Currently it's a method on `EarlyDiagCtxt`, which is not the right place
for it at all -- `EarlyDiagCtxt` is used to issue diagnostics, but
shouldn't be doing any of the actual checking.
This commit moves it into a standalone function that takes an
`EarlyDiagCtxt` as an argument, which is more sensible. This does
require adding `EarlyDiagCtxt::early_struct_warn`, so a warning can be
returned and then modified with a note. (And that likely explains why
somebody put `initialize_checked_jobserver` into `EarlyDiagCtxt` in the
first place.)
Currently `SourceMap` is constructed slightly later than
`SessionGlobals`, and inserted. This commit changes things so they are
done at the same time.
Benefits:
- `SessionGlobals::source_map` changes from
`Lock<Option<Lrc<SourceMap>>>` to `Option<Lrc<SourceMap>>`. It's still
optional, but mutability isn't required because it's initialized at
construction.
- `set_source_map` is removed, simplifying `run_compiler`, which is
good because that's a critical function and it's nice to make it
simpler.
This requires moving things around a bit, so the necessary inputs are
available when `SessionGlobals` is created, in particular the `loader`
and `hash_kind`, which are no longer computed by `build_session`. These
inputs are captured by the new `SourceMapInputs` type, which is threaded
through various places.
conditionally ignore fatal diagnostic in the SilentEmitter
This change is primarily meant to allow rustfmt to ignore all diagnostics when using the `SilentEmitter`. Back in #121301 the `SilentEmitter` was shared between rustc and rustfmt. This changed rustfmt's behavior from ignoring all diagnostic to emitting fatal diagnostics, which lead to https://github.com/rust-lang/rustfmt/issues/6109.
These changes allow rustfmt to maintain its previous behaviour when using the `SilentEmitter`, while allowing rustc code to still emit fatal diagnostics.
Suggest `RUST_MIN_STACK` workaround on overflow
For some Rust crates, like p384, we can't do a whole lot about it even if the stack overflow is reported like in rust-lang/rust#122357 because the problem may be inside LLVM or another codegen backend. We can, however, suggest people set a new `RUST_MIN_STACK` value while handling the SIGSEGV, as that stack-setting will carry forward into the dylib.
As a bonus, this also leads to cleaning up the stack-setting code a bit.
Backend and target selection is a mess: the target can override the
backend (via `Target::default_codegen_backend`), *and* the backend can
override the target (via `CodegenBackend::target_override`).
The code that handles this is ugly. It calls `build_target_config`
twice, once before getting the backend and once again afterward. It also
must check that both overrides aren't triggering at the same time.
This commit removes the latter override. It's used in rust-gpu but
@eddyb said via Zulip that removing it would be ok. This simplifies the
code greatly, and will allow some nice follow-up refactorings.
This change is primarily meant to allow rustfmt to ignore all
diagnostics when using the `SilentEmitter`. Back in PR 121301 the
`SilentEmitter` was shared between rustc and rustfmt. This changed
rustfmt's behavior from ignoring all diagnostic to emitting fatal
diagnostics.
These changes allow rustfmt to maintain it's previous behaviour when
using the SilentEmitter, while allowing rustc code to still emit fatal
diagnostics.
Make incremental sessions identity no longer depend on the crate names provided by source code
This makes incremental sessions identity no longer depend on the crate names provided by source code, implementing
https://github.com/rust-lang/compiler-team/issues/726.
r? ````@oli-obk````
coverage: Remove or migrate all unstable values of `-Cinstrument-coverage`
(This PR was substantially overhauled from its original version, which migrated all of the existing unstable values intact.)
This PR takes the three nightly-only values that are currently accepted by `-Cinstrument-coverage`, completely removes two of them (`except-unused-functions` and `except-unused-generics`), and migrates the third (`branch`) over to a newly-introduced unstable flag `-Zcoverage-options`.
I have a few motivations for wanting to do this:
- It's unclear whether anyone actually uses the `except-unused-*` values, so this serves as an opportunity to either remove them, or prompt existing users to object to their removal.
- After #117199, the stable values of `-Cinstrument-coverage` treat it as a boolean-valued flag, so having nightly-only extra values feels out-of-place.
- Nightly-only values also require extra ad-hoc code to make sure they aren't accidentally exposed to stable users.
- The new system allows multiple different settings to be toggled independently, which isn't possible in the current single-value system.
- The new system makes it easier to introduce new behaviour behind an unstable toggle, and then gather nightly-user feedback before possibly making it the default behaviour for all users.
