the `.stderr` file back for the test case, since apparently
it is still needed.
All eabi targets have target_abi = "eabi".
All eabihf targets have target_abi = "eabihf".
armv6_unknown_freebsd and armv7_unknown_freebsd have target_abi = "eabihf".
All abi64 targets have target_abi = "abi64".
All ilp32 targets have target_abi = "ilp32".
All softfloat targets have target_abi = "softfloat".
All *-uwp-windows-* targets have target_abi = "uwp".
All spe targets have target_abi = "spe".
All macabi targets have target_abi = "macabi".
aarch64-apple-ios-sim has target_abi = "sim".
x86_64-fortanix-unknown-sgx has target_abi = "fortanix".
x86_64-unknown-linux-gnux32 has target_abi = "x32".
Add FIXME entries for targets for which existing values need to change
once cfg_target_abi becomes stable. (All of them are tier 3 targets.)
Add a test for target_abi in `--print cfg`.
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
This does not add an abi to any existing target.
Rename some Rust 2021 lints to better names
Based on conversation in https://github.com/rust-lang/rust/issues/85894.
Rename a bunch of Rust 2021 related lints:
Lints that are officially renamed because they are already in beta or stable:
* `disjoint_capture_migration` => `rust_2021_incompatible_closure_captures`
* `or_patterns_back_compat` => `rust_2021_incompatible_or_patterns`
* `non_fmt_panic` => `non_fmt_panics`
Lints that are renamed but don't require any back -compat work since they aren't yet in stable:
* `future_prelude_collision` => `rust_2021_prelude_collisions`
* `reserved_prefix` => `rust_2021_token_prefixes`
Lints that have been discussed but that I did not rename:
* ~`non_fmt_panic` and `bare_trait_object`: is making this plural worth the headache we might cause users?~
* `array_into_iter`: I'm unsure of a good name and whether bothering users with a name change is worth it.
r? `@nikomatsakis`
Refactor linker code
This merges `LinkerInfo` into `CrateInfo` as there is no reason to keep them separate. `LinkerInfo::to_linker` is merged into `get_linker` as both have different logic for each linker type and `to_linker` is directly called after `get_linker`. Also contains a couple of small cleanups.
See the individual commits for all changes.
The `large_assignments` lints detects moves over specified limit. The
limit is configured through `move_size_limit = "N"` attribute placed at
the root of a crate. When attribute is absent, the lint is disabled.
Make it possible to enable the lint without making any changes to the
source code, through a new flag `-Zmove-size-limit=N`. For example, to
detect moves exceeding 1023 bytes in a cargo crate, including all
dependencies one could use:
```
$ env RUSTFLAGS=-Zmove-size-limit=1024 cargo build -vv
```
Replace per-target ABI denylist with an allowlist
It makes very little sense to maintain denylists of ABIs when, as far as
non-generic ABIs are concerned, targets usually only support a small
subset of the available ABIs.
This has historically been a cause of bugs such as us allowing use of
the platform-specific ABIs on x86 targets – these in turn would cause
LLVM errors or assertions to fire.
In this PR we got rid of the per-target ABI denylists, and instead compute
which ABIs are supported with a simple match based on, mostly, the
`Target::arch` field. Among other things, this makes it impossible to
forget to consider this problem (in either direction) and forces one to
consider what the ABI support looks like when adding an ABI (rarely)
rather than target (often), which should hopefully also reduce the
cognitive load on both contributors as well as reviewers.
Fixes#57182
Sponsored by: standard.ai
---
## Summary for teams
One significant user-facing change after this PR is that there's now a future compat warning when building…
* `stdcall`, `fastcall`, `thiscall` using code with targets other than 32-bit x86 (i386...i686) or *-windows-*;
* `vectorcall` using code when building for targets other than x86 (either 32 or 64 bit) or *-windows-*.
Previously these ABIs have been accepted much more broadly, even for architectures and targets where this made no sense (e.g. on wasm32) and would fall back to the C ABI. In practice this doesn't seem to be used too widely and the [breakages in crater](https://github.com/rust-lang/rust/pull/86231#issuecomment-866300943) that we see are mostly about Windows-specific code that was missing relevant `cfg`s and just happened to successfully `check` on Linux for one reason or another.
The intention is that this warning becomes a hard error after some time.
It makes very little sense to maintain denylists of ABIs when, as far as
non-generic ABIs are concerned, targets usually only support a small
subset of the available ABIs.
This has historically been a cause of bugs such as us allowing use of
the platform-specific ABIs on x86 targets – these in turn would cause
LLVM errors or assertions to fire.
Fixes#57182
Sponsored by: standard.ai
Query-ify global limit attribute handling
Currently, we read various 'global limits' from inner attributes the crate root (`recursion_limit`, `move_size_limit`, `type_length_limit`, `const_eval_limit`). These limits are then stored in `Sessions`, allowing them to be access from a `TyCtxt` without registering a dependency on the crate root attributes.
This PR moves the calculation of these global limits behind queries, so that we properly track dependencies on crate root attributes. During the setup of macro expansion (before we've created a `TyCtxt`), we need to access the recursion limit, which is now done by directly calling into the code shared by the normal query implementations.
E0716: clarify that equivalent code example is erroneous
In E0716, there is a code block that is equivalent to the erroneous
code example. Especially when viewed with `rustc --explain`, it's
not obvious that it is also erroneous, and some users have been
confused when they try to change their code to match the erroneous
equivalent.
`@rustbot` label +A-diagnostics +D-newcomer-roadblock +T-compiler
Hack: Ignore inference variables in certain queries
Fixes#84841Fixes#86753
Some queries are not built to accept types with inference variables, which can lead to ICEs. These queries probably ought to be converted to canonical form, but as a quick workaround, we can return conservative results in the case that inference variables are found.
We should file a follow-up issue (and update the FIXMEs...) to do the proper refactoring.
cc `@arora-aman`
r? `@oli-obk`
In E0716, there is a code block that is equivalent to the erroneous
code example. Especially when viewed with `rustc --explain`, it's
not obvious that it is also erroneous, and some users have been
confused when they try to change their code to match the erroneous
equivalent.
Support allocation failures when interpreting MIR
This closes#79601 by handling the case where memory allocation fails during MIR interpretation, and translates that failure into an `InterpError`. The error message is "tried to allocate more memory than available to compiler" to make it clear that the memory shortage is happening at compile-time by the compiler itself, and that it is not a runtime issue.
Now that memory allocation can fail, it would be neat if Miri could simulate low-memory devices to make it easy to see how much memory a Rust program needs.
Note that this breaks Miri because it assumes that allocation can never fail.
Warn when `rustdoc::` group is omitted from lint names
When rustdoc lints were first made a tool lint, they gave an unconditional warning when you used the original name:
```
warning: lint `broken_intra_doc_links` has been renamed to `rustdoc::broken_intra_doc_links`
--> $DIR/renamed-lint-still-applies.rs:2:9
|
LL | #![deny(broken_intra_doc_links)]
| ^^^^^^^^^^^^^^^^^^^^^^ help: use the new name: `rustdoc::broken_intra_doc_links`
|
= note: `#[warn(renamed_and_removed_lints)]` on by default
```
That was reverted in https://github.com/rust-lang/rust/pull/83203 because adding `rustdoc::x` lints would cause the code to break on old versions of the compiler (due to https://github.com/rust-lang/rust/issues/66079#issuecomment-788589193, "fixed" in https://github.com/rust-lang/rust/pull/83216 in the sense that you can now opt-in to not breaking on nightly, which is not ideal but `register_tool` is a long way from stabilizing). Since https://github.com/rust-lang/rust/pull/80527 is now on 1.52.0 stable, we can re-enable the warning. For nightly users, they can change immediately and still have their code work on stable; for stable users, they can change their code in 12 weeks and still have it work up to 3 releases back (about 18 weeks). That seems reasonable to me.
r? `@Manishearth` cc `@rust-lang/rustdoc`
Return `EvaluatedToOk` when type in outlives predicate is global
A global type doesn't reference any local regions or types, so it's
guaranteed to outlive any region.
Avoid byte to char position conversions in `is_multiline`
Converting a byte position into a char position is currently linear in
the number of multibyte characters in the source code. Avoid it when
checking if a range spans across lines.
This makes it feasible to compile source files with a large number of
multibyte characters.
deny using default function in impl const Trait
Fixes#79450.
I don't know if my implementation is correct:
- The check is in `rustc_passes::check_const`, should I put it somewhere else instead?
- Is my approach (to checking the impl) optimal? It works for the current tests, but it might have some issues or there might be a better way of doing this.
Fix const-generics ICE related to binding
Fixes#83765, fixes#85848
r? `@jackh726` as you're familiar with `Binding`. I'd like to get some views if the current approach is right path.
Previously, only the fields would be displayed with no indication of the
variant name. If you already knew the enum was univariant, this was ok
but if the enum was univariant because of layout, for example, a
`Result<T, !>` then it could be very confusing which variant was the
active one.
Previously, directly tagged enums had a `variant$` field which would
show the name of the active variant. We now show the variant using a
`[variant]` synthetic item just like we do for niche-layout enums.
