Currently, any higher-ranked region errors involving opaque types
fall back to a generic "higher-ranked subtype error" message when
run under NLL. This PR adds better error message handling for this
case, giving us the same kinds of error messages that we currently
get without NLL:
```
error: implementation of `MyTrait` is not general enough
--> $DIR/opaque-hrtb.rs:12:13
|
LL | fn foo() -> impl for<'a> MyTrait<&'a str> {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ implementation of `MyTrait` is not general enough
|
= note: `impl MyTrait<&'2 str>` must implement `MyTrait<&'1 str>`, for any lifetime `'1`...
= note: ...but it actually implements `MyTrait<&'2 str>`, for some specific lifetime `'2`
error: aborting due to previous error
```
To accomplish this, several different refactoring needed to be made:
* We now have a dedicated `InstantiateOpaqueType` struct which
implements `TypeOp`. This is used to invoke `instantiate_opaque_types`
during MIR type checking.
* `TypeOp` is refactored to pass around a `MirBorrowckCtxt`, which is
needed to report opaque type region errors.
* We no longer assume that all `TypeOp`s correspond to canonicalized
queries. This allows us to properly handle opaque type instantiation
(which does not occur in a query) as a `TypeOp`.
A new `ErrorInfo` associated type is used to determine what
additional information is used during higher-ranked region error
handling.
* The body of `try_extract_error_from_fulfill_cx`
has been moved out to a new function `try_extract_error_from_region_constraints`.
This allows us to re-use the same error reporting code between
canonicalized queries (which can extract region constraints directly
from a fresh `InferCtxt`) and opaque type handling (which needs to take
region constraints from the pre-existing `InferCtxt` that we use
throughout MIR borrow checking).
Lazy type-alias-impl-trait
Previously opaque types were processed by
1. replacing all mentions of them with inference variables
2. memorizing these inference variables in a side-table
3. at the end of typeck, resolve the inference variables in the side table and use the resolved type as the hidden type of the opaque type
This worked okayish for `impl Trait` in return position, but required lots of roundabout type inference hacks and processing.
This PR instead stops this process of replacing opaque types with inference variables, and just keeps the opaque types around.
Whenever an opaque type `O` is compared with another type `T`, we make the comparison succeed and record `T` as the hidden type. If `O` is compared to `U` while there is a recorded hidden type for it, we grab the recorded type (`T`) and compare that against `U`. This makes implementing
* https://github.com/rust-lang/rfcs/pull/2515
much simpler (previous attempts on the inference based scheme were very prone to ICEs and general misbehaviour that was not explainable except by random implementation defined oddities).
r? `@nikomatsakis`
fixes#93411fixes#88236
[borrowck] Fix help on mutating &self in async fns
Previously, when rustc was provided an async function that tried to
mutate through a shared reference to an implicit self (as shown in the
ui test), rustc would suggest modifying the parameter signature
to `&mut` + the fully qualified name of the ty (in the case of the repro
`S`). If a user modified their code to match the suggestion, the
compiler would not accept it.
This commit modifies the suggestion so that when rustc is provided the
ui test that is also attached in this commit, it suggests (correctly)
`&mut self`. We try to be careful about distinguishing between implicit
and explicit self annotations, since the latter seem to be handled
correctly already.
This is my first PR here so I'm pretty sure I probably missed something/could use better terminology. I also didn't try to make the match exhaustive since implicit self is the only real special case that I need to handle (that I'm aware of), and I'm pretty sure there's a cleaner way to do this so any advice would be greatly appreciated! (I'm also not terribly confident about how I wrote the ui tests)
here is your cc as requested `@compiler-errors`
This is an attempt to fix#93093
by using an opaque type obligation to bubble up comparisons between opaque types and other types
Also uses proper obligation causes so that the body id works, because out of some reason nll uses body ids for logic instead of just diagnostics.
