Translation of the lint message happens when the actual diagnostic is
created, not when the lint is buffered. Generating the message from
BuiltinLintDiag ensures that all required data to construct the message
is preserved in the LintBuffer, eventually allowing the messages to be
moved to fluent.
Remove the `msg` field from BufferedEarlyLint, it is either generated
from the data in the BuiltinLintDiag or stored inside
BuiltinLintDiag::Normal.
An earlier commit included the change for a suggestion here.
Unfortunately, it also used unwrap instead of dying properly.
Roll out the ~~rice paper~~ EarlyDiagCtxt before we do anything that
might leave a mess.
Trim crate graph
This PR removes some unnecessary `Cargo.toml` entries, and makes some other small related cleanups that I found while looking at this stuff.
r? ```@pnkfelix```
Change `SIGPIPE` ui from `#[unix_sigpipe = "..."]` to `-Zon-broken-pipe=...`
In the stabilization [attempt](https://github.com/rust-lang/rust/pull/120832) of `#[unix_sigpipe = "sig_dfl"]`, a concern was [raised ](https://github.com/rust-lang/rust/pull/120832#issuecomment-2007394609) related to using a language attribute for the feature: Long term, we want `fn lang_start()` to be definable by any crate, not just libstd. Having a special language attribute in that case becomes awkward.
So as a first step towards the next stabilization attempt, this PR changes the `#[unix_sigpipe = "..."]` attribute to a compiler flag `-Zon-broken-pipe=...` to remove that concern, since now the language is not "contaminated" by this feature.
Another point was [also raised](https://github.com/rust-lang/rust/pull/120832#issuecomment-1987023484), namely that the ui should not leak **how** it does things, but rather what the **end effect** is. The new flag uses the proposed naming. This is of course something that can be iterated on further before stabilization.
Tracking issue: https://github.com/rust-lang/rust/issues/97889
There are a few common abbreviations like `use rustc_ast as ast` and
`use rust_hir as hir` for names that are used a lot. But there are also
some cases where a crate is renamed just once in the whole codebase, and
that ends up making things harder to read rather than easier. This
commit removes them.
In the stabilization attempt of `#[unix_sigpipe = "sig_dfl"]`, a concern
was raised related to using a language attribute for the feature: Long
term, we want `fn lang_start()` to be definable by any crate, not just
libstd. Having a special language attribute in that case becomes
awkward.
So as a first step towards towards the next stabilization attempt, this
PR changes the `#[unix_sigpipe = "..."]` attribute to a compiler flag
`-Zon-broken-pipe=...` to remove that concern, since now the language
is not "contaminated" by this feature.
Another point was also raised, namely that the ui should not leak
**how** it does things, but rather what the **end effect** is. The new
flag uses the proposed naming. This is of course something that can be
iterated on further before stabilization.
`-Z debug-macros` is "stabilized" by enabling it by default and removing.
`-Z collapse-macro-debuginfo` is stabilized as `-C collapse-macro-debuginfo`.
It now supports all typical boolean values (`parse_opt_bool`) in addition to just yes/no.
Default value of `collapse_debuginfo` was changed from `false` to `external` (i.e. collapsed if external, not collapsed if local).
`#[collapse_debuginfo]` attribute without a value is no longer supported to avoid guessing the default.
Enable `CrateNum` query feeding via `TyCtxt`
Instead of having a magic function that violates some `TyCtxtFeed` invariants, add a `create_def` equivalent for `CrateNum`s.
Note that this still isn't tracked by the query system (unlike `create_def`), and that feeding most `CrateNum` queries for crates other than the local one will likely cause performance regressions.
These things should be attempted on their own separately, but this PR should stand on its own
Do `check_coroutine_obligations` once per typeck root
We only need to do `check_coroutine_obligations` once per typeck root, especially since the new solver can't really (easily) associate which obligations correspond to which coroutines.
This requires us to move the checks for sized coroutine fields into `mir_coroutine_witnesses`, but that's fine imo.
r? lcnr
Implement Modified Condition/Decision Coverage
This is an implementation based on llvm backend support (>= 18) by `@evodius96` and branch coverage support by `@Zalathar.`
### Major changes:
* Add -Zcoverage-options=mcdc as switch. Now coverage options accept either `no-branch`, `branch`, or `mcdc`. `mcdc` also enables `branch` because it is essential to work.