Rollup of 7 pull requests
Successful merges:
- #84029 (add `track_path::path` fn for usage in `proc_macro`s)
- #85001 (Merge `sys_common::bytestring` back into `os_str_bytes`)
- #86308 (Docs: clarify that certain intrinsics are not unsafe)
- #86796 (Add a regression test for issue-70703)
- #86803 (Remove & from Command::args calls in documentation)
- #86807 (Fix double import in wasm thread )
- #86813 (Add a help message to `unused_doc_comments` lint)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add a help message to `unused_doc_comments` lint
Fixes#83492
This adds a help message to suggest a plain comment like the E0658 error. I've yet to come up with the best message about the doc attribute but the current shouldn't harm anything.
I was thinking of recovering in the `doc_comment_between_if_else` case, but I came to the conclusion that it unlikely happened and was an overkill.
add `track_path::path` fn for usage in `proc_macro`s
Adds a way to declare a dependency on external files without including them, to either re-trigger the build of a file as well as covering the use case of including dependencies within the `rustc` invocation, such that tools like `sccache`/`cachepot` are able to handle references to external files which are not included.
Ref #73921
Improve debug symbol names to avoid ambiguity and work better with MSVC's debugger
There are several cases where names of types and functions in the debug info are either ambiguous, or not helpful, such as including ambiguous placeholders (e.g., `{{impl}}`, `{{closure}}` or `dyn _'`) or dropping qualifications (e.g., for dynamic types).
Instead, each debug symbol name should be unique and useful:
* Include disambiguators for anonymous `DefPathDataName` (closures and generators), and unify their formatting when used as a path-qualifier vs item being qualified.
* Qualify the principal trait for dynamic types.
* If there is no principal trait for a dynamic type, emit all other traits instead.
* Respect the `qualified` argument when emitting ref and pointer types.
* For implementations, emit the disambiguator.
* Print const generics when emitting generic parameters or arguments.
Additionally, when targeting MSVC, its debugger treats many command arguments as C++ expressions, even when the argument is defined to be a symbol name. As such names in the debug info need to be more C++-like to be parsed correctly:
* Avoid characters with special meaning (`#`, `[`, `"`, `+`).
* Never start a name with `<` or `{` as this is treated as an operator.
* `>>` is always treated as a right-shift, even when parsing generic arguments (so add a space to avoid this).
* Emit function declarations using C/C++ style syntax (e.g., leading return type).
* Emit arrays as a synthetic `array$<type, size>` type.
* Include a `$` in all synthetic types as this is a legal character for C++, but not Rust (thus we avoid collisions with user types).
Implement printing of stack traces on LLVM segfaults and aborts
Implement #79153
Based on discussion, try to extend the rust_backtrace=1 feature to handle segfault or aborts in the llvm backend
Include terminators in instance size estimate
For example, drop glue generated for struct below, doesn't have any
statements, only terminators. Previously it received an estimate of 0,
the new estimate is 13 (6+5 drop terminators, +1 resume, +1 return).
```rust
struct S {
a: String,
b: String,
c: String,
d: String,
e: String,
f: String,
}
```
Originally reported in https://github.com/rust-lang/rust/issues/69382#issue-569392141
Check the number of generic lifetime and const parameters of intrinsics
This pull request fixes#85855. The current code for type checking intrinsics only checks the number of generic _type_ parameters, but does not check for an incorrect number of lifetime or const parameters, which can cause problems later on, such as the ICE in #85855, where the code thought that it was looking at a type parameter but found a lifetime parameter:
```
error: internal compiler error: compiler/rustc_middle/src/ty/generics.rs:188:18:
expected type parameter, but found another generic parameter
```
The changes in this PR add checks for the number of lifetime and const parameters, expand the scope of `E0094` to also apply to these cases, and improve the error message by properly pluralizing the number of expected generic parameters.
Also an fix issue with tuple type names where we can't cast to them in
natvis (required by the visualizer for `HashMap`) because of
peculiarities with the natvis expression evaluator.
For example, drop glue generated for struct below, doesn't have any
statements, only terminators. Previously it received an estimate of 0,
the new estimate is 13 (6+5 drop terminators, +1 resume, +1 return).
struct S {
a: String,
b: String,
c: String,
d: String,
e: String,
f: String,
}
Originally reported in https://github.com/rust-lang/rust/issues/69382#issue-569392141
Converting a byte position into a char position is currently linear in
the number of multibyte characters in the source code. Avoid it when
checking if a range spans across lines.
This makes it feasible to compile source files with a large number of
multibyte characters.
Fix misleading "impl Trait" error
The kinds can't be compared directly, as types with references are treated as different because the lifetimes aren't bound in ty, but are in expected.
Closes#84160
Add support for leaf function frame pointer elimination
This PR adds ability for the target specifications to specify frame
pointer emission type that's not just “always” or “whatever cg decides”.
In particular there's a new mode that allows omission of the frame
pointer for leaf functions (those that don't call any other functions).
We then set this new mode for Aarch64-based Apple targets.
Fixes#86196
rustc_span: Explicitly handle crates that differ from package names
The sha-1 and md-5 packages contain crates named sha1 and md5,
respectively. This discrepancy makes it somewhat more challenging to
automate detection of unused crates. Explicitly rename the packages to
the names of the crates they contain, to simplify such detection.
Add suggestions for "undefined reference" link errors
This adds a suggestion for "undefined reference to ..." linking errors to install or specify the location to an external library. Since there is no defined error format for linkers, we just check if there was a failure and if that failure contains the string `undefined reference to`. This also makes it impossible to test this, since the output depends on the system linker. The output now looks like:
```
error: linking with `cc` failed: exit status: 1
|
= note: "cc" "-m64" "linking_failure.linking_failure.7rcbfp3g-cgu.0.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.1.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.2.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.3.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.4.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.5.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.6.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.7.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.8.rcgu.o" "linking_failure.53u64zklswtfazes.rcgu.o" "-Wl,--as-needed" "-L" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib" "-Wl,--start-group" "-Wl,-Bstatic" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libstd-01ce3ba5c629d02f.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libpanic_unwind-f1f2102409186354.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libminiz_oxide-1e8b6b56a999f838.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libadler-d0e93eb4e14f1d19.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libobject-1d7e39d75d082b43.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libaddr2line-ade42e945045b261.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libgimli-1a65064fccf4ebc1.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libstd_detect-4d699c310fdfe72d.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_demangle-1cafa68a696ec800.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libhashbrown-e9f1c8c4dab2f046.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_std_workspace_alloc-ecc1a743be25c7f7.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libunwind-e074031c4b66b6b6.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcfg_if-9aa6ed9f1d3bfd53.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/liblibc-7862bf96c2250ca0.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/liballoc-f02ce0dc7895b5fd.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_std_workspace_core-3af9c60917570521.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcore-ca16fc7bb3645684.rlib" "-Wl,--end-group" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcompiler_builtins-d8e1a5b7299604cc.rlib" "-Wl,-Bdynamic" "-lgcc_s" "-lutil" "-lrt" "-lpthread" "-lm" "-ldl" "-lc" "-Wl,--eh-frame-hdr" "-Wl,-znoexecstack" "-L" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib" "-o" "linking_failure" "-Wl,--gc-sections" "-pie" "-Wl,-zrelro" "-Wl,-znow" "-nodefaultlibs"
= note: /usr/bin/ld: linking_failure.linking_failure.7rcbfp3g-cgu.3.rcgu.o: in function `linking_failure::main':
linking_failure.7rcbfp3g-cgu.3:(.text._ZN15linking_failure4main17h52b6e3052e444479E+0x3): undefined reference to `doesnt_exist_thiwthwfyl'
clang: error: linker command failed with exit code 1 (use -v to see invocation)
= help: some `extern` functions couldn't be found; you may need to install or specify the path to some dependencies
= note: use the -L flag to specify the library lookup path
= note: use the cargo:rustc-link-search directive to specify the library lookup path with Cargo (see https://doc.rust-lang.org/cargo/reference/build-scripts.html#rustc-link-search)
error: aborting due to previous error
```
Fix ICE when `main` is declared in an `extern` block
Changes in #84401 to implement `imported_main` changed how the crate entry point is found, and a declared `main` in an `extern` block was detected erroneously. This was causing the ICE described in #86110.
This PR adds a check for this case and emits an error instead. Previously a `main` declaration in an `extern` block was not detected as an entry point at all, so emitting an error shouldn't break anything that worked previously. In 1.52.1 stable this is demonstrated, with a `` `main` function not found`` error.
Fixes#86110
Remove unused dependencies from compiler crates
Various compiler crates have dependencies that they don't appear to use. I used some scripting to detect such dependencies, filtered them based on some manual review, and removed those that do indeed appear to be entirely unused.
Test cross-crate usage of `feature(const_trait_impl)`
This PR does two things:
- Fixes metadata not encoded properly for functions in const trait impls.
- Adds tests for using const trait impls cross-crate with the feature gate on the user crate either enabled or disabled.