Store a `Symbol` instead of an `Ident` in `AssocItem`
This is the same idea as #92533, but for `AssocItem` instead
of `VariantDef`/`FieldDef`.
With this change, we no longer have any uses of
`#[stable_hasher(project(...))]`
Remove ordering traits from `OutlivesConstraint`
In two cases where this ordering was used, I've replaced the sorting to use a key that does not rely on `DefId` being `Ord`. This is part of #90317. If I understand correctly, whether this is correct depends on whether the `RegionVid`s are tracked during incremental compilation. But I might be mistaken in this approach. cc `@cjgillot`
Previously, when rustc was provided an async function that tried to
mutate through a shared reference to an implicit self (as shown in the
ui test), rustc would suggest modifying the parameter signature
to `&mut` + the fully qualified name of the ty (in the case of the repro
`S`). If a user modified their code to match the suggestion, the
compiler would not accept it.
This commit modifies the suggestion so that when rustc is provided the
ui test that is also attached in this commit, it suggests (correctly)
`&mut self`. We try to be careful about distinguishing between implicit
and explicit self annotations, since the latter seem to be handled
correctly already.
Fixesrust-lang/rust#93093
Ensure that early-bound function lifetimes are always 'local'
During borrowchecking, we treat any free (early-bound) regions on
the 'defining type' as `RegionClassification::External`. According
to the doc comments, we should only have 'external' regions when
checking a closure/generator.
However, a plain function can also have some if its regions
be considered 'early bound' - this occurs when the region is
constrained by an argument, appears in a `where` clause, or
in an opaque type. This was causing us to incorrectly mark these
regions as 'external', which caused some diagnostic code
to act as if we were referring to a 'parent' region from inside
a closure.
This PR marks all instantiated region variables as 'local'
when we're borrow-checking something other than a
closure/generator/inline-const.
Update some rustc dependencies to deduplicate them
This PR updates `rand` and `itertools` in rustc (not the whole workspace) in order to deduplicate them (and hopefully slightly improve compile times).
~~Currently, `object` is still duplicated, but https://github.com/rust-lang/thorin/pull/15 and updating `thorin` in the future will remove the use of version 0.27.~~ Update: Thorin 0.2 has now been released, and this PR updates `rustc_codegen_ssa` to use it and deduplicate the `object` crate.
There's a final tiny rustc dependency, `cfg-if`, which will be left: as both versions 0.1.x and 1.0 looked to be heavily depended on, they will require a few cascading updates to be removed.
This is the same idea as #92533, but for `AssocItem` instead
of `VariantDef`/`FieldDef`.
With this change, we no longer have any uses of
`#[stable_hasher(project(...))]`
In two cases where this ordering was used, I've replaced the sorting
to use a key that does not include DefId. I'm not sure this is correct
in terms of our goals from #90317, or otherwise.
ProjectionPredicate should be able to handle both associated types and consts so this adds the
first step of that. It mainly just pipes types all the way down, not entirely sure how to handle
consts, but hopefully that'll come with time.
Remove deprecated LLVM-style inline assembly
The `llvm_asm!` was deprecated back in #87590 1.56.0, with intention to remove
it once `asm!` was stabilized, which already happened in #91728 1.59.0. Now it
is time to remove `llvm_asm!` to avoid continued maintenance cost.
Closes#70173.
Closes#92794.
Closes#87612.
Closes#82065.
cc `@rust-lang/wg-inline-asm`
r? `@Amanieu`
Add `#[track_caller]` to `mirbug`
When a "'no errors encountered even though `delay_span_bug` issued" error results from the `mirbug` function, the file location information points to the `mirbug` function itself, rather than its caller. This doesn't make sense, since the caller is the real source of the bug. Adding `#[track_caller]` will produce diagnostics that are more useful to anyone fixing the ICE.
Closure capture cleanup & refactor
Follow up of #89648
Each commit is self-contained and the rationale/changes are documented in the commit message, so it's advisable to review commit by commit.