* Add coverage mapping for MCDCBranch and MCDCDecision. Note that MCDCParameter evolves from llvm 18 to llvm 19. The mapping in rust side mainly references to 19 and is casted to 18 types in llvm wrapper.
* Add wrapper for mcdc instrinc functions from llvm. And inject associated statements to mir.
* Add BcbMappingKind::Decision, I'm not sure is it proper but can't find a better way temporarily.
* Let coverage-dump support parsing MCDCBranch and MCDCDecision from llvm ir.
* Add simple tests to check whether mcdc works.
* Same as clang, currently rustc does not generate instrument for decision with more than 6 condtions or only 1 condition due to considerations of resource.
### Implementation Details
1. To get information about conditions and decisions, `MCDCState` in `BranchInfoBuilder` is used during hir lowering to mir. For expressions with logical op we call `Builder::visit_coverage_branch_operation` to record its sub conditions, generate condition ids for them and save their spans (to construct the span of whole decision). This process mainly references to the implementation in clang and is described in comments over `MCDCState::record_conditions`. Also true marks and false marks introduced by branch coverage are used to detect where the decision evaluation ends: the next id of the condition == 0.
2. Once the `MCDCState::decision_stack` popped all recorded conditions, we can ensure that the decision is checked over and push it into `decision_spans`. We do not manually insert decision span to avoid complexity from then_else_break in nested if scopes.
3. When constructing CoverageSpans, add condition info to BcbMappingKind::Branch and decision info to BcbMappingKind::Decision. If the branch mapping has non-zero condition id it will be transformed to MCDCBranch mapping and insert `CondBitmapUpdate` statements to its evaluated blocks. While decision bcb mapping will insert `TestVectorBitmapUpdate` in all its end blocks.
### Usage
```bash
echo "[build]\nprofiler=true" >> config.toml
./x build --stage 1
./x test tests/coverage/mcdc_if.rs
```
to build the compiler and run tests.
```shell
export PATH=path/to/llvm-build:$PATH
rustup toolchain link mcdc build/host/stage1
cargo +mcdc rustc --bin foo -- -Cinstrument-coverage -Zcoverage-options=mcdc
cd target/debug
LLVM_PROFILE_FILE="foo.profraw" ./foo
llvm-profdata merge -sparse foo.profraw -o foo.profdata
llvm-cov show ./foo -instr-profile=foo.profdata --show-mcdc
```
to check "foo" code.
### Problems to solve
For now decision mapping will insert statements to its all end blocks, which may be optimized by inserting a final block of the decision. To do this we must also trace the evaluated value at each end of the decision and join them separately.
This implementation is not heavily tested so there should be some unrevealed issues. We are going to check our rust products in the next. Please let me know if you had any suggestions or comments.
Introduce perma-unstable `wasm-c-abi` flag
Now that `wasm-bindgen` v0.2.88 supports the spec-compliant C ABI, the idea is to switch to that in a future version of Rust. In the meantime it would be good to let people test and play around with it.
This PR introduces a new perma-unstable `-Zwasm-c-abi` compiler flag, which switches to the new spec-compliant C ABI when targeting `wasm32-unknown-unknown`.
Alternatively, we could also stabilize this and then deprecate it when we switch. I will leave this to the Rust maintainers to decide.
This is a companion PR to #117918, but they could be merged independently.
MCP: https://github.com/rust-lang/compiler-team/issues/703
Tracking issue: https://github.com/rust-lang/rust/issues/122532
Currently it's a method on `EarlyDiagCtxt`, which is not the right place
for it at all -- `EarlyDiagCtxt` is used to issue diagnostics, but
shouldn't be doing any of the actual checking.
This commit moves it into a standalone function that takes an
`EarlyDiagCtxt` as an argument, which is more sensible. This does
require adding `EarlyDiagCtxt::early_struct_warn`, so a warning can be
returned and then modified with a note. (And that likely explains why
somebody put `initialize_checked_jobserver` into `EarlyDiagCtxt` in the
first place.)
Currently `SourceMap` is constructed slightly later than
`SessionGlobals`, and inserted. This commit changes things so they are
done at the same time.
Benefits:
- `SessionGlobals::source_map` changes from
`Lock<Option<Lrc<SourceMap>>>` to `Option<Lrc<SourceMap>>`. It's still
optional, but mutability isn't required because it's initialized at
construction.
- `set_source_map` is removed, simplifying `run_compiler`, which is
good because that's a critical function and it's nice to make it
simpler.