AFAIK, this means we can now constify some trait impls in the standard library 🎉
See #67792 for the tracking issue, cc `@oli-obk`
Check node kind to avoid ICE in `check_expr_return()`
This PR fixes#86721. The ICE described there is apparently due to a misunderstanding:
e98897e5dc/compiler/rustc_typeck/src/check/expr.rs (L684-L685)
Intuitively, one would think that calling `expect_item()` after `get_parent_item()` should succeed, but as it turns out, `get_parent_item()` can also return foreign, trait, and impl items as well as crates, whereas `expect_item()` specifically expects a `Node::Item`. I have therefore added an extra check to prevent this ICE.
There are several cases where names of types and functions in the debug info are either ambiguous, or not helpful, such as including ambiguous placeholders (e.g., `{{impl}}`, `{{closure}}` or `dyn _'`) or dropping qualifications (e.g., for dynamic types).
Instead, each debug symbol name should be unique and useful:
* Include disambiguators for anonymous `DefPathDataName` (closures and generators), and unify their formatting when used as a path-qualifier vs item being qualified.
* Qualify the principal trait for dynamic types.
* If there is no principal trait for a dynamic type, emit all other traits instead.
* Respect the `qualified` argument when emitting ref and pointer types.
* For implementations, emit the disambiguator.
* Print const generics when emitting generic parameters or arguments.
Additionally, when targeting MSVC, its debugger treats many command arguments as C++ expressions, even when the argument is defined to be a symbol name. As such names in the debug info need to be more C++-like to be parsed correctly:
* Avoid characters with special meaning (`#`, `[`, `"`, `+`).
* Never start a name with `<` or `{` as this is treated as an operator.
* `>>` is always treated as a right-shift, even when parsing generic arguments (so add a space to avoid this).
* Emit function declarations using C/C++ style syntax (e.g., leading return type).
* Emit arrays as a synthetic `array$<type, size>` type.
* Include a `$` in all synthetic types as this is a legal character for C++, but not Rust (thus we avoid collisions with user types).
This PR adds ability for the target specifications to specify frame
pointer emission type that's not just “always” or “whatever cg decides”.
In particular there's a new mode that allows omission of the frame
pointer for leaf functions (those that don't call any other functions).
We then set this new mode for Aarch64-based Apple targets.
Fixes#86196
Introduce -Zprofile-closures to evaluate the impact of 2229
This creates a CSV with name "closure_profile_XXXXX.csv", where the
variable part is the process id of the compiler.
To profile a cargo project you can run one of the following depending on
if you're compiling a library or a binary:
```
cargo +nightly rustc --lib -- -Zprofile-closures
cargo +nightly rustc --bin {binary_name} -- -Zprofile-closures
```
r? `@nikomatsakis`
Only include lint in future_incompatible lint group if not an edition lint
A follow up to #86330 - this only includes lints annotated with `FutureIncompatibleInfo` in the `future_incompatibile` lint group if the future compatibility is not tied to an edition.
We probably want to rename `FutureIncompatibleInfo` to something else since this type is now used to indicate future breakages of all kinds (even those that happen in editions). I'd prefer to do that in a separate PR though.
r? `@nikomatsakis`
Change vtable memory representation to use tcx allocated allocations.
This fixes https://github.com/rust-lang/rust/issues/86324. However i suspect there's more to change before it can land.
r? `@bjorn3`
cc `@rust-lang/miri`
One key observation while going over the closure size profile of rustc
was that we are disjointly capturing one or more fields starting at an
immutable reference.
Disjoint capture over immutable reference doesn't add too much value
because the fields can either be borrowed immutably or copied.
One possible edge case of the optimization is when a fields of a struct
have a longer lifetime than the structure, therefore we can't completely
get rid of all the accesses on top of sharef refs, only the rightmost
one. Here is a possible example:
```rust
struct MyStruct<'a> {
a: &'static A,
b: B,
c: C<'a>,
}
fn foo<'a, 'b>(m: &'a MyStruct<'b>) -> impl FnMut() + 'static {
let c = || drop(&*m.a.field_of_a);
// Here we really do want to capture `*m.a` because that outlives `'static`
// If we capture `m`, then the closure no longer outlives `'static'
// it is constrained to `'a`
}
```
Don't make `rustc_insignificant_dtor` feature gate
This isn't a feature gate, it's an attribute that is feature gated behind the `rustc_attrs` attribute. Closes#85680.
Fix garbled suggestion for missing lifetime specifier
This PR fixes#86667. The suggestion code currently checks whether there is a generic parameter that is not a synthetic `impl Trait` parameter and, if so, suggests to insert a new lifetime `'a` before that generic parameter. However, it does not make sense to insert `'a` in front of an elided lifetime parameter, since these are synthetic as well, which leads to the garbled suggestion in #86667.
Turn non_fmt_panic into a future_incompatible edition lint.
This turns the `non_fmt_panic` lint into a future_incompatible edition lint, so it becomes part of the `rust_2021_compatibility` group. See https://github.com/rust-lang/rust/issues/85894.
This lint produces both warnings about semantical changes (e.g. `panic!("{{")`) and things that will become hard errors (e.g. `panic!("{")`). So I added a `explain_reason: false` that supresses the default "this will become a hard error" or "the semantics will change" message, and instead added a note depending on the situation. (cc `@rylev)`
r? `@nikomatsakis`
Fix `future_prelude_collision` false positive
Fixes#86633
The lint for checking if method resolution of methods named `try_into` will fail in 2021 edition previously would fire on all inherent methods, however for inherent methods that consume `self`, this takes priority over `TryInto::try_into` due to being inherent, while trait method and methods that take `&self` or `&mut self` don't take priority, and thus aren't affected by this false positive.
This fix is rather simple: simply checking if the inherent method doesn't auto-deref or auto-ref (and thus takes `self`) and if so, prevents the lint from firing.
This prevents mistakes where the feature is in the list of incomplete
features but not actually a feature by making the incompleteness a part
of the declaration.
This creates a CSV with name "closure_profile_XXXXX.csv", where the
variable part is the process id of the compiler.
To profile a cargo project you can run one of the following depending on
if you're compiling a library or a binary:
```
cargo +stage1 rustc --lib -- -Zprofile-closures
cargo +stage1 rustc --bin -- -Zprofile-closures
```
Fix type checking of return expressions outside of function bodies
This pull request fixes#86188. The problem is that the current code for type-checking `return` expressions stops if the `return` occurs outside of a function body, while the correct behavior is to continue type-checking the return value expression (otherwise an ICE happens later on because variables declared in the return value expression don't have a type).
Also, I have noticed that it is sometimes not obvious why a `return` is outside of a function body; for instance, in the example from #86188 (which currently causes an ICE):
```rust
fn main() {
[(); return || {
let tx;
}]
}
```
I have changed the error message to also explain why the `return` is considered outside of the function body:
```
error[E0572]: return statement outside of function body
--> ice0.rs:2:10
|
1 | / fn main() {
2 | | [(); return || {
| |__________^
3 | || let tx;
4 | || }]
| ||_____^ the return is part of this body...
5 | | }
| |_- ...not the enclosing function body
```
Reserve prefixed identifiers and literals (RFC 3101)
This PR denies any identifiers immediately followed by one of three tokens `"`, `'` or `#`, which is stricter than the requirements of RFC 3101 but may be necessary according to the discussion at [Zulip].
[Zulip]: https://rust-lang.zulipchat.com/#narrow/stream/268952-edition-2021/topic/reserved.20prefixes/near/238470099
The tracking issue #84599 says we'll add a feature gate named `reserved_prefixes`, but I don't think I can do this because it is impossible for the lexer to know whether a feature is enabled or not. I guess determining the behavior by the edition information should be enough.
Fixes#84599
2229: Capture box completely in move closures
Even if the content from box is used in a sharef-ref context,
we capture the box entirerly.
This is motivated by:
1) We only capture data that is on the stack.
2) Capturing data from within the box might end up moving more data than
the user anticipated.
Closes https://github.com/rust-lang/project-rfc-2229/issues/50
r? `@nikomatsakis`
Fix ICE with `-Zunpretty=hir,typed`
This PR fixes#82328. The `-Zunpretty=hir,typed` pretty-printer maintains an `Option` with type-checking results and sets the `Option` to `Some` when entering a body. However, this leads to an ICE if an expression occurs in a function signature (i.e. outside of a body), such as `128` in
```rust
fn foo(-128..=127: i8) {}
```
This PR fixes the ICE by checking (if necessary) whether the expression's owner has a body, and retrieving type-checking results for that on the fly.
Allow loading of llvm plugins on nightly
Based on a discussion in #82734 / with `@wsmoses.`
Mainly moves [this](0149bc4e7e) behind a -Z flag, so it can only be used on nightly,
as requested by `@nagisa` in https://github.com/rust-lang/rust/issues/82734#issuecomment-835863940
This change allows loading of llvm plugins like Enzyme.
Right now it also requires a shared library LLVM build of rustc for symbol resolution.
