We currently provide wrong suggestions and unhelpful errors on closure
bodies with braces missing. For example, given the following code:
```
fn main() {
let _x = Box::new(|x|x+1;);
}
```
the current output is like this:
```
error: expected expression, found `)`
--> ./main.rs:2:30
|
2 | let _x = Box::new(|x|x+1;);
| ^ expected expression
error: closure bodies that contain statements must be surrounded by braces
--> ./main.rs:2:25
|
2 | let _x = Box::new(|x|x+1;);
| ^
3 | }
| ^
|
...
help: try adding braces
|
2 ~ let _x = Box::new(|x| {x+1;);
3 ~ }}
...
error: expected `;`, found `}`
--> ./main.rs:2:32
|
2 | let _x = Box::new(|x|x+1;);
| ^ help: add `;` here
3 | }
| - unexpected token
error: aborting due to 3 previous errors
```
This commit allows outputting correct suggestions and errors. The above
code would output like this:
```
error: closure bodies that contain statements must be surrounded by braces
--> ./main.rs:2:25
|
2 | let _x = Box::new(|x|x+1;);
| ^ ^
|
note: statement found outside of a block
--> ./main.rs:2:29
|
2 | let _x = Box::new(|x|x+1;);
| ---^ this `;` turns the preceding closure into a statement
| |
| this expression is a statement because of the trailing semicolon
note: the closure body may be incorrectly delimited
--> ./main.rs:2:23
|
2 | let _x = Box::new(|x|x+1;);
| ^^^^^^ - ...but likely you meant the closure to end here
| |
| this is the parsed closure...
help: try adding braces
|
2 | let _x = Box::new(|x| {x+1;});
| + +
error: aborting due to previous error
```
Lint dead code in closures and generators
Fixes#108296
I think this might be a potentially breaking change, but restores the behaviour of pre-1.64.
`@rustbot` label +A-lint
Don't delay `ReError` bug during lexical region resolve
Lexical region resolution returns a list of `RegionResolutionError` which don't necessarily correspond to diagnostics being emitted. The compiler may, validly, throw away these resolution errors and do something else. Therefore it's not valid to use `ReError` during lifetime resolution, since we may actually be on a totally fine compilation path.
For example, the `implied_bounds_entailment` lint runs region resolution twice, and only emits an error if it fails both times. If we delay a bug and create a `ReError` during this first run, then we will ICE.
Fixes#108170
----
Side-note: this is conceptually equivalent to how we can't necessarily delay bugs or create `ty::Error` during trait solving/fulfillment, since the compiler is allowed to throw away these fulfillment errors to do other things. It's only once we actually emit an error (`report_region_errors` / `report_fulfillment_errors`)
Remove type-traversal trait aliases
#107924 moved the type traversal (folding and visiting) traits into the type library, but created trait aliases in `rustc_middle` to minimise both the API churn for trait consumers and the arising boilerplate. As mentioned in that PR, an alternative approach of defining subtraits with blanket implementations of the respective supertraits was also considered at that time but was ruled out as not adding much value.
Unfortunately, it has since emerged that rust-analyzer has difficulty with these trait aliases at present, resulting in a degraded contributor experience (see the recent [r-a has become useless](https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/r-a.20has.20become.20useless) topic on the #t-compiler/help Zulip stream).
This PR removes the trait aliases, and accordingly the underlying type library traits are now used directly; they are parameterised by `TyCtxt<'tcx>` rather than just the `'tcx` lifetime, and imports have been updated to reflect the fact that the trait aliases' explicitly named traits are no longer automatically brought into scope. These changes also roll-back the (no-longer required) workarounds to #107747 that were made in b409329c62.
Since this PR is just a find+replace together with the changes necessary for compilation & tidy to pass, it's currently just one mega-commit. Let me know if you'd like it broken up.
r? `@oli-obk`
errors: generate typed identifiers in each crate
Instead of loading the Fluent resources for every crate in `rustc_error_messages`, each crate generates typed identifiers for its own diagnostics and creates a static which are pulled together in the `rustc_driver` crate and provided to the diagnostic emitter.
There are advantages and disadvantages to this change..
#### Advantages
- Changing a diagnostic now only recompiles the crate for that diagnostic and those crates that depend on it, rather than `rustc_error_messages` and all crates thereafter.
- This approach can be used to support first-party crates that want to supply translatable diagnostics (e.g. `rust-lang/thorin` in https://github.com/rust-lang/rust/pull/102612#discussion_r985372582, cc `@JhonnyBillM)`
- We can extend this a little so that tools built using rustc internals (like clippy or rustdoc) can add their own diagnostic resources (much more easily than those resources needing to be available to `rustc_error_messages`)
#### Disadvantages
- Crates can only refer to the diagnostic messages defined in the current crate (or those from dependencies), rather than all diagnostic messages.
- `rustc_driver` (or some other crate we create for this purpose) has to directly depend on *everything* that has error messages.
- It already transitively depended on all these crates.
#### Pending work
- [x] I don't know how to make `rustc_codegen_gcc`'s translated diagnostics work with this approach - because `rustc_driver` can't depend on that crate and so can't get its resources to provide to the diagnostic emission. I don't really know how the alternative codegen backends are actually wired up to the compiler at all.
- [x] Update `triagebot.toml` to track the moved FTL files.
r? `@compiler-errors`
cc #100717
Fix overlapping spans in removing extra arguments
Fixes#108225
Each span is already extended to include the previous comma, so extending to the *next* comma is unecessary and causes an ICE with assertions on.
``@rustbot`` label +A-diagnostics
Convert a hard-warning about named static lifetimes into lint "unused_lifetimes"
Fixes https://github.com/rust-lang/rust/issues/96956.
