Emscripten: link with -sWASM_BIGINT
When linking an executable without dynamic linking, this is a pure improvement. It significantly reduces code size and avoids a lot of buggy behaviors. It is supported in all browsers for many years and in all maintained versions of Node.
It does change the ABI, so people who are dynamically linking with a library or executable that uses the old ABI may need to turn it off. It can be disabled if needed by passing `-Clink-arg -sWASM_BIGINT=0` to `rustc`. But few people will want to turn it off.
Note this includes a libc bump to 0.2.162!
When linking an executable without dynamic linking, this is a pure improvement.
It significantly reduces code size and avoids a lot of buggy behaviors. It is
supported in all browsers for many years and in all maintained versions of
Node.
It does change the ABI, so people who are dynamically linking with a library
or executable that uses the old ABI may need to turn it off. It can be disabled
if needed by passing `-Clink-arg -sWASM_BIGINT=0` to `rustc`. But few people
will want to turn it off.
For the `multivalue` and `reference-types` features this commit is
similar to #117457 in that it's stabilizing target features specific to
WebAssembly targets. The previous PR left out these two features because
they weren't expected to change much about compiled code so it was
unclear what the rationale was. It has [since been discovered][blog]
that `reference-types` can be useful as it changes the binary format of
the `call_indirect` instruction. Additionally [on Zulip][zulip] there's
a use case of detecting these features at compile time and generating a
compile error to better warn users about features not supported on
engines.
This PR then additionally adds the `tail-call` feature which corresponds
to the [tail-call] proposal to WebAssembly. This feature advanced to
"phase 4" in the WebAssembly CG awhile back and has been supported in
LLVM for quite some time now. Engines are finishing up implementations
or have already shipped implementations, so while this is a bit of a
late addition to Rust itself it reflects the current status of
WebAssembly's state of the feature.
A test has been added here not only for these features but other
WebAssembly features as well to showcase that they're usable without
feature gates in stable Rust.
[blog]: https://blog.rust-lang.org/2024/09/24/webassembly-targets-change-in-default-target-features.html
[zulip]: https://rust-lang.zulipchat.com/#narrow/stream/122651-general/topic/wasm32.20reference-types.20.2F.20multivalue.20in.201.2E82-beta.20not.20enabled/near/473893987
[tail-call]: https://github.com/webassembly/tail-call
Emit warning when calling/declaring functions with unavailable vectors.
On some architectures, vector types may have a different ABI depending on whether the relevant target features are enabled. (The ABI when the feature is disabled is often not specified, but LLVM implements some de-facto ABI.)
As discussed in rust-lang/lang-team#235, this turns out to very easily lead to unsound code.
This commit makes it a post-monomorphization future-incompat warning to declare or call functions using those vector types in a context in which the corresponding target features are disabled, if using an ABI for which the difference is relevant. This ensures that these functions are always called with a consistent ABI.
See the [nomination comment](https://github.com/rust-lang/rust/pull/127731#issuecomment-2288558187) for more discussion.
Part of #116558
r? RalfJung
rustc_target: more target string fixes for LLVM 20
LLVM continues to clean these up, and we continue to make this consistent. This is similar to 9caced7bad and e985396145.
`@rustbot` label: +llvm-main
pointee_info_at: fix logic for recursing into enums
Fixes https://github.com/rust-lang/rust/issues/131834
The logic in `pointee_info_at` was likely written at a time when the null pointer optimization was the *only* enum layout optimization -- and as `Variant::Multiple` kept getting expanded, nobody noticed that the logic is now unsound.
The job of this function is to figure out whether there is a dereferenceable-or-null and aligned pointer at a given offset inside a type. So when we recurse into a multi-variant enum, we better make sure that all the other enum variants must be null! This is the part that was forgotten, and this PR adds it.