```rust
// test.rs
extern { fn __enzyme_autodiff(_: usize, ...) -> f64; }
fn square(x : f64) -> f64 {
return x * x;
}
fn main() {
unsafe {
println!("Hello, world {} {}!", square(3.0), __enzyme_autodiff(square as usize, 3.0));
}
}
```
```
./rustc test.rs -Z llvm-plugins="./LLVMEnzyme-12.so" -C passes="enzyme"
./test
Hello, world 9 6!
```
I will try to figure out how to simplify the usage and get this into stable in a later iteration,
but having this on nightly will already help testing further steps.
Use HTTPS links where possible
While looking at #86583, I wondered how many other (insecure) HTTP links were in `rustc`. This changes most other `http` links to `https`. While most of the links are in comments or documentation, there are a few other HTTP links that are used by CI that are changed to HTTPS.
Notes:
- I didn't change any to or in licences
- Some links don't support HTTPS :(
- Some `http` links were dead, in those cases I upgraded them to their new places (all of which used HTTPS)
Check that `#[cmse_nonsecure_entry]` is applied to a function definition
This PR fixes#83475. The compiler currently neglects to check whether `#[cmse_nonsecure_entry]` is applied to a function (and not, say, a struct) definition, leading to an ICE later on when the type checker attempts to retrieve the function signature. I have fixed this problem by adding an appropriate check to the `check_attr` pass, so that an error is reported instead of an ICE.
Rollup of 5 pull requests
Successful merges:
- #86330 (Change how edition based future compatibility warnings are handled)
- #86513 (Rustdoc: Do not list impl when trait has doc(hidden))
- #86592 (Use `#[non_exhaustive]` where appropriate)
- #86608 (chore(rustdoc): remove unused members of RenderType)
- #86624 (Update compiler-builtins)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Use `#[non_exhaustive]` where appropriate
Due to the std/alloc split, it is not possible to make `alloc::collections::TryReserveError::AllocError` non-exhaustive without having an unstable, doc-hidden method to construct (which negates the benefits from `#[non_exhaustive]`).
`@rustbot` label +C-cleanup +T-libs +S-waiting-on-review
rustc_data_structures has a dependency on crossbeam-utils but never uses
it. It appears to have originally had this dependency in order to set
the "nightly" feature; however, its other dependencies use a different
version of crossbeam-utils, so this doesn't actually affect anything.
Furthermore, in current crossbeam-utils, the "nightly" feature has
become a no-op.
The sha-1 and md-5 packages contain crates named sha1 and md5,
respectively. This discrepancy makes it somewhat more challenging to
automate detection of unused crates. Explicitly rename the packages to
the names of the crates they contain, to simplify such detection.
Don't lint :pat when re-parsing a macro from another crate.
`compile_macro` is used both when compiling the original definition in the crate that defines it, and to compile the macro when loading it when compiling a crate that uses it. We should only emit lints in the first case.
This adds a `is_definition: bool` to pass this information in, so we don't warn about things that only concern the definition site.
Fixes#86567
Even if the content from box is used in a sharef-ref context,
we capture the box entirerly.
This is motivated by:
1) We only capture data that is on the stack.
2) Capturing data from within the box might end up moving more data than
the user anticipated.
Fix use placement for suggestions near main.
This fixes an edge case for the suggestion to add a `use`. When running with `--test`, the `main` function will be annotated with an `#[allow(dead_code)]` attribute. The `UsePlacementFinder` would end up using the dummy span of that synthetic attribute. If there are top-level inner attributes, this would place the `use` in the wrong position. The solution here is to ignore attributes with dummy spans.
In the process of working on this, I discovered that the `use_suggestion_placement` test was broken. `UsePlacementFinder` is unaware of active attributes. Attributes like `#[derive]` don't exist in the AST since they are removed. Fixing that is difficult, since the AST does not retain enough information. I considered trying to place the `use` towards the top of the module after any `extern crate` items, but I couldn't find a way to get a span for the start of a module block (the `mod` span starts at the `mod` keyword, and it seems tricky to find the spot just after the opening bracket and past inner attributes). For now, I just put some comments about the issue. This appears to have been a known issue in #44215 where the test for it was introduced, and the fix seemed to be deferred to later.
Due to the std/alloc split, it is not possible to make
`alloc::collections::TryReserveError::AllocError` non-exhaustive without
having an unstable, doc-hidden method to construct (which negates the
benefits from `#[non_exhaustive]`.
Permit zero non-zero-field on transparent types
Fixes#77841
This makes the transparent fields meet the below:
> * A `repr(transparent)` type `T` must meet the following rules:
> * It may have any number of 1-ZST fields
> * In addition, it may have at most one other field of type U
r? `@nikomatsakis`
Support lowercase error codes in `--explain`
This enables `rustc --explain` to accept a lowercase error code. Thus, for instance, `rustc --explain e0573` would be valid after this change, where before a user would have needed to do `rustc --explain E0573`. Although the upper case form of an error code is canonical, the user may prefer the easier-to-type lowercase form, and there's nothing to be gained by forcing them to type the upper case version.
Resolves#86518.
Error code cleanup and enforce checks
Fixes#86097.
It now checks if an error code is unused, and if so, will report an error if the error code wasn't commented out in the `error_codes.rs` file. It also checks that the constant used in the tidy check is up-to-date.
r? `@Mark-Simulacrum`
Check whether the closure's owner is an ADT in thir-unsafeck
This pull request fixes#85871. The code in `rustc_mir_build/src/check_unsafety.rs` incorrectly assumes that a closure's owner always has a body, but only functions, closures, and constants have bodies, whereas a closure can also appear inside a struct or enum:
```rust
struct S {
arr: [(); match || 1 { _ => 42 }]
}
enum E {
A([(); { || 1; 42 }])
}
```
This pull request fixes the resulting ICE by checking whether the closure's owner is an ADT and only deferring to `thir_check_unsafety(owner)` if it isn't.
Better errors for Debug and Display traits
Currently, if someone tries to pass value that does not implement `Debug` or `Display` to a formatting macro, they get a very verbose and confusing error message. This PR changes the error messages for missing `Debug` and `Display` impls to be less overwhelming in this case, as suggested by #85844. I was a little less aggressive in changing the error message than that issue proposed. Still, this implementation would be enough to reduce the number of messages to be much more manageable.
After this PR, information on the cause of an error involving a `Debug` or `Display` implementation would suppressed if the requirement originated within a standard library macro. My reasoning was that errors originating from within a macro are confusing when they mention details that the programmer can't see, and this is particularly problematic for `Debug` and `Display`, which are most often used via macros. It is possible that either a broader or a narrower criterion would be better. I'm quite open to any feedback.
Fixes#85844.
Rollup of 6 pull requests
Successful merges:
- #86223 (Specify the kind of the item for E0121)
- #86521 (Add comments around code where ordering is important due for panic-safety)
- #86523 (Improvements to intra-doc link macro disambiguators)
- #86542 (Line numbers aligned with content)
- #86549 (Add destructuring example of E0508)
- #86557 (Update books)
Failed merges:
- #86548 (Fix crate filter search reset)
r? `@ghost`
`@rustbot` modify labels: rollup
Re-add support for parsing (and pretty-printing) inner-attributes in match body
Re-add support for parsing (and pretty-printing) inner-attributes within body of a `match`.
In other words, we can do `match EXPR { #![inner_attr] ARM_1 ARM_2 ... }` again.
I believe this unbreaks the only four crates that crater flagged as broken by PR #83312.
(I am putting this up so that the lang-team can check it out and decide whether it changes their mind about what to do regarding PR #83312.)
Fix emit path hashing
With `--emit KIND=PATH`, the PATH should not affect hashes used for dependency tracking. It does not with other ways of specifying output paths (`-o` or `--out-dir`).
Also updates `rustc -Zls` to print more info about crates, which is used here to implement a `run-make` test.
It seems there was already a test explicitly checking that `OutputTypes` hash *is* affected by the path. I think this behaviour is wrong, so I updated the test.
Disambiguate between SourceFiles from different crates even if they have the same path
This PR fixes an ICE that can occur when the compiler encounters a source file that is part of both the local crate and an upstream crate:
1. While importing source files from an upstream crate the compiler creates a `SourceFile` entry for `foo.rs` in the `SourceMap`. Since this is an imported source file its `src` field is `None`.
2. At a later point the parser encounters `foo.rs` again. It tells the `SourceMap` to load the file but because we already have an entry for `foo.rs` the `SourceMap` will return the existing version with `src == None`.
3. The parser proceeds under the assumption that `src.is_some()` and panics when actually trying to use the file's contents.
This PR fixes the issue by adding the source file's associated `CrateNum` to the `SourceMap`'s interning key. As a consequence the two instances of the file will each have a separate entry in the `SourceMap`. They just happen to share the same file path. This approach seemed less problematic to me than trying to mutate the `SourceFile` after it had already been created.
Another, more involved, approach might be to merge the `src` and the `external_src` field.
Fixes#85955
Fix `unused_unsafe` around `await`
Enables `unused_unsafe` lint for `unsafe { future.await }`.
The existing test for this is `unsafe { println!() }`, so I assume that `println!` used to contain compiler-generated unsafe but this is no longer true, and so the existing test is broken. I replaced the test with `unsafe { ...await }`. I believe `await` is currently the only instance of compiler-generated unsafe.
