Take MIR dataflow analyses by mutable reference
The main motivation here is any analysis requiring dynamically sized scratch memory to work. One concrete example would be pointer target tracking, where tracking the results of a dereference can result in multiple possible targets. This leads to processing multi-level dereferences requiring the ability to handle a changing number of potential targets per step. A (simplified) function for this would be `fn apply_deref(potential_targets: &mut Vec<Target>)` which would use the scratch space contained in the analysis to send arguments and receive the results.
The alternative to this would be to wrap everything in a `RefCell`, which is what `MaybeRequiresStorage` currently does. This comes with a small perf cost and loses the compiler's guarantee that we don't try to take multiple borrows at the same time.
For the implementation:
* `AnalysisResults` is an unfortunate requirement to avoid an unconstrained type parameter error.
* `CloneAnalysis` could just be `Clone` instead, but that would result in more work than is required to have multiple cursors over the same result set.
* `ResultsVisitor` now takes the results type on in each function as there's no other way to have access to the analysis without cloning it. This could use an associated type rather than a type parameter, but the current approach makes it easier to not care about the type when it's not necessary.
* `MaybeRequiresStorage` now no longer uses a `RefCell`, but the graphviz formatter now does. It could be removed, but that would require even more changes and doesn't really seem necessary.
Optimize dataflow-const-prop place-tracking infra
Optimization opportunities found while investigating https://github.com/rust-lang/rust/pull/110719
Computing places breadth-first ensures that we create short projections before deep projections, since the former are more likely to be propagated.
The most relevant is the pre-computation of flooded places. Callgrind showed `flood_*` methods and especially `preorder_preinvoke` were especially hot. This PR attempts to pre-compute the set of `ValueIndex` that `preorder_invoke` would visit.
Using this information, we make some `PlaceIndex` inaccessible when they contain no `ValueIndex`, allowing to skip computations for those places.
cc `@jachris` as original author
Add `rustc_fluent_macro` to decouple fluent from `rustc_macros`
Fluent, with all the icu4x it brings in, takes quite some time to compile. `fluent_messages!` is only needed in further downstream rustc crates, but is blocking more upstream crates like `rustc_index`. By splitting it out, we allow `rustc_macros` to be compiled earlier, which speeds up `x check compiler` by about 5 seconds (and even more after the needless dependency on `serde_json` is removed from `rustc_data_structures`).
Fluent, with all the icu4x it brings in, takes quite some time to
compile. `fluent_messages!` is only needed in further downstream rustc
crates, but is blocking more upstream crates like `rustc_index`. By
splitting it out, we allow `rustc_macros` to be compiled earlier, which
speeds up `x check compiler` by about 5 seconds (and even more after the
needless dependency on `serde_json` is removed from
`rustc_data_structures`).
Unify terminology used in unwind action and terminator, and reflect
the fact that a nounwind panic is triggered instead of an immediate
abort is triggered for this terminator.
Drop array patterns using subslices
Fixes#109004
Drops contiguous subslices of an array when moving elements out with a pattern, which improves perf for large arrays
r? `@compiler-errors`
Update `ty::VariantDef` to use `IndexVec<FieldIdx, FieldDef>`
And while doing the updates for that, also uses `FieldIdx` in `ProjectionKind::Field` and `TypeckResults::field_indices`.
There's more places that could use it (like `rustc_const_eval` and `LayoutS`), but I tried to keep this PR from exploding to *even more* places.
Part 2/? of https://github.com/rust-lang/compiler-team/issues/606
And while doing the updates for that, also uses `FieldIdx` in `ProjectionKind::Field` and `TypeckResults::field_indices`.
There's more places that could use it (like `rustc_const_eval` and `LayoutS`), but I tried to keep this PR from exploding to *even more* places.
Part 2/? of https://github.com/rust-lang/compiler-team/issues/606
Partial stabilization of `once_cell`
This PR aims to stabilize a portion of the `once_cell` feature:
- `core::cell::OnceCell`
- `std::cell::OnceCell` (re-export of the above)
- `std::sync::OnceLock`
This will leave `LazyCell` and `LazyLock` unstabilized, which have been moved to the `lazy_cell` feature flag.