- The new system also gives us a convenient place to put relatively-narrow options that won't ever be the default, but that nightly users might still want access to.
- It's likely that we will eventually want to give stable users more fine-grained control over coverage instrumentation. The new flag serves as a prototype of what that stable UI might eventually look like.
The `branch` option is a placeholder that currently does nothing. It will be used by #122322 to opt into branch coverage instrumentation.
---
I see `-Zcoverage-options` as something that will exist more-or-less indefinitely, though individual sub-options might come and go as appropriate. I think there will always be some demand for nightly-only toggles, so I don't see `-Zcoverage-options` itself ever being stable, though we might eventually stabilize something similar to it.
Verify that query keys result in unique dep nodes
This implements checking that query keys result into unique dep nodes as mentioned in https://github.com/rust-lang/rust/pull/112469.
We could do a perf check to see how expensive this is.
r? `@michaelwoerister`
This new nightly-only flag can be used to toggle fine-grained flags that
control the details of coverage instrumentation.
Currently the only supported flag value is `branch` (or `no-branch`), which is
a placeholder for upcoming support for branch coverage. Other flag values can
be added in the future, to prototype proposed new behaviour, or to enable
special non-default behaviour.
Rollup of 15 pull requests
Successful merges:
- #116791 (Allow codegen backends to opt-out of parallel codegen)
- #116793 (Allow targets to override default codegen backend)
- #117458 (LLVM Bitcode Linker: A self contained linker for nvptx and other targets)
- #119385 (Fix type resolution of associated const equality bounds (take 2))
- #121438 (std support for wasm32 panic=unwind)
- #121893 (Add tests (and a bit of cleanup) for interior mut handling in promotion and const-checking)
- #122080 (Clarity improvements to `DropTree`)
- #122152 (Improve diagnostics for parenthesized type arguments)
- #122166 (Remove the unused `field_remapping` field from `TypeLowering`)
- #122249 (interpret: do not call machine read hooks during validation)
- #122299 (Store backtrace for `must_produce_diag`)
- #122318 (Revision-related tweaks for next-solver tests)
- #122320 (Use ptradd for vtable indexing)
- #122328 (unix_sigpipe: Replace `inherit` with `sig_dfl` in syntax tests)
- #122330 (bootstrap readme: fix, improve, update)
r? `@ghost`
`@rustbot` modify labels: rollup
This improves parallel rustc parallelism by avoiding the bottleneck after each individual `par_body_owners` (because it needs to wait for queries to finish, so if there is one long running one, a lot of cores will be idle while waiting for the single query).
Remove `feed_local_def_id`
best reviewed commit by commit
Basically I returned `TyCtxtFeed` from `create_def` and then preserved that in the local caches
based on https://github.com/rust-lang/rust/pull/121084
r? ````@petrochenkov````
Rework `untranslatable_diagnostic` lint
Currently it only checks calls to functions marked with `#[rustc_lint_diagnostics]`. This PR changes it to check calls to any function with an `impl Into<{D,Subd}iagnosticMessage>` parameter. This greatly improves its coverage and doesn't rely on people remembering to add `#[rustc_lint_diagnostics]`. It also lets us add `#[rustc_lint_diagnostics]` to a number of functions that don't have an `impl Into<{D,Subd}iagnosticMessage>`, such as `Diag::span`.
r? ``@davidtwco``
Currently it only checks calls to functions marked with
`#[rustc_lint_diagnostics]`. This commit changes it to check calls to
any function with an `impl Into<{D,Subd}iagMessage>` parameter. This
greatly improves its coverage and doesn't rely on people remembering to
add `#[rustc_lint_diagnostics]`.
The commit also adds `#[allow(rustc::untranslatable_diagnostic)`]
attributes to places that need it that are caught by the improved lint.
These places that might be easy to convert to translatable diagnostics.
Finally, it also:
- Expands and corrects some comments.
- Does some minor formatting improvements.
- Adds missing `DecorateLint` cases to
`tests/ui-fulldeps/internal-lints/diagnostics.rs`.
Existing names for values of this type are `sess`, `parse_sess`,
`parse_session`, and `ps`. `sess` is particularly annoying because
that's also used for `Session` values, which are often co-located, and
it can be difficult to know which type a value named `sess` refers to.
(That annoyance is the main motivation for this change.) `psess` is nice
and short, which is good for a name used this much.