Reverts some parts of #85421, but the issue predates that PR.
Add `future_prelude_collision` lint
Implements #84594. (RFC rust-lang/rfcs#3114 ([rendered](https://github.com/rust-lang/rfcs/blob/master/text/3114-prelude-2021.md))) Not entirely complete but wanted to have my progress decently available while I finish off the last little bits.
Things left to implement:
* [x] UI tests for lints
* [x] Only emit lint for 2015 and 2018 editions
* [ ] Lint name/message bikeshedding
* [x] Implement for `FromIterator` (from best I can tell, the current approach as mentioned from [this comment](https://github.com/rust-lang/rust/issues/84594#issuecomment-847288288) won't work due to `FromIterator` instances not using dot-call syntax, but if I'm correct about this then that would also need to be fixed for `TryFrom`/`TryInto`)*
* [x] Add to `rust-2021-migration` group? (See #85512) (added to `rust-2021-compatibility` group)
* [ ] Link to edition guide in lint docs
*edit: looked into it, `lookup_method` will also not be hit for `TryFrom`/`TryInto` for non-dotcall syntax. If anyone who is more familiar with typecheck knows the equivalent for looking up associated functions, feel free to chime in.
Rollup of 11 pull requests
Successful merges:
- #85054 (Revert SGX inline asm syntax)
- #85182 (Move `available_concurrency` implementation to `sys`)
- #86037 (Add `io::Cursor::{remaining, remaining_slice, is_empty}`)
- #86114 (Reopen#79692 (Format symbols under shared frames))
- #86297 (Allow to pass arguments to rustdoc-gui tool)
- #86334 (Resolve type aliases to the type they point to in intra-doc links)
- #86367 (Fix comment about rustc_inherit_overflow_checks in abs().)
- #86381 (Add regression test for issue #39161)
- #86387 (Remove `#[allow(unused_lifetimes)]` which is now unnecessary)
- #86398 (Add regression test for issue #54685)
- #86493 (Say "this enum variant takes"/"this struct takes" instead of "this function takes")
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Say "this enum variant takes"/"this struct takes" instead of "this function takes"
This makes error messages for functions with incorrect argument counts adapt if they refer to a struct or enum variant:
```
error[E0061]: this enum variant takes 1 argument but 0 arguments were supplied
--> $DIR/struct-enum-wrong-args.rs:7:13
|
LL | let _ = Ok();
| ^^-- supplied 0 arguments
| |
| expected 1 argument
error[E0061]: this struct takes 1 argument but 0 arguments were supplied
--> $DIR/struct-enum-wrong-args.rs:8:13
|
LL | let _ = Wrapper();
| ^^^^^^^-- supplied 0 arguments
| |
| expected 1 argument
```
Fixes#86481.
Add MIR pass to lower call to `core::slice::len` into `Len` operand
During some larger experiment with range analysis I've found that code like `let l = slice.len()` produces different MIR then one found in bound checks. This optimization pass replaces terminators that are calls to `core::slice::len` with just a MIR operand and Goto terminator.
It uses some heuristics to remove the outer borrow that is made to call `core::slice::len`, but I assume it can be eliminated, just didn't find how.
Would like to express my gratitude to `@oli-obk` who helped me a lot on Zullip
Emit warnings for unused fields in custom targets.
Add a warning which lists any fields in a custom target `json` file that aren't used. Currently unrecognized fields are ignored so, for example, a typo in the `json` will silently produce a target which isn't the one intended.
Do not emit alloca for ZST locals with multiple assignments
This extends 35566bfd7d to additionally stop emitting unnecessary allocas for zero sized locals that are assigned multiple times.
When rebuilding the standard library with `-Zbuild-std` this reduces the number of locals that require an allocation from 62315 to 61767.
Replace some `std::iter::repeat` with `str::repeat`
I noticed that there were some instances where `std::iter::repeat` would be used to repeat a string or a char to take a specific count of it and then collect it into a `String` when `str::repeat` is actually much faster and better for that.
See also: https://github.com/rust-lang/rust-clippy/issues/7260.
Add pattern walking support to THIR walker
Suggested in https://github.com/rust-lang/rust/pull/85263#issuecomment-861906730, this splits off the support for pattern walking in THIR from #85263. This has no observable effect on THIR unsafety checking, since it is not currently possible to trigger unsafety from the THIR checker using the additional patterns or constants that are now walked. THIR patterns are walked in source code order.
r? `@LeSeulArtichaut`
Fix ICE with `#[repr(simd)]` on enum
This pull request fixes#83505. `#[repr(simd)]` may only be applied to structs, which correctly causes `E0517` for the example given in #83505, but the compiler attempts to recover from this error, which leads to an ICE later, when `.non_enum_variant()` is called on the `AdtDef`. I have added a check that prevents this from happening.
make UB during CTFE a hard error
This is a next step for https://github.com/rust-lang/rust/issues/71800. `const_err` has been a future-incompatibility lint for 4 months now since https://github.com/rust-lang/rust/pull/80394 (and err-by-default for many years before that), so I think we could try making it a proper hard error at least in some situations.
I didn't yet adjust the tests, since I first want to gauge the fall-out via crater.
Cc `@rust-lang/wg-const-eval`
Remove some last remants of {push,pop}_unsafe!
These macros have already been removed, but there was still some code handling these macros. That code is now removed.
Provide option for specifying the profiler runtime
Currently, if `-Zinstrument-coverage` is enabled, the target is linked
against the `library/profiler_builtins` crate (which pulls in LLVM's
compiler-rt runtime).
This option enables backends to specify an alternative runtime crate for
handling injected instrumentation calls.
Use `AttrVec` for `Arm`, `FieldDef`, and `Variant`
Uses `AttrVec` for `Arm`, `FieldDef`, and `Variant`, i.e., where the size of the vector can be empty often.
Skips `Crate` and `Item` because I think they may have the attributes on common cases and need more work outside of `rustc_ast` (e.g. rustc_expand needs a lot of tweaks). But if it's reasonable to change, I'm happy to do so.
Fixes#77662
Fix ICE when using `#[doc(keyword = "...")]` on non-items
This pull request fixes#83512. The code for checking attributes calls `expect_item()` when it shouldn't, thus causing an ICE. I have implemented a proper check for the node kind, so that an error is reported instead of the ICE.
Make `s` pre-interned
Now we should be able to pre-intern `s` as the test `ui/lint/rfc-2457-non-ascii-idents/lint-confusable-idents.rs` no longer fails.
Prefer `partition_point` to look up assoc items
Since we now have `partition_point` (instead of `equal_range`), I think it's worth trying to use it instead of manually finding it.
`partition_point` uses `binary_search_by` internally (#85406) and its performance has been improved (#74024), so I guess this will make a performance difference.
Use better error message for hard errors in CTFE
I noticed this while working on #86255: currently the same message is used for hard errors and soft errors in CTFE. This changes the error messages to make hard errors use a message that indicates the reality of the situation correctly, since usage of the constant is never allowed when there was a hard error evaluating it. This doesn't affect the behaviour of these error messages, only the content.
This changes the error logic to check if the error should be hard or soft where it is generated, instead of where it is emitted, to allow this distinction in error messages.
Replace parent substs of associated types with inference vars in borrow checker
Fixes https://github.com/rust-lang/rust/issues/83190
Fixes https://github.com/rust-lang/rust/issues/78450
When we normalize an associated type that refers to an opaque type, it can happen that the substs of the associated type do not occur in the projection (they are parent substs). We previously didn't replace those substs with inference vars, which left a concrete region after all regions should have already been replaced with inference vars and triggered a `delay_span_bug`. After we normalize the opaque type, we now try to replace any remaining concrete regions with inference vars.
Handle C-variadic arguments properly when reporting region errors
This pull request fixes#86053. The issue is that for a C-variadic function
```rust
#![feature(c_variadic)]
unsafe extern "C" fn foo(_: (), ...) {}
```
`foo`'s signature will contain only the first parameter (and have `c_variadic` set to `true`), whereas its body has a second argument (a `hir::Pat` for the `...`).
The code for reporting region errors iterates over the body's parameters and tries to fetch the corresponding parameter from the signature; this causes an out-of-bounds ICE for the `...` (though not in the example above, because there are no region errors to report).
I have simply restricted the iteration over the body parameters to exclude `...`, which is fine because `...` cannot cause a region error.
Stop returning a value from `report_assert_as_lint`
This function only ever returns `None`. Make that explicity by not returning a value at all.
`@rustbot` modify labels +C-cleanup +T-compiler
Fix span calculation in format strings
This pull request fixes#86085. The ICE described there is due to an error in the span calculation inside format strings, if the format string is the result of a macro invocation:
```rust
fn main() {
format!(concat!("abc}"));
}
```
currently produces:
```
error: invalid format string: unmatched `}` found
--> test.rs:2:17
|
2 | format!(concat!("abc}"));
| ^ unmatched `}` in format string
```
which is obviously incorrect. This happens because the span of the entire `concat!()` is combined with the _relative_ location of the unmatched `` `}` `` in the _result_ of the macro invocation (i.e. 4).
