This new special case is simpler than the old special case because it
only is used when `dist == 1`. But that's still enough to cover ~98% of
cases. This results in equivalent performance to the old special case,
and identical behaviour as the general case.
The general case at the bottom of `look_ahead` is slow, because it
clones the token cursor. Above it there is a special case for
performance that is hit most of the time and avoids the cloning.
Unfortunately, its behaviour differs from the general case in two ways.
- When within a pair of delimiters, if you look any distance past the
closing delimiter you get the closing delimiter instead of what comes
after the closing delimiter.
- It uses `tree_cursor.look_ahead(dist - 1)` which totally confuses
tokens with token trees. This means that only the first token in a
token tree will be seen. E.g. in a sequence like `{ a }` the `a` and
`}` will be skipped over. Bad!
It's likely that these differences weren't noticed before now because
the use of `look_ahead` in the parser is limited to small distances and
relatively few contexts.
Removing the special case causes slowdowns up of to 2% on a range of
benchmarks. The next commit will add a new, correct special case to
regain that lost performance.
Currently the second element is a `Vec<(FlatToken, Spacing)>`. But the
vector always has zero or one elements, and the `FlatToken` is always
`FlatToken::AttrTarget` (which contains an `AttributesData`), and the
spacing is always `Alone`. So we can simplify it to
`Option<AttributesData>`.
An assertion in `to_attr_token_stream` can can also be removed, because
`new_tokens.len()` was always 0 or 1, which means than `range.len()`
is always greater than or equal to it, because `range.is_empty()` is
always false (as per the earlier assertion).
And update the comment. Clearly the return type of this function was
changed at some point in the past, but its name and comment weren't
updated to match.
The number of source code bytes can't exceed a `u32`'s range, so a token
position also can't. This reduces the size of `Parser` and
`LazyAttrTokenStreamImpl` by eight bytes each.
Move binder and polarity parsing into `parse_generic_ty_bound`
Let's pull out the parts of #127054 which just:
1. Make the parsing code less confusing
2. Fix `?use<>` (to correctly be denied)
3. Improve `T: for<'a> 'a` diagnostics
This should have no user-facing effects on stable parsing.
r? fmease
It currently goes one token too far.
Example: line 259 of `tests/ui/abi/compatibility.rs`:
```
test_abi_compatible!(fn_fn, fn(), fn(i32) -> i32);
```
This commit changes the span for the second element from `fn(),` to
`fn()`, i.e. removes the extraneous comma.
coverage: Overhaul validation of the `#[coverage(..)]` attribute
This PR makes sweeping changes to how the (currently-unstable) coverage attribute is validated:
- Multiple coverage attributes on the same item/expression are now treated as an error.
- The attribute must always be `#[coverage(off)]` or `#[coverage(on)]`, and the error messages for this are more consistent.
- A trailing comma is still allowed after off/on, since that's part of the normal attribute syntax.
- Some places that silently ignored a coverage attribute now produce an error instead.
- These cases were all clearly bugs.
- Some places that ignored a coverage attribute (with a warning) now produce an error instead.
- These were originally added as lints, but I don't think it makes much sense to knowingly allow new attributes to be used in meaningless places.
- Some of these errors might soon disappear, if it's easy to extend recursive coverage attributes to things like modules and impl blocks.
---
One of the goals of this PR is to lay a more solid foundation for making the coverage attribute recursive, so that it applies to all nested functions/closures instead of just the one it is directly attached to.
Fixes#126658.
This PR incorporates #126659, which adds more tests for validation of the coverage attribute.
`@rustbot` label +A-code-coverage
Special case when a code line only has multiline span starts
Minimize multline span overlap when there are multiple of them starting on the same line:
```
3 | X0 Y0 Z0
| _____^ - -
| | _______| |
| || _________|
4 | ||| X1 Y1 Z1
5 | ||| X2 Y2 Z2
| |||____^__-__- `Z` label
| ||_____|__|
| |______| `Y` is a good letter too
| `X` is a good letter
```
Add hard error and migration lint for unsafe attrs
More implementation work for https://github.com/rust-lang/rust/issues/123757
This adds the migration lint for unsafe attributes, as well as making it a hard error in Rust 2024.
Merge `PatParam`/`PatWithOr`, and `Expr`/`Expr2021`, for a few reasons.
- It's conceptually nice, because the two pattern kinds and the two
expression kinds are very similar.
- With expressions in particular, there are several places where both
expression kinds get the same treatment.
- It removes one unreachable match arm.
- Most importantly, for #124141 I will need to introduce a new type
`MetaVarKind` that is very similar to `NonterminalKind`, but records a
couple of extra fields for expression metavars. It's nicer to have a
single `MetaVarKind::Expr` expression variant to hold those extra
fields instead of duplicating them across two variants
`MetaVarKind::{Expr,Expr2021}`. And then it makes sense for patterns
to be treated the same way, and for `NonterminalKind` to also be
treated the same way.
I also clarified the comments, because I have long found them a little
hard to understand.
