stabilize asm_const

compiler/rustc_ast_lowering/messages.ftl

@@ -175,8 +175,6 @@ ast_lowering_underscore_expr_lhs_assign =
     .label = `_` not allowed here
 
 ast_lowering_unstable_inline_assembly = inline assembly is not stable yet on this architecture
-ast_lowering_unstable_inline_assembly_const_operands =
-    const operands for inline assembly are unstable
 ast_lowering_unstable_inline_assembly_label_operands =
     label operands for inline assembly are unstable
 ast_lowering_unstable_may_unwind = the `may_unwind` option is unstable

compiler/rustc_ast_lowering/src/asm.rs

@@ -183,20 +183,9 @@ impl<'a, 'hir> LoweringContext<'a, 'hir> {
                             out_expr: out_expr.as_ref().map(|expr| self.lower_expr(expr)),
                         }
                     }
-                    InlineAsmOperand::Const { anon_const } => {
+                    InlineAsmOperand::Const { anon_const } => hir::InlineAsmOperand::Const {
-                        if !self.tcx.features().asm_const {
+                        anon_const: self.lower_anon_const_to_anon_const(anon_const),
-                            feature_err(
+                    },
-                                sess,
-                                sym::asm_const,
-                                *op_sp,
-                                fluent::ast_lowering_unstable_inline_assembly_const_operands,
-                            )
-                            .emit();
-                        }
-                        hir::InlineAsmOperand::Const {
-                            anon_const: self.lower_anon_const_to_anon_const(anon_const),
-                        }
-                    }
                     InlineAsmOperand::Sym { sym } => {
                         let static_def_id = self
                             .resolver

compiler/rustc_codegen_gcc/tests/run/asm.rs

@@ -3,12 +3,10 @@
 // Run-time:
 //   status: 0
 
-#![feature(asm_const)]
+#[cfg(target_arch = "x86_64")]
-
-#[cfg(target_arch="x86_64")]
 use std::arch::{asm, global_asm};
 
-#[cfg(target_arch="x86_64")]
+#[cfg(target_arch = "x86_64")]
 global_asm!(
     "
     .global add_asm
@@ -22,7 +20,7 @@ extern "C" {
     fn add_asm(a: i64, b: i64) -> i64;
 }
 
-#[cfg(target_arch="x86_64")]
+#[cfg(target_arch = "x86_64")]
 pub unsafe fn mem_cpy(dst: *mut u8, src: *const u8, len: usize) {
     asm!(
         "rep movsb",
@@ -33,7 +31,7 @@ pub unsafe fn mem_cpy(dst: *mut u8, src: *const u8, len: usize) {
     );
 }
 
-#[cfg(target_arch="x86_64")]
+#[cfg(target_arch = "x86_64")]
 fn asm() {
     unsafe {
         asm!("nop");
@@ -178,9 +176,8 @@ fn asm() {
     assert_eq!(array1, array2);
 }
 
-#[cfg(not(target_arch="x86_64"))]
+#[cfg(not(target_arch = "x86_64"))]
-fn asm() {
+fn asm() {}
-}
 
 fn main() {
     asm();

compiler/rustc_feature/src/accepted.rs

@@ -60,6 +60,8 @@ declare_features! (
     (accepted, adx_target_feature, "1.61.0", Some(44839)),
     /// Allows explicit discriminants on non-unit enum variants.
     (accepted, arbitrary_enum_discriminant, "1.66.0", Some(60553)),
+    /// Allows using `const` operands in inline assembly.
+    (accepted, asm_const, "CURRENT_RUSTC_VERSION", Some(93332)),
     /// Allows using `sym` operands in inline assembly.
     (accepted, asm_sym, "1.66.0", Some(93333)),
     /// Allows the definition of associated constants in `trait` or `impl` blocks.

compiler/rustc_feature/src/unstable.rs

@@ -348,8 +348,6 @@ declare_features! (
     (unstable, alloc_error_handler, "1.29.0", Some(51540)),
     /// Allows trait methods with arbitrary self types.
     (unstable, arbitrary_self_types, "1.23.0", Some(44874)),
-    /// Allows using `const` operands in inline assembly.
-    (unstable, asm_const, "1.58.0", Some(93332)),
     /// Enables experimental inline assembly support for additional architectures.
     (unstable, asm_experimental_arch, "1.58.0", Some(93335)),
     /// Allows using `label` operands in inline assembly.