The code is significantly cleaner (at least IMO), but that could have some perf implication, so I'd suggest a perf run.
r? `@wesleywiser`
cc `@arora-aman`
The field is also renamed from `ident` to `name. In most cases,
we don't actually need the `Span`. A new `ident` method is added
to `VariantDef` and `FieldDef`, which constructs the full `Ident`
using `tcx.def_ident_span()`. This method is used in the cases
where we actually need an `Ident`.
This makes incremental compilation properly track changes
to the `Span`, without all of the invalidations caused by storing
a `Span` directly via an `Ident`.
Region info is completely unnecessary for upvar capture kind computation
and is only needed to create the final upvar tuple ty. Doing so makes
creation of UpvarCapture very cheap and expose further cleanup opportunity.
Remove `NullOp::Box`
Follow up of #89030 and MCP rust-lang/compiler-team#460.
~1 month later nothing seems to be broken, apart from a small regression that #89332 (1aac85bb716c09304b313d69d30d74fe7e8e1a8e) shows could be regained by remvoing the diverging path, so it shall be safe to continue and remove `NullOp::Box` completely.
r? `@jonas-schievink`
`@rustbot` label T-compiler
During borrowchecking, we treat any free (early-bound) regions on
the 'defining type' as `RegionClassification::External`. According
to the doc comments, we should only have 'external' regions when
checking a closure/generator.
However, a plain function can also have some if its regions
be considered 'early bound' - this occurs when the region is
constrained by an argument, appears in a `where` clause, or
in an opaque type. This was causing us to incorrectly mark these
regions as 'external', which caused some diagnostic code
to act as if we were referring to a 'parent' region from inside
a closure.
This PR marks all instantiated region variables as 'local'
when we're borrow-checking something other than a
closure/generator/inline-const.
Region inference contains several bitsets which are filled with large intervals
representing liveness. These can cause excessive memory usage, and are
relatively slow when growing to large sizes compared to the IntervalSet.
Instead of special-casing mutable pointers/references, we
now support general generic types (currently, we handle
`ty::Ref`, `ty::RawPtr`, and `ty::Adt`)
When a `ty::Adt` is involved, we show an additional note
explaining which of the type's generic parameters is
invariant (e.g. the `T` in `Cell<T>`). Currently, we don't
explain *why* a particular generic parameter ends up becoming
invariant. In the general case, this could require printing
a long 'backtrace' of types, so doing this would be
more suitable for a follow-up PR.
We still only handle the case where our variance switches
to `ty::Invariant`.
The `AggregateKind` enum ends up in the final mir `Body`. Currently,
any changes to `AdtDef` (regardless of how significant they are)
will legitimately cause the overall result of `optimized_mir` to change,
invalidating any codegen re-use involving that mir.
This will get worse once we start hashing the `Span` inside `FieldDef`
(which is itself contained in `AdtDef`).
To try to reduce these kinds of invalidations, this commit changes
`AggregateKind::Adt` to store just the `DefId`, instead of the full
`AdtDef`. This allows the result of `optimized_mir` to be unchanged
if the `AdtDef` changes in a way that doesn't actually affect any
of the MIR we build.
Remove `SymbolStr`
This was originally proposed in https://github.com/rust-lang/rust/pull/74554#discussion_r466203544. As well as removing the icky `SymbolStr` type, it allows the removal of a lot of `&` and `*` occurrences.
Best reviewed one commit at a time.
r? `@oli-obk`
Point at capture points for non-`'static` reference crossing a `yield` point
```
error[E0759]: `self` has an anonymous lifetime `'_` but it needs to satisfy a `'static` lifetime requirement
--> $DIR/issue-72312.rs:10:24
|
LL | pub async fn start(&self) {
| ^^^^^ this data with an anonymous lifetime `'_`...
...
LL | require_static(async move {
| -------------- ...is required to live as long as `'static` here...