`StaticForeignItem` and `StaticItem` are the same
The struct `StaticItem` and `StaticForeignItem` are the same, so remove `StaticForeignItem`. Having them be separate is unique to `static` items -- unlike `ForeignItemKind::{Fn,TyAlias}`, which use the normal AST item.
r? ``@spastorino`` or ``@oli-obk``
Make edition dependent `:expr` macro fragment act like the edition-dependent `:pat` fragment does
Parse the `:expr` fragment as `:expr_2021` in editions <=2021, and as `:expr` in edition 2024. This is similar to how we parse `:pat` as `:pat_param` in edition <=2018 and `:pat_with_or` in >=2021, and means we can get rid of a span dependency from `nonterminal_may_begin_with`.
Specifically, this fixes a theoretical regression since the `expr_2021` macro fragment previously would allow `const {}` if the *caller* is edition 2024. This is inconsistent with the way that the `pat` macro fragment was upgraded, and also leads to surprising behavior when a macro *caller* crate upgrades to edtion 2024, since they may have parsing changes that they never asked for (with no way of opting out of it).
This PR also allows using `expr_2021` in all editions. Why was this was disallowed in the first place? It's purely additive, and also it's still feature gated?
r? ```@fmease``` ```@eholk``` cc ```@vincenzopalazzo```
cc #123865
Tracking:
- https://github.com/rust-lang/rust/issues/123742
Improve conflict marker recovery
<!--
If this PR is related to an unstable feature or an otherwise tracked effort,
please link to the relevant tracking issue here. If you don't know of a related
tracking issue or there are none, feel free to ignore this.
This PR will get automatically assigned to a reviewer. In case you would like
a specific user to review your work, you can assign it to them by using
r? <reviewer name>
-->
closes#113826
r? ```@estebank``` since you reviewed #115413
cc: ```@rben01``` since you opened up the issue in the first place
Properly gate `safe` keyword in pre-expansion
This PR gates `safe` keyword in pre-expansion contexts. Should mitigate the fallout of https://github.com/rust-lang/rust/issues/126755, which is that `safe` is now usable on beta lol.
r? `@spastorino` or `@oli-obk`
cc #124482 tracking #123743
Clean up some comments near `use` declarations
#125443 will reformat all `use` declarations in the repository. There are a few edge cases involving comments on `use` declarations that require care. This PR cleans up some clumsy comment cases, taking us a step closer to #125443 being able to merge.
r? ``@lqd``
We currently use `can_begin_literal_maybe_minus` in a couple of places
where only string literals are allowed. This commit introduces a
more specific function, which makes things clearer. It doesn't change
behaviour because the two functions affected (`is_unsafe_foreign_mod`
and `check_keyword_case`) are always followed by a call to `parse_abi`,
which checks again for a string literal.
It's clearer this way, because the `Interpolated` cases in
`can_begin_const_arg` and `is_pat_range_end_start` are more permissive
than the `Interpolated` cases in `can_begin_literal_maybe_minus`.
Fix duplicated attributes on nonterminal expressions
This PR fixes a long-standing bug (#86055) whereby expression attributes can be duplicated when expanded through declarative macros.
First, consider how items are parsed in declarative macros:
```
Items:
- parse_nonterminal
- parse_item(ForceCollect::Yes)
- parse_item_
- attrs = parse_outer_attributes
- parse_item_common(attrs)
- maybe_whole!
- collect_tokens_trailing_token
```
The important thing is that the parsing of outer attributes is outside token collection, so the item's tokens don't include the attributes. This is how it's supposed to be.
Now consider how expression are parsed in declarative macros:
```
Exprs:
- parse_nonterminal
- parse_expr_force_collect
- collect_tokens_no_attrs
- collect_tokens_trailing_token
- parse_expr
- parse_expr_res(None)
- parse_expr_assoc_with
- parse_expr_prefix
- parse_or_use_outer_attributes
- parse_expr_dot_or_call
```
The important thing is that the parsing of outer attributes is inside token collection, so the the expr's tokens do include the attributes, i.e. in `AttributesData::tokens`.
This PR fixes the bug by rearranging expression parsing to that outer attribute parsing happens outside of token collection. This requires a number of small refactorings because expression parsing is somewhat complicated. While doing so the PR makes the code a bit cleaner and simpler, by eliminating `parse_or_use_outer_attributes` and `Option<AttrWrapper>` arguments (in favour of the simpler `parse_outer_attributes` and `AttrWrapper` arguments), and simplifying `LhsExpr`.
r? `@petrochenkov`
It now parses outer attributes before collecting tokens. This avoids the
problem where the outer attribute tokens were being stored twice -- for
the attribute tokesn, and also for the expression tokens.
Fixes#86055.
Combine `NotYetParsed` and `AttributesParsed` into a single variant,
because (a) that reflects the structure of the code that consumes
`LhsExpr`, and (b) because that variant will have the `Option` removed
in a later commit.
The `Option<AttrWrapper>` one maps to the first two variants, and the
`P<Expr>` one maps to the third. Weird. The code is shorter and clearer
without them.