library/core/src/lib.rs

@@ -192,12 +192,12 @@
 //
 // Language features:
 // tidy-alphabetical-start
+#![cfg_attr(bootstrap, feature(asm_const))]
 #![cfg_attr(bootstrap, feature(min_exhaustive_patterns))]
 #![feature(abi_unadjusted)]
 #![feature(adt_const_params)]
 #![feature(allow_internal_unsafe)]
 #![feature(allow_internal_unstable)]
-#![feature(asm_const)]
 #![feature(auto_traits)]
 #![feature(cfg_sanitize)]
 #![feature(cfg_target_has_atomic)]

src/doc/unstable-book/src/language-features/asm-const.md

@@ -1,11 +0,0 @@
-# `asm_const`
-
-The tracking issue for this feature is: [#93332]
-
-[#93332]: https://github.com/rust-lang/rust/issues/93332
-
-------------------------
-
-This feature adds a `const <expr>` operand type to `asm!` and `global_asm!`.
-- `<expr>` must be an integer constant expression.
-- The value of the expression is formatted as a string and substituted directly into the asm template string.

tests/assembly/asm/global_asm.rs

@@ -4,7 +4,6 @@
 //@ compile-flags: -C llvm-args=--x86-asm-syntax=intel
 //@ compile-flags: -C symbol-mangling-version=v0
 
-#![feature(asm_const)]
 #![crate_type = "rlib"]
 
 use std::arch::global_asm;

tests/assembly/asm/msp430-types.rs

@@ -2,7 +2,7 @@
 //@ compile-flags: --target msp430-none-elf
 //@ needs-llvm-components: msp430
 
-#![feature(no_core, lang_items, rustc_attrs, asm_experimental_arch, asm_const)]
+#![feature(no_core, lang_items, rustc_attrs, asm_experimental_arch)]
 #![crate_type = "rlib"]
 #![no_core]
 #![allow(non_camel_case_types)]

tests/ui/asm/aarch64/bad-reg.rs

@@ -1,8 +1,6 @@
 //@ only-aarch64
 //@ compile-flags: -C target-feature=+neon
 
-#![feature(asm_const)]
-
 use std::arch::asm;
 
 fn main() {

tests/ui/asm/aarch64/bad-reg.stderr

@@ -1,17 +1,17 @@
 error: invalid register class `foo`: unknown register class
-  --> $DIR/bad-reg.rs:14:20
+  --> $DIR/bad-reg.rs:12:20
    |
 LL |         asm!("{}", in(foo) foo);
    |                    ^^^^^^^^^^^
 
 error: invalid register `foo`: unknown register
-  --> $DIR/bad-reg.rs:16:18
+  --> $DIR/bad-reg.rs:14:18
    |
 LL |         asm!("", in("foo") foo);
    |                  ^^^^^^^^^^^^^
 
 error: invalid asm template modifier for this register class
-  --> $DIR/bad-reg.rs:18:15
+  --> $DIR/bad-reg.rs:16:15
    |
 LL |         asm!("{:z}", in(reg) foo);
    |               ^^^^   ----------- argument
@@ -21,7 +21,7 @@ LL |         asm!("{:z}", in(reg) foo);
    = note: the `reg` register class supports the following template modifiers: `w`, `x`
 
 error: invalid asm template modifier for this register class
-  --> $DIR/bad-reg.rs:20:15
+  --> $DIR/bad-reg.rs:18:15
    |
 LL |         asm!("{:r}", in(vreg) foo);
    |               ^^^^   ------------ argument
@@ -31,7 +31,7 @@ LL |         asm!("{:r}", in(vreg) foo);
    = note: the `vreg` register class supports the following template modifiers: `b`, `h`, `s`, `d`, `q`, `v`
 
 error: invalid asm template modifier for this register class
-  --> $DIR/bad-reg.rs:22:15
+  --> $DIR/bad-reg.rs:20:15
    |
 LL |         asm!("{:r}", in(vreg_low16) foo);
    |               ^^^^   ------------------ argument
@@ -41,7 +41,7 @@ LL |         asm!("{:r}", in(vreg_low16) foo);
    = note: the `vreg_low16` register class supports the following template modifiers: `b`, `h`, `s`, `d`, `q`, `v`
 
 error: asm template modifiers are not allowed for `const` arguments
-  --> $DIR/bad-reg.rs:24:15
+  --> $DIR/bad-reg.rs:22:15
    |
 LL |         asm!("{:a}", const 0);
    |               ^^^^   ------- argument
@@ -49,7 +49,7 @@ LL |         asm!("{:a}", const 0);
    |               template modifier
 
 error: asm template modifiers are not allowed for `sym` arguments
-  --> $DIR/bad-reg.rs:26:15
+  --> $DIR/bad-reg.rs:24:15
    |
 LL |         asm!("{:a}", sym main);
    |               ^^^^   -------- argument
@@ -57,49 +57,49 @@ LL |         asm!("{:a}", sym main);
    |               template modifier
 
 error: invalid register `x29`: the frame pointer cannot be used as an operand for inline asm
-  --> $DIR/bad-reg.rs:28:18
+  --> $DIR/bad-reg.rs:26:18
    |
 LL |         asm!("", in("x29") foo);
    |                  ^^^^^^^^^^^^^
 
