tvOS simulator support on Apple Silicon for rustc
Closes or is a subtask of #115692.
# Tier 3 Target Policy
At this tier, the Rust project provides no official support for a target, so we place minimal requirements on the introduction of targets.
> * A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
See [`src/doc/rustc/src/platform-support/apple-tvos.md`](4ab4d48ee5/src/doc/rustc/src/platform-support/apple-tvos.md)
> * Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
> * Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
> * If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
This naming scheme matches `$ARCH-$VENDOR-$OS-$ABI` (I think `sim` is the ABI here) which is matches the iOS apple silicon simulator (`aarch64-apple-ios-sim`). [There is some discussion about renaming some apple simulator targets](https://github.com/rust-lang/rust/issues/115692#issuecomment-1712931910) to match the `-sim` suffix but that is outside the scope of this PR.
> * Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
>
> * The target must not introduce license incompatibilities.
> * Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
> * The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
> * Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
> * "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
This contribution is fully available under the standard Rust license with no additional legal restrictions whatsoever. This PR does not introduce any new dependency less permissive than the Rust license policy.
The new targets do not depend on proprietary libraries.
> * Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This new target implements as much of the standard library as the other tvOS targets do.
> * The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
I have added the target to the other tvOS targets in [`src/doc/rustc/src/platform-support/apple-tvos.md`](4ab4d48ee5/src/doc/rustc/src/platform-support/apple-tvos.md)
> * Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> * This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
> * Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via ``@)`` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
> * Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
> * Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> * In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
I acknowledge these requirements and intend to ensure that they are met.
This target does not touch any existing tier 2 or tier 1 targets and should not break any other targets.
Implement `gen` blocks in the 2024 edition
Coroutines tracking issue https://github.com/rust-lang/rust/issues/43122
`gen` block tracking issue https://github.com/rust-lang/rust/issues/117078
This PR implements `gen` blocks that implement `Iterator`. Most of the logic with `async` blocks is shared, and thus I renamed various types that were referring to `async` specifically.
An example usage of `gen` blocks is
```rust
fn foo() -> impl Iterator<Item = i32> {
gen {
yield 42;
for i in 5..18 {
if i.is_even() { continue }
yield i * 2;
}
}
}
```
The limitations (to be resolved) of the implementation are listed in the tracking issue
coverage: Consistently remove unused counter IDs from expressions/mappings
If some coverage counters were removed by MIR optimizations, we need to take care not to refer to those counter IDs in coverage mappings, and instead replace them with a constant zero value. If we don't, `llvm-cov` might see a too-large counter ID and silently discard the entire function from its coverage reports.
Fixes#117012.
Distribute cg_clif as rustup component on the nightly channel
This makes it possible to use cg_clif using:
```bash
$ rustup component add rustc-codegen-cranelift-preview --toolchain nightly
$ RUSTFLAGS="-Zcodegen-backend=cranelift" cargo +nightly build
```
cc https://github.com/rust-lang/compiler-team/issues/405.
r? `@Mark-Simulacrum`
This triggers a consistency check in rust (that all linker flavours
must have identical arguments), and on NetBSD/i386, the 32-bitness
is implicitly chosen through the chosen toolchain, and appears to
not be required. So drop it, and also drop the imports of the
now-no-longer-used identifiers.
Bump stdarch submodule and remove special handling for LLVM intrinsics that are no longer needed
Bumps stdarch to pull https://github.com/rust-lang/stdarch/pull/1477, which reimplemented some functions with portable SIMD intrinsics instead of arch specific LLVM intrinsics.
Handling of those LLVM intrinsics is removed from cranelift codegen and miri.
cc `@RalfJung` `@bjorn3`
Cleanup and improve `--check-cfg` implementation
This PR removes some indentation in the code, as well as preventing some bugs/misusages and fix a nit in the doc.
r? ```@petrochenkov``` (maybe)
When encountering sealed traits, point types that implement it
```
error[E0277]: the trait bound `S: d::Hidden` is not satisfied
--> $DIR/sealed-trait-local.rs:53:20
|
LL | impl c::Sealed for S {}
| ^ the trait `d::Hidden` is not implemented for `S`
|
note: required by a bound in `c::Sealed`
--> $DIR/sealed-trait-local.rs:17:23
|
LL | pub trait Sealed: self::d::Hidden {
| ^^^^^^^^^^^^^^^ required by this bound in `Sealed`
= note: `Sealed` is a "sealed trait", because to implement it you also need to implement `c::d::Hidden`, which is not accessible; this is usually done to force you to use one of the provided types that already implement it
= help: the following types implement the trait:
- c::X
- c::Y
```
The last `help` is new.