LL | &self;
| ----- ...and is captured here
|
note: `'static` lifetime requirement introduced by this trait bound
--> $DIR/issue-72312.rs:2:22
|
LL | fn require_static<T: 'static>(val: T) -> T {
| ^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0759`.
```
Fix#72312.
In Rust, nesting method calls with both require `&mut` access to `self`
produces a borrow-check error:
error[E0499]: cannot borrow `*self` as mutable more than once at a time
--> src/lib.rs:7:14
|
7 | self.foo(self.bar());
| ---------^^^^^^^^^^-
| | | |
| | | second mutable borrow occurs here
| | first borrow later used by call
| first mutable borrow occurs here
That's because Rust has a left-to-right evaluation order, and the method
receiver is passed first. Thus, the argument to the method cannot then
mutate `self`.
There's an easy solution to this error: just extract a local variable
for the inner argument:
let tmp = self.bar();
self.foo(tmp);
However, the error doesn't give any suggestion of how to solve the
problem. As a result, new users may assume that it's impossible to
express their code correctly and get stuck.
This commit adds a (non-structured) suggestion to extract a local
variable for the inner argument to solve the error. The suggestion uses
heuristics that eliminate most false positives, though there are a few
false negatives (cases where the suggestion should be emitted but is
not). Those other cases can be implemented in a future change.
```
error[E0759]: `self` has an anonymous lifetime `'_` but it needs to satisfy a `'static` lifetime requirement
--> $DIR/issue-72312.rs:10:24
|
LL | pub async fn start(&self) {
| ^^^^^ this data with an anonymous lifetime `'_`...
...
LL | require_static(async move {
| -------------- ...is required to live as long as `'static` here...
LL | &self;
| ----- ...and is captured here
|
note: `'static` lifetime requirement introduced by this trait bound
--> $DIR/issue-72312.rs:2:22
|
LL | fn require_static<T: 'static>(val: T) -> T {
| ^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0759`.
```
Fix#72312.
Fix ICE when `yield`ing in function returning `impl Trait`
Change an assert to a `delay_span_bug` and remove an unwrap, that should fix it.
Fixes#91477
Cleanup: Eliminate ConstnessAnd
This is almost a behaviour-free change and purely a refactoring. "almost" because we appear to be using the wrong ParamEnv somewhere already, and this is now exposed by failing a test using the unstable `~const` feature.
We most definitely need to review all `without_const` and at some point should probably get rid of many of them by using `TraitPredicate` instead of `TraitRef`.
This is a continuation of https://github.com/rust-lang/rust/pull/90274.
r? `@oli-obk`
cc `@spastorino` `@ecstatic-morse`
Optimize live point computation
This refactors the live-point computation to lower per-MIR-instruction costs by operating on a largely per-block level. This doesn't fundamentally change the number of operations necessary, but it greatly improves the practical performance by aggregating bit manipulation into ranges rather than single-bit; this scales much better with larger blocks.
On the benchmark provided in #90445, with 100,000 array elements, walltime for a check build is improved from 143 seconds to 15.
I consider the tiny losses here acceptable given the many small wins on real world benchmarks and large wins on stress tests. The new code scales much better, but on some subset of inputs the slightly higher constant overheads decrease performance somewhat. Overall though, this is expected to be a big win for pathological cases (as illustrated by the test case motivating this work) and largely not material for non-pathological cases. I consider the new code somewhat easier to follow, too.
Type inference for inline consts
Fixes#78132Fixes#78174Fixes#81857Fixes#89964
Perform type checking/inference of inline consts in the same context as the outer def, similar to what is currently done to closure.
Doing so would require `closure_base_def_id` of the inline const to return the outer def, and since `closure_base_def_id` can be called on non-local crate (and thus have no HIR available), a new `DefKind` is created for inline consts.