In #86085, this has led to a span that starts or ends in the middle of a multibyte character, but the root cause was the same. This pull request fixes the problem.
Box `thir::ExprKind::Adt` for performance
`Adt` is the biggest variant in the enum and probably isn't used very often compared to the other expr kinds, so boxing it should be beneficial for performance. We need a perf test to be sure.
Refactor vtable codegen
This refactor the codegen of vtables of miri interpreter, llvm, cranelift codegen backends.
This is preparation for the implementation of trait upcasting feature. cc #65991
Note that aside from code reorganization, there's an internal behavior change here that now InstanceDef::Virtual's index now include the three metadata slots, and now the first method is with index 3.
cc `@RalfJung` `@bjorn3`
Currently the same message is used for hard errors and soft errors. This
makes hard errors use a message that indicates the reality of the
situation correctly, since usage of the constant is never allowed when
there was a hard error evaluating it.
Improve CTFE UB validation error messages
As mentioned in https://github.com/rust-lang/rust/pull/86245#discussion_r650494012 this PR slightly improves the formatting of validation errors, to move the path to the error prefix.
From:
`type validation failed: encountered invalid vtable: size is bigger than largest supported object at .0`
To:
`type validation failed at .0: encountered invalid vtable: size is bigger than largest supported object`.
Fix force-warns to allow dashes.
The `--force-warns` flag was not allowing lint names with dashes, only supporting underscores. This changes it to allow dashes to match the behavior of the A/W/D/F flags.
Fix ICEs on invalid vtable size/alignment const UB errors
The invalid vtable size/alignment errors from `InterpCx::read_size_and_align_from_vtable` were "freeform const UB errors", causing ICEs when reaching validation. This PR turns them into const UB hard errors to catch them during validation and avoid that.
Fixes#86193
r? `@RalfJung`
(It seemed cleaner to have 2 variants but they can be merged into one variant with a message payload if you prefer that ?)
Do not suggest to add type annotations for unnameable types
Consider this example:
```rust
const A = || 42;
struct S<T> { t: T }
const B: _ = S { t: || 42 };
```
This currently produces the following output:
```
error: missing type for `const` item
--> src/lib.rs:1:7
|
1 | const A = || 42;
| ^ help: provide a type for the item: `A: [closure@src/lib.rs:1:11: 1:16]`
error[E0121]: the type placeholder `_` is not allowed within types on item signatures
--> src/lib.rs:4:10
|
4 | const B: _ = S { t: || 42 };
| ^
| |
| not allowed in type signatures
| help: replace `_` with the correct type: `S<[closure@src/lib.rs:4:21: 4:26]>`
error: aborting due to 2 previous errors
```
However, these suggestions are obviously useless, because the suggested types cannot be written down. With my changes, the suggestion is replaced with a note, because there is no simple fix:
```
error: missing type for `const` item
--> test.rs:1:7
|
1 | const A = || 42;
| ^
|
note: however, the inferred type `[closure@test.rs:1:11: 1:16]` cannot be named
--> test.rs:1:11
|
1 | const A = || 42;
| ^^^^^
error[E0121]: the type placeholder `_` is not allowed within types on item signatures
--> test.rs:4:10
|
4 | const B: _ = S { t: || 42 };
| ^ not allowed in type signatures
|
note: however, the inferred type `S<[closure@test.rs:4:21: 4:26]>` cannot be named
--> test.rs:4:14
|
4 | const B: _ = S { t: || 42 };
| ^^^^^^^^^^^^^^
error: aborting due to 2 previous errors
```
Hash DefId in rustc_span.
This is mostly just moving code around. Changes are simplifications of unneeded callbacks from rustc_span to rustc_middle.
r? `@petrochenkov`
Make `relate_type_and_mut` public
#85343 improved diagnostics around `Relate` impls but made `relate_type_and_mut` private, which was accessible as `relate` previously. This makes it public so that we can use it on rust-semverver.
r? ```@Aaron1011```
Detect incorrect vtable alignment during const eval
This PR fixes#86132 by detecting invalid alignment values for trait objects in the interpreter, and emitting an error about this conversion failure, to avoid the ICE.
I've noticed that the error emitted at a50d72158e/compiler/rustc_mir/src/interpret/traits.rs (L163-L166) doesn't seem to be present in the const-ub tests, so I've tried adding a test that triggers both of these cases: one for the invalid size, and another for the invalid alignment that #86132 tracks (I have found different magic values triggering different `Align::from_bytes` errors than the "power of 2" one, if need be).
However, when doing that, I *cannot* for the life of me figure out the correct incantation to make these 2 errors trigger with the "it is undefined behavior to use this value" message rather than the "any use of this value will cause an error" lint.
I've tried Oli's suggestions of different values, tuples and arrays, using the transparent wrapper trick from the other tests and I was only able to trigger the regular const-ub errors about the size of the vtable, or that the drop pointer was invalid. Maybe these "type validation failed" errors happen before this part of the interpreter is reached and there just needs some magic incorrect values to bypass them, I don't know.
Since this fixes an ICE, and if the constants are indeed used, these 2 tests will turn into a hard error, I thought I'd open the PR anyways. And if ```@RalfJung``` you know of a way I could manage that (if you think that these tests are worth checking that the `throw_ub_format!` does indeed create const-ub errors as we expect) I'd be grateful.
For that reason, r? ```@RalfJung``` and cc ```@oli-obk.```
Do not suggest ampmut if rhs is already mutable
Removes invalid suggestion in #85765, although it should highlight the user type instead of the local variable.
Looking at the comments of this line:
84b1005bfd/compiler/rustc_mir_build/src/build/matches/mod.rs (L2107)
It was intentionally set to `None`, causing it to highlight the local variable instead. I am not sure if I will be able to fix it.
Fixes#85765
Fix some diagnostic issues with const_generics_defaults feature gate
This PR makes a few changes:
- print out const param defaults in "lifetime ordering" errors rather than discarding them
- update `is_simple_text` to account for const params when checking if a type has no generics, this was causing a note to be failed to add to an error message
- fixes some diagnostic wording that incorrectly said there was ordering restrictions between type/const params despite the `const_generics_defaults` feature gate is active
Don't use a generator for BoxedResolver
The generator is non-trivial and requires unsafe code anyway. Using regular unsafe code without a generator is much easier to follow.
Based on #85810 as it touches rustc_interface too.
Suggest a trailing comma if a 1-tuple is expected and a parenthesized expression is found
This pull request fixes#86100. The following code:
```rust
fn main() {
let t: (i32,) = (1);
}
```
currently produces:
```
warning: unnecessary parentheses around assigned value
--> test.rs:2:21
|
2 | let t: (i32,) = (1);
| ^^^ help: remove these parentheses
|
= note: `#[warn(unused_parens)]` on by default
error[E0308]: mismatched types
--> test.rs:2:21
|
2 | let t: (i32,) = (1);
| ------ ^^^ expected tuple, found integer
| |
| expected due to this
|
= note: expected tuple `(i32,)`
found type `{integer}`
error: aborting due to previous error; 1 warning emitted
```
With my changes, I get the same warning and the following error:
```
error[E0308]: mismatched types
--> test.rs:2:21
|
2 | let t: (i32,) = (1);
| ------ ^^^ expected tuple, found integer
| |
| expected due to this
|
= note: expected tuple `(i32,)`
found type `{integer}`
help: use a trailing comma to create a tuple with one element
|
2 | let t: (i32,) = (1,);
| ^^^^
```
i.e. I have added a suggestion to add a trailing comma to create a 1-tuple. This suggestion is only issued if a 1-tuple is expected and the expression (`(1)` in the example above) is surrounded by parentheses and does not already have a tuple type. In this situation, I'd say that it is pretty likely that the user meant to create a tuple.
std: Stabilize wasm simd intrinsics
This commit performs two changes to stabilize Rust support for
WebAssembly simd intrinsics:
* The stdarch submodule is updated to pull in rust-lang/stdarch#1179.
* The `wasm_target_feature` feature gate requirement for the `simd128`
feature has been removed, stabilizing the name `simd128`.
This should conclude the FCP started on #74372 and...
Closes#74372
This commit performs two changes to stabilize Rust support for
WebAssembly simd intrinsics:
* The stdarch submodule is updated to pull in rust-lang/stdarch#1179.
* The `wasm_target_feature` feature gate requirement for the `simd128`
feature has been removed, stabilizing the name `simd128`.
This should conclude the FCP started on #74372 and...
Closes#74372
MVP for using rust-lld as part of cc
Will fix#71519. I need to figure out how to write a test showing that lld is used instead of whatever linker cc normally uses. When I manually run rustc using `echo 'fn main() {}' | RUSTC_LOG=rustc_codegen_ssa:🔙:link=debug ./rustc -Clinker-flavor=gcc-lld --crate-type bin -Clink-arg=-Wl,-v` (thanks to bjorn3 on Zulip), I can see that lld is used, but I'm not sure how to inspect that output in a test.
Disable the machine outliner by default
This addresses a codegen-issue that needs to be fixed upstream in LLVM.
