There's currently a deadlock with tracing when RUSTC_LOG is enabled.
Downgrade tracing-core for now to avoid blocking the other updates.
syns upgrades cause some nontrivial changes in the diagnostics derive tests,
which are best dealt with in another PR.
Validate fluent variable references in tests
Closes#101109
Under `cfg(test)`, the `fluent_messages` macro will emit a list of variables referenced by each message and its attributes. The derive attribute will now emit a `#[test]` that checks that each referenced variable exists in the structure it's applied to.
Fluent, with all the icu4x it brings in, takes quite some time to
compile. `fluent_messages!` is only needed in further downstream rustc
crates, but is blocking more upstream crates like `rustc_index`. By
splitting it out, we allow `rustc_macros` to be compiled earlier, which
speeds up `x check compiler` by about 5 seconds (and even more after the
needless dependency on `serde_json` is removed from
`rustc_data_structures`).
Remove `remap_env_constness` in queries
This removes some of the complexities with const traits. #88119 used to be caused by this but was fixed by `param_env = param_env.without_const()`.
Migrate most of `rustc_builtin_macros` to diagnostic impls
cc #100717
This is a couple of days work, but I decided to stop for now before the PR becomes too big. There's around 50 unresolved failures when `rustc::untranslatable_diagnostic` is denied, which I'll finish addressing once this PR goes thtough
A couple of outputs have changed, but in all instances I think the changes are an improvement/are more consistent with other diagnostics (although I'm happy to revert any which seem worse)
Remove type-traversal trait aliases
#107924 moved the type traversal (folding and visiting) traits into the type library, but created trait aliases in `rustc_middle` to minimise both the API churn for trait consumers and the arising boilerplate. As mentioned in that PR, an alternative approach of defining subtraits with blanket implementations of the respective supertraits was also considered at that time but was ruled out as not adding much value.
Unfortunately, it has since emerged that rust-analyzer has difficulty with these trait aliases at present, resulting in a degraded contributor experience (see the recent [r-a has become useless](https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/r-a.20has.20become.20useless) topic on the #t-compiler/help Zulip stream).
This PR removes the trait aliases, and accordingly the underlying type library traits are now used directly; they are parameterised by `TyCtxt<'tcx>` rather than just the `'tcx` lifetime, and imports have been updated to reflect the fact that the trait aliases' explicitly named traits are no longer automatically brought into scope. These changes also roll-back the (no-longer required) workarounds to #107747 that were made in b409329c62.
Since this PR is just a find+replace together with the changes necessary for compilation & tidy to pass, it's currently just one mega-commit. Let me know if you'd like it broken up.
r? `@oli-obk`
Instead of loading the Fluent resources for every crate in
`rustc_error_messages`, each crate generates typed identifiers for its
own diagnostics and creates a static which are pulled together in the
`rustc_driver` crate and provided to the diagnostic emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
Switching them to `Break(())` and `Continue(())` instead.
libs-api would like to remove these constants, so stop using them in compiler to make the removal PR later smaller.
Convert all the crates that have had their diagnostic migration
completed (except save_analysis because that will be deleted soon and
apfloat because of the licensing problem).
Improve syntax of `newtype_index`
This makes it more like proper Rust and also makes the implementation a lot simpler.
Mostly just turns weird flags in the body into proper attributes.
It should probably also be converted to an attribute macro instead of function-like, but that can be done in a future PR.
Remove the `..` from the body, only a few invocations used it and it's
inconsistent with rust syntax.
Use `;` instead of `,` between consts. As the Rust syntax gods inteded.
This removes the `custom` format functionality as its only user was
trivially migrated to using a normal format.
If a new use case for a custom formatting impl pops up, you can add it
back.
feed resolver_for_lowering instead of storing it in a field
r? `@cjgillot`
opening this as
* a discussion for `no_hash` + `feedable` queries. I think we'll want those, but I don't quite understand why they are rejected beyond a double check of the stable hashes for situations where the query is fed but also read from incremental caches.
* and a discussion on removing all untracked fields from TyCtxt and setting it up so that they are fed queries instead
Manually implement PartialEq for Option<T> and specialize non-nullable types
This PR manually implements `PartialEq` and `StructuralPartialEq` for `Option`, which seems to produce slightly better codegen than the automatically derived implementation.
It also allows specializing on the `core::num::NonZero*` and `core::ptr::NonNull` types, taking advantage of the niche optimization by transmuting the `Option<T>` to `T` to be compared directly, which can be done in just two instructions.
A comparison of the original, new and specialized code generation is available [here](https://godbolt.org/z/dE4jxdYsa).
Change #[suggestion_*] attributes to use style="..."
As discussed [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20tool_only_span_suggestion), this changes `#[(multipart_)suggestion_{short,verbose,hidden}(...)]` attributes to plain `#[(multipart_)suggestion(...)]` attributes with a `style = "{short,verbose,hidden}"` parameter.
It also adds a new style, `tool-only`, that corresponds to `tool_only_span_suggestion`/`tool_only_multipart_suggestion` and causes the suggestion to not be shown in human-readable output at all.