Tracking issue: https://github.com/rust-lang/rust/issues/74465 (does not fully close, but it may make sense to move to a new issue)
Future steps for separate PRs:
- ~~Add `#[inline]` to many methods~~ #105651
- Update cranelift usage of the `once_cell` crate
- Update rust-analyzer usage of the `once_cell` crate
- Update error messages discussing once_cell
## To be stabilized API summary
```rust
// core::cell (in core/cell/once.rs)
pub struct OnceCell<T> { .. }
impl<T> OnceCell<T> {
pub const fn new() -> OnceCell<T>;
pub fn get(&self) -> Option<&T>;
pub fn get_mut(&mut self) -> Option<&mut T>;
pub fn set(&self, value: T) -> Result<(), T>;
pub fn get_or_init<F>(&self, f: F) -> &T where F: FnOnce() -> T;
pub fn into_inner(self) -> Option<T>;
pub fn take(&mut self) -> Option<T>;
}
impl<T: Clone> Clone for OnceCell<T>;
impl<T: Debug> Debug for OnceCell<T>
impl<T> Default for OnceCell<T>;
impl<T> From<T> for OnceCell<T>;
impl<T: PartialEq> PartialEq for OnceCell<T>;
impl<T: Eq> Eq for OnceCell<T>;
```
```rust
// std::sync (in std/sync/once_lock.rs)
impl<T> OnceLock<T> {
pub const fn new() -> OnceLock<T>;
pub fn get(&self) -> Option<&T>;
pub fn get_mut(&mut self) -> Option<&mut T>;
pub fn set(&self, value: T) -> Result<(), T>;
pub fn get_or_init<F>(&self, f: F) -> &T where F: FnOnce() -> T;
pub fn into_inner(self) -> Option<T>;
pub fn take(&mut self) -> Option<T>;
}
impl<T: Clone> Clone for OnceLock<T>;
impl<T: Debug> Debug for OnceLock<T>;
impl<T> Default for OnceLock<T>;
impl<#[may_dangle] T> Drop for OnceLock<T>;
impl<T> From<T> for OnceLock<T>;
impl<T: PartialEq> PartialEq for OnceLock<T>
impl<T: Eq> Eq for OnceLock<T>;
impl<T: RefUnwindSafe + UnwindSafe> RefUnwindSafe for OnceLock<T>;
unsafe impl<T: Send> Send for OnceLock<T>;
unsafe impl<T: Sync + Send> Sync for OnceLock<T>;
impl<T: UnwindSafe> UnwindSafe for OnceLock<T>;
```
No longer planned as part of this PR, and moved to the `rust_cell_try` feature gate:
```rust
impl<T> OnceCell<T> {
pub fn get_or_try_init<F, E>(&self, f: F) -> Result<&T, E> where F: FnOnce() -> Result<T, E>;
}
impl<T> OnceLock<T> {
pub fn get_or_try_init<F, E>(&self, f: F) -> Result<&T, E> where F: FnOnce() -> Result<T, E>;
}
```
I am new to this process so would appreciate mentorship wherever needed.
The first PR for https://github.com/rust-lang/compiler-team/issues/606
This is just the move-and-rename, because it's plenty big-and-bitrotty already. Future PRs will start using `FieldIdx` more broadly, and concomitantly removing `FieldIdx::new`s.
Since structs are always `VariantIdx(0)`, there's a bunch of files where the only reason they had `VariantIdx` or `vec::Idx` imported at all was to get the first variant.
So this uses a constant for that, and adds some doc-comments to `VariantIdx` while I'm there, since it doesn't have any today.
Instead of building two kinds of drop pair loops, of which only one will
be eventually used at runtime in a given monomorphization, always use
index based loop.
This makes it easier to open the messages file while developing on features.
The commit was the result of automatted changes:
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
(This is a large commit. The changes to
`compiler/rustc_middle/src/ty/context.rs` are the most important ones.)