Despite what I claimed in an earlier commit, the ordering does matter to
some degree. Using `FxIndexSet` prevents changes to the error message
order in `tests/ui/check-cfg/mix.rs`.
`parse_cfgspecs` and `parse_check_cfg` run very early, before the main
interner is running. They each use a short-lived interner and convert
all interned symbols to strings in their output data structures. Once
the main interner starts up, these data structures get converted into
new data structures that are identical except with the strings converted
to symbols.
All is not obvious from the current code, which is a mess, particularly
with inconsistent naming that obscures the parallel string/symbol data
structures. This commit clean things up a lot.
- The existing `CheckCfg` type is generic, allowing both
`CheckCfg<String>` and `CheckCfg<Symbol>` forms. This is really
useful, but it defaults to `String`. The commit removes the default so
we have to use `CheckCfg<String>` and `CheckCfg<Symbol>` explicitly,
which makes things clearer.
- Introduces `Cfg`, which is generic over `String` and `Symbol`, similar
to `CheckCfg`.
- Renames some things.
- `parse_cfgspecs` -> `parse_cfg`
- `CfgSpecs` -> `Cfg<String>`, plus it's used in more places, rather
than the underlying `FxHashSet` type.
- `CrateConfig` -> `Cfg<Symbol>`.
- `CrateCheckConfig` -> `CheckCfg<Symbol>`
- Adds some comments explaining the string-to-symbol conversions.
- `to_crate_check_config`, which converts `CheckCfg<String>` to
`CheckCfg<Symbol>`, is inlined and removed and combined with the
overly-general `CheckCfg::map_data` to produce
`CheckCfg::<String>::intern`.
- `build_configuration` now does the `Cfg<String>`-to-`Cfg<Symbol>`
conversion, so callers don't need to, which removes the need for
`to_crate_config`.
The diff for two of the fields in `Config` is a good example of the
improved clarity:
```
- pub crate_cfg: FxHashSet<(String, Option<String>)>,
- pub crate_check_cfg: CheckCfg,
+ pub crate_cfg: Cfg<String>,
+ pub crate_check_cfg: CheckCfg<String>,
```
Compare that with the diff for the corresponding fields in `ParseSess`,
and the relationship to `Config` is much clearer than before:
```
- pub config: CrateConfig,
- pub check_config: CrateCheckConfig,
+ pub config: Cfg<Symbol>,
+ pub check_config: CheckCfg<Symbol>,
```
In `parse_cfg`, we now construct a `FxHashSet<String>` directly instead of
constructing a `FxHashSet<Symbol>` and then immediately converting it to a
`FxHashSet<String>`(!)
(The type names made this behaviour non-obvious. The next commit will
make the type names clearer.)
In `test_edition_parsing`, change the
`build_session_options_and_crate_config` call to
`build_session_options`, because the config isn't used.
That leaves a single call site for
`build_session_options_and_crate_config`, so just inline and remove it.
Allow partially moved values in match
This PR attempts to unify the behaviour between `let _ = PLACE`, `let _: TY = PLACE;` and `match PLACE { _ => {} }`.
The logical conclusion is that the `match` version should not check for uninitialised places nor check that borrows are still live.
The `match PLACE {}` case is handled by keeping a `FakeRead` in the unreachable fallback case to verify that `PLACE` has a legal value.
Schematically, `match PLACE { arms }` in surface rust becomes in MIR:
```rust
PlaceMention(PLACE)
match PLACE {
// Decision tree for the explicit arms
arms,
// An extra fallback arm
_ => {
FakeRead(ForMatchedPlace, PLACE);
unreachable
}
}
```
`match *borrow { _ => {} }` continues to check that `*borrow` is live, but does not read the value.