 error: invalid register `sp`: the stack pointer cannot be used as an operand for inline asm
-  --> $DIR/bad-reg.rs:30:18
+  --> $DIR/bad-reg.rs:28:18
    |
 LL |         asm!("", in("sp") foo);
    |                  ^^^^^^^^^^^^
 
 error: invalid register `xzr`: the zero register cannot be used as an operand for inline asm
-  --> $DIR/bad-reg.rs:32:18
+  --> $DIR/bad-reg.rs:30:18
    |
 LL |         asm!("", in("xzr") foo);
    |                  ^^^^^^^^^^^^^
 
 error: invalid register `x19`: x19 is used internally by LLVM and cannot be used as an operand for inline asm
-  --> $DIR/bad-reg.rs:34:18
+  --> $DIR/bad-reg.rs:32:18
    |
 LL |         asm!("", in("x19") foo);
    |                  ^^^^^^^^^^^^^
 
 error: register class `preg` can only be used as a clobber, not as an input or output
-  --> $DIR/bad-reg.rs:37:18
+  --> $DIR/bad-reg.rs:35:18
    |
 LL |         asm!("", in("p0") foo);
    |                  ^^^^^^^^^^^^
 
 error: register class `preg` can only be used as a clobber, not as an input or output
-  --> $DIR/bad-reg.rs:41:20
+  --> $DIR/bad-reg.rs:39:20
    |
 LL |         asm!("{}", in(preg) foo);
    |                    ^^^^^^^^^^^^
 
 error: register class `preg` can only be used as a clobber, not as an input or output
-  --> $DIR/bad-reg.rs:44:20
+  --> $DIR/bad-reg.rs:42:20
    |
 LL |         asm!("{}", out(preg) _);
    |                    ^^^^^^^^^^^
 
 error: register `w0` conflicts with register `x0`
-  --> $DIR/bad-reg.rs:50:32
+  --> $DIR/bad-reg.rs:48:32
    |
 LL |         asm!("", in("x0") foo, in("w0") bar);
    |                  ------------  ^^^^^^^^^^^^ register `w0`
@@ -107,7 +107,7 @@ LL |         asm!("", in("x0") foo, in("w0") bar);
    |                  register `x0`
 
 error: register `x0` conflicts with register `x0`
-  --> $DIR/bad-reg.rs:52:32
+  --> $DIR/bad-reg.rs:50:32
    |
 LL |         asm!("", in("x0") foo, out("x0") bar);
    |                  ------------  ^^^^^^^^^^^^^ register `x0`
@@ -115,13 +115,13 @@ LL |         asm!("", in("x0") foo, out("x0") bar);
    |                  register `x0`
    |
 help: use `lateout` instead of `out` to avoid conflict
-  --> $DIR/bad-reg.rs:52:18
+  --> $DIR/bad-reg.rs:50:18
    |
 LL |         asm!("", in("x0") foo, out("x0") bar);
    |                  ^^^^^^^^^^^^
 
 error: register `q0` conflicts with register `v0`
-  --> $DIR/bad-reg.rs:55:32
+  --> $DIR/bad-reg.rs:53:32
    |
 LL |         asm!("", in("v0") foo, in("q0") bar);
    |                  ------------  ^^^^^^^^^^^^ register `q0`
@@ -129,7 +129,7 @@ LL |         asm!("", in("v0") foo, in("q0") bar);
    |                  register `v0`
 
 error: register `q0` conflicts with register `v0`
-  --> $DIR/bad-reg.rs:57:32
+  --> $DIR/bad-reg.rs:55:32
    |
 LL |         asm!("", in("v0") foo, out("q0") bar);
    |                  ------------  ^^^^^^^^^^^^^ register `q0`
@@ -137,13 +137,13 @@ LL |         asm!("", in("v0") foo, out("q0") bar);
    |                  register `v0`
    |
 help: use `lateout` instead of `out` to avoid conflict
-  --> $DIR/bad-reg.rs:57:18
+  --> $DIR/bad-reg.rs:55:18
    |
 LL |         asm!("", in("v0") foo, out("q0") bar);
    |                  ^^^^^^^^^^^^
 
 error: type `i32` cannot be used with this register class
-  --> $DIR/bad-reg.rs:37:27
+  --> $DIR/bad-reg.rs:35:27
    |
 LL |         asm!("", in("p0") foo);
    |                           ^^^
@@ -151,7 +151,7 @@ LL |         asm!("", in("p0") foo);
    = note: register class `preg` supports these types: 
 
 error: type `i32` cannot be used with this register class
-  --> $DIR/bad-reg.rs:41:29
+  --> $DIR/bad-reg.rs:39:29
    |
 LL |         asm!("{}", in(preg) foo);
    |                             ^^^

tests/ui/asm/aarch64/const.rs

@@ -2,8 +2,6 @@
 //@ run-pass
 //@ needs-asm-support
 
-#![feature(asm_const)]
-
 use std::arch::{asm, global_asm};
 