The reason this didn't explode in many ways so far is that our references only have 1 niche value (null), so it's not possible on stable to have a multi-variant enum with a dereferenceable pointer and other enum variants that are not null. But with `rustc_layout_scalar_valid_range` attributes one can force such a layout, and if `@the8472's` work on alignment niches ever lands, that will make this possible on stable.
Basic inline assembly support for SPARC and SPARC64
This implements asm_experimental_arch (tracking issue https://github.com/rust-lang/rust/issues/93335) for SPARC and SPARC64.
This PR includes:
- General-purpose registers `r[0-31]` (`reg` register class, LLVM/GCC constraint `r`)
Supported types: i8, i16, i32, i64 (SPARC64-only)
Aliases: `g[0-7]` (`r[0-7]`), `o[0-7]` (`r[8-15]`), `l[0-7]` (`r[16-23]`), `i[0-7]` (`r[24-31]`)
- `y` register (clobber-only, needed for clobber_abi)
- preserves_flags: Integer condition codes (`icc`, `xcc`) and floating-point condition codes (`fcc*`)
The following are *not* included:
- 64-bit integer support on SPARC-V8+'s global or out registers (`g[0-7]`, `o[0-7]`): GCC's `h` constraint (it seems that there is no corresponding constraint in LLVM?)
- Floating-point registers (LLVM/GCC constraint `e`/`f`):
I initially tried to implement this, but postponed it for now because there seemed to be several parts in LLVM that behaved differently than in the LangRef's description.
- clobber_abi: Support for floating-point registers is needed.
Refs:
- LLVM
- Reserved registers https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/Sparc/SparcRegisterInfo.cpp#L52
- Register definitions https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/Sparc/SparcRegisterInfo.td
- Supported constraints https://llvm.org/docs/LangRef.html#supported-constraint-code-list
- GCC
- Reserved registers 63b6967b06/gcc/config/sparc/sparc.h (L633-L658)
- Supported constraints https://gcc.gnu.org/onlinedocs/gcc/Machine-Constraints.html
- SPARC ISA/ABI
- (64-bit ISA) The SPARC Architecture Manual, Version 9
(32-bit ISA) The SPARC Architecture Manual, Version 8
(64-bit ABI) System V Application Binary Interface SPARC Version 9 Processor Supplement, Rev 1.35
(32-bit ABI) System V Application Binary Interface SPARC Processor Supplement, Third Edition
The above docs can be downloaded from https://sparc.org/technical-documents
- (32-bit V8+ ABI) The V8+ Technical Specification
https://temlib.org/pub/SparcStation/Standards/V8plus.pdf
cc `@thejpster` (sparc-unknown-none-elf target maintainer)
(AFAIK, other sparc/sprac64 targets don't have target maintainers)
r? `@Amanieu`
`@rustbot` label +O-SPARC +A-inline-assembly
Remove unused intercrate dependencies
Checked by enabling `-Wunused-crate-dependencies`
`driver_impl` still depends on `index` to forward the `rustc_randomized_layouts` feature, and `rustc_main` depends on several unused crates for sysroot reasons
r? compiler
Remove the `wasm32-wasi` target from rustc
This commit is the final step in the journey of renaming the historical `wasm32-wasi` target in the Rust compiler to `wasm32-wasip1`. Various steps in this journey so far have been:
* 2023-04-03: rust-lang/compiler-team#607 - initial proposal for this rename
* 2024-11-27: rust-lang/compiler-team#695 - amended schedule/procedure for rename
* 2024-01-29: rust-lang/rust#120468 - initial introduction of `wasm32-wasip1`
* 2024-06-18: rust-lang/rust#126662 - warn on usage of `wasm32-wasi`
* 2024-11-08: this PR - remove the `wasm32-wasi` target
The full transition schedule is in [this comment][comment] and is summarized with:
* 2024-05-02: Rust 1.78 released with `wasm32-wasip1` target
* 2024-09-05: Rust 1.81 released warning on usage of `wasm32-wasi`
* 2025-01-09: Rust 1.84 to be released without the `wasm32-wasi` target
This means that support on stable for the replacement target of `wasm32-wasip1` has currently been available for 6 months. Users have already seen warnings on stable for 2 months about usage of `wasm32-wasi` and stable users have another 2 months of warnings before the target is removed from stable.