`match *borrow {}` both checks that `*borrow` is live, and fake-reads the value.
Continuation of ~https://github.com/rust-lang/rust/pull/102256~ ~https://github.com/rust-lang/rust/pull/104844~
Fixes https://github.com/rust-lang/rust/issues/99180https://github.com/rust-lang/rust/issues/53114
NVPTX: Allow PassMode::Direct for ptx kernels for now
Upgrading the nvptx toolchain to the newest nightly makes it hit the assert that links to https://github.com/rust-lang/rust/issues/115666
It seems like most targets get around this by using `PassMode::Indirect`. That is impossible for the kernel as it's not a normal call, but instead the arguments are copied from CPU to GPU and the passed pointer would be invalid when it reached the GPU.
I also made an experiment with `PassMode::Cast` but at least the most simple version of this broke the assembly API tests.
I added fixing the pass mode in my unofficial tracking issue list (I do not have the necessary permissions to update to official one). https://github.com/rust-lang/rust/issues/38788#issuecomment-1079021853
Since the ptx_abi is currently unstable and have been working with `PassMode::Direct` for more than a year now, the steps above is hopefully sufficient to enable it as an exception until I can prioritize to fix it. I'm currently looking at steps to enable the CI for nvptx64 again and would prefer to finish that first.
Fix ICE: Restrict param constraint suggestion
When encountering an associated item with a type param that could be constrained, do not look at the parent item if the type param comes from the associated item.
Fix#117209, fix#89868.
Properly restore snapshot when failing to recover parsing ternary
If the recovery parsed an expression, then failed to eat a `:`, it would return `false` without restoring the snapshot. Fix this by always restoring the snapshot when returning `false`.
Draft for now because I'd like to try and improve this recovery further.
Fixes#117208
Remove `rustc_symbol_mangling/messages.ftl`.
It contains a single message that (a) doesn't contain any natural language, and (b) is only used in tests.
r? `@davidtwco`
```
error[E0277]: the trait bound `S: d::Hidden` is not satisfied
--> $DIR/sealed-trait-local.rs:53:20
|
LL | impl c::Sealed for S {}
| ^ the trait `d::Hidden` is not implemented for `S`
|
note: required by a bound in `c::Sealed`
--> $DIR/sealed-trait-local.rs:17:23
|
LL | pub trait Sealed: self::d::Hidden {
| ^^^^^^^^^^^^^^^ required by this bound in `Sealed`
= note: `Sealed` is a "sealed trait", because to implement it you also need to implement `c::d::Hidden`, which is not accessible; this is usually done to force you to use one of the provided types that already implement it
= help: the following types implement the trait:
- c::X
- c::Y
```
The last `help` is new.
Only call `mir_const_qualif` if absolutely necessary
Pull the perf change out of https://github.com/rust-lang/rust/pull/113617
This should not have any impact on behaviour (if it does, we'll see an ICE)
Lint overlapping ranges as a separate pass
This reworks the [`overlapping_range_endpoints`](https://doc.rust-lang.org/beta/nightly-rustc/rustc_lint_defs/builtin/static.OVERLAPPING_RANGE_ENDPOINTS.html) lint. My motivations are:
- It was annoying to have this lint entangled with the exhaustiveness algorithm, especially wrt librarification;
- This makes the lint behave consistently.
Here's the consistency story. Take the following matches:
```rust
match (0u8, true) {
(0..=10, true) => {}
(10..20, true) => {}
(10..20, false) => {}
_ => {}
}
match (true, 0u8) {
(true, 0..=10) => {}
(true, 10..20) => {}
(false, 10..20) => {}
_ => {}
}
```
There are two semantically consistent options: option 1 we lint all overlaps between the ranges, option 2 we only lint the overlaps that could actually occur (i.e. the ones with `true`). Option 1 is what this PR does. Option 2 is possible but would require the exhaustiveness algorithm to track more things for the sake of the lint. The status quo is that we're inconsistent between the two.
Option 1 generates more false postives, but I prefer it from a maintainer's perspective. I do think the difference is minimal; cases where the difference is observable seem rare.
This PR adds a separate pass, so this will have a perf impact. Let's see how bad, it looked ok locally.
