`Decoder` has two impls:
- opaque: this impl is already partly infallible, i.e. in some places it
currently panics on failure (e.g. if the input is too short, or on a
bad `Result` discriminant), and in some places it returns an error
(e.g. on a bad `Option` discriminant). The number of places where
either happens is surprisingly small, just because the binary
representation has very little redundancy and a lot of input reading
can occur even on malformed data.
- json: this impl is fully fallible, but it's only used (a) for the
`.rlink` file production, and there's a `FIXME` comment suggesting it
should change to a binary format, and (b) in a few tests in
non-fundamental ways. Indeed #85993 is open to remove it entirely.
And the top-level places in the compiler that call into decoding just
abort on error anyway. So the fallibility is providing little value, and
getting rid of it leads to some non-trivial performance improvements.
Much of this commit is pretty boring and mechanical. Some notes about
a few interesting parts:
- The commit removes `Decoder::{Error,error}`.
- `InternIteratorElement::intern_with`: the impl for `T` now has the same
optimization for small counts that the impl for `Result<T, E>` has,
because it's now much hotter.
- Decodable impls for SmallVec, LinkedList, VecDeque now all use
`collect`, which is nice; the one for `Vec` uses unsafe code, because
that gave better perf on some benchmarks.
Update some rustc dependencies to deduplicate them
This PR updates `rand` and `itertools` in rustc (not the whole workspace) in order to deduplicate them (and hopefully slightly improve compile times).
~~Currently, `object` is still duplicated, but https://github.com/rust-lang/thorin/pull/15 and updating `thorin` in the future will remove the use of version 0.27.~~ Update: Thorin 0.2 has now been released, and this PR updates `rustc_codegen_ssa` to use it and deduplicate the `object` crate.
There's a final tiny rustc dependency, `cfg-if`, which will be left: as both versions 0.1.x and 1.0 looked to be heavily depended on, they will require a few cascading updates to be removed.
Currently, you can use `#[rustc_clean]` to assert to that a particular
query (technically, a `DepNode`) is green or red. However, a green
`DepNode` does not mean that the query result was actually deserialized
from disk - we might have never re-run a query that needed the result.
Some incremental tests are written as regression tests for ICEs that
occured during query result decoding. Using
`#[rustc_clean(loaded_from_disk="typeck")]`, you can now assert
that the result of a particular query (e.g. `typeck`) was actually
loaded from disk, in addition to being green.
Remove `SymbolStr`
This was originally proposed in https://github.com/rust-lang/rust/pull/74554#discussion_r466203544. As well as removing the icky `SymbolStr` type, it allows the removal of a lot of `&` and `*` occurrences.
Best reviewed one commit at a time.
r? `@oli-obk`
Add support for artifact size profiling
This adds support for profiling artifact file sizes (incremental compilation artifacts and query cache to begin with).
Eventually we want to track this in perf.rlo so we can ensure that file sizes do not change dramatically on each pull request.
This relies on support in measureme: https://github.com/rust-lang/measureme/pull/169. Once that lands we can update this PR to not point to a git dependency.
This was worked on together with `@michaelwoerister.`
r? `@wesleywiser`
This performs a substitution of code following the pattern:
let <id> = if let <pat> = ... { identity } else { ... : ! };
To simplify it to:
let <pat> = ... { identity } else { ... : ! };
By adopting the let_else feature.
Mmap the incremental data instead of reading it.
Instead of reading the full incremental state using `fs::read_file`, we memmap it using a private read-only file-backed map.
This allows the system to reclaim any memory we are not using, while ensuring we are not polluted by
outside modifications to the file.
Suggested in https://github.com/rust-lang/rust/pull/83036#issuecomment-800458082 by `@bjorn3`
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
Avoid creating anonymous nodes with zero or one dependency.
Anonymous nodes are only useful to encode dependencies, and cannot be replayed from one compilation session to another.
As such, anonymous nodes without dependency are always green.
Anonymous nodes with only one dependency are equivalent to this dependency.
cc #45408
cc `@michaelwoerister`
Don't panic when failing to initialize incremental directory.
This removes a panic when rustc fails to initialize the incremental directory. This can commonly happen on various filesystems that don't support locking (often various network filesystems). Panics can be confusing and scary, and there are already plenty of issues reporting this.
This has been panicking since 1.22 due to I think #44502 which was a major rework of how things work. Previously, things were simpler and the [`load_dep_graph`](https://github.com/rust-lang/rust/blob/1.21.0/src/librustc_incremental/persist/load.rs#L43-L65) function would emit an error and then continue on without panicking. With 1.22, [`load_dep_graph`](https://github.com/rust-lang/rust/blob/1.22.0/src/librustc_incremental/persist/load.rs#L44) was changed so that it assumes it can load the data without errors. Today, the problem is that it calls [`prepare_session_directory`](fbf1b1a719/compiler/rustc_interface/src/passes.rs (L175-L179)) and then immediately calls `garbage_collect_session_directories` which will panic since the session is `IncrCompSession::NotInitialized`.
The solution here is to have `prepare_session_directory` return an error that must be handled so that compilation stops if it fails.
Some other options:
* Ignore directory lock failures.
* Print a warning on directory lock failure, but otherwise continue with incremental enabled.
* Print a warning on directory lock failure, and disable incremental.
* Provide a different locking mechanism.