 fn const_generic<const X: usize>() -> usize {

tests/ui/asm/aarch64/parse-error.rs

@@ -1,7 +1,5 @@
 //@ only-aarch64
 
-#![feature(asm_const)]
-
 use std::arch::{asm, global_asm};
 
 fn main() {

tests/ui/asm/aarch64/parse-error.stderr

@@ -1,107 +1,107 @@
 error: requires at least a template string argument
-  --> $DIR/parse-error.rs:11:9
+  --> $DIR/parse-error.rs:9:9
    |
 LL |         asm!();
    |         ^^^^^^
 
 error: asm template must be a string literal
-  --> $DIR/parse-error.rs:13:14
+  --> $DIR/parse-error.rs:11:14
    |
 LL |         asm!(foo);
    |              ^^^
 
 error: expected token: `,`
-  --> $DIR/parse-error.rs:15:19
+  --> $DIR/parse-error.rs:13:19
    |
 LL |         asm!("{}" foo);
    |                   ^^^ expected `,`
 
 error: expected operand, clobber_abi, options, or additional template string
-  --> $DIR/parse-error.rs:17:20
+  --> $DIR/parse-error.rs:15:20
    |
 LL |         asm!("{}", foo);
    |                    ^^^ expected operand, clobber_abi, options, or additional template string
 
 error: expected `(`, found `foo`
-  --> $DIR/parse-error.rs:19:23
+  --> $DIR/parse-error.rs:17:23
    |
 LL |         asm!("{}", in foo);
    |                       ^^^ expected `(`
 
 error: expected `)`, found `foo`
-  --> $DIR/parse-error.rs:21:27
+  --> $DIR/parse-error.rs:19:27
    |
 LL |         asm!("{}", in(reg foo));
    |                           ^^^ expected `)`
 
 error: expected expression, found end of macro arguments
-  --> $DIR/parse-error.rs:23:27
+  --> $DIR/parse-error.rs:21:27
    |
 LL |         asm!("{}", in(reg));
    |                           ^ expected expression
 
 error: expected register class or explicit register
-  --> $DIR/parse-error.rs:25:26
+  --> $DIR/parse-error.rs:23:26
    |
 LL |         asm!("{}", inout(=) foo => bar);
    |                          ^
 
 error: expected expression, found end of macro arguments
-  --> $DIR/parse-error.rs:27:37
+  --> $DIR/parse-error.rs:25:37
    |
 LL |         asm!("{}", inout(reg) foo =>);
    |                                     ^ expected expression
 
 error: expected one of `!`, `,`, `.`, `::`, `?`, `{`, or an operator, found `=>`
-  --> $DIR/parse-error.rs:29:32
+  --> $DIR/parse-error.rs:27:32
    |
 LL |         asm!("{}", in(reg) foo => bar);
    |                                ^^ expected one of 7 possible tokens
 
 error: expected a path for argument to `sym`
-  --> $DIR/parse-error.rs:31:24
+  --> $DIR/parse-error.rs:29:24
    |
 LL |         asm!("{}", sym foo + bar);
    |                        ^^^^^^^^^
 
 error: expected one of `)`, `att_syntax`, `may_unwind`, `nomem`, `noreturn`, `nostack`, `preserves_flags`, `pure`, `raw`, or `readonly`, found `foo`
-  --> $DIR/parse-error.rs:33:26
+  --> $DIR/parse-error.rs:31:26
    |
 LL |         asm!("", options(foo));
    |                          ^^^ expected one of 10 possible tokens
 
 error: expected one of `)` or `,`, found `foo`
-  --> $DIR/parse-error.rs:35:32
+  --> $DIR/parse-error.rs:33:32
    |
 LL |         asm!("", options(nomem foo));
    |                                ^^^ expected one of `)` or `,`
 
 error: expected one of `)`, `att_syntax`, `may_unwind`, `nomem`, `noreturn`, `nostack`, `preserves_flags`, `pure`, `raw`, or `readonly`, found `foo`
-  --> $DIR/parse-error.rs:37:33
+  --> $DIR/parse-error.rs:35:33
    |
 LL |         asm!("", options(nomem, foo));
    |                                 ^^^ expected one of 10 possible tokens
 
 error: expected string literal
-  --> $DIR/parse-error.rs:41:30
+  --> $DIR/parse-error.rs:39:30
    |
 LL |         asm!("", clobber_abi(foo));
    |                              ^^^ not a string literal
 
 error: expected one of `)` or `,`, found `foo`
-  --> $DIR/parse-error.rs:43:34
+  --> $DIR/parse-error.rs:41:34
    |
 LL |         asm!("", clobber_abi("C" foo));
    |                                  ^^^ expected one of `)` or `,`
 