This commit is intended to be the final step in this transition so the source tree should no longer mention `wasm32-wasi` except in historical reference to the older name of the `wasm32-wasip1` target.
[comment]: https://github.com/rust-lang/rust/pull/120468#issuecomment-1977878747
Add a new `wide-arithmetic` feature for WebAssembly
This commit adds a new rustc target feature named `wide-arithmetic` for WebAssembly targets. This corresponds to the [wide-arithmetic] proposal for WebAssembly which adds new instructions catered towards accelerating integer arithmetic larger than 64-bits. This proposal to WebAssembly is not standard yet so this new feature is flagged as an unstable target feature. Additionally Rust's LLVM version doesn't support this new feature yet since support will first be added in LLVM 20, so the feature filtering logic for LLVM is updated to handle this.
I'll also note that I'm not currently planning to add wasm-specific intrinsics to `std::arch::wasm32` at this time. The currently proposed instructions are all accessible through `i128` or `u128`-based operations which Rust already supports, so intrinsic shouldn't be necessary to get access to these new instructions.
[wide-arithmetic]: https://github.com/WebAssembly/wide-arithmetic
mark some target features as 'forbidden' so they cannot be (un)set with -Ctarget-feature
The context for this is https://github.com/rust-lang/rust/issues/116344: some target features change the way floats are passed between functions. Changing those target features is unsound as code compiled for the same target may now use different ABIs.
So this introduces a new concept of "forbidden" target features (on top of the existing "stable " and "unstable" categories), and makes it a hard error to (un)set such a target feature. For now, the x86 and ARM feature `soft-float` is on that list. We'll have to make some effort to collect more relevant features, and similar features from other targets, but that can happen after the basic infrastructure for this landed. (These features are being collected in https://github.com/rust-lang/rust/issues/131799.)
I've made this a warning for now to give people some time to speak up if this would break something.
MCP: https://github.com/rust-lang/compiler-team/issues/780
Support clobber_abi and vector registers (clobber-only) in PowerPC inline assembly
This supports `clobber_abi` which is one of the requirements of stabilization mentioned in #93335.
This basically does a similar thing I did in https://github.com/rust-lang/rust/pull/130630 to implement `clobber_abi` for s390x, but for powerpc/powerpc64/powerpc64le.
- This also supports vector registers (as `vreg`) as clobber-only, which need to support clobbering of them to implement `clobber_abi`.
- `vreg` should be able to accept `#[repr(simd)]` types as input/output if the unstable `altivec` target feature is enabled, but `core::arch::{powerpc,powerpc64}` vector types, `#[repr(simd)]`, and `core::simd` are all unstable, so the fact that this is currently a clobber-only should not be considered a blocker of clobber_abi implementation or stabilization. So I have not implemented it in this PR.
- See https://github.com/rust-lang/rust/pull/131551 (which is based on this PR) for a PR to implement this.
- (I'm not sticking to whether that PR should be a separate PR or part of this PR, so I can merge that PR into this PR if needed.)
