make `PlaceholderConst` not store the type of the const
Currently the `Placeholder` variant on `ConstKind` is 28 bytes when with this PR its 8 bytes, i am not sure this is really useful at all rn since `Unevaluated` and `Value` variants are huge still but eventually it should be possible to get both down to 16 bytes 🤔. Mostly opening this to see if this change has any perf impact when done before it can make `ConstKind`/`ConstS` smaller
And likewise for the `Const::val` method.
Because its type is called `ConstKind`. Also `val` is a confusing name
because `ConstKind` is an enum with seven variants, one of which is
called `Value`. Also, this gives consistency with `TyS` and `PredicateS`
which have `kind` fields.
The commit also renames a few `Const` variables from `val` to `c`, to
avoid confusion with the `ConstKind::Value` variant.
This commit makes type folding more like the way chalk does it.
Currently, `TypeFoldable` has `fold_with` and `super_fold_with` methods.
- `fold_with` is the standard entry point, and defaults to calling
`super_fold_with`.
- `super_fold_with` does the actual work of traversing a type.
- For a few types of interest (`Ty`, `Region`, etc.) `fold_with` instead
calls into a `TypeFolder`, which can then call back into
`super_fold_with`.
With the new approach, `TypeFoldable` has `fold_with` and
`TypeSuperFoldable` has `super_fold_with`.
- `fold_with` is still the standard entry point, *and* it does the
actual work of traversing a type, for all types except types of
interest.
- `super_fold_with` is only implemented for the types of interest.
Benefits of the new model.
- I find it easier to understand. The distinction between types of
interest and other types is clearer, and `super_fold_with` doesn't
exist for most types.
- With the current model is easy to get confused and implement a
`super_fold_with` method that should be left defaulted. (Some of the
precursor commits fixed such cases.)
- With the current model it's easy to call `super_fold_with` within
`TypeFolder` impls where `fold_with` should be called. The new
approach makes this mistake impossible, and this commit fixes a number
of such cases.
- It's potentially faster, because it avoids the `fold_with` ->
`super_fold_with` call in all cases except types of interest. A lot of
the time the compile would inline those away, but not necessarily
always.
This change was made as per suspicion that this struct was never renamed after consistent use of DropCk.
This also clarifies the meaning behind the name of this structure.
This commit makes `AdtDef` use `Interned`. Much the commit is tedious
changes to introduce getter functions. The interesting changes are in
`compiler/rustc_middle/src/ty/adt.rs`.
Specifically, rename the `Const` struct as `ConstS` and re-introduce `Const` as
this:
```
pub struct Const<'tcx>(&'tcx Interned<ConstS>);
```
This now matches `Ty` and `Predicate` more closely, including using
pointer-based `eq` and `hash`.
Notable changes:
- `mk_const` now takes a `ConstS`.
- `Const` was copy, despite being 48 bytes. Now `ConstS` is not, so need a
we need separate arena for it, because we can't use the `Dropless` one any
more.
- Many `&'tcx Const<'tcx>`/`&Const<'tcx>` to `Const<'tcx>` changes
- Many `ct.ty` to `ct.ty()` and `ct.val` to `ct.val()` changes.
- Lots of tedious sigil fiddling.
The variant names are exported, so we can use them directly (possibly
with a `ty::` qualifier). Lots of places already do this, this commit
just increases consistency.
Specifically, change `Region` from this:
```
pub type Region<'tcx> = &'tcx RegionKind;
```
to this:
```
pub struct Region<'tcx>(&'tcx Interned<RegionKind>);
```
This now matches `Ty` and `Predicate` more closely.
Things to note
- Regions have always been interned, but we haven't been using pointer-based
`Eq` and `Hash`. This is now happening.
- I chose to impl `Deref` for `Region` because it makes pattern matching a lot
nicer, and `Region` can be viewed as just a smart wrapper for `RegionKind`.
- Various methods are moved from `RegionKind` to `Region`.
- There is a lot of tedious sigil changes.
- A couple of types like `HighlightBuilder`, `RegionHighlightMode` now have a
`'tcx` lifetime because they hold a `Ty<'tcx>`, so they can call `mk_region`.
- A couple of test outputs change slightly, I'm not sure why, but the new
outputs are a little better.
Specifically, change `Ty` from this:
```
pub struct Predicate<'tcx> { inner: &'tcx PredicateInner<'tcx> }
```
to this:
```
pub struct Predicate<'tcx>(&'tcx Interned<PredicateS<'tcx>>)
```
where `PredicateInner` is renamed as `PredicateS`.
This (plus a few other minor changes) makes the parallels with `Ty` and
`TyS` much clearer, and makes the uniqueness more explicit.
Specifically, change `Ty` from this:
```
pub type Ty<'tcx> = &'tcx TyS<'tcx>;
```
to this
```
pub struct Ty<'tcx>(Interned<'tcx, TyS<'tcx>>);
```
There are two benefits to this.