Best reviewed commit-by-commit, there's a bit of noise in there.
cc #100717 `@compiler-errors`
r? `@davidtwco`
Track where diagnostics were created.
This implements the `-Ztrack-diagnostics` flag, which uses `#[track_caller]` to track where diagnostics are created. It is meant as a debugging tool much like `-Ztreat-err-as-bug`.
For example, the following code...
```rust
struct A;
struct B;
fn main(){
let _: A = B;
}
```
...now emits the following error message:
```
error[E0308]: mismatched types
--> src\main.rs:5:16
|
5 | let _: A = B;
| - ^ expected struct `A`, found struct `B`
| |
| expected due to this
-Ztrack-diagnostics: created at compiler\rustc_infer\src\infer\error_reporting\mod.rs:2275:31
```
This allows porting uses of span_suggestions() to diagnostic structs.
Doesn't work for multipart_suggestions() because the rank would be
reversed - the struct would specify multiple spans, each of which has
multiple possible replacements, while multipart_suggestions() creates
multiple possible replacements, each with multiple spans.
Sometimes it is convenient to return a subdiagnostic enum where one or
more of the variants don't add anything to the diagnostic.
Signed-off-by: David Wood <david.wood@huawei.com>
Documentation comments shouldn't affect the diagnostic derive in any
way, but explicit support has to be added for ignoring the `doc`
attribute.
Signed-off-by: David Wood <david.wood@huawei.com>
Queries can provide an arbitrary expression for their description and
their caching behavior. Before, these expressions where stored in a
`rustc_query_description` macro emitted by the `rustc_queries` macro,
and then used in `rustc_query_impl` to fill out the methods for the
`QueryDescription` trait.
Instead, we now emit two new modules from `rustc_queries` containing the
functions with the expressions. `rustc_query_impl` calls these functions
now instead of invoking the macro.
Since we are now defining some of the functions in
`rustc_middle::query`, we now need all the imports for the key types
there as well.
Following the approach taken in earlier commits to separate formatting
initialization from use in the subdiagnostic derive, simplify the
diagnostic derive by removing the field-ordering logic that previously
solved this problem.
Signed-off-by: David Wood <david.wood@huawei.com>
Diagnostic derives have previously had to take special care when
ordering the generated code so that fields were not used after a move.
This is unlikely for most fields because a field is either annotated
with a subdiagnostic attribute and is thus likely a `Span` and copiable,
or is a argument, in which case it is only used once by `set_arg`
anyway.
However, format strings for code in suggestions can result in fields
being used after being moved if not ordered carefully. As a result, the
derive currently puts `set_arg` calls last (just before emission), such
as:
```rust
let diag = { /* create diagnostic */ };
diag.span_suggestion_with_style(
span,
fluent::crate::slug,
format!("{}", __binding_0),
Applicability::Unknown,
SuggestionStyle::ShowAlways
);
/* + other subdiagnostic additions */
diag.set_arg("foo", __binding_0);
/* + other `set_arg` calls */
diag.emit();
```
For eager translation, this doesn't work, as the message being
translated eagerly can assume that all arguments are available - so
arguments _must_ be set first.
Format strings for suggestion code are now separated into two parts - an
initialization line that performs the formatting into a variable, and a
usage in the subdiagnostic addition.
By separating these parts, the initialization can happen before
arguments are set, preserving the desired order so that code compiles,
while still enabling arguments to be set before subdiagnostics are
added.
```rust
let diag = { /* create diagnostic */ };
let __code_0 = format!("{}", __binding_0);
/* + other formatting */
diag.set_arg("foo", __binding_0);
/* + other `set_arg` calls */
diag.span_suggestion_with_style(
span,
fluent::crate::slug,
__code_0,
Applicability::Unknown,
SuggestionStyle::ShowAlways
);
/* + other subdiagnostic additions */
diag.emit();
```
Signed-off-by: David Wood <david.wood@huawei.com>
Add support for `eager` argument to the `subdiagnostic` attribute which
generates a call to `eager_subdiagnostic`.
Signed-off-by: David Wood <david.wood@huawei.com>
`AddToDiagnostic::add_to_diagnostic_with` is similar to the previous
`AddToDiagnostic::add_to_diagnostic` but takes a function that can be
used by the caller to modify diagnostic messages originating from the
subdiagnostic (such as performing translation eagerly).
`add_to_diagnostic` now just calls `add_to_diagnostic_with` with an
empty closure.
Signed-off-by: David Wood <david.wood@huawei.com>
In #102306, `rustc_typeck` was renamed to `rustc_hir_analysis` but the
diagnostic resources were not renamed - which is what this commit
changes.
Signed-off-by: David Wood <david.wood@huawei.com>
macros: diagnostic derive on enums
Part of #100717.