The type of the generated anon const can capture lifetime of outer def, so we couldn't just use the typeck result as the type of the inline const's def. Closure has a similar issue, and it uses extra type params `CK, CS, U` to capture closure kind, input/output signature and upvars. I use a similar approach for inline consts, letting it have an extra type param `R`, and then `typeof(InlineConst<[paremt generics], R>)` would just be `R`. In borrowck region requirements are also propagated to the outer MIR body just like it's currently done for closure.
With this PR, inline consts in expression position are quitely usable now; however the usage in pattern position is still incomplete -- since those does not remain in the MIR borrowck couldn't verify the lifetime there. I have left an ignored test as a FIXME.
Some disucssions can be found on [this Zulip thread](https://rust-lang.zulipchat.com/#narrow/stream/260443-project-const-generics/topic/inline.20consts.20typeck).
cc `````@spastorino````` `````@lcnr`````
r? `````@nikomatsakis`````
`````@rustbot````` label A-inference F-inline_const T-compiler
This is just replicating the previous algorithm, but taking advantage of the
bitset structures to optimize into tighter and better optimized loops.
Particularly advantageous on enormous MIR blocks, which are relatively rare in
practice.
Revert "Add rustc lint, warning when iterating over hashmaps"
Fixes perf regressions introduced in https://github.com/rust-lang/rust/pull/90235 by temporarily reverting the relevant PR.
Add BorrowSet to public api
This PR adds `BorrowSet` to the public api so that verification tools can obtain the activation and reservation points of two phase borrows without having to redo calculations themselves (and thus potentially differently from rustc).
Turns out we already can obtain `MoveData` thanks to the public `HasMoveData` trait, so constructing a `BorrowSet` should not provide much of an issue. However, I can't speak to the soundness of this approach, is it safe to take an under-approximation of `MoveData`?
r? `@nikomatsakis`
Implement coherence checks for negative trait impls
The main purpose of this PR is to be able to [move Error trait to core](https://github.com/rust-lang/project-error-handling/issues/3).
This feature is necessary to handle the following from impl on box.
```rust
impl From<&str> for Box<dyn Error> { ... }
```
Without having negative traits affect coherence moving the error trait into `core` and moving that `From` impl to `alloc` will cause the from impl to no longer compiler because of a potential future incompatibility. The compiler indicates that `&str` _could_ introduce an `Error` impl in the future, and thus prevents the `From` impl in `alloc` that would cause overlap with `From<E: Error> for Box<dyn Error>`. Adding `impl !Error for &str {}` with the negative trait coherence feature will disable this error by encoding a stability guarantee that `&str` will never implement `Error`, making the `From` impl compile.
We would have this in `alloc`:
```rust
impl From<&str> for Box<dyn Error> {} // A
impl<E> From<E> for Box<dyn Error> where E: Error {} // B
```
and this in `core`:
```rust
trait Error {}
impl !Error for &str {}
```
r? `@nikomatsakis`
This PR was built on top of `@yaahc` PR #85764.
Language team proposal: to https://github.com/rust-lang/lang-team/issues/96
Don't mark for loop iter expression as desugared
We typically don't mark spans of lowered things as desugared. This helps Clippy rightly discern when code is (not) from expansion. This was discovered by ``@flip1995`` at https://github.com/rust-lang/rust-clippy/pull/7789#issuecomment-939289501.
Adopt let_else across the compiler
This performs a substitution of code following the pattern:
```
let <id> = if let <pat> = ... { identity } else { ... : ! };
```
To simplify it to:
```
let <pat> = ... { identity } else { ... : ! };
```
By adopting the `let_else` feature (cc #87335).
The PR also updates the syn crate because the currently used version of the crate doesn't support `let_else` syntax yet.
Note: Generally I'm the person who *removes* usages of unstable features from the compiler, not adds more usages of them, but in this instance I think it hopefully helps the feature get stabilized sooner and in a better state. I have written a [comment](https://github.com/rust-lang/rust/issues/87335#issuecomment-944846205) on the tracking issue about my experience and what I feel could be improved before stabilization of `let_else`.