The current naming scheme is a mess, with a mix of `_intern_`, `intern_`
and `mk_` prefixes, with little consistency. In particular, in many
cases it's easy to use an iterator interner when a (preferable) slice
interner is available.
The guiding principles of the new naming system:
- No `_intern_` prefixes.
- The `intern_` prefix is for internal operations.
- The `mk_` prefix is for external operations.
- For cases where there is a slice interner and an iterator interner,
the former is `mk_foo` and the latter is `mk_foo_from_iter`.
Also, `slice_interners!` and `direct_interners!` can now be `pub` or
non-`pub`, which helps enforce the internal/external operations
division.
It's not perfect, but I think it's a clear improvement.
The following lists show everything that was renamed.
slice_interners
- const_list
- mk_const_list -> mk_const_list_from_iter
- intern_const_list -> mk_const_list
- substs
- mk_substs -> mk_substs_from_iter
- intern_substs -> mk_substs
- check_substs -> check_and_mk_substs (this is a weird one)
- canonical_var_infos
- intern_canonical_var_infos -> mk_canonical_var_infos
- poly_existential_predicates
- mk_poly_existential_predicates -> mk_poly_existential_predicates_from_iter
- intern_poly_existential_predicates -> mk_poly_existential_predicates
- _intern_poly_existential_predicates -> intern_poly_existential_predicates
- predicates
- mk_predicates -> mk_predicates_from_iter
- intern_predicates -> mk_predicates
- _intern_predicates -> intern_predicates
- projs
- intern_projs -> mk_projs
- place_elems
- mk_place_elems -> mk_place_elems_from_iter
- intern_place_elems -> mk_place_elems
- bound_variable_kinds
- mk_bound_variable_kinds -> mk_bound_variable_kinds_from_iter
- intern_bound_variable_kinds -> mk_bound_variable_kinds
direct_interners
- region
- intern_region (unchanged)
- const
- mk_const_internal -> intern_const
- const_allocation
- intern_const_alloc -> mk_const_alloc
- layout
- intern_layout -> mk_layout
- adt_def
- intern_adt_def -> mk_adt_def_from_data (unusual case, hard to avoid)
- alloc_adt_def(!) -> mk_adt_def
- external_constraints
- intern_external_constraints -> mk_external_constraints
Other
- type_list
- mk_type_list -> mk_type_list_from_iter
- intern_type_list -> mk_type_list
- tup
- mk_tup -> mk_tup_from_iter
- intern_tup -> mk_tup
As a part of drop elaboration, we identify dead unwinds, i.e., unwind
edges on a drop terminators which are known to be unreachable, because
there is no need to drop anything.
Previously, the data flow framework was informed about the dead unwinds,
and it assumed those edges are absent from MIR. Unfortunately, the data
flow framework wasn't consistent in maintaining this assumption.
In particular, if a block was reachable only through a dead unwind edge,
its state was propagated to other blocks still. This became an issue in
the context of change removes DropAndReplace terminator, since it
introduces initialization into cleanup blocks.
To avoid this issue, remove unreachable unwind edges before the drop
elaboration, and elaborate only blocks that remain reachable.
Instead of loading the Fluent resources for every crate in
`rustc_error_messages`, each crate generates typed identifiers for its
own diagnostics and creates a static which are pulled together in the
`rustc_driver` crate and provided to the diagnostic emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
Handle discriminant in DataflowConstProp
cc ``@jachris``
r? ``@JakobDegen``
This PR attempts to extend the DataflowConstProp pass to handle propagation of discriminants. We handle this by adding 2 new variants to `TrackElem`: `TrackElem::Variant` for enum variants and `TrackElem::Discriminant` for the enum discriminant pseudo-place.
The difficulty is that the enum discriminant and enum variants may alias each another. This is the issue of the `Option<NonZeroUsize>` test, which is the equivalent of https://github.com/rust-lang/unsafe-code-guidelines/issues/84 with a direct write.
