fix: move test that require mut to another
Adding TODOs for Option::take and Option::copied
TODO to FIXME + moving const stability under normal
Moving const stability attr under normal stab attr
move more rustc stability attributes
Add Saturating type (based on Wrapping type)
Tracking #87920
### Unresolved Questions
<!--
Include any open questions that need to be answered before the feature can be
stabilised.
-->
- [x] ~`impl Div for Saturating<T>` falls back on inner integer division - which seems alright?~
- [x] add `saturating_div`? (to respect division by `-1`)
- [x] There is no `::saturating_shl` and `::saturating_shr`. (How to) implement `Shl`, `ShlAssign`, `Shr` and `ShrAssign`?
- [naively](3f7d2ce28f)
- [x] ~`saturating_neg` is only implemented on [signed integer types](https://doc.rust-lang.org/std/?search=saturating_n)~
- [x] Is the implementation copied over from the `Wrapping`-type correct for `Saturating`?
- [x] `Saturating::rotate_left`
- [x] `Saturating::rotate_right`
- [x] `Not`
- [x] `BitXorOr` and `BitXorOrAssign`
- [x] `BitOr` and `BitOrAssign`
- [x] `BitAnd` and `BitAndAssign`
- [x] `Saturating::swap_bytes`
- [x] `Saturating::reverse_bits`
Use if-let guards in the codebase and various other pattern cleanups
Dogfooding if-let guards as experimentation for the feature.
Tracking issue #51114. Conflicts with #87937.
Add SAFETY comments to core::slice::sort::partition_in_blocks
A few more SAFETY comments for #66219. There are still a few more in this module.
`@rustbot` label T-libs T-compiler C-cleanup
Fix references to `ControlFlow` in docs
The `Iterator::for_each` method previously stated that it was not possible to use `break` and `continue` in it — this has been updated to acknowledge the stabilization of `ControlFlow`. Additionally, `ControlFlow` was referred to as `crate::ops::ControlFlow` which is not the correct path for an end user.
r? `@jyn514`
add Cell::as_array_of_cells, similar to Cell::as_slice_of_cells
I'd like to propose adding `Cell::as_array_of_cells`, as a natural analog to `Cell::as_slice_of_cells`. I don't have a specific use case in mind, other than that supporting slices but not arrays feels like a gap. Do other folks agree with that intuition? Would this addition be substantial enough to need an RFC?
---
Previously, converting `&mut [T; N]` to `&[Cell<T>; N]` looks like this:
```rust
let array = &mut [1, 2, 3];
let cells: &[Cell<i32>; 3] = Cell::from_mut(&mut array[..])
.as_slice_of_cells()
.try_into()
.unwrap();
```
With this new helper method, it looks like this:
```rust
let array = &mut [1, 2, 3];
let cells = Cell::from_mut(array).as_array_of_cells();
```
Get piece unchecked in `write`
We already use specialized `zip`, but it seems like we can do a little better by not checking `pieces` length at all.
`Arguments` constructors are now unsafe. So the `format_args!` expansion now includes an `unsafe` block.
<details>
<summary>Local Bench Diff</summary>
```text
name before ns/iter after ns/iter diff ns/iter diff % speedup
fmt::write_str_macro1 22,967 19,718 -3,249 -14.15% x 1.16
fmt::write_str_macro2 35,527 32,654 -2,873 -8.09% x 1.09
fmt::write_str_macro_debug 571,953 575,973 4,020 0.70% x 0.99
fmt::write_str_ref 9,579 9,459 -120 -1.25% x 1.01
fmt::write_str_value 9,573 9,572 -1 -0.01% x 1.00
fmt::write_u128_max 176 173 -3 -1.70% x 1.02
fmt::write_u128_min 138 134 -4 -2.90% x 1.03
fmt::write_u64_max 139 136 -3 -2.16% x 1.02
fmt::write_u64_min 129 135 6 4.65% x 0.96
fmt::write_vec_macro1 24,401 22,273 -2,128 -8.72% x 1.10
fmt::write_vec_macro2 37,096 35,602 -1,494 -4.03% x 1.04
fmt::write_vec_macro_debug 588,291 589,575 1,284 0.22% x 1.00
fmt::write_vec_ref 9,568 9,732 164 1.71% x 0.98
fmt::write_vec_value 9,516 9,625 109 1.15% x 0.99
```
</details>
Previously, converting `&mut [T; N]` to `&[Cell<T>; N]` looks like this:
let array = &mut [1, 2, 3];
let cells: &[Cell<i32>; 3] = Cell::from_mut(&mut array[..])