This ensures that cg_clif can be built for targets that aren't natively
supported by Cranelift. It will not be possible to compile for the host
in this case, but cross-compilation will still be possible.
We won't distribute cg_clif as rustup component for any targets that
aren't natively supported by Cranelift, but will still build it if
codegen-backends lists "cranelift".
notes
This commit extends the `#[diagnostic::on_unimplemented]` (and
`#[rustc_on_unimplemented]`) attributes to allow multiple `note`
options. This enables emitting multiple notes for custom error messages.
For now I've opted to not change any of the existing usages of
`#[rustc_on_unimplemented]` and just updated the relevant compile tests.
Rollup of 6 pull requests
Successful merges:
- #114998 (feat(docs): add cargo-pgo to PGO documentation 📝)
- #116868 (Tweak suggestion span for outer attr and point at item following invalid inner attr)
- #117240 (Fix documentation typo in std::iter::Iterator::collect_into)
- #117241 (Stash and cancel cycle errors for auto trait leakage in opaques)
- #117262 (Create a new ConstantKind variant (ZeroSized) for StableMIR)
- #117266 (replace transmute by raw pointer cast)
r? `@ghost`
`@rustbot` modify labels: rollup
Create a new ConstantKind variant (ZeroSized) for StableMIR
ZeroSized constants can be represented as `mir::Const::Val` even if their layout is not yet known. In those cases, CrateItem::body() was crashing when trying to convert a `ConstValue::ZeroSized` into its stable counterpart `ConstantKind::Allocated`.
Instead, we now map `ConstValue::ZeroSized` into a new variant: `ConstantKind::ZeroSized`.
**Note:** I didn't add any new test here since we already have covering tests in our project repository which I manually confirmed that will fix the issue.
Stash and cancel cycle errors for auto trait leakage in opaques
We don't need to emit a traditional cycle error when we have a selection error that explains what's going on but in more detail.
We may want to augment this error to actually point out the cycle, now that the cycle error is not being emitted. We could do that by storing the set of opaques that was in the `CyclePlaceholder` that gets returned from `type_of_opaque`.
r? `@oli-obk` cc `@estebank` #117235
ZeroSized constants can be represented as `mir::Const::Val` even if
their layout is not yet known. In those cases, CrateItem::body() was
crashing when trying to convert a `ConstValue::ZeroSized` into its
stable counterpart `ConstantKind::Allocated`.
Instead, we now map `ConstValue::ZeroSized` into a new variant:
`ConstantKind::ZeroSized`.
Allow target specs to use an LLD flavor, and self-contained linking components
This PR allows:
- target specs to use an LLD linker-flavor: this is needed to switch `x86_64-unknown-linux-gnu` to using LLD, and is currently not possible because the current flavor json serialization fails to roundtrip on the modern linker-flavors. This can e.g. be seen in https://github.com/rust-lang/rust/pull/115622#discussion_r1321312880 which explains where an `Lld::Yes` is ultimately deserialized into an `Lld::No`.
- target specs to declare self-contained linking components: this is needed to switch `x86_64-unknown-linux-gnu` to using `rust-lld`
- adds an end-to-end test of a custom target json simulating `x86_64-unknown-linux-gnu` being switched to using `rust-lld`
- disables codegen backends from participating because they don't support `-Zgcc-ld=lld` which is the basis of mcp510.
r? `@petrochenkov:` if the approach discussed https://github.com/rust-lang/rust/pull/115622#discussion_r1329403467 and on zulip would work for you: basically, see if we can emit only modern linker flavors in the json specs, but accept both old and new flavors while reading them, to fix the roundtrip issue.
The backwards compatible `LinkSelfContainedDefault` variants are still serialized and deserialized in `crt-objects-fallback`, while the spec equivalent of e.g. `-Clink-self-contained=+linker` is serialized into a different json object (with future-proofing to incorporate `crt-objects-fallback` in the future).
---
I've been test-driving this in https://github.com/rust-lang/rust/pull/113382 to test actually switching `x86_64-unknown-linux-gnu` to `rust-lld` (and fix what needs to be fixed in CI, bootstrap, etc), and it seems to work fine.
When expecting closure argument but finding block provide suggestion
Detect if there is a potential typo where the `{` meant to open the closure body was written before the body.