To handle that, we generalize the flood process to flood all the potentially aliasing places. In particular:
- any write to `(PLACE as Variant)`, either direct or through a projection, floods `(PLACE as OtherVariant)` for all other variants and `discriminant(PLACE)`;
- `SetDiscriminant(PLACE)` floods `(PLACE as Variant)` for each variant.
This implies that flooding is not hierarchical any more, and that an assignment to a non-tracked place may need to flood a tracked place. This is handled by `for_each_aliasing_place` which generalizes `preorder_invoke`.
As we deaggregate enums by putting `SetDiscriminant` last, this allows to propagate the value of the discriminant.
This refactor will allow to make https://github.com/rust-lang/rust/pull/107009 able to handle discriminants too.
Treat Drop as a rmw operation
Previously, a Drop terminator was considered a move in MIR. This commit changes the behavior to only treat Drop as a mutable access to the dropped place.
In order for this change to be correct, we need to guarantee that
1. A dropped value won't be used again
2. Places that appear in a drop won't be used again before a
subsequent initialization.
We can ensure this to be correct at MIR construction because Drop will only be emitted when a variable goes out of scope, thus having:
* (1) as there is no way of reaching the old value. drop-elaboration
will also remove any uninitialized drop.
* (2) as the place can't be named following the end of the scope.
However, the initialization status, previously tracked by moves, should also be tied to the execution of a Drop, hence the additional logic in the dataflow analyses.
From discussion in [this thread](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/.60DROP.60.20to.20.60DROP_IF.60.20compiler-team.23558), originating from https://github.com/rust-lang/compiler-team/issues/558.
See also https://github.com/rust-lang/rust/pull/104488#discussion_r1085556010
Previously, a Drop terminator was considered a move in MIR.
This commit changes the behavior to only treat Drop as a mutable
access to the dropped place.
In order for this change to be correct, we need to guarantee that
a) A dropped value won't be used again
b) Places that appear in a drop won't be used again before a
subsequent initialization.
We can ensure this to be correct at MIR construction because Drop
will only be emitted when a variable goes out of scope,
thus having:
(a) as there is no way of reaching the old value. drop-elaboration
will also remove any uninitialized drop.
(b) as the place can't be named following the end of the scope.
However, the initialization status, previously tracked by moves,
should also be tied to the execution of a Drop, hence the
additional logic in the dataflow analyses.
This patch adds a `MirPass` that tracks the number of back-edges and
function calls in the CFG, adds a new MIR instruction to increment a
counter every time they are encountered during Const Eval, and emit a
warning if a configured limit is breached.
Convert all the crates that have had their diagnostic migration
completed (except save_analysis because that will be deleted soon and
apfloat because of the licensing problem).
Improve syntax of `newtype_index`
This makes it more like proper Rust and also makes the implementation a lot simpler.
Mostly just turns weird flags in the body into proper attributes.
It should probably also be converted to an attribute macro instead of function-like, but that can be done in a future PR.
Remove the `..` from the body, only a few invocations used it and it's
inconsistent with rust syntax.
Use `;` instead of `,` between consts. As the Rust syntax gods inteded.
This removes the `custom` format functionality as its only user was
trivially migrated to using a normal format.
If a new use case for a custom formatting impl pops up, you can add it
back.
Inline and remove `place_contents_drop_state_cannot_differ`.
It has a single call site and is hot enough to be worth inlining. And make sure `is_terminal_path` is inlined, too.
r? `@ghost`
compiler: remove unnecessary imports and qualified paths
Some of these imports were necessary before Edition 2021, others were already in the prelude.
I hope it's fine that this PR is so spread-out across files :/
This fixes a number of correctness issues from the previous version. Additionally, we use a new
strategy which has much better performance charactersitics and also finds more opportunities to
apply the optimization.
Remove `mir::CastKind::Misc`
As discussed in #97649 `mir::CastKind::Misc` is not clear, this PR addresses that by creating a new enum variant for every valid cast.
r? ````@oli-obk````
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
Replace `Body::basic_blocks()` with field access
Since the refactoring in #98930, it is possible to borrow the basic blocks
independently from other parts of MIR by accessing the `basic_blocks` field
directly.