The commit also renames some `parse_sess_created` values as
`psess_created`.
Adds initial support for DataFlowSanitizer to the Rust compiler. It
currently supports `-Zsanitizer-dataflow-abilist`. Additional options
for it can be passed to LLVM command line argument processor via LLVM
arguments using `llvm-args` codegen option (e.g.,
`-Cllvm-args=-dfsan-combine-pointer-labels-on-load=false`).
Unify dylib loading between proc macros and codegen backends
As bonus this makes the errors when failing to load a proc macro more informative to match the backend loading errors. In addition it makes it slightly easier to patch rustc to work on platforms that don't support dynamic linking like wasm.
Currently `emit_stashed_diagnostic` is called from four(!) different
places: `print_error_count`, `DiagCtxtInner::drop`, `abort_if_errors`,
and `compile_status`.
And `flush_delayed` is called from two different places:
`DiagCtxtInner::drop` and `Queries`.
This is pretty gross! Each one should really be called from a single
place, but there's a bunch of entanglements. This commit cleans up this
mess.
Specifically, it:
- Removes all the existing calls to `emit_stashed_diagnostic`, and adds
a single new call in `finish_diagnostics`.
- Removes the early `flush_delayed` call in `codegen_and_build_linker`,
replacing it with a simple early return if delayed bugs are present.
- Changes `DiagCtxtInner::drop` and `DiagCtxtInner::flush_delayed` so
they both assert that the stashed diagnostics are empty (i.e.
processed beforehand).
- Changes `interface::run_compiler` so that any errors emitted during
`finish_diagnostics` (i.e. late-emitted stashed diagnostics) are
counted and cannot be overlooked. This requires adding
`ErrorGuaranteed` return values to several functions.
- Removes the `stashed_err_count` call in `analysis`. This is possible
now that we don't have to worry about calling `flush_delayed` early
from `codegen_and_build_linker` when stashed diagnostics are pending.
- Changes the `span_bug` case in `handle_tuple_field_pattern_match` to a
`delayed_span_bug`, because it now can be reached due to the removal
of the `stashed_err_count` call in `analysis`.
- Slightly changes the expected output of three tests. If no errors are
emitted but there are delayed bugs, the error count is no longer
printed. This is because delayed bugs are now always printed after the
error count is printed (or not printed, if the error count is zero).
There is a lot going on in this commit. It's hard to break into smaller
pieces because the existing code is very tangled. It took me a long time
and a lot of effort to understand how the different pieces interact, and
I think the new code is a lot simpler and easier to understand.
Currently `has_errors` excludes lint errors. This commit changes it to
include lint errors.
The motivation for this is that for most places it doesn't matter
whether lint errors are included or not. But there are multiple places
where they must be includes, and only one place where they must not be
included. So it makes sense for `has_errors` to do the thing that fits
the most situations, and the new `has_errors_excluding_lint_errors`
method in the one exceptional place.
The same change is made for `err_count`. Annoyingly, this requires the
introduction of `err_count_excluding_lint_errs` for one place, to
preserve existing error printing behaviour. But I still think the change
is worthwhile overall.
As bonus this makes the errors when failing to load a proc macro more
informative to match the backend loading errors. In addition it makes it
slightly easier to patch rustc to work on platforms that don't support
dynamic linking like wasm.
Remove more `#[macro_use] extern crate tracing`
Because explicit importing of macros via use items is nicer (more standard and readable) than implicit importing via `#[macro_use]`. Continuing the work from #124511 and #124914.
r? `@jackh726`
Translation of the lint message happens when the actual diagnostic is
created, not when the lint is buffered. Generating the message from
BuiltinLintDiag ensures that all required data to construct the message
is preserved in the LintBuffer, eventually allowing the messages to be
moved to fluent.
Remove the `msg` field from BufferedEarlyLint, it is either generated
from the data in the BuiltinLintDiag or stored inside
BuiltinLintDiag::Normal.
An earlier commit included the change for a suggestion here.
Unfortunately, it also used unwrap instead of dying properly.
Roll out the ~~rice paper~~ EarlyDiagCtxt before we do anything that
might leave a mess.
Trim crate graph
This PR removes some unnecessary `Cargo.toml` entries, and makes some other small related cleanups that I found while looking at this stuff.
r? ```@pnkfelix```
Change `SIGPIPE` ui from `#[unix_sigpipe = "..."]` to `-Zon-broken-pipe=...`
In the stabilization [attempt](https://github.com/rust-lang/rust/pull/120832) of `#[unix_sigpipe = "sig_dfl"]`, a concern was [raised ](https://github.com/rust-lang/rust/pull/120832#issuecomment-2007394609) related to using a language attribute for the feature: Long term, we want `fn lang_start()` to be definable by any crate, not just libstd. Having a special language attribute in that case becomes awkward.