 error: expected string literal
-  --> $DIR/parse-error.rs:45:35
+  --> $DIR/parse-error.rs:43:35
    |
 LL |         asm!("", clobber_abi("C", foo));
    |                                   ^^^ not a string literal
 
 error: duplicate argument named `a`
-  --> $DIR/parse-error.rs:52:36
+  --> $DIR/parse-error.rs:50:36
    |
 LL |         asm!("{a}", a = const foo, a = const bar);
    |                     -------------  ^^^^^^^^^^^^^ duplicate argument
@@ -109,7 +109,7 @@ LL |         asm!("{a}", a = const foo, a = const bar);
    |                     previously here
 
 error: argument never used
-  --> $DIR/parse-error.rs:52:36
+  --> $DIR/parse-error.rs:50:36
    |
 LL |         asm!("{a}", a = const foo, a = const bar);
    |                                    ^^^^^^^^^^^^^ argument never used
@@ -117,13 +117,13 @@ LL |         asm!("{a}", a = const foo, a = const bar);
    = help: if this argument is intentionally unused, consider using it in an asm comment: `"/* {1} */"`
 
 error: explicit register arguments cannot have names
-  --> $DIR/parse-error.rs:57:18
+  --> $DIR/parse-error.rs:55:18
    |
 LL |         asm!("", a = in("x0") foo);
    |                  ^^^^^^^^^^^^^^^^
 
 error: positional arguments cannot follow named arguments or explicit register arguments
-  --> $DIR/parse-error.rs:63:35
+  --> $DIR/parse-error.rs:61:35
    |
 LL |         asm!("{1}", in("x0") foo, const bar);
    |                     ------------  ^^^^^^^^^ positional argument
@@ -131,19 +131,19 @@ LL |         asm!("{1}", in("x0") foo, const bar);
    |                     explicit register argument
 
 error: expected one of `clobber_abi`, `const`, `in`, `inlateout`, `inout`, `label`, `lateout`, `options`, `out`, or `sym`, found `""`
-  --> $DIR/parse-error.rs:66:29
+  --> $DIR/parse-error.rs:64:29
    |
 LL |         asm!("", options(), "");
    |                             ^^ expected one of 10 possible tokens
 
 error: expected one of `clobber_abi`, `const`, `in`, `inlateout`, `inout`, `label`, `lateout`, `options`, `out`, or `sym`, found `"{}"`
-  --> $DIR/parse-error.rs:68:33
+  --> $DIR/parse-error.rs:66:33
    |
 LL |         asm!("{}", in(reg) foo, "{}", out(reg) foo);
    |                                 ^^^^ expected one of 10 possible tokens
 
 error: asm template must be a string literal
-  --> $DIR/parse-error.rs:70:14
+  --> $DIR/parse-error.rs:68:14
    |
 LL |         asm!(format!("{{{}}}", 0), in(reg) foo);
    |              ^^^^^^^^^^^^^^^^^^^^
@@ -151,7 +151,7 @@ LL |         asm!(format!("{{{}}}", 0), in(reg) foo);
    = note: this error originates in the macro `format` (in Nightly builds, run with -Z macro-backtrace for more info)
 
 error: asm template must be a string literal
-  --> $DIR/parse-error.rs:72:21
+  --> $DIR/parse-error.rs:70:21
    |
 LL |         asm!("{1}", format!("{{{}}}", 0), in(reg) foo, out(reg) bar);
    |                     ^^^^^^^^^^^^^^^^^^^^
@@ -159,127 +159,127 @@ LL |         asm!("{1}", format!("{{{}}}", 0), in(reg) foo, out(reg) bar);
    = note: this error originates in the macro `format` (in Nightly builds, run with -Z macro-backtrace for more info)
 
 error: _ cannot be used for input operands
-  --> $DIR/parse-error.rs:74:28
+  --> $DIR/parse-error.rs:72:28
    |
 LL |         asm!("{}", in(reg) _);
    |                            ^
 
 error: _ cannot be used for input operands
-  --> $DIR/parse-error.rs:76:31
+  --> $DIR/parse-error.rs:74:31
    |
 LL |         asm!("{}", inout(reg) _);
    |                               ^
 
 error: _ cannot be used for input operands
-  --> $DIR/parse-error.rs:78:35
+  --> $DIR/parse-error.rs:76:35
    |
 LL |         asm!("{}", inlateout(reg) _);
    |                                   ^
 
 error: requires at least a template string argument
-  --> $DIR/parse-error.rs:85:1
+  --> $DIR/parse-error.rs:83:1
    |
 LL | global_asm!();
    | ^^^^^^^^^^^^^
 
 error: asm template must be a string literal
-  --> $DIR/parse-error.rs:87:13
+  --> $DIR/parse-error.rs:85:13
    |
 LL | global_asm!(FOO);
    |             ^^^
 