Some changes are ported from https://github.com/rust-lang/rust/pull/98079, thanks to jeremydavis519.
r? `@estebank` `@petrochenkov`
Any feedback is appreciated!
## Actions
- [x] resolve conflicts
- [x] fix build
- [x] address review comments in last pr
- [x] update tests
Extend `CodegenBackend` trait with a function returning the translation
resources from the codegen backend, which can be added to the complete
list of resources provided to the emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
`run-make/translation` had some targets that weren't listed in `all` and
thus weren't being tested - the behaviour that should have been being
tested was basically correct fortunately.
Signed-off-by: David Wood <david.wood@huawei.com>
Instead of loading the Fluent resources for every crate in
`rustc_error_messages`, each crate generates typed identifiers for its
own diagnostics and creates a static which are pulled together in the
`rustc_driver` crate and provided to the diagnostic emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
Define the `named_static_lifetimes` lint
This lint will replace the existing hard-warning.
Replace the named static lifetime hard-warning with the new lint
Update the UI tests for the `named_static_lifetimes` lint
Remove the direct dependency on `rustc_lint_defs`
fix build
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
use "UNUSED_LIFETIMES" instead
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
update 1 test and fix typo
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
update tests
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
fix tests: add extra blank line
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
Use DefKind to give more item kind information during BindingObligation note
The current label says "required by a bound in this". When I see that label, my immediate impression is "this... **what**?". It feels like it was cut short.
Alternative to this would be saying "in this item", but adding the item kind is strictly more informational and adds very little overhead to the existing error presentation.
Make hidden type registration opt-in, so that each site can be reviewed on its own and we have the right defaults for trait solvers
r? `@lcnr`
pulled out of https://github.com/rust-lang/rust/pull/107891 as it is the uncontroversial part
Move `Fn*` traits malformedness protections to typeck
I found it strange that we were doing a custom well-formedness check just for the `Fn*` traits' `call_*` fn items. My understanding from the git history is that this is just to avoid ICEs later on in typeck.
Well, that well-formedness check isn't even implemented correctly for `FnOnce::call_once`, or `FnMut::call_mut` for that matter. Instead, this PR just makes the typeck checks more robust, and leaves it up to the call-site to report errors when lang items are implemented in funny ways.
This coincidentally fixes another ICE where a the `Add` lang item is implemented with a `add` item that's a const instead of a method.
Add a test for default trait method with RPITITs
This didn't work in #107013, but now that #108203 has landed, let's make sure we don't regress it.
r? types
Name placeholder in some region errors
Also don't print `ReVar` or `ReLateBound` as debug... these error messages are super uncommon anyways, but in the case they do trigger, let's be slightly more helpful.
remove unstable `pick_stable_methods_before_any_unstable` flag
This flag was only added in #90329 in case there was any issue with the impl so that it would be easy to tell nightly users to use the flag to disable the new logic to fix their code. It's now been enabled for two years and also I can't find any issues corresponding to this new functionality? This flag made it way harder to understand how this code works so it would be nice to remove it and simplify what's going on.
cc `@nbdd0121`
r? `@oli-obk`
lint: don't suggest MaybeUninit::assume_init for uninhabited types
Creating a zeroed uninhabited type such as `!` or an empty enum with `mem::zeroed()` (or transmuting `()` to `!`) currently triggers this lint:
```rs
warning: the type `!` does not permit zero-initialization
--> test.rs:5:23
|
5 | let _val: ! = mem::zeroed();
| ^^^^^^^^^^^^^
| |
| this code causes undefined behavior when executed
| help: use `MaybeUninit<T>` instead, and only call `assume_init` after initialization is done
|
= note: the `!` type has no valid value
```
The `MaybeUninit` suggestion in the help message seems confusing/useless for uninhabited types, as such a type cannot be fully initialized in the first place (as the note implies).
This PR limits this help message to inhabited types which can be initialized
Miri: basic dyn* support
As usual I am very unsure about the dynamic dispatch stuff, but it passes even the `Pin<&mut dyn* Trait>` test so that is something.
TBH I think it was a mistake to make `dyn Trait` and `dyn* Trait` part of the same `TyKind` variant. Almost everywhere in Miri this lead to the wrong default behavior, resulting in strange ICEs instead of nice "unimplemented" messages. The two types describe pretty different runtime data layout after all.
Strangely I did not need to do the equivalent of [this diff](https://github.com/rust-lang/rust/pull/106532#discussion_r1087095963) in Miri. Maybe that is because the unsizing logic matches on `ty::Dynamic(.., ty::Dyn)` already? In `unsized_info` I don't think the `target_dyn_kind` can be `DynStar`, since then it wouldn't be unsized!
r? `@oli-obk` Cc `@eholk` (dyn-star) https://github.com/rust-lang/rust/issues/102425
Refine error span for trait error into borrowed expression
Extends the error span refinement in #106477 to drill into borrowed expressions just like tuples/struct/enum literals. For example,
```rs
trait Fancy {}
trait Good {}
impl <'a, T> Fancy for &'a T where T: Good {}
impl <S> Good for Option<S> where S: Iterator {}
fn want_fancy<F>(f: F) where F: Fancy {}
fn example() {
want_fancy(&Some(5));
// (BEFORE) ^^^^^^^^ `{integer}` is not an iterator
// (AFTER) ^ `{integer}` is not an iterator
}
```
Existing heuristics try to find the right part of the expression to "point at"; current heuristics look at e.g. struct constructors and tuples. This PR adds a new check for borrowed expressions when looking into a borrowed type.