So as a first step towards the next stabilization attempt, this PR changes the `#[unix_sigpipe = "..."]` attribute to a compiler flag `-Zon-broken-pipe=...` to remove that concern, since now the language is not "contaminated" by this feature.
Another point was [also raised](https://github.com/rust-lang/rust/pull/120832#issuecomment-1987023484), namely that the ui should not leak **how** it does things, but rather what the **end effect** is. The new flag uses the proposed naming. This is of course something that can be iterated on further before stabilization.
Tracking issue: https://github.com/rust-lang/rust/issues/97889
There are a few common abbreviations like `use rustc_ast as ast` and
`use rust_hir as hir` for names that are used a lot. But there are also
some cases where a crate is renamed just once in the whole codebase, and
that ends up making things harder to read rather than easier. This
commit removes them.
In the stabilization attempt of `#[unix_sigpipe = "sig_dfl"]`, a concern
was raised related to using a language attribute for the feature: Long
term, we want `fn lang_start()` to be definable by any crate, not just
libstd. Having a special language attribute in that case becomes
awkward.
So as a first step towards towards the next stabilization attempt, this
PR changes the `#[unix_sigpipe = "..."]` attribute to a compiler flag
`-Zon-broken-pipe=...` to remove that concern, since now the language
is not "contaminated" by this feature.
Another point was also raised, namely that the ui should not leak
**how** it does things, but rather what the **end effect** is. The new
flag uses the proposed naming. This is of course something that can be
iterated on further before stabilization.
Fix `ErrorGuaranteed` unsoundness with stash/steal.
When you stash an error, the error count is incremented. You can then use the non-zero error count to get an `ErrorGuaranteed`. You can then steal the error, which decrements the error count. You can then cancel the error.
Example code:
```
fn unsound(dcx: &DiagCtxt) -> ErrorGuaranteed {
let sp = rustc_span::DUMMY_SP;
let k = rustc_errors::StashKey::Cycle;
dcx.struct_err("bogus").stash(sp, k); // increment error count on stash
let guar = dcx.has_errors().unwrap(); // ErrorGuaranteed from error count > 0
let err = dcx.steal_diagnostic(sp, k).unwrap(); // decrement error count on steal
err.cancel(); // cancel error
guar // ErrorGuaranteed with no error emitted!
}
```
This commit fixes the problem in the simplest way: by not counting stashed errors in `DiagCtxt::{err_count,has_errors}`.
However, just doing this without any other changes leads to over 40 ui test failures. Mostly because of uninteresting extra errors (many saying "type annotations needed" when type inference fails), and in a few cases, due to delayed bugs causing ICEs when no normal errors are printed.
To fix these, this commit adds `DiagCtxt::stashed_err_count`, and uses it in three places alongside `DiagCtxt::{has_errors,err_count}`. It's dodgy to rely on it, because unlike `DiagCtxt::err_count` it can go up and down. But it's needed to preserve existing behaviour, and at least the three places that need it are now obvious.
r? oli-obk
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
When you stash an error, the error count is incremented. You can then
use the non-zero error count to get an `ErrorGuaranteed`. You can then
steal the error, which decrements the error count. You can then cancel
the error.
Example code:
```
fn unsound(dcx: &DiagCtxt) -> ErrorGuaranteed {
let sp = rustc_span::DUMMY_SP;
let k = rustc_errors::StashKey::Cycle;
dcx.struct_err("bogus").stash(sp, k); // increment error count on stash
let guar = dcx.has_errors().unwrap(); // ErrorGuaranteed from error count > 0
let err = dcx.steal_diagnostic(sp, k).unwrap(); // decrement error count on steal
err.cancel(); // cancel error
guar // ErrorGuaranteed with no error emitted!
}
```
This commit fixes the problem in the simplest way: by not counting
stashed errors in `DiagCtxt::{err_count,has_errors}`.
However, just doing this without any other changes leads to over 40 ui
test failures. Mostly because of uninteresting extra errors (many saying
"type annotations needed" when type inference fails), and in a few
cases, due to delayed bugs causing ICEs when no normal errors are
printed.