 error: expected token: `,`
-  --> $DIR/parse-error.rs:89:18
+  --> $DIR/parse-error.rs:87:18
    |
 LL | global_asm!("{}" FOO);
    |                  ^^^ expected `,`
 
 error: expected operand, options, or additional template string
-  --> $DIR/parse-error.rs:91:19
+  --> $DIR/parse-error.rs:89:19
    |
 LL | global_asm!("{}", FOO);
    |                   ^^^ expected operand, options, or additional template string
 
 error: expected expression, found end of macro arguments
-  --> $DIR/parse-error.rs:93:24
+  --> $DIR/parse-error.rs:91:24
    |
 LL | global_asm!("{}", const);
    |                        ^ expected expression
 
 error: expected one of `,`, `.`, `?`, or an operator, found `FOO`
-  --> $DIR/parse-error.rs:95:30
+  --> $DIR/parse-error.rs:93:30
    |
 LL | global_asm!("{}", const(reg) FOO);
    |                              ^^^ expected one of `,`, `.`, `?`, or an operator
 
 error: expected one of `)`, `att_syntax`, or `raw`, found `FOO`
-  --> $DIR/parse-error.rs:97:25
+  --> $DIR/parse-error.rs:95:25
    |
 LL | global_asm!("", options(FOO));
    |                         ^^^ expected one of `)`, `att_syntax`, or `raw`
 
 error: the `nomem` option cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:99:25
+  --> $DIR/parse-error.rs:97:25
    |
 LL | global_asm!("", options(nomem FOO));
    |                         ^^^^^ the `nomem` option is not meaningful for global-scoped inline assembly
 
 error: expected one of `)` or `,`, found `FOO`
-  --> $DIR/parse-error.rs:99:31
+  --> $DIR/parse-error.rs:97:31
    |
 LL | global_asm!("", options(nomem FOO));
    |                               ^^^ expected one of `)` or `,`
 
 error: the `nomem` option cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:102:25
+  --> $DIR/parse-error.rs:100:25
    |
 LL | global_asm!("", options(nomem, FOO));
    |                         ^^^^^ the `nomem` option is not meaningful for global-scoped inline assembly
 
 error: expected one of `)`, `att_syntax`, or `raw`, found `FOO`
-  --> $DIR/parse-error.rs:102:32
+  --> $DIR/parse-error.rs:100:32
    |
 LL | global_asm!("", options(nomem, FOO));
    |                                ^^^ expected one of `)`, `att_syntax`, or `raw`
 
 error: expected string literal
-  --> $DIR/parse-error.rs:106:29
+  --> $DIR/parse-error.rs:104:29
    |
 LL | global_asm!("", clobber_abi(FOO));
    |                             ^^^ not a string literal
 
 error: expected one of `)` or `,`, found `FOO`
-  --> $DIR/parse-error.rs:108:33
+  --> $DIR/parse-error.rs:106:33
    |
 LL | global_asm!("", clobber_abi("C" FOO));
    |                                 ^^^ expected one of `)` or `,`
 
 error: expected string literal
-  --> $DIR/parse-error.rs:110:34
+  --> $DIR/parse-error.rs:108:34
    |
 LL | global_asm!("", clobber_abi("C", FOO));
    |                                  ^^^ not a string literal
 
 error: `clobber_abi` cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:112:19
+  --> $DIR/parse-error.rs:110:19
    |
 LL | global_asm!("{}", clobber_abi("C"), const FOO);
    |                   ^^^^^^^^^^^^^^^^
 
 error: `clobber_abi` cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:114:28
+  --> $DIR/parse-error.rs:112:28
    |
 LL | global_asm!("", options(), clobber_abi("C"));
    |                            ^^^^^^^^^^^^^^^^
 
 error: `clobber_abi` cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:116:30
+  --> $DIR/parse-error.rs:114:30
    |
 LL | global_asm!("{}", options(), clobber_abi("C"), const FOO);
    |                              ^^^^^^^^^^^^^^^^
 
 error: duplicate argument named `a`
-  --> $DIR/parse-error.rs:118:35
+  --> $DIR/parse-error.rs:116:35
    |
 LL | global_asm!("{a}", a = const FOO, a = const BAR);
    |                    -------------  ^^^^^^^^^^^^^ duplicate argument
@@ -287,7 +287,7 @@ LL | global_asm!("{a}", a = const FOO, a = const BAR);
    |                    previously here
 
 error: argument never used
-  --> $DIR/parse-error.rs:118:35
+  --> $DIR/parse-error.rs:116:35
    |
 LL | global_asm!("{a}", a = const FOO, a = const BAR);
    |                                   ^^^^^^^^^^^^^ argument never used
@@ -295,19 +295,19 @@ LL | global_asm!("{a}", a = const FOO, a = const BAR);
    = help: if this argument is intentionally unused, consider using it in an asm comment: `"/* {1} */"`
 