.as_slice_of_cells()
.try_into()
.unwrap();
With this new helper method, it looks like this:
let array = &mut [1, 2, 3];
let cells: &[Cell<i32>; 3] = Cell::from_mut(array).as_array_of_cells();
Fix example in `Extend<(A, B)>` impl
After looking over the examples in my last PR (#85835) on doc.rust-lang.org/nightly I realized that the example didn't actually show what I wanted it to show 😅
So here's the better example
The libs-api team agrees to allow const_trait_impl to appear in the
standard library as long as stable code cannot be broken (they are
properly gated) this means if the compiler teams thinks it's okay, then
it's okay.
My priority on constifying would be:
1. Non-generic impls (e.g. Default) or generic impls with no
bounds
2. Generic functions with bounds (that use const impls)
3. Generic impls with bounds
4. Impls for traits with associated types
For people opening constification PRs: please cc me and/or oli-obk.
Uplift the invalid_atomic_ordering lint from clippy to rustc
This is mostly just a rebase of https://github.com/rust-lang/rust/pull/79654; I've copy/pasted the text from that PR below.
r? `@lcnr` since you reviewed the last one, but feel free to reassign.
---
This is an implementation of https://github.com/rust-lang/compiler-team/issues/390.
As mentioned, in general this turns an unconditional runtime panic into a (compile time) lint failure. It has no false positives, and the only false negatives I'm aware of are if `Ordering` isn't specified directly and is comes from an argument/constant/whatever.
As a result of it having no false positives, and the alternative always being strictly wrong, it's on as deny by default. This seems right.
In the [zulip stream](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/Uplift.20the.20.60invalid_atomic_ordering.60.20lint.20from.20clippy/near/218483957) `@joshtriplett` suggested that lang team should FCP this before landing it. Perhaps libs team cares too?
---
Some notes on the code for reviewers / others below
## Changes from clippy
The code is changed from [the implementation in clippy](68cf94f6a6/clippy_lints/src/atomic_ordering.rs) in the following ways:
1. Uses `Symbols` and `rustc_diagnostic_item`s instead of string literals.
- It's possible I should have just invoked Symbol::intern for some of these instead? Seems better to use symbol, but it did require adding several.
2. The functions are moved to static methods inside the lint struct, as a way to namespace them.
- There's a lot of other code in that file — which I picked as the location for this lint because `@jyn514` told me that seemed reasonable.
3. Supports unstable AtomicU128/AtomicI128.
- I did this because it was almost easier to support them than not — not supporting them would have (ideally) required finding a way not to give them a `rustc_diagnostic_item`, which would have complicated an already big macro.
- These don't have tests since I wasn't sure if/how I should make tests conditional on whether or not the target has the atomic... This is to a certain extent an issue of 64bit atomics too, but 128-bit atomics are much less common. Regardless, the existing tests should be *more* than thorough enough here.
4. Minor changes like:
- grammar tweaks ("loads cannot have `Release` **and** `AcqRel` ordering" => "loads cannot have `Release` **or** `AcqRel` ordering")
- function renames (`match_ordering_def_path` => `matches_ordering_def_path`),
- avoiding clippy-specific helper methods that don't exist in rustc_lint and didn't seem worth adding for this case (for example `cx.struct_span_lint` vs clippy's `span_lint_and_help` helper).