To fix these, this commit adds `DiagCtxt::stashed_err_count`, and uses
it in three places alongside `DiagCtxt::{has_errors,err_count}`. It's
dodgy to rely on it, because unlike `DiagCtxt::err_count` it can go up
and down. But it's needed to preserve existing behaviour, and at least
the three places that need it are now obvious.
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
Track `verbose` and `verbose_internals`
`verbose_internals` has been UNTRACKED since it was introduced. When i added `verbose` in https://github.com/rust-lang/rust/pull/119129 i made it UNTRACKED as well.
``@bjorn3`` says: https://github.com/rust-lang/rust/pull/119286#discussion_r1436134354
> On errors we don't finalize the incr comp cache, but non-fatal diagnostics are cached afaik.
Otherwise we would have to replay the query in question, which we may not be able to do if the query key is not reconstructible from the dep node fingerprint.
So we must track these flags to avoid replaying incorrect diagnostics.
r? incremental
bjorn3 says:
> On errors we don't finalize the incr comp cache, but non-fatal diagnostics are cached afaik.
Otherwise we would have to replay the query in question, which we may not be able to do if the query
key is not reconstructible from the dep node fingerprint.
So we must track these flags to avoid replaying incorrect diagnostics.
Improved collapse_debuginfo attribute, added command-line flag
Improved attribute collapse_debuginfo with variants: `#[collapse_debuginfo=(no|external|yes)]`.
Added command-line flag for default behaviour.
Work-in-progress: will add more tests.
cc https://github.com/rust-lang/rust/issues/100758
Add explicit `none()` value variant in check-cfg
This PR adds an explicit none value variant in check-cfg values: `values(none())`.
Currently the only way to define the none variant is with an empty `values()` which means that if someone has a cfg that takes none and strings they need to use two invocations: `--check-cfg=cfg(foo) --check-cfg=cfg(foo, values("bar"))`.
Which would now be `--check-cfg=cfg(foo, values(none(),"bar"))`, this is simpler and easier to understand.
`--check-cfg=cfg(foo)`, `--check-cfg=cfg(foo, values())` and `--check-cfg=cfg(foo, values(none()))` would be equivalent.
*Another motivation for doing this is to make empty `values()` actually means no-values, but this is orthogonal to this PR and adding `none()` is sufficient in it-self.*
`@rustbot` label +F-check-cfg
r? `@petrochenkov`
One consequence is that errors returned by
`maybe_new_parser_from_source_str` now must be consumed, so a bunch of
places that previously ignored those errors now cancel them. (Most of
them explicitly dropped the errors before. I guess that was to indicate
"we are explicitly ignoring these", though I'm not 100% sure.)
It was added in #54232. It seems like it was aimed at NLL development,
which is well in the past. Also, it looks like `-Ztreat-err-as-bug` can
be used to achieve the same effect. So it doesn't seem necessary.
They are no longer used, because
`{DiagCtxt,DiagCtxtInner}::emit_diagnostic` are used everywhere instead.
This also means `track_diagnostic` can become consuming.
This works for most of its call sites. This is nice, because `emit` very
much makes sense as a consuming operation -- indeed,
`DiagnosticBuilderState` exists to ensure no diagnostic is emitted
twice, but it uses runtime checks.
For the small number of call sites where a consuming emit doesn't work,
the commit adds `DiagnosticBuilder::emit_without_consuming`. (This will
be removed in subsequent commits.)
Likewise, `emit_unless` becomes consuming. And `delay_as_bug` becomes
consuming, while `delay_as_bug_without_consuming` is added (which will
also be removed in subsequent commits.)
All this requires significant changes to `DiagnosticBuilder`'s chaining
methods. Currently `DiagnosticBuilder` method chaining uses a
non-consuming `&mut self -> &mut Self` style, which allows chaining to
be used when the chain ends in `emit()`, like so:
```
struct_err(msg).span(span).emit();
```
But it doesn't work when producing a `DiagnosticBuilder` value,
requiring this:
```
let mut err = self.struct_err(msg);
err.span(span);
err
```
This style of chaining won't work with consuming `emit` though. For
that, we need to use to a `self -> Self` style. That also would allow
`DiagnosticBuilder` production to be chained, e.g.:
```
self.struct_err(msg).span(span)
```
However, removing the `&mut self -> &mut Self` style would require that
individual modifications of a `DiagnosticBuilder` go from this:
```
err.span(span);
```
to this:
```
err = err.span(span);
```
There are *many* such places. I have a high tolerance for tedious
refactorings, but even I gave up after a long time trying to convert
them all.