Remove redundant member-constraint check
impl trait will, for each lifetime in the hidden type, register a "member constraint" that says the lifetime must be equal or outlive one of the lifetimes of the impl trait. These member constraints will be solved by borrowck
But, as you can see in the big red block of removed code, there was an ad-hoc check for member constraints happening at the site where they get registered. This check had some minor effects on diagnostics, but will fall down on its feet with my big type alias impl trait refactor. So we removed it and I pulled the removal out into a (hopefully) reviewable PR that works on master directly.
This performs a substitution of code following the pattern:
let <id> = if let <pat> = ... { identity } else { ... : ! };
To simplify it to:
let <pat> = ... { identity } else { ... : ! };
By adopting the let_else feature.
Add check that live_region is live in sanitize_promoted
This pull request fixes#88434 by adding a check in `sanitize_promoted` to ensure that only regions which are actually live are added to the `liveness_constraints` of the `BorrowCheckContext`.
To implement this change, I needed to add a method to `LivenessValues` which gets the elements contained by a region:
/// Returns an iterator of all the elements contained by the region `r`
crate fn get_elements(&self, row: N) -> impl Iterator<Item = Location> + '_
Then, inside `sanitize_promoted`, we check whether the iterator returned by this method is non-empty to ensure that the region is actually live at at least one location before adding that region to the `liveness_constraints` of the `BorrowCheckContext`.
This is my first pull request to the Rust repo, so any feedback on how I can improve this pull request or if there is a better way to fix this issue would be very appreciated.
Re-use TypeChecker instead of passing around some of its fields
In the future (for lazy TAIT) we will need more of its fields, but even ignoring that, this change seems reasonable on its own to me.
Fixes#67007
Currently, a 'borrowed data escapes' error does not mention
the specific lifetime involved (except indirectly through a suggestion
about adding a lifetime bound). We now explain the specific lifetime
relationship that failed to hold, which improves otherwise vague
error messages.
Don't suggest replacing region with 'static in NLL
Fixes#73159
This is similar to #69350 - if the user didn't initially
write out a 'static lifetime, adding 'static in response to
a lifetime error is usually the wrong thing to do.
Stabilize `const_panic`
Closes#51999
FCP completed in #89006
```@rustbot``` label +A-const-eval +A-const-fn +T-lang
cc ```@oli-obk``` for review (not `r?`'ing as not on lang team)
Remove some feature gates
The first commit removes various feature gates that are unused. The second commit replaces some `Fn` implementations with `Iterator` implementations, which is much cleaner IMO. The third commit replaces an unboxed_closures feature gate with min_specialization. For some reason the unboxed_closures feature gate suppresses the min_specialization feature gate from triggering on an `TrustedStep` impl. The last comment just turns a regular comment into a doc comment as drive by cleanup. I can move it to a separate PR if preferred.
Fixes#73159
This is similar to #69350 - if the user didn't initially
write out a 'static lifetime, adding 'static in response to
a lifetime error is usually the wrong thing to do.
Pick one possible lifetime in case there are multiple choices
In case a lifetime variable is created, but doesn't have an obvious lifetime in the list of named lifetimes that it should be inferred to, just pick the first one for the diagnostic.
This happens e.g. in
```rust
fn foo<'a, 'b>(a: Struct<'a>, b: Struct<'b>) -> impl Trait<'a, 'b> {
if bar() { a } else { b }
}
```
where we get a lifetime variable that combines the lifetimes of `a` and `b` creating a lifetime that is the intersection of both. Right now the type system cannot express this and thus we get an error, but that error also can't express this.
I can also create an entirely new diagnostic that mentions all involved lifetimes, so it would actually mention `'a` and `'b` instead of just `'b`.