Refs:
- PPC32 SysV: Section "Function Calling Sequence" in [System V Application Binary Interface PowerPC Processor Supplement](https://refspecs.linuxfoundation.org/elf/elfspec_ppc.pdf)
- PPC64 ELFv1: Section 3.2 "Function Calling Sequence" in [64-bit PowerPC ELF Application Binary Interface Supplement](https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.html#FUNC-CALL)
- PPC64 ELFv2: Section 2.2 "Function Calling Sequence" in [64-Bit ELF V2 ABI Specification](https://openpowerfoundation.org/specifications/64bitelfabi/)
- AIX: [Register usage and conventions](https://www.ibm.com/docs/en/aix/7.3?topic=overview-register-usage-conventions), [Special registers in the PowerPC®](https://www.ibm.com/docs/en/aix/7.3?topic=overview-special-registers-in-powerpc), [AIX vector programming](https://www.ibm.com/docs/en/aix/7.3?topic=concepts-aix-vector-programming)
- Register definition in LLVM: https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/PowerPC/PPCRegisterInfo.td#L189
If I understand the above four ABI documentations correctly, except for the PPC32 SysV's VR (Vector Registers) and 32-bit AIX (currently not supported by rustc)'s r13, there does not appear to be important differences in terms of implementing `clobber_abi`:
- The above four ABIs are consistent about FPR (0-13: volatile, 14-31: nonvolatile), CR (0-1,5-7: volatile, 2-4: nonvolatile), XER (volatile), and CTR (volatile).
- As for GPR, only the registers we are treating as reserved are slightly different
- r0, r3-r12 are volatile
- r1(sp, reserved), r14-31 are nonvolatile
- r2(reserved) is TOC pointer in PPC64 ELF/AIX, system-reserved register in PPC32 SysV (AFAIK used as thread pointer in Linux/BSDs)
- r13(reserved for non-32-bit-AIX) is thread pointer in PPC64 ELF, small data area pointer register in PPC32 SysV, "reserved under 64-bit environment; not restored across system calls[^r13]" in AIX)
- As for FPSCR, volatile in PPC64 ELFv1/AIX, some fields are volatile only in certain situations (rest are volatile) in PPC32 SysV/PPC64 ELFv2.
- As for VR (Vector Registers), it is not mentioned in PPC32 SysV, v0-v19 are volatile in both in PPC64 ELF/AIX, v20-v31 are nonvolatile in PPC64 ELF, reserved or nonvolatile depending on the ABI ([vec-extabi vs vec-default in LLVM](https://reviews.llvm.org/D89684), we are [using vec-extabi](https://github.com/rust-lang/rust/pull/131341#discussion_r1797693299)) in AIX:
> When the default Vector enabled mode is used, these registers are reserved and must not be used.
> In the extended ABI vector enabled mode, these registers are nonvolatile and their values are preserved across function calls
I left [FIXME comment about PPC32 SysV](https://github.com/rust-lang/rust/pull/131341#discussion_r1790496095) and added ABI check for AIX.
- As for VRSAVE, it is not mentioned in PPC32 SysV, nonvolatile in PPC64 ELFv1, reserved in PPC64 ELFv2/AIX
- As for VSCR, it is not mentioned in PPC32 SysV/PPC64 ELFv1, some fields are volatile only in certain situations (rest are volatile) in PPC64 ELFv2, volatile in AIX
We are currently treating r1-r2, r13 (non-32-bit-AIX), r29-r31, LR, CTR, and VRSAVE as reserved.
We are currently not processing anything about FPSCR and VSCR, but I feel those are things that should be processed by `preserves_flags` rather than `clobber_abi` if we need to do something about them. (However, PPCRegisterInfo.td in LLVM does not seem to define anything about them.)
Replaces #111335 and #124279
cc `@ecnelises` `@bzEq` `@lu-zero`
r? `@Amanieu`
`@rustbot` label +O-PowerPC +A-inline-assembly
[^r13]: callee-saved, according to [LLVM](6a6af0246b/llvm/lib/Target/PowerPC/PPCCallingConv.td (L322)) and [GCC](a9173a50e7/gcc/config/rs6000/rs6000.h (L859)).