Instead, this commit has it both ways: the existing `&mut self -> Self`
chaining methods are kept, and new `self -> Self` chaining methods are
added, all of which have a `_mv` suffix (short for "move"). Changes to
the existing `forward!` macro lets this happen with very little
additional boilerplate code. I chose to add the suffix to the new
chaining methods rather than the existing ones, because the number of
changes required is much smaller that way.
This doubled chainging is a bit clumsy, but I think it is worthwhile
because it allows a *lot* of good things to subsequently happen. In this
commit, there are many `mut` qualifiers removed in places where
diagnostics are emitted without being modified. In subsequent commits:
- chaining can be used more, making the code more concise;
- more use of chaining also permits the removal of redundant diagnostic
APIs like `struct_err_with_code`, which can be replaced easily with
`struct_err` + `code_mv`;
- `emit_without_diagnostic` can be removed, which simplifies a lot of
machinery, removing the need for `DiagnosticBuilderState`.
Remove `-Zreport-delayed-bugs`.
It's not used within the repository in any way (e.g. in tests), and doesn't seem useful.
It was added in #52568.
r? ````@oli-obk````
Remove `-Zdump-mir-spanview`
The `-Zdump-mir-spanview` flag was added back in #76074, as a development/debugging aid for the initial work on what would eventually become `-Cinstrument-coverage`. It causes the compiler to emit an HTML file containing a function's source code, with various spans highlighted based on the contents of MIR.
When the suggestion was made to [triage and remove unnecessary `-Z` flags (Zulip)](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/.60-Z.60.20option.20triage), I noted that this flag could potentially be worth removing, but I wanted to keep it around to see whether I found it useful for my own coverage work.
But when I actually tried to use it, I ran into various issues (e.g. it crashes on `tests/coverage/closure.rs`). If I can't trust it to work properly without a full overhaul, then instead of diving down a rabbit hole of trying to fix arcane span-handling bugs, it seems better to just remove this obscure old code entirely.
---
````@rustbot```` label +A-code-coverage
rework `-Zverbose`
implements the changes described in https://github.com/rust-lang/compiler-team/issues/706
the first commit is only a name change from `-Zverbose` to `-Zverbose-internals` and does not change behavior. the second commit changes diagnostics.
possible follow up work:
- `ty::pretty` could print more info with `--verbose` than it does currently. `-Z verbose-internals` shows too much info in a way that's not helpful to users. michael had ideas about this i didn't fully understand: https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/uplift.20some.20-Zverbose.20calls.20and.20rename.20to.E2.80.A6.20compiler-team.23706/near/408984200
- `--verbose` should imply `-Z write-long-types-to-disk=no`. the code in `ty_string_with_limit` should take `--verbose` into account (apparently this affects `Ty::sort_string`, i'm not familiar with this code). writing a file to disk should suggest passing `--verbose`.
r? `@compiler-errors` cc `@estebank`
detects redundant imports that can be eliminated.
for #117772 :
In order to facilitate review and modification, split the checking code and
removing redundant imports code into two PR.
`build_session` is passed an `EarlyErrorHandler` and then constructs a
`Handler`. But the `EarlyErrorHandler` is still used for some time after
that.
This commit changes `build_session` so it consumes the passed
`EarlyErrorHandler`, and also drops it as soon as the `Handler` is
built. As a result, `parse_cfg` and `parse_check_cfg` now take a
`Handler` instead of an `EarlyErrorHandler`.
Instead of allowing `rustc::potential_query_instability` on the whole
crate we go over each lint and allow it individually if it is safe to
do. Turns out all instances were safe to allow in this crate.
This is intended to be used for Linux kernel RETHUNK builds.
With this commit (optionally backported to Rust 1.73.0), plus a
patched Linux kernel to pass the flag, I get a RETHUNK build with
Rust enabled that is `objtool`-warning-free and is able to boot in
QEMU and load a sample Rust kernel module.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Eagerly compute output_filenames
It can be computed before creating TyCtxt. Previously the query would also write the dep info file, which meant that the output filenames couldn't be accessed before macro expansion is done. The dep info file writing is now done as a separate non-query function. The old query was always executed again anyways due to depending on the HIR.
Also encode the output_filenames in rlink files to ensure `#![crate_name]` affects the linking stage when doing separate compiling and linking using `-Zno-link`/`-Zlink-only`.