Avoid spurious "previous iteration of loop" errors
Only follow backwards edges during `get_moved_indexes` if the move path is definitely initialized at loop entry. Otherwise, the error occurred prior to the loop, so we ignore the backwards edges to avoid generating misleading "value moved here, in previous iteration of loop" errors.
This patch also slightly improves the analysis of inits, including `NonPanicPathOnly` initializations (which are ignored by `drop_flag_effects::for_location_inits`). This is required for the definite initialization analysis, but may also help find certain skipped reinits in rare cases.
Patch passes all non-ignored src/test/ui testcases.
Fixes#72649.
This PR has several interconnected pieces:
1. In some of the NLL region error code, we now pass
around an `ObligationCause`, instead of just a plain `Span`.
This gets forwarded into `fulfill_cx.register_predicate_obligation`
during error reporting.
2. The general InferCtxt error reporting code is extended to
handle `ObligationCauseCode::BindingObligation`
3. A new enum variant `ConstraintCategory::Predicate` is added.
We try to avoid using this as the 'best blame constraint' - instead,
we use it to enhance the `ObligationCause` of the `BlameConstraint`
that we do end up choosing.
As a result, several NLL error messages now contain the same
"the lifetime requirement is introduced here" message as non-NLL
errors.
Having an `ObligationCause` available will likely prove useful
for future improvements to NLL error messages.
Introduce `Rvalue::ShallowInitBox`
Polished version of #88700.
Implements MCP rust-lang/compiler-team#460, and should allow #43596 to go forward.
In short, creating an empty box is split from a nullary-op `NullOp::Box` into two steps, first a call to `exchange_malloc`, then a `Rvalue::ShallowInitBox` which transmutes `*mut u8` to a shallow-initialized `Box<T>`. This allows the `exchange_malloc` call to unwind. Details can be found in the MCP.
`NullOp::Box` is not yet removed, purely to make reverting easier in case anything goes wrong as the result of this PR. If revert is needed a reversion of "Use Rvalue::ShallowInitBox for box expression" commit followed by a test bless should be sufficient.
Experiments in #88700 showed a very slight compile-time perf regression due to (supposedly) slightly more time spent in LLVM. We could omit unwind edge generation (in non-`oom=panic` case) in box expression MIR construction to restore perf; but I don't think it's necessary since runtime perf isn't affected and perf difference is rather small.
Be explicit about using Binder::dummy
This is somewhat of a late followup to the binder refactor PR. It removes `ToPredicate` and `ToPolyTraitImpls` that hide the use of `Binder::dummy`. While this does make code a bit more verbose, it allows us be more careful about where we create binders.
Another alternative here might be to add a new trait `ToBinder` or something with a `dummy()` fn. Which could still allow grepping but allows doing something like `trait_ref.dummy()` (but I also wonder if longer-term, it would be better to be even more explicit with a `bind_with_vars(ty::List::empty())` *but* that's not clear yet.
r? ``@nikomatsakis``
Add `ConstraintCategory::Usage` for handling aggregate construction
In some cases, we emit borrowcheck diagnostics pointing
at a particular field expression in a struct expression
(e.g. `MyStruct { field: my_expr }`). However, this
behavior currently relies on us choosing the
`ConstraintCategory::Boring` with the 'correct' span.
When adding additional variants to `ConstraintCategory`,
(or changing existing usages away from `ConstraintCategory::Boring`),
the current behavior can easily get broken, since a non-boring
constraint will get chosen over a boring one.
To make the diagnostic output less fragile, this commit
adds a `ConstraintCategory::Usage` variant. We use this variant
for the temporary assignments created for each field of
an aggregate we are constructing.
Using this new variant, we can emit a message mentioning
"this usage", emphasizing the fact that the error message
is related to the specific use site (in the struct expression).
This is preparation for additional work on improving NLL error messages
(see #57374)
Use explicit log level in tracing instrument macro
Specify a log level in tracing instrument macro explicitly.