Extends `#[derive(Diagnostic)]` to work on enums too where each variant acts like a distinct diagnostic - being able to represent diagnostics this way can be quite a bit simpler for some parts of the compiler.
r? `@compiler-errors`
cc `@Xiretza`
FIX - ambiguous Diagnostic link in docs
UPDATE - rename diagnostic_items to IntoDiagnostic and AddToDiagnostic
[Gardening] FIX - formatting via `x fmt`
FIX - rebase conflicts. NOTE: Confirm wheather or not we want to handle TargetDataLayoutErrorsWrapper this way
DELETE - unneeded allow attributes in Handler method
FIX - broken test
FIX - Rebase conflict
UPDATE - rename residual _SessionDiagnostic and fix LintDiag link
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
Further simplify the macros generated by `rustc_queries`
This doesn't actually move anything outside the macros, but it makes them simpler to read.
- Add a new `rustc_query_names` macro. This allows a much simpler syntax for the matchers in the macros passed to it as a callback.
- Convert `define_dep_nodes` and `alloc_once` to use `rustc_query_names`. This is possible because they only use the names
(despite the quite complicated matchers in `define_dep_nodes`, none of the other arguments are used).
- Get rid of `rustc_dep_node_append`.
r? `@cjgillot`
We want to refer to `crate::plumbing::try_load_from_disk` in the const, but hard-coding it in
rustc_queries, where we don't yet know the crate this macro will be called in, seems kind of hacky.
Do it in query_impl instead.
In practice, it was only ever used with `ArenaCacheSelector`. Change it to a single boolean
`arena_cache` rather than allowing queries to specify an arbitrary type.
- Add a new `rustc_query_names` macro. This allows a much simpler syntax for the matchers in the macros passed to it as a callback.
- Convert `define_dep_nodes` and `alloc_once` to use `rustc_query_names`. This is possible because they only use the names
(despite the quite complicated matchers in `define_dep_nodes`, none of the other arguments are used).
- Get rid of `rustc_dep_node_append`.
Suggested by the team in this Zulip Topic https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20SessionDiagnostic.20on.20Handler
Handler already has almost all the capabilities of ParseSess when it comes to diagnostic emission, in this migration we only needed to add the ability to access source_map from the emitter in order to get a Snippet and the start_point. Not sure if this is the best way to address this gap
This reimplements ac638c1, which had to be reverted in the previous
commit because it contains a rebase accident that itself reverted
significant unrelated changes to SessionSubdiagnostic.
This reverts parts of commit ac638c1f5f.
During rebase, this commit accidentally reverted unrelated changes to
the subdiagnostic derive (those allowing multipart_suggestions to be
derived). This commit reverts all changes to the subdiagnostic code made
in ac638c1f5f, the next commit will reintroduce the actually intended
changes.
translations: rename warn_ to warning
## Description
This MR renames the the macro `warn_` to `warning`.
To give a little bit of context, as [explained](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20diag.20translation/near/295074146) by ```````@davidtwco``````` in the Zulip channel, `warn_` was named like that because the keyword `warn` is a built-in attribute and at the time this macro was created the word `warning` was also
taken.
However, it is no longer the case and we can rename `warn_` to `warning`.
Simplify the arguments to macros generated by the `rustc_queries` proc macro
Very small cleanup. Based on https://github.com/rust-lang/rust/pull/100436 which modifies some of the same code.
r? `@cjgillot`
add `depth_limit` in `QueryVTable` to avoid entering a new tcx in `layout_of`
Fixes#49735
Updates #48685
The `layout_of` query needs to check whether it overflows the depth limit, and the current implementation needs to create a new `ImplicitCtxt` inside `layout_of`. However, `start_query` will already create a new `ImplicitCtxt`, so we can check the depth limit in `start_query`.
We can tell whether we need to check the depth limit simply by whether the return value of `to_debug_str` of the query is `layout_of`. But I think adding the `depth_limit` field in `QueryVTable` may be more elegant and more scalable.
The macro warn_ was named like that because it the
keyword warn is a built-in attribute and at the time
this macro was created the word 'warning' was also
taken.
However it is no longer the case and we can rename
warn_ to warning.
- Disallow multiple macros callbacks in the same invocation. In practice, this was never used.
- Remove the `[]` brackets around the macro name
- Require an `ident`, not an arbitrary `tt`
fluent: mandate slug names to be prefixed by crate name
This is currently only convention, but not actively checked for.
Additionally, improve error messages to highlight the path of the offending fluent file rather than the identifier preceding it.
This will conflict with #100671, so I'll leave it as draft until that's merged.
Example error before:
error: name `generic_does_not_live_long_enough` does not start with the crate name
--> compiler/rustc_error_messages/src/lib.rs:33:17
|
33 | borrowck => "../locales/en-US/borrowck.ftl",
| ^^^^^^^^
|
= help: prepend `borrowck_` to the slug name: `borrowck_generic_does_not_live_long_enough`
after:
error: name `generic_does_not_live_long_enough` does not start with the crate name
--> compiler/rustc_error_messages/src/lib.rs:33:17
|
33 | borrowck => "../locales/en-US/borrowck.ftl",
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: prepend `borrowck_` to the slug name: `borrowck_generic_does_not_live_long_enough`
Deriving SessionDiagnostic on a type no longer forces that diagnostic to
be one of warning, error, or fatal. The level is instead decided when
the struct is passed to the respective Handler::emit_*() method.