While we wait for the fix, we can disable it.
Verified manually that the outliner is no longer run when
`-Copt-level=z` is specified, and also that you can override this with
`-Cllvm-args=-enable-machine-outliner` if you need it anyway.
A regression test is not really feasible in this instance, given that we
do not have any minimal reproducers.
Fixes#85351
cc `@pnkfelix`
Use preorder traversal when checking for SSA locals
Traverse blocks in topological sort of dominance partial order, to ensure that
local analyzer correctly identifies locals that are already in static single
assignment form, while avoiding dependency on implicit numeric order of blocks.
When rebuilding the standard library, this change reduces the number of locals
that require an alloca from 62452 to 62348.
ignore test if rust-lld not found
create ld -> rust-lld symlink at build time instead of run time
for testing in ci
copy instead of symlinking
remove linux check
test for linker, suggestions from bjorn3
fix overly restrictive lld matcher
use -Zgcc-ld flag instead of -Clinker-flavor
refactor code adding lld to gcc path
revert ci changes
suggestions from petrochenkov
rename gcc_ld to gcc-ld in dirs
Rollup of 7 pull requests
Successful merges:
- #82037 (Make symbols stripping work on MacOS X)
- #84687 (Multiple improvements to RwLocks)
- #85997 (rustdoc: Print a warning if the diff when comparing to old nightlies is empty)
- #86051 (Updated code examples and wording in move keyword documentation )
- #86111 (fix off by one in `std::iter::Iterator` documentation)
- #86113 (build doctests with lld if use-lld = true)
- #86175 (update Miri)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
As reported in the stabilization issue, MacOS' linker doesn't support the `-s` and `-S` flags to strip symbols anymore. However, the os ships a separated tool to perform these operations.
This change allows the compiler to use that tool after a target has been compiled to strip symbols.
For rationale, see: https://github.com/rust-lang/rust/issues/72110#issuecomment-641169818
For option selection, see: https://www.unix.com/man-page/osx/1/strip/
Signed-off-by: David Calavera <david.calavera@gmail.com>
Peephole optimize `x == false` and `x != true`
This adds peephole optimizations to make `x == false`, `false == x`, `x != true`, and `true != x` get optimized to `!x` in the `instcombine` MIR pass. That pass currently handles `x == true` -> `x` already.
Include macro name in 'local ambiguity' error
Currently, we only point at the span of the macro argument. When the
macro call is itself generated by another macro, this can make it
difficult or impossible to determine which macro is responsible for
producing the error.
Enable rustdoc to document safe wasm intrinsics
This commit fixes an issue not found during #84988 where rustdoc is used
to document cross-platform intrinsics but it was requiring that
functions which use `#[target_feature]` are `unsafe` erroneously, even
if they're WebAssembly specific. Rustdoc today, for example, already has
a special case where it enables annotations like
`#[target_feature(enable = "simd128")]` on platforms other than
WebAssembly. The purpose of this commit is to relax the "require all
`#[target_feature]` functions are `unsafe`" requirement for all targets
whenever rustdoc is running, enabling all targets to fully document
other targets, such as WebAssembly, where intrinsics functions aren't
always `unsafe`.
Comment out unused error codes and add description for E0316
I have added an extended description of `E0316` and commented out a bunch of unused error codes to make clear the fact that they are no longer in use. You can check for yourself with
```shell
for ec in \
E0314 E0315 E0473 E0474 E0475 E0479 E0480 E0481 \
E0483 E0484 E0485 E0486 E0487 E0488 E0489
do
if [ ! -z "`grep -r $ec compiler/* --exclude-dir=rustc_error_codes`" ]
then
echo $ec
false
fi
done
```
i.e. these error codes appear nowhere in the compiler code and thus cannot be emitted.
r? ```@GuillaumeGomez```
Currently, we only point at the span of the macro argument. When the
macro call is itself generated by another macro, this can make it
difficult or impossible to determine which macro is responsible for
producing the error.
This commit fixes an issue not found during #84988 where rustdoc is used
to document cross-platform intrinsics but it was requiring that
functions which use `#[target_feature]` are `unsafe` erroneously, even
if they're WebAssembly specific. Rustdoc today, for example, already has
a special case where it enables annotations like
`#[target_feature(enable = "simd128")]` on platforms other than
WebAssembly. The purpose of this commit is to relax the "require all
`#[target_feature]` functions are `unsafe`" requirement for all targets
whenever rustdoc is running, enabling all targets to fully document
other targets, such as WebAssembly, where intrinsics functions aren't
always `unsafe`.
Remove the install prefix from the rpath set when using -Crpath
It was broken anyway for rustup installs and nobody seems to have noticed.
Fixes https://github.com/rust-lang/rust/issues/82392
Unify duplicate linker_and_flavor methods in rustc_codegen_{cranelift,ssa}.
The two methods were exactly the same so this removes the cranelift copy. This will help make sure both they don't get out of sync.
Fix ICE during type layout when there's a `[type error]`
Fixes#84108.
Based on estebank's [comment], except I used `delay_span_bug` because it
should work in more cases, and I think it expresses its intent more
clearly.
r? `@estebank`
[comment]: https://github.com/rust-lang/rust/issues/84108#issuecomment-818916848
Driver improvements
This PR contains a couple of cleanups for the driver and a few small improvements for the custom codegen backend interface. It also implements `--version` and `-Cpasses=list` support for custom codegen backends.
Fix corrected example in E0759.md
This pull request fixes#86061, which was probably caused by a copy-paste error, where the supposedly corrected code example was also marked with `compile_fail`. Thus, the fact that the "correct" example actually _isn't_ correct was not caught by the doc-tests. This pull request removes the incorrect `compile_fail` annotation and fixes the example.
r? ``@GuillaumeGomez``
Fix two ICEs in the parser
This pull request fixes#84104 and fixes#84148. The latter is caused by an invalid `assert_ne!()` in the parser, which I have simply removed because the error is then caught in another part of the parser.
#84104 is somewhat more subtle and has to do with a suggestion to remove extraneous `<` characters; for instance:
```rust
fn main() {
foo::<Ty<<<i32>();
}
```
currently leads to
```
error: unmatched angle brackets
--> unmatched-langle.rs:2:10
|
2 | foo::<Ty<<<i32>();
| ^^^ help: remove extra angle brackets
```
which is obviously wrong and stems from the fact that the code for issuing the above suggestion does not consider the possibility that there might be other tokens in between the opening angle brackets. In #84104, this has led to a span being generated that ends in the middle of a multi-byte character (because the code issuing the suggestion thought that it was only skipping over `<`, which are single-byte), causing an ICE.
Add variance-related information to lifetime error messages
This PR adds a basic framework for displaying variance-related information in error messages. For example:
```
error: lifetime may not live long enough
--> $DIR/type-check-pointer-comparisons.rs:12:5
|
LL | fn compare_mut<'a, 'b>(x: *mut &'a i32, y: *mut &'b i32) {
| -- -- lifetime `'b` defined here
| |
| lifetime `'a` defined here
LL | x == y;
| ^ requires that `'a` must outlive `'b`
|
= help: consider adding the following bound: `'a: 'b`
= note: requirement occurs because of a mutable pointer to &i32
= note: mutable pointers are invariant over their type parameter
= help: see <https://doc.rust-lang.org/nomicon/subtyping.html> for more information about variance
```
The last three lines are new.
This is accomplished by adding a new struct `VarianceDiagInfo`, and passing it along through the various relation methods. When relating types that change the variance (e.g. `&mut T` or `*mut T`), we pass a more specific `VarianceDiagInfo` storing information about the cause of the variance change. When an error, we use the `VarianceDiagInfo` to add additional information to the error message.
This PR doesn't change any variance-related computation or behavior - only diagnostic messages. Therefore, the implementation is quite incomplete - more detailed error messages can be filled in in subsequent PRs.
Limitations:
* We only attempt to deal with invariance - since it's at the bottom of the 'variance lattice', our variance will never change again after it becomes invariant. Handling contravariance would be trickier, since we can change between contravariance and covariance multiple times (e.g. `fn(fn(&'static u8))`). Since contravariance (AFAIK) is only used for function arguments, we can probably get away without a very fancy message for cases involving contravariance.
* `VarianceDiagInfo` currently only handles mutable pointers/references. However, user-defined types (structs, enums, and unions) have the variance of their type parameters inferred, so it would be good to eventually display information about that. We'll want to try to find a balance between displaying too much and too little information about how the variance was inferred.
* The improved error messages are only displayed when `#![feature(nll)]` / `-Z borrowck=mir` is enabled. If issue https://github.com/rust-lang/rust/issues/58781 is not resolved relatively soon, then we might want to duplicate some of this logic in the 'current' (non-NLL) region/outlives handling code.
linker: Reorder linker arguments
- Split arguments into order-independent and order-dependent, to define more precisely what (pre-,post-,late-,)link-args mean.
- Add some comments.
- Combine all native library arguments together, to simplify potential support for library deduplication and similar things
- Split arguments into order-independent and order-dependent, to define more precisely what (pre,post,late)-link-args mean
parser: Ensure that all nonterminals have tokens after parsing
`parse_nonterminal` should always result in something with tokens.