Cargo ignores lock errors if locking is not supported, so that would be a precedent for the first option. These options would require quite a bit more changes, but I'm happy to entertain any of them, as I think they all have valid justifications.
There is more discussion on the many issues where this is reported: #49773, #59224, #66513, #76251. I'm not sure if this can be considered closing any of those, though, since I think there is some value in discussing if there is a way to avoid the error altogether. But I think it would make sense to at least close all but one to consolidate them.
This is necessary for options that should invalidate the incremental
hash but *not* affect the crate hash (e.g. --remap-path-prefix).
This doesn't add `for_crate_hash` to the trait directly because it's not
relevant for *types*, only for *options*, which are fields on a larger
struct. Instead, it adds a new `SUBSTRUCT` directive for options, which
does take a `for_crate_hash` parameter.
- Use TRACKED_NO_CRATE_HASH for --remap-path-prefix
- Add test that `remap_path_prefix` is tracked
- Reduce duplication in the test suite to avoid future churn
Found with https://github.com/est31/warnalyzer.
Dubious changes:
- Is anyone else using rustc_apfloat? I feel weird completely deleting
x87 support.
- Maybe some of the dead code in rustc_data_structures, in case someone
wants to use it in the future?
- Don't change rustc_serialize
I plan to scrap most of the json module in the near future (see
https://github.com/rust-lang/compiler-team/issues/418) and fixing the
tests needed more work than I expected.
TODO: check if any of the comments on the deleted code should be kept.
StructField -> FieldDef ("field definition")
Field -> ExprField ("expression field", not "field expression")
FieldPat -> PatField ("pattern field", not "field pattern")
Also rename visiting and other methods working on them.
Serialize dependency graph directly from DepGraph
Reduce memory usage by serializing dep graph directly from `DepGraph`,
rather than copying it into `SerializedDepGraph` and serializing that.
Remove much of the special-case handling around crate metadata
dependency tracking by replacing `DepKind::CrateMetadata` and the
pre-allocation of corresponding `DepNodes` with on-demand invocation
of the `crate_hash` query.
Reduce a large memory spike that happens during serialization by writing
the incr comp structures to file by way of a fixed-size buffer, rather
than an unbounded vector.
Effort was made to keep the instruction count close to that of the
previous implementation. However, buffered writing to a file inherently
has more overhead than writing to a vector, because each write may
result in a handleable error. To reduce this overhead, arrangements are
made so that each LEB128-encoded integer can be written to the buffer
with only one capacity and error check. Higher-level optimizations in
which entire composite structures can be written with one capacity and
error check are possible, but would require much more work.
The performance is mostly on par with the previous implementation, with
small to moderate instruction count regressions. The memory reduction is
significant, however, so it seems like a worth-while trade-off.
This also eliminates a use of a `Path` convenience function, in support
of #80741, refactoring `std::path` to focus on pure data structures and
algorithms.
Implement lazy decoding of DefPathTable during incremental compilation
PR https://github.com/rust-lang/rust/pull/75813 implemented lazy decoding of the `DefPathTable` from crate metadata. However, it requires decoding the entire `DefPathTable` when incremental compilation is active, so that we can map a decoded `DefPathHash` to a `DefId` from an arbitrary crate.
This PR adds support for lazy decoding of dependency `DefPathTable`s when incremental compilation si active.
When we load the incremental cache and dep
graph, we need the ability to map a `DefPathHash` to a `DefId` in the
current compilation session (if the corresponding definition still
exists).
This is accomplished by storing the old `DefId` (that is, the `DefId`
from the previous compilation session) for each `DefPathHash` we need to
remap. Since a `DefPathHash` includes the owning crate, the old crate is
guaranteed to be the right one (if the definition still exists). We then
use the old `DefIndex` as an initial guess, which we validate by
comparing the expected and actual `DefPathHash`es. In most cases,
foreign crates will be completely unchanged, which means that we our
guess will be correct. If our guess is wrong, we fall back to decoding
the entire `DefPathTable` for the foreign crate. This still represents
an improvement over the status quo, since we can skip decoding the
entire `DefPathTable` for other crates (where all of our guesses were
correct).
The main change is that `UnstableOptions::from_environment` now requires
an (optional) crate name. If the crate name is unknown (`None`), then the new feature is not available and you still have to use `RUSTC_BOOTSTRAP=1`. In practice this means the feature is only available for `--crate-name`, not for `#![crate_name]`; I'm interested in supporting the second but I'm not sure how.
Other major changes:
- Added `Session::is_nightly_build()`, which uses the `crate_name` of
the session
- Added `nightly_options::match_is_nightly_build`, a convenience method
for looking up `--crate-name` from CLI arguments.
`Session::is_nightly_build()`should be preferred where possible, since
it will take into account `#![crate_name]` (I think).
- Added `unstable_features` to `rustdoc::RenderOptions`
There is a user-facing change here: things like `RUSTC_BOOTSTRAP=0` no
longer active nightly features. In practice this shouldn't be a big
deal, since `RUSTC_BOOTSTRAP` is the opposite of stable and everyone
uses `RUSTC_BOOTSTRAP=1` anyway.
- Add tests
Check against `Cheat`, not whether nightly features are allowed.
Nightly features are always allowed on the nightly channel.
- Only call `is_nightly_build()` once within a function
- Use booleans consistently for rustc_incremental
Sessions can't be passed through threads, so `read_file` couldn't take a
session. To be consistent, also take a boolean in `write_file_header`.