This commit is the final step in the journey of renaming the historical
`wasm32-wasi` target in the Rust compiler to `wasm32-wasip1`. Various
steps in this journey so far have been:
* 2023-04-03: rust-lang/compiler-team#607 - initial proposal for this rename
* 2024-11-27: rust-lang/compiler-team#695 - amended schedule/procedure for rename
* 2024-01-29: rust-lang/rust#120468 - initial introduction of `wasm32-wasip1`
* 2024-06-18: rust-lang/rust#126662 - warn on usage of `wasm32-wasi`
* 2024-11-08: this PR - remove the `wasm32-wasi` target
The full transition schedule is in [this comment][comment] and is
summarized with:
* 2024-05-02: Rust 1.78 released with `wasm32-wasip1` target
* 2024-09-05: Rust 1.81 released warning on usage of `wasm32-wasi`
* 2025-01-09: Rust 1.84 to be released without the `wasm32-wasi` target
This means that support on stable for the replacement target of
`wasm32-wasip1` has currently been available for 6 months. Users have
already seen warnings on stable for 2 months about usage of
`wasm32-wasi` and stable users have another 2 months of warnings before
the target is removed from stable.
This commit is intended to be the final step in this transition so the
source tree should no longer mention `wasm32-wasi` except in historical
reference to the older name of the `wasm32-wasip1` target.
[comment]: https://github.com/rust-lang/rust/pull/120468#issuecomment-1977878747
Move versioned Apple LLVM targets from `rustc_target` to `rustc_codegen_ssa`
Fully specified LLVM targets contain the OS version on macOS/iOS/tvOS/watchOS/visionOS, and this version depends on the deployment target environment variables like `MACOSX_DEPLOYMENT_TARGET`, `IPHONEOS_DEPLOYMENT_TARGET` etc.
We would like to move this to later in the compilation pipeline, both because it feels impure to access environment variables when fetching target information, but mostly because we need access to more information from https://github.com/rust-lang/rust/pull/130883 to do https://github.com/rust-lang/rust/issues/118204. See also https://github.com/rust-lang/rust/pull/129342#issuecomment-2335156119 for some discussion.
The first and second commit does the actual refactor, it should be a non-functional change, the third commit adds diagnostics for invalid deployment targets, which are now possible to do because we have access to the session.
Tested with the same commands as in https://github.com/rust-lang/rust/pull/130435.
r? ``````@petrochenkov``````
On some architectures, vector types may have a different ABI depending
on whether the relevant target features are enabled. (The ABI when the
feature is disabled is often not specified, but LLVM implements some
de-facto ABI.)
As discussed in rust-lang/lang-team#235, this turns out to very easily
lead to unsound code.
This commit makes it a post-monomorphization future-incompat warning to
declare or call functions using those vector types in a context in which
the corresponding target features are disabled, if using an ABI for
which the difference is relevant. This ensures that these functions are
always called with a consistent ABI.
See the [nomination comment](https://github.com/rust-lang/rust/pull/127731#issuecomment-2288558187)
for more discussion.
Part of #116558
The OS version depends on the deployment target environment variables,
the access of which we want to move to later in the compilation pipeline
that has access to more information, for example `env_depinfo`.
llvm: Match new LLVM 128-bit integer alignment on sparc
LLVM continues to align more 128-bit integers to 128-bits in the data layout rather than relying on the high level language to do it. Update SPARC target files to match and add a backcompat replacement for current LLVMs.
See llvm/llvm-project#106951 for details
`@rustbot` label: +llvm-main
r? `@durin42`
(Please wait for the LLVM CI to come back before approving), creating this PR to get it tested there.
compiler: Move `rustc_target::spec::abi::Abi` to `rustc_abi::ExternAbi`
Lift `enum Abi` from its rather odd place in the middle of rustc_target, and make it available again from rustc_abi. You know, the crate where you would expect the enum that describes all the ABIs to be? The platform-neutral ones, at least. This will help further refactoring of how we handle ABIs in the near future[^0].
Rename `Abi` to `ExternAbi` because quite a lot of the compiler overloads the concept of "ABI" enough that the existing name is imprecise and it is often renamed _anyway_. Often this was to avoid conflicts with the *other* type formerly known as `Abi` (now named BackendRepr[^1]), but sometimes it is just for clarity, and this name seems more self-explanatory. It does get reexported, though, using its old name, to reduce the odds of merge-conflicting over the entire tree.