## Potential issues
(This is just about the code in this PR, not conceptual issues with the lint or anything)
1. I'm not sure if I should have used a diagnostic item for `Ordering` and its variants (I couldn't figure out how really, so if I should do this some pointers would be appreciated).
- It seems possible that failing to do this might possibly mean there are more cases this lint would miss, but I don't really know how `match_def_path` works and if it has any pitfalls like that, so maybe not.
2. I *think* I deprecated the lint in clippy (CC `@flip1995` who asked to be notified about clippy changes in the future in [this comment](https://github.com/rust-lang/rust/pull/75671#issuecomment-718731659)) but I'm not sure if I need to do anything else there.
- I'm kind of hoping CI will catch if I missed anything, since `x.py test src/tools/clippy` fails with a lot of errors with and without my changes (and is probably a nonsense command regardless). Running `cargo test` from src/tools/clippy also fails with unrelated errors that seem like refactorings that didnt update clippy? So, honestly no clue.
3. I wasn't sure if the description/example I gave good. Hopefully it is. The example is less thorough than the one from clippy here: https://rust-lang.github.io/rust-clippy/master/index.html#invalid_atomic_ordering. Let me know if/how I should change it if it needs changing.
4. It pulls in the `if_chain` crate. This crate was already used in clippy, and seems like it's used elsewhere in rustc, but I'm willing to rewrite it to not use this if needed (I'd prefer not to, all things being equal).
- Deprecate clippy::invalid_atomic_ordering
- Use rustc_diagnostic_item for the orderings in the invalid_atomic_ordering lint
- Reduce code duplication
- Give up on making enum variants diagnostic items and just look for
`Ordering` instead
I ran into tons of trouble with this because apparently the change to
store HIR attrs in a side table also gave the DefIds of the
constructor instead of the variant itself. So I had to change
`matches_ordering` to also check the grandparent of the defid as well.
- Rename `atomic_ordering_x` symbols to just the name of the variant
- Fix typos in checks - there were a few places that said "may not be
Release" in the diagnostic but actually checked for SeqCst in the lint.
- Make constant items const
- Use fewer diagnostic items
- Only look at arguments after making sure the method matches
This prevents an ICE when there aren't enough arguments.
- Ignore trait methods
- Only check Ctors instead of going through `qpath_res`
The functions take values, so this couldn't ever be anything else.
- Add if_chain to allowed dependencies
- Fix grammar
- Remove unnecessary allow
Test and fix `size_hint` for slice’s [r]split* iterators
Adds extensive test (of `size_hint`) for all the _[r]split*_ iterators.
Fixes `size_hint` upper bound for _split_inclusive*_ iterators which was one higher than necessary for non-empty slices.
Fixes `size_hint` lower bound for _[r]splitn*_ iterators when _n == 0_, which was one too high.
**Lower bound being one too high was a logic error, violating the correctness condition of `size_hint`.**
_Edit:_ I’ve opened an issue for that bug, so this PR fixes#87978
Implement `black_box` using intrinsic
Introduce `black_box` intrinsic, as suggested in https://github.com/rust-lang/rust/pull/87590#discussion_r680468700.
This is still codegenned as empty inline assembly for LLVM. For MIR interpretation and cranelift it's treated as identity.
cc `@Amanieu` as this is related to inline assembly
cc `@bjorn3` for rustc_codegen_cranelift changes
cc `@RalfJung` as this affects MIRI
r? `@nagisa` I suppose
Adds extensive test for all the [r]split* iterators.
Fixes size_hint upper bound for split_inclusive* iterators which was one higher than necessary for non-empty slices.
Fixes size_hint lower bound for [r]splitn* iterators when n==0, which was one too high.
The new implementation allows some `memcpy`s to be optimized away,
so the uninit value in ui/sanitize/memory.rs is constructed directly
onto the return place. Therefore the sanitizer now says that the
value is allocated by `main` rather than `random`.