 error: expected one of `clobber_abi`, `const`, `options`, or `sym`, found `""`
-  --> $DIR/parse-error.rs:121:28
+  --> $DIR/parse-error.rs:119:28
    |
 LL | global_asm!("", options(), "");
    |                            ^^ expected one of `clobber_abi`, `const`, `options`, or `sym`
 
 error: expected one of `clobber_abi`, `const`, `options`, or `sym`, found `"{}"`
-  --> $DIR/parse-error.rs:123:30
+  --> $DIR/parse-error.rs:121:30
    |
 LL | global_asm!("{}", const FOO, "{}", const FOO);
    |                              ^^^^ expected one of `clobber_abi`, `const`, `options`, or `sym`
 
 error: asm template must be a string literal
-  --> $DIR/parse-error.rs:125:13
+  --> $DIR/parse-error.rs:123:13
    |
 LL | global_asm!(format!("{{{}}}", 0), const FOO);
    |             ^^^^^^^^^^^^^^^^^^^^
@@ -315,7 +315,7 @@ LL | global_asm!(format!("{{{}}}", 0), const FOO);
    = note: this error originates in the macro `format` (in Nightly builds, run with -Z macro-backtrace for more info)
 
 error: asm template must be a string literal
-  --> $DIR/parse-error.rs:127:20
+  --> $DIR/parse-error.rs:125:20
    |
 LL | global_asm!("{1}", format!("{{{}}}", 0), const FOO, const BAR);
    |                    ^^^^^^^^^^^^^^^^^^^^
@@ -323,7 +323,7 @@ LL | global_asm!("{1}", format!("{{{}}}", 0), const FOO, const BAR);
    = note: this error originates in the macro `format` (in Nightly builds, run with -Z macro-backtrace for more info)
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/parse-error.rs:39:37
+  --> $DIR/parse-error.rs:37:37
    |
 LL |         asm!("{}", options(), const foo);
    |                                     ^^^ non-constant value
@@ -334,7 +334,7 @@ LL |     const foo: /* Type */ = 0;
    |     ~~~~~    ++++++++++++
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/parse-error.rs:47:44
+  --> $DIR/parse-error.rs:45:44
    |
 LL |         asm!("{}", clobber_abi("C"), const foo);
    |                                            ^^^ non-constant value
@@ -345,7 +345,7 @@ LL |     const foo: /* Type */ = 0;
    |     ~~~~~    ++++++++++++
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/parse-error.rs:50:55
+  --> $DIR/parse-error.rs:48:55
    |
 LL |         asm!("{}", options(), clobber_abi("C"), const foo);
    |                                                       ^^^ non-constant value
@@ -356,7 +356,7 @@ LL |     const foo: /* Type */ = 0;
    |     ~~~~~    ++++++++++++
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/parse-error.rs:52:31
+  --> $DIR/parse-error.rs:50:31
    |
 LL |         asm!("{a}", a = const foo, a = const bar);
    |                               ^^^ non-constant value
@@ -367,7 +367,7 @@ LL |     const foo: /* Type */ = 0;
    |     ~~~~~    ++++++++++++
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/parse-error.rs:52:46
+  --> $DIR/parse-error.rs:50:46
    |
 LL |         asm!("{a}", a = const foo, a = const bar);
    |                                              ^^^ non-constant value
@@ -377,6 +377,17 @@ help: consider using `const` instead of `let`
 LL |     const bar: /* Type */ = 0;
    |     ~~~~~    ++++++++++++
 
+error[E0435]: attempt to use a non-constant value in a constant
+  --> $DIR/parse-error.rs:57:45
+   |
+LL |         asm!("{a}", in("x0") foo, a = const bar);
+   |                                             ^^^ non-constant value
+   |
+help: consider using `const` instead of `let`
+   |
+LL |     const bar: /* Type */ = 0;
+   |     ~~~~~    ++++++++++++
+
 error[E0435]: attempt to use a non-constant value in a constant
   --> $DIR/parse-error.rs:59:45
    |
@@ -389,18 +400,7 @@ LL |     const bar: /* Type */ = 0;
    |     ~~~~~    ++++++++++++
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/parse-error.rs:61:45
+  --> $DIR/parse-error.rs:61:41
-   |
-LL |         asm!("{a}", in("x0") foo, a = const bar);
-   |                                             ^^^ non-constant value
-   |
-help: consider using `const` instead of `let`
-   |
-LL |     const bar: /* Type */ = 0;
-   |     ~~~~~    ++++++++++++
-
-error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/parse-error.rs:63:41
    |
 LL |         asm!("{1}", in("x0") foo, const bar);
    |                                         ^^^ non-constant value

tests/ui/asm/aarch64/type-check-3.rs

@@ -1,7 +1,7 @@
 //@ only-aarch64
 //@ compile-flags: -C target-feature=+neon
 
-#![feature(repr_simd, asm_const)]
+#![feature(repr_simd)]
 
 use std::arch::aarch64::float64x2_t;
 use std::arch::{asm, global_asm};

tests/ui/asm/aarch64/type-check-4.rs

@@ -1,7 +1,7 @@
 //@ only-aarch64
 //@ compile-flags: -C target-feature=+neon
 
-#![feature(repr_simd, asm_const)]
+#![feature(repr_simd)]
 
 use std::arch::aarch64::float64x2_t;
 use std::arch::{asm, global_asm};
@@ -10,8 +10,7 @@ use std::arch::{asm, global_asm};
 #[derive(Copy, Clone)]
 struct Simd256bit(f64, f64, f64, f64);
 