- It's now a first class type, so we can define methods on it. This
means we can move a lot of methods away from `TyS`, leaving `TyS` as a
barely-used type, which is appropriate given that it's not meant to
be used directly.
- The uniqueness requirement is now explicit, via the `Interned` type.
E.g. the pointer-based `Eq` and `Hash` comes from `Interned`, rather
than via `TyS`, which wasn't obvious at all.
Much of this commit is boring churn. The interesting changes are in
these files:
- compiler/rustc_middle/src/arena.rs
- compiler/rustc_middle/src/mir/visit.rs
- compiler/rustc_middle/src/ty/context.rs
- compiler/rustc_middle/src/ty/mod.rs
Specifically:
- Most mentions of `TyS` are removed. It's very much a dumb struct now;
`Ty` has all the smarts.
- `TyS` now has `crate` visibility instead of `pub`.
- `TyS::make_for_test` is removed in favour of the static `BOOL_TY`,
which just works better with the new structure.
- The `Eq`/`Ord`/`Hash` impls are removed from `TyS`. `Interned`s impls
of `Eq`/`Hash` now suffice. `Ord` is now partly on `Interned`
(pointer-based, for the `Equal` case) and partly on `TyS`
(contents-based, for the other cases).
- There are many tedious sigil adjustments, i.e. adding or removing `*`
or `&`. They seem to be unavoidable.
by using an opaque type obligation to bubble up comparisons between opaque types and other types
Also uses proper obligation causes so that the body id works, because out of some reason nll uses body ids for logic instead of just diagnostics.
Fix ICEs related to `Deref<Target=[T; N]>` on newtypes
1. Stash a const infer's type into the canonical var during canonicalization, so we can recreate the fresh const infer with that same type.
For example, given `[T; _]` we know `_` is a `usize`. If we go from infer => canonical => infer, we shouldn't forget that variable is a usize.
Fixes#92626Fixes#83704
2. Don't stash the autoderef'd slice type that we get from method lookup, but instead recreate it during method confirmation. We need to do this because the type we receive back after picking the method references a type variable that does not exist after probing is done.
Fixes#92637
... A better solution for the second issue would be to actually _properly_ implement `Deref` for `[T; N]` instead of fixing this autoderef hack to stop leaking inference variables. But I actually looked into this, and there are many complications with const impls.
Replace use of `ty()` on term and use it in more places. This will allow more flexibility in the
future, but slightly worried it allows items which are consts which only accept types.
ProjectionPredicate should be able to handle both associated types and consts so this adds the
first step of that. It mainly just pipes types all the way down, not entirely sure how to handle
consts, but hopefully that'll come with time.
Update chalk to 0.75.0
- Compute flags in `intern_ty`
- Remove `tracing-serde` from `PERMITTED_DEPENDENCIES`
- Bump `tracing-tree` to 0.2.0
- Bump `tracing-subscriber` to 0.3.3
This PR has several interconnected pieces:
1. In some of the NLL region error code, we now pass
around an `ObligationCause`, instead of just a plain `Span`.
This gets forwarded into `fulfill_cx.register_predicate_obligation`
during error reporting.
2. The general InferCtxt error reporting code is extended to
handle `ObligationCauseCode::BindingObligation`
3. A new enum variant `ConstraintCategory::Predicate` is added.
We try to avoid using this as the 'best blame constraint' - instead,
we use it to enhance the `ObligationCause` of the `BlameConstraint`
that we do end up choosing.
As a result, several NLL error messages now contain the same
"the lifetime requirement is introduced here" message as non-NLL
errors.
Having an `ObligationCause` available will likely prove useful
for future improvements to NLL error messages.
Be explicit about using Binder::dummy
This is somewhat of a late followup to the binder refactor PR. It removes `ToPredicate` and `ToPolyTraitImpls` that hide the use of `Binder::dummy`. While this does make code a bit more verbose, it allows us be more careful about where we create binders.
Another alternative here might be to add a new trait `ToBinder` or something with a `dummy()` fn. Which could still allow grepping but allows doing something like `trait_ref.dummy()` (but I also wonder if longer-term, it would be better to be even more explicit with a `bind_with_vars(ty::List::empty())` *but* that's not clear yet.
r? ``@nikomatsakis``
Matthew's work on improving NLL's "higher-ranked subtype error"s
This PR rebases `@matthewjasper's` [branch](https://github.com/matthewjasper/rust/tree/nll-hrtb-errors) which has great work to fix the obscure higher-ranked subtype errors that are tracked in #57374.
These are a blocker to turning full NLLs on, and doing some internal cleanups to remove some of the old region code.