This requirement wasn't satisfied in two cases:
- `stmt` nonterminal with expression statements (e.g. `0`, or `{}`, or `path + 1`) because `fn parse_stmt_without_recovery` forgot to propagate `force_collect` in some cases.
- `expr` nonterminal with expressions with built-in attributes (e.g. `#[allow(warnings)] 0`) due to an incorrect optimization in `fn parse_expr_force_collect`, it assumed that all expressions starting with `#` have their tokens collected during parsing, but that's not true if all the attributes on that expression are built-in and inert.
(Discovered when trying to implement eager `cfg` expansion for all attributes https://github.com/rust-lang/rust/pull/83824#issuecomment-817317170.)
r? `@Aaron1011`
Drop an `if let` that will always succeed
We've already checked that `proj_base == []` in the line above and renaming
`place_local` to `local` doesn't gain us anything.
``@rustbot`` modify labels +C-cleanup +T-compiler
Tweak wasm_base target spec to indicate linker is not GNU and update linker inferring logic for wasm-ld.
Reported via [Zulip](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/wasi.20linker.20unknown.20argument.3A.20--as-needed): we try passing `--as-needed` to the linker if it's GNU ld which `wasm-ld` is not. Usually this isn't an issue for wasm as we would use the WasmLd linker driver but because the linker in question (`wasm32-unknown-wasi-wasm-ld`) ended with `-ld` our linker inferring [logic](f64503eb55/compiler/rustc_codegen_ssa/src/back/link.rs (L957-L1040)) used the `GccLinker` implementations. (UPD: The linker inferring logic actually didn't apply in this case because the linker is actually invoked through gcc in the reported issue. But it's still worth updating the logic I think.)
This change then has 2 parts:
1. Update wasm_base target spec to indicate `linker_is_gnu: false` plus a few additions of `target.is_like_wasm` to handle flags `wasm-ld` does in fact support.
2. Improve the linker detection logic to properly determine the correct flavor of wasm linker we're using when we can.
We need to add the new `target.is_like_wasm` branches to handle the case where the "linker" used could be something like clang which would then under the hood call wasm-ld.
Preserve metadata w/ Solaris-like linkers.
#84468 moved the `-zignore` linker flag from the `gc_sections` method to `add_as_needed` which is more accurate but Solaris-style linkers will also end up removing an unreferenced ELF sections [1]. This had the unfortunate side effect of causing the `.rustc` section (which has the metada) to be removed which could cause issues when trying to link against the resulting crates or use proc macros.
Since the `-zignore` is positional, we fix this by moving the metadata objects to before the flag.
[1] Specifically a section is considered unreferenced if:
* The section is allocatable
* No other sections bind to (relocate) to this section
* The section provides no global symbols
https://docs.oracle.com/cd/E19683-01/817-3677/6mj8mbtbs/index.html#chapter4-19
Show test type during prints
Test output can sometimes be confusing. For example doctest with the no_run argument are displayed the same way than test that are run.
During #83857 I got the feedback that test output can be confusing.
For the moment test output is
```
test $DIR/test-type.rs - f (line 12) ... ignored
test $DIR/test-type.rs - f (line 15) ... ok
test $DIR/test-type.rs - f (line 21) ... ok
test $DIR/test-type.rs - f (line 6) ... ok
```
I propose to change output by indicating the test type as
```
test $DIR/test-type.rs - f (line 12) ... ignored
test $DIR/test-type.rs - f (line 15) - compile ... ok
test $DIR/test-type.rs - f (line 21) - compile fail ... ok
test $DIR/test-type.rs - f (line 6) ... ok
```
by indicating the test type after the test name (and in the case of doctest after the function name and line) and before the "...".
------------
Note: this is a proof of concept, the implementation is probably not optimal as the properties added in `TestDesc` are only use in the display and does not represent actual change of behavior, maybe `TestType::DocTest` could have fields
Partial support for raw-dylib linkage
First cut of functionality for issue #58713: add support for `#[link(kind = "raw-dylib")]` on `extern` blocks in lib crates compiled to .rlib files. Does not yet support `#[link_name]` attributes on functions, or the `#[link_ordinal]` attribute, or `#[link(kind = "raw-dylib")]` on `extern` blocks in bin crates; I intend to publish subsequent PRs to fill those gaps. It's also not yet clear whether this works for functions in `extern "stdcall"` blocks; I also intend to investigate that shortly and make any necessary changes as a follow-on PR.
This implementation calls out to an LLVM function to construct the actual `.idata` sections as temporary `.lib` files on disk and then links those into the generated .rlib.
BPF target support
This adds `bpfel-unknown-none` and `bpfeb-unknown-none`, two new no_std targets that generate little and big endian BPF. The approach taken is very similar to the cuda target, where `TargetOptions::obj_is_bitcode` is enabled and code generation is done by the linker.
I added the targets to `dist-various-2`. There are [some tests](https://github.com/alessandrod/bpf-linker/tree/main/tests/assembly) in bpf-linker and I'm planning to add more. Those are currently not ran as part of rust CI.
Remove special handling of `box_free` from `LocalAnalyzer`
The special casing of `box_free` predates the use of dominators in
analyzer. It is no longer necessary now that analyzer verifies that
the first assignment dominates all uses.
This addresses a codegen-issue that needs to be fixed upstream in LLVM.
While we wait for the fix, we can disable it.
Verified manually that the outliner is no longer run when
`-Copt-level=z` is specified, and also that you can override this with
`-Cllvm-args=-enable-machine-outliner` if you need it anyway.
A regression test is not really feasible in this instance, given that we
do not have any minimal reproducers.
Fixes#85351
Allow raw pointers in SIMD types
Closes#85915 by loosening the strictness in typechecking and adding a test to guarantee it passes.
This still might be too strict, as references currently do pass monomorphization, but my understanding is that they are not guaranteed to be "scalar" in the same way.
Remove `doc(include)`
This nightly feature is redundant now that `extended_key_value_attributes` is stable (https://github.com/rust-lang/rust/pull/83366). `@rust-lang/rustdoc` not sure if you think this needs FCP; there was already an FCP in #82539, but technically it was for deprecating, not removing the feature altogether.
This should not be merged before #83366.
cc `@petrochenkov`
Implement DepTrackingHash for `Option` through blanket impls instead of macros
This avoids having to add a new macro call for both the `Option` and the type itself.
Noticed this while working on https://github.com/rust-lang/rust/pull/84233.
r? `@Aaron1011`
This does not yet support #[link_name] attributes on functions, the #[link_ordinal]
attribute, #[link(kind = "raw-dylib")] on extern blocks in bin crates, or
stdcall functions on 32-bit x86.
don't suggest unsized indirection in where-clauses
Skip where-clauses when suggesting using indirection in combination with
`?Sized` bounds on type parameters.
Fixes#85943.
`@estebank` I think this doesn't conflict with your work in #85947; please let me know if you'd like me to cherry pick it to a new branch based on yours instead.
wasm: Make simd types passed via indirection again
This commit updates wasm target specs to use `simd_types_indirect: true`
again. Long ago this was added since wasm simd types were always
translated to `v128` under-the-hood in LLVM, meaning that it didn't
matter whether that target feature was enabled or not. Now, however,
`v128` is conditionally used in codegen depending on target features
enabled, meaning that it's possible to get linker errors about different
signatures in code that correctly uses simd types. The fix is the same
as for all other platforms, which is to pass the type indirectly.
rustc: Store metadata-in-rlibs in object files
This commit updates how rustc compiler metadata is stored in rlibs.
Previously metadata was stored as a raw file that has the same format as
`--emit metadata`. After this commit, however, the metadata is encoded
into a small object file which has one section which is the contents of
the metadata.
The motivation for this commit is to fix a common case where #83730
arises. The problem is that when rustc crates a `dylib` crate type it
needs to include entire rlib files into the dylib, so it passes
`--whole-archive` (or the equivalent) to the linker. The problem with
this, though, is that the linker will attempt to read all files in the
archive. If the metadata file were left as-is (today) then the linker
would generate an error saying it can't read the file. The previous
solution was to alter the rlib just before linking, creating a new
archive in a temporary directory which has the metadata file removed.
This problem from before this commit is now removed if the metadata file
is stored in an object file that the linker can read. The only caveat we
have to take care of is to ensure that the linker never actually
includes the contents of the object file into the final output. We apply
similar tricks as the `.llvmbc` bytecode sections to do this.
This involved changing the metadata loading code a bit, namely updating
some of the LLVM C APIs used to use non-deprecated ones and fiddling
with the lifetimes a bit to get everything to work out. Otherwise though
this isn't intended to be a functional change really, only that metadata
is stored differently in archives now.
This should end up fixing #83730 because by default dylibs will no
longer have their rlib dependencies "altered" meaning that
split-debuginfo will continue to have valid paths pointing at the
original rlibs. (note that we still "alter" rlibs if LTO is enabled to
remove Rust object files and we also "alter" for the #[link(cfg)]
feature, but that's rarely used).
Closes#83730