This requires moving things around a bit, so the necessary inputs are
available when `SessionGlobals` is created, in particular the `loader`
and `hash_kind`, which are no longer computed by `build_session`. These
inputs are captured by the new `SourceMapInputs` type, which is threaded
through various places.
conditionally ignore fatal diagnostic in the SilentEmitter
This change is primarily meant to allow rustfmt to ignore all diagnostics when using the `SilentEmitter`. Back in #121301 the `SilentEmitter` was shared between rustc and rustfmt. This changed rustfmt's behavior from ignoring all diagnostic to emitting fatal diagnostics, which lead to https://github.com/rust-lang/rustfmt/issues/6109.
These changes allow rustfmt to maintain its previous behaviour when using the `SilentEmitter`, while allowing rustc code to still emit fatal diagnostics.
Suggest `RUST_MIN_STACK` workaround on overflow
For some Rust crates, like p384, we can't do a whole lot about it even if the stack overflow is reported like in rust-lang/rust#122357 because the problem may be inside LLVM or another codegen backend. We can, however, suggest people set a new `RUST_MIN_STACK` value while handling the SIGSEGV, as that stack-setting will carry forward into the dylib.
As a bonus, this also leads to cleaning up the stack-setting code a bit.
Backend and target selection is a mess: the target can override the
backend (via `Target::default_codegen_backend`), *and* the backend can
override the target (via `CodegenBackend::target_override`).
The code that handles this is ugly. It calls `build_target_config`
twice, once before getting the backend and once again afterward. It also
must check that both overrides aren't triggering at the same time.
This commit removes the latter override. It's used in rust-gpu but
@eddyb said via Zulip that removing it would be ok. This simplifies the
code greatly, and will allow some nice follow-up refactorings.
This change is primarily meant to allow rustfmt to ignore all
diagnostics when using the `SilentEmitter`. Back in PR 121301 the
`SilentEmitter` was shared between rustc and rustfmt. This changed
rustfmt's behavior from ignoring all diagnostic to emitting fatal
diagnostics.
These changes allow rustfmt to maintain it's previous behaviour when
using the SilentEmitter, while allowing rustc code to still emit fatal
diagnostics.
Make incremental sessions identity no longer depend on the crate names provided by source code
This makes incremental sessions identity no longer depend on the crate names provided by source code, implementing
https://github.com/rust-lang/compiler-team/issues/726.
r? ````@oli-obk````
coverage: Remove or migrate all unstable values of `-Cinstrument-coverage`
(This PR was substantially overhauled from its original version, which migrated all of the existing unstable values intact.)
This PR takes the three nightly-only values that are currently accepted by `-Cinstrument-coverage`, completely removes two of them (`except-unused-functions` and `except-unused-generics`), and migrates the third (`branch`) over to a newly-introduced unstable flag `-Zcoverage-options`.
I have a few motivations for wanting to do this:
- It's unclear whether anyone actually uses the `except-unused-*` values, so this serves as an opportunity to either remove them, or prompt existing users to object to their removal.
- After #117199, the stable values of `-Cinstrument-coverage` treat it as a boolean-valued flag, so having nightly-only extra values feels out-of-place.
- Nightly-only values also require extra ad-hoc code to make sure they aren't accidentally exposed to stable users.
- The new system allows multiple different settings to be toggled independently, which isn't possible in the current single-value system.
- The new system makes it easier to introduce new behaviour behind an unstable toggle, and then gather nightly-user feedback before possibly making it the default behaviour for all users.
- The new system also gives us a convenient place to put relatively-narrow options that won't ever be the default, but that nightly users might still want access to.
- It's likely that we will eventually want to give stable users more fine-grained control over coverage instrumentation. The new flag serves as a prototype of what that stable UI might eventually look like.
The `branch` option is a placeholder that currently does nothing. It will be used by #122322 to opt into branch coverage instrumentation.
---
I see `-Zcoverage-options` as something that will exist more-or-less indefinitely, though individual sub-options might come and go as appropriate. I think there will always be some demand for nightly-only toggles, so I don't see `-Zcoverage-options` itself ever being stable, though we might eventually stabilize something similar to it.
Verify that query keys result in unique dep nodes
This implements checking that query keys result into unique dep nodes as mentioned in https://github.com/rust-lang/rust/pull/112469.
We could do a perf check to see how expensive this is.
r? `@michaelwoerister`