Replace unnecessary `Body::basic_blocks()` method with a direct field access,
which has an additional benefit of borrowing the basic blocks only.
A resume place is evaluated and assigned to only after a yield
terminator resumes. Ensure that locals used when evaluating the
resume place are live across the yield.
Remove the unused StableSet and StableMap types from rustc_data_structures.
The current implementation is not "stable" in the same sense that `HashStable` and `StableHasher` are stable, i.e. across compilation sessions. So, in my opinion, it's better to remove those types (which are basically unused anyway) than to give the wrong impression that these are safe for incr. comp.
I plan to provide new "stable" collection types soon that can be used to replace `FxHashMap` and `FxHashSet` in query results (see [draft](69d03ac7a7)). It's unsound that `HashMap` and `HashSet` implement `HashStable` (see https://github.com/rust-lang/rust/issues/98890 for a recent P-critical bug caused by this) -- so we should make some progress there.
Allow destructuring opaque types in their defining scopes
fixes#96572
Before this PR, the following code snippet failed with an incomprehensible error, and similar code just ICEd in mir borrowck.
```rust
type T = impl Copy;
let foo: T = (1u32, 2u32);
let (a, b) = foo;
```
The problem was that the last line created MIR projections of the form `foo.0` and `foo.1`, but `foo`'s type is `T`, which doesn't have fields (only its hidden type does). But the pattern supplies enough type information (a tuple of two different inference types) to bind a hidden type.
Edit `rustc_mir_dataflow::framework::lattice::FlatSet` docs
Cosmetic improvements. Adds a paragraph break, and
ellipses to signify arbitrary size of a flat set.
Remove dereferencing of Box from codegen
Through #94043, #94414, #94873, and #95328, I've been fixing issues caused by Box being treated like a pointer when it is not a pointer. However, these PRs just introduced special cases for Box. This PR removes those special cases and instead transforms a deref of Box into a deref of the pointer it contains.
Hopefully, this is the end of the Box<T, A> ICEs.
once cell renamings
This PR does the renamings proposed in https://github.com/rust-lang/rust/issues/74465#issuecomment-1153703128
- Move/rename `lazy::{OnceCell, Lazy}` to `cell::{OnceCell, LazyCell}`
- Move/rename `lazy::{SyncOnceCell, SyncLazy}` to `sync::{OnceLock, LazyLock}`
(I used `Lazy...` instead of `...Lazy` as it seems to be more consistent, easier to pronounce, etc)
```@rustbot``` label +T-libs-api -T-libs
`BitSet` related perf improvements
This commit makes two changes:
1. Changes `MaybeLiveLocals` to use `ChunkedBitSet`
2. Overrides the `fold` method for the iterator for `ChunkedBitSet`
I have local benchmarks verifying that each of these changes individually yield significant perf improvements to #96451 . I'm hoping this will be true outside of that context too. If that is not the case, I'll try to gate things on where they help as needed
r? `@nnethercote` who I believe was working on closely related things, cc `@tmiasko` because of the destprop pr
Change `Direction::{is_forward,is_backward}` functions into constants
Make it explicit that the analysis direction is constant.
This also makes the value immediately available for optimizations.
Previously those functions were neither inline nor generic and so their
definition was unavailable when using data flow framework from other
crates.
Make it explicit that the analysis direction is constant.
This also makes the value immediately available for optimizations.
Previously those functions were neither inline nor generic and so their
definition was unavailable when using data flow framework from other
crates.
Lifetime variance fixes for rustc
#97287 migrates rustc to a `Ty` type that is invariant over its lifetime `'tcx`, so I need to fix a bunch of places that assume that `Ty<'a>` and `Ty<'b>` can be unified by shortening both to some common lifetime.
This is doable, since many lifetimes are already `'tcx`, so all this PR does is be a bit more explicit that elided lifetimes are actually `'tcx`.
Split out from #97287 so the compiler team can review independently.