Additionally reduce the used log level from a default info level to a
debug level (all of those appear to be developer oriented logs, so there
should be no need to include them in release builds).
Point to closure when emitting 'cannot move out' for captured variable
Attempts to fix#87456. The error message now points to the capturing closure, but I was not able to explain _why_ the closure implements `Fn` or `FnMut` (`TypeckResults::closure_kind_origins` did not contain anything for the closure in question).
cc `@Aaron1011`
Point at argument instead of call for their obligations
When an obligation is introduced by a specific `fn` argument, point at
the argument instead of the `fn` call if the obligation fails to be
fulfilled.
Move the information about pointing at the call argument expression in
an unmet obligation span from the `FulfillmentError` to a new
`ObligationCauseCode`.
When giving an error about an obligation introduced by a function call
that an argument doesn't fulfill, and that argument is a block, add a
span_label pointing at the innermost tail expression.
Current output:
```
error[E0425]: cannot find value `x` in this scope
--> f10.rs:4:14
|
4 | Some(x * 2)
| ^ not found in this scope
error[E0277]: expected a `FnOnce<({integer},)>` closure, found `Option<_>`
--> f10.rs:2:31
|
2 | let p = Some(45).and_then({
| ______________________--------_^
| | |
| | required by a bound introduced by this call
3 | | |x| println!("doubling {}", x);
4 | | Some(x * 2)
| | -----------
5 | | });
| |_____^ expected an `FnOnce<({integer},)>` closure, found `Option<_>`
|
= help: the trait `FnOnce<({integer},)>` is not implemented for `Option<_>`
```
Previous output:
```
error[E0425]: cannot find value `x` in this scope
--> f10.rs:4:14
|
4 | Some(x * 2)
| ^ not found in this scope
error[E0277]: expected a `FnOnce<({integer},)>` closure, found `Option<_>`
--> f10.rs:2:22
|
2 | let p = Some(45).and_then({
| ^^^^^^^^ expected an `FnOnce<({integer},)>` closure, found `Option<_>`
|
= help: the trait `FnOnce<({integer},)>` is not implemented for `Option<_>`
```
Partially address #27300. Will require rebasing on top of #88546.
In some cases, we emit borrowcheck diagnostics pointing
at a particular field expression in a struct expression
(e.g. `MyStruct { field: my_expr }`). However, this
behavior currently relies on us choosing the
`ConstraintCategory::Boring` with the 'correct' span.
When adding additional variants to `ConstraintCategory`,
(or changing existing usages away from `ConstraintCategory::Boring`),
the current behavior can easily get broken, since a non-boring
constraint will get chosen over a boring one.
To make the diagnostic output less fragile, this commit
adds a `ConstraintCategory::Usage` variant. We use this variant
for the temporary assignments created for each field of
an aggregate we are constructing.
Using this new variant, we can emit a message mentioning
"this usage", emphasizing the fact that the error message
is related to the specific use site (in the struct expression).
This is preparation for additional work on improving NLL error messages
(see #57374)
Move the information about pointing at the call argument expression in
an unmet obligation span from the `FulfillmentError` to a new
`ObligationCauseCode`.
Specify a log level in tracing instrument macro explicitly.
Additionally reduce the used log level from a default info level to a
debug level (all of those appear to be developer oriented logs, so there
should be no need to include them in release builds).
Only follow backwards edges during get_moved_indexes if the move path is
definitely initialized at loop entry. Otherwise, the error occurred prior to the
loop, so we ignore the backwards edges to avoid generating misleading "value
moved here, in previous iteration of loop" errors.
This patch also slightly improves the analysis of inits, including
NonPanicPathOnly initializations (which are ignored by
drop_flag_effects::for_location_inits). This is required for the definite
initialization analysis, but may also help find certain skipped reinits in rare
cases.
Patch passes all non-ignored src/test/ui testcases.