```
error[E0277]: expected a `FnOnce<({integer},)>` closure, found `Option<usize>`
--> $DIR/ruby_style_closure_successful_parse.rs:3:31
|
LL | let p = Some(45).and_then({|x|
| ______________________--------_^
| | |
| | required by a bound introduced by this call
LL | | 1 + 1;
LL | | Some(x * 2)
| | ----------- this tail expression is of type `Option<usize>`
LL | | });
| |_____^ expected an `FnOnce<({integer},)>` closure, found `Option<usize>`
|
= help: the trait `FnOnce<({integer},)>` is not implemented for `Option<usize>`
note: required by a bound in `Option::<T>::and_then`
--> $SRC_DIR/core/src/option.rs:LL:COL
help: you might have meant to open the closure body instead of placing a closure within a block
|
LL - let p = Some(45).and_then({|x|
LL + let p = Some(45).and_then(|x| {
|
```
Detect the potential typo where the closure header is missing.
```
error[E0277]: expected a `FnOnce<(&bool,)>` closure, found `bool`
--> $DIR/block_instead_of_closure_in_arg.rs:3:23
|
LL | Some(true).filter({
| _________________------_^
| | |
| | required by a bound introduced by this call
LL | |/ if number % 2 == 0 {
LL | || number == 0
LL | || } else {
LL | || number != 0
LL | || }
| ||_________- this tail expression is of type `bool`
LL | | });
| |______^ expected an `FnOnce<(&bool,)>` closure, found `bool`
|
= help: the trait `for<'a> FnOnce<(&'a bool,)>` is not implemented for `bool`
note: required by a bound in `Option::<T>::filter`
--> $SRC_DIR/core/src/option.rs:LL:COL
help: you might have meant to create the closure instead of a block
|
LL | Some(true).filter(|_| {
| +++
```
Partially address #27300. Fix#104690.
When encountering an associated item with a type param that could be
constrained, do not look at the parent item if the type param comes from
the associated item.
Fix#117209.
Rollup of 8 pull requests
Successful merges:
- #116905 (refactor(compiler/resolve): simplify some code)
- #117095 (Add way to differentiate argument locals from other locals in Stable MIR)
- #117143 (Avoid unbounded O(n^2) when parsing nested type args)
- #117194 (Minor improvements to `rustc_incremental`)
- #117202 (Revert "Remove TaKO8Ki from reviewers")
- #117207 (The value of `-Cinstrument-coverage=` doesn't need to be `Option`)
- #117214 (Quietly fail if an error has already occurred)
- #117221 (Rename type flag `HAS_TY_GENERATOR` to `HAS_TY_COROUTINE`)
r? `@ghost`
`@rustbot` modify labels: rollup
The value of `-Cinstrument-coverage=` doesn't need to be `Option`
(Extracted from #117199, since this is a purely internal cleanup that can land independently.)
Not using this flag is identical to passing `-Cinstrument-coverage=off`, so there's no need to distinguish between `None` and `Some(Off)`.
Add way to differentiate argument locals from other locals in Stable MIR
This PR resolvesrust-lang/project-stable-mir#47 which request a way to differentiate argument locals in a SMIR `Body` from other locals.
Specifically, this PR exposes the `arg_count` field from the MIR `Body`. However, I'm opening this as a draft PR because I think there are a few outstanding questions on how this information should be exposed and described. Namely:
- Is exposing `arg_count` the best way to surface this information to SMIR users? Would it be better to leave `arg_count` as a private field and add public methods (e.g. `fn arguments(&self) -> Iter<'_, LocalDecls>`) that may use the underlying `arg_count` info from the MIR body, but expose this information to users in a more convenient form? Or is it best to stick close to the current MIR convention?
- If the answer to the above point is to stick with the current MIR convention (`arg_count`), is it reasonable to also commit to sticking to the current MIR convention that the first local is always the return local, while the next `arg_count` locals are always the (in-order) argument locals?
- Should `Body` in SMIR only represent function bodies (as implied by the comment I added)? That seems to be the current case in MIR, but should this restriction always be the case for SMIR?
r? `@celinval`
r? `@oli-obk`