The goal is so `@nikomatsakis` can take a look at this early, and I'll then do my best to help do the changes and followup work to land this work, and move closer to turning off the migration mode.
I've only updated the branch and made it compile, removed a warning or two.
r? `@nikomatsakis`
(Here's the [zulip topic to discuss this](https://rust-lang.zulipchat.com/#narrow/stream/122657-t-compiler.2Fwg-nll/topic/.2357374.3A.20improving.20higher-ranked.20subtype.20errors.20via.20.2386700) that Niko wanted)
rfc3052 followup: Remove authors field from Cargo manifests
Since RFC 3052 soft deprecated the authors field, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information for contributors, we may as well
remove it from crates in this repo.
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
During well-formed checking, we walk through all types 'nested' in
generic arguments. For example, WF-checking `Option<MyStruct<u8>>`
will cause us to check `MyStruct<u8>` and `u8`. However, this is done
on a `rustc_middle::ty::Ty`, which has no span information. As a result,
any errors that occur will have a very general span (e.g. the
definintion of an associated item).
This becomes a problem when macros are involved. In general, an
associated type like `type MyType = Option<MyStruct<u8>>;` may
have completely different spans for each nested type in the HIR. Using
the span of the entire associated item might end up pointing to a macro
invocation, even though a user-provided span is available in one of the
nested types.
This PR adds a framework for HIR-based well formed checking. This check
is only run during error reporting, and is used to obtain a more precise
span for an existing error. This is accomplished by individually
checking each 'nested' type in the HIR for the type, allowing us to
find the most-specific type (and span) that produces a given error.
The majority of the changes are to the error-reporting code. However,
some of the general trait code is modified to pass through more
information.
Since this has no soundness implications, I've implemented a minimal
version to begin with, which can be extended over time. In particular,
this only works for HIR items with a corresponding `DefId` (e.g. it will
not work for WF-checking performed within function bodies).
normalize mir::Constant differently from ty::Const in preparation for valtrees
Valtrees are unable to represent many kind of constant values (this is on purpose). For constants that are used at runtime, we do not need a valtree representation and can thus use a different form of evaluation. In order to make this explicit and less fragile, I added a `fold_constant` method to `TypeFolder` and implemented it for normalization. Normalization can now, when it wants to eagerly evaluate a constant, normalize `mir::Constant` directly into a `mir::ConstantKind::Val` instead of relying on the `ty::Const` evaluation.
In the future we can get rid of the `ty::Const` in there entirely and add our own `Unevaluated` variant to `mir::ConstantKind`. This would allow us to remove the `promoted` field from `ty::ConstKind::Unevaluated`, as promoteds can never occur in the type system.
cc `@rust-lang/wg-const-eval`
r? `@lcnr`
This currently creates a field which is always false on GenericParamDefKind for future use when
consts are permitted to have defaults
Update const_generics:default locations
Previously just ignored them, now actually do something about them.
Fix using type check instead of value
Add parsing
This adds all the necessary changes to lower const-generics defaults from parsing.
Change P<Expr> to AnonConst
This matches the arguments passed to instantiations of const generics, and makes it specific to
just anonymous constants.
Attempt to fix lowering bugs
Ensure valid TraitRefs are created for GATs
This fixes `ProjectionTy::trait_ref` to use the correct substs. Places that need all of the substs have been updated to not use `trait_ref`.
r? ````@jackh726````
Use debug log level for developer oriented logs
The information logged here is of limited general interest, while at the
same times makes it impractical to simply enable logging and share the
resulting logs due to the amount of the output produced.
Reduce log level from info to debug for developer oriented information.
For example, when building cargo, this reduces the amount of logs
generated by `RUSTC_LOG=info cargo build` from 265 MB to 79 MB.
Continuation of changes from 81350.
The information logged here is of limited general interest, while at the
same times makes it impractical to simply enable logging and share the
resulting logs due to the amount of the output produced.
Reduce log level from info to debug for developer oriented information.
For example, when building cargo, this reduces the amount of logs
generated by `RUSTC_LOG=info cargo build` from 265 MB to 79 MB.
Continuation of changes from 81350.
Introduce `TypeVisitor::BreakTy`
Implements MCP rust-lang/compiler-team#383.
r? `@ghost`
cc `@lcnr` `@oli-obk`
~~Blocked on FCP in rust-lang/compiler-team#383.~~
- Add more well-known traits
- Use the correct binders when lowering trait objects
- Use correct substs when lowering trait objects
- Use the correct binders for opaque_ty_data
- Lower negative impls with the correct polarity
- Supply associated type values
- Use `predicates_defined_on` for where clauses
This commit allows us to decide the number of captures required after
completing capture ananysis, which is required as part of implementing
RFC-2229.
Co-authored-by: Aman Arora <me@aman-arora.com>
Co-authored-by: Jenny Wills <wills.jenniferg@gmail.com>