All of `ExternAbi`'s friends come along for the ride, which costs adding some optional dependencies to the rustc_abi crate. However, all of this also allows simply moving three crates entirely off rustc_target:
- rustc_hir_pretty
- rustc_lint_defs
- rustc_mir_build
This odd selection is mostly to demonstrate a secondary motivation: The majority of the front-end of the compiler should be as target-agnostic as possible, and it is easier to assure this if they simply don't depend on the crate that describes targets. Note that I didn't migrate crates that don't benefit from it in this way yet, and I didn't survey every last crate.
[^0]: This is being undertaken as part of https://github.com/rust-lang/rust/issues/119183
[^1]: https://github.com/rust-lang/rust/pull/132246
Fix `target_os` for `mipsel-sony-psx`
Previously set to `target_os = "none"` and `target_env = "psx"` in [the PR introducing the target](https://github.com/rust-lang/rust/pull/102689/), but although the Playstation 1 is _close_ to a bare metal target in some regards, it's still very much an operating system, so we should instead set `target_os = "psx"`.
This also matches the `mipsel-sony-psp` target, which sets `target_os = "psp"`.
CC target maintainer ``@ayrtonm.``
If there's any code out there that uses `cfg(target_env = "psx")`, they can use `cfg(any(target_os = "psx", target_env = "psx"))` until they bump their MSRV to a version where this is fully fixed.
LLVM continues to align more 128-bit integers to 128-bits in the data
layout rather than relying on the high level language to do it. Update
SPARC target files to match and add a backcompat replacement for current
LLVMs.
See llvm/llvm-project#106951 for details
Add `lp64e` RISC-V ABI
This PR adds support for the `lp64e` RISC-V ABI, which is the 64-bit equivalent of the `ilp32e` ABI that is already supported.
For reference, this ABI was originally added to LLVM in [this PR](https://reviews.llvm.org/D70401).
The initial naming of "Abi" was an awful mistake, conveying wrong ideas
about how psABIs worked and even more about what the enum meant.
It was only meant to represent the way the value would be described to
a codegen backend as it was lowered to that intermediate representation.
It was never meant to mean anything about the actual psABI handling!
The conflation is because LLVM typically will associate a certain form
with a certain ABI, but even that does not hold when the special cases
that actually exist arise, plus the IR annotations that modify the ABI.
Reframe `rustc_abi::Abi` as the `BackendRepr` of the type, and rename
`BackendRepr::Aggregate` as `BackendRepr::Memory`. Unfortunately, due to
the persistent misunderstandings, this too is now incorrect:
- Scattered ABI-relevant code is entangled with BackendRepr
- We do not always pre-compute a correct BackendRepr that reflects how
we "actually" want this value to be handled, so we leave the backend
interface to also inject various special-cases here
- In some cases `BackendRepr::Memory` is a "real" aggregate, but in
others it is in fact using memory, and in some cases it is a scalar!
Our rustc-to-backend lowering code handles this sort of thing right now.
That will eventually be addressed by lifting duplicated lowering code
to either rustc_codegen_ssa or rustc_target as appropriate.
This commit adds a new rustc target feature named `wide-arithmetic` for
WebAssembly targets. This corresponds to the [wide-arithmetic] proposal
for WebAssembly which adds new instructions catered towards accelerating
integer arithmetic larger than 64-bits. This proposal to WebAssembly is
not standard yet so this new feature is flagged as an unstable target
feature. Additionally Rust's LLVM version doesn't support this new
feature yet since support will first be added in LLVM 20, so the
feature filtering logic for LLVM is updated to handle this.
I'll also note that I'm not currently planning to add wasm-specific
intrinsics to `std::arch::wasm32` at this time. The currently proposed
instructions are all accessible through `i128` or `u128`-based
operations which Rust already supports, so intrinsic shouldn't be
necessary to get access to these new instructions.
[wide-arithmetic]: https://github.com/WebAssembly/wide-arithmetic