Add a query for checking whether a function is an intrinsic.
work towards #93145
This will reduce churn when we add more ways to declare intrinsics
r? `@scottmcm`
Switch sources are used by backward analysis with a custom switch int
edge effects, but are otherwise unnecessarily computed.
Delay the computation until we know that switch sources are indeed
required and avoid the computation otherwise.
Begin fixing all the broken doctests in `compiler/`
Begins to fix#95994.
All of them pass now but 24 of them I've marked with `ignore HELP (<explanation>)` (asking for help) as I'm unsure how to get them to work / if we should leave them as they are.
There are also a few that I marked `ignore` that could maybe be made to work but seem less important.
Each `ignore` has a rough "reason" for ignoring after it parentheses, with
- `(pseudo-rust)` meaning "mostly rust-like but contains foreign syntax"
- `(illustrative)` a somewhat catchall for either a fragment of rust that doesn't stand on its own (like a lone type), or abbreviated rust with ellipses and undeclared types that would get too cluttered if made compile-worthy.
- `(not-rust)` stuff that isn't rust but benefits from the syntax highlighting, like MIR.
- `(internal)` uses `rustc_*` code which would be difficult to make work with the testing setup.
Those reason notes are a bit inconsistently applied and messy though. If that's important I can go through them again and try a more principled approach. When I run `rg '```ignore \(' .` on the repo, there look to be lots of different conventions other people have used for this sort of thing. I could try unifying them all if that would be helpful.
I'm not sure if there was a better existing way to do this but I wrote my own script to help me run all the doctests and wade through the output. If that would be useful to anyone else, I put it here: https://github.com/Elliot-Roberts/rust_doctest_fixing_tool
This commit makes `AdtDef` use `Interned`. Much the commit is tedious
changes to introduce getter functions. The interesting changes are in
`compiler/rustc_middle/src/ty/adt.rs`.
Introduce `ChunkedBitSet` and use it for some dataflow analyses.
This reduces peak memory usage significantly for some programs with very
large functions.
r? `@ghost`
This reduces peak memory usage significantly for some programs with very
large functions, such as:
- `keccak`, `unicode_normalization`, and `match-stress-enum`, from
the `rustc-perf` benchmark suite;
- `http-0.2.6` from crates.io.
The new type is used in the analyses where the bitsets can get huge
(e.g. 10s of thousands of bits): `MaybeInitializedPlaces`,
`MaybeUninitializedPlaces`, and `EverInitializedPlaces`.
Some refactoring was required in `rustc_mir_dataflow`. All existing
analysis domains are either `BitSet` or a trivial wrapper around
`BitSet`, and access in a few places is done via `Borrow<BitSet>` or
`BorrowMut<BitSet>`. Now that some of these domains are `ClusterBitSet`,
that no longer works. So this commit replaces the `Borrow`/`BorrowMut`
usage with a new trait `BitSetExt` containing the needed bitset
operations. The impls just forward these to the underlying bitset type.
This required fiddling with trait bounds in a few places.
The commit also:
- Moves `static_assert_size` from `rustc_data_structures` to
`rustc_index` so it can be used in the latter; the former now
re-exports it so existing users are unaffected.
- Factors out some common "clear excess bits in the final word"
functionality in `bit_set.rs`.
- Uses `fill` in a few places instead of loops.
Specifically, change `Ty` from this:
```
pub type Ty<'tcx> = &'tcx TyS<'tcx>;
```
to this
```
pub struct Ty<'tcx>(Interned<'tcx, TyS<'tcx>>);
```
There are two benefits to this.
- It's now a first class type, so we can define methods on it. This
means we can move a lot of methods away from `TyS`, leaving `TyS` as a
barely-used type, which is appropriate given that it's not meant to
be used directly.
- The uniqueness requirement is now explicit, via the `Interned` type.
E.g. the pointer-based `Eq` and `Hash` comes from `Interned`, rather
than via `TyS`, which wasn't obvious at all.
Much of this commit is boring churn. The interesting changes are in
these files:
- compiler/rustc_middle/src/arena.rs
- compiler/rustc_middle/src/mir/visit.rs
- compiler/rustc_middle/src/ty/context.rs
- compiler/rustc_middle/src/ty/mod.rs
Specifically:
- Most mentions of `TyS` are removed. It's very much a dumb struct now;
`Ty` has all the smarts.
- `TyS` now has `crate` visibility instead of `pub`.
- `TyS::make_for_test` is removed in favour of the static `BOOL_TY`,
which just works better with the new structure.
- The `Eq`/`Ord`/`Hash` impls are removed from `TyS`. `Interned`s impls
of `Eq`/`Hash` now suffice. `Ord` is now partly on `Interned`
(pointer-based, for the `Equal` case) and partly on `TyS`
(contents-based, for the other cases).
- There are many tedious sigil adjustments, i.e. adding or removing `*`
or `&`. They seem to be unavoidable.
The field is also renamed from `ident` to `name. In most cases,
we don't actually need the `Span`. A new `ident` method is added
to `VariantDef` and `FieldDef`, which constructs the full `Ident`
using `tcx.def_ident_span()`. This method is used in the cases
where we actually need an `Ident`.
This makes incremental compilation properly track changes
to the `Span`, without all of the invalidations caused by storing
a `Span` directly via an `Ident`.
Remove `NullOp::Box`
Follow up of #89030 and MCP rust-lang/compiler-team#460.
~1 month later nothing seems to be broken, apart from a small regression that #89332 (1aac85bb716c09304b313d69d30d74fe7e8e1a8e) shows could be regained by remvoing the diverging path, so it shall be safe to continue and remove `NullOp::Box` completely.
r? `@jonas-schievink`
`@rustbot` label T-compiler
Add a MIR pass manager (Taylor's Version)
The final draft of #91386 and #77665.
While the compile-time constraints in #91386 are cool, I decided on a more minimal approach for now. I want to explore phase constraints and maybe relative-ordering constraints in the future, though. This should preserve existing behavior **exactly** (please let me know if it doesn't) while making the following changes to the way we organize things today:
- Each `MirPhase` now corresponds to a single MIR pass. `run_passes` is not responsible for listing the correct MIR phase.
- `run_passes` no longer silently skips passes if the declared MIR phase is greater than or equal to the body's. This has bitten me multiple times. If you want this behavior, you can always branch on `body.phase` yourself.
- If your pass is solely to emit errors, you can use the `MirLint` interface instead, which gets a shared reference to `Body` instead of a mutable one. By differentiating the two, I hope to make it clearer in the short term where lints belong in the pipeline. In the long term perhaps we could enforce this at compile-time?
- MIR is no longer dumped for passes that aren't enabled, or for lints.
I tried to check that `-Zvalidate` still works correctly, since the MIR phase is now updated as soon as the associated pass is done, instead of at the end of all the passes in `run_passes`. However, it looks like `-Zvalidate` is broken with current nightlies anyways 😢 (it spits out a bunch of errors).
cc `@oli-obk` `@wesleywiser`
r? rust-lang/wg-mir-opt
Mark places as initialized when mutably borrowed
Fixes the example in #90752, but does not handle some corner cases involving raw pointers and unsafe. See [this comment](https://github.com/rust-lang/rust/issues/90752#issuecomment-965822895) for more information, or the second test.
Although I talked about both `MaybeUninitializedPlaces` and `MaybeInitializedPlaces` in #90752, this PR only changes the latter. That's because "maybe uninitialized" is the conservative choice, and marking them as definitely initialized (`!maybe_uninitialized`) when a mutable borrow is created could lead to problems if `addr_of_mut` to an uninitialized local is allowed. Additionally, places cannot become uninitialized via a mutable reference, so if a place is definitely initialized, taking a mutable reference to it should not change that.
I think it's correct to ignore interior mutability as nbdd0121 suggests below. Their analysis doesn't work inside of `core::cell`, which *does* have access to `UnsafeCell`'s field, but that won't be an issue unless we explicitly instantiate one with an `enum` within that module.
r? `@wesleywiser`