-fn main() {
+fn main() {}
-}
 
 // Constants must be... constant
 

tests/ui/asm/aarch64/type-check-4.stderr

@@ -1,5 +1,5 @@
 error[E0658]: referencing statics in constants is unstable
-  --> $DIR/type-check-4.rs:25:25
+  --> $DIR/type-check-4.rs:24:25
    |
 LL | global_asm!("{}", const S);
    |                         ^
@@ -11,7 +11,7 @@ LL | global_asm!("{}", const S);
    = help: to fix this, the value can be extracted to a `const` and then used.
 
 error[E0658]: referencing statics in constants is unstable
-  --> $DIR/type-check-4.rs:28:35
+  --> $DIR/type-check-4.rs:27:35
    |
 LL | global_asm!("{}", const const_foo(S));
    |                                   ^
@@ -23,7 +23,7 @@ LL | global_asm!("{}", const const_foo(S));
    = help: to fix this, the value can be extracted to a `const` and then used.
 
 error[E0658]: referencing statics in constants is unstable
-  --> $DIR/type-check-4.rs:31:35
+  --> $DIR/type-check-4.rs:30:35
    |
 LL | global_asm!("{}", const const_bar(S));
    |                                   ^

tests/ui/asm/bad-template.rs

@@ -6,7 +6,7 @@
 //@ [x86_64] needs-llvm-components: x86
 //@ [aarch64] needs-llvm-components: aarch64
 
-#![feature(no_core, lang_items, rustc_attrs, asm_const)]
+#![feature(no_core, lang_items, rustc_attrs)]
 #![no_core]
 
 #[rustc_builtin_macro]

tests/ui/asm/const-error.rs

@@ -1,15 +1,15 @@
 //@ only-x86_64
 //@ needs-asm-support
 
-#![feature(asm_const)]
-
 // Test to make sure that we emit const errors eagerly for inline asm
 
 use std::arch::asm;
 
 fn test<T>() {
-    unsafe { asm!("/* {} */", const 1 / 0); }
+    unsafe {
-    //~^ ERROR evaluation of
+        asm!("/* {} */", const 1 / 0);
+        //~^ ERROR evaluation of
+    }
 }
 
 fn main() {}

tests/ui/asm/const-error.stderr

@@ -1,8 +1,8 @@
 error[E0080]: evaluation of `test::<T>::{constant#0}` failed
-  --> $DIR/const-error.rs:11:37
+  --> $DIR/const-error.rs:10:32
    |
-LL |     unsafe { asm!("/* {} */", const 1 / 0); }
+LL |         asm!("/* {} */", const 1 / 0);
-   |                                     ^^^^^ attempt to divide `1_i32` by zero
+   |                                ^^^^^ attempt to divide `1_i32` by zero
 
 error: aborting due to 1 previous error
 

tests/ui/asm/fail-const-eval-issue-121099.rs

@@ -1,6 +1,5 @@
 //@ build-fail
 //@ needs-asm-support
-#![feature(asm_const)]
 
 use std::arch::global_asm;
 

tests/ui/asm/fail-const-eval-issue-121099.stderr

@@ -1,11 +1,11 @@
 error[E0080]: evaluation of constant value failed
-  --> $DIR/fail-const-eval-issue-121099.rs:9:31
+  --> $DIR/fail-const-eval-issue-121099.rs:8:31
    |
 LL | global_asm!("/* {} */", const 1 << 500);
    |                               ^^^^^^^^ attempt to shift left by `500_i32`, which would overflow
 
 error[E0080]: evaluation of constant value failed
-  --> $DIR/fail-const-eval-issue-121099.rs:11:31
+  --> $DIR/fail-const-eval-issue-121099.rs:10:31
    |
 LL | global_asm!("/* {} */", const 1 / 0);
    |                               ^^^^^ attempt to divide `1_i32` by zero

tests/ui/asm/generic-const.rs

@@ -1,8 +1,6 @@
 //@ needs-asm-support
 //@ build-pass
 
-#![feature(asm_const)]
-
 use std::arch::asm;
 
 fn foofoo<const N: usize>() {}

tests/ui/asm/invalid-const-operand.rs

@@ -2,8 +2,6 @@
 //@ ignore-nvptx64
 //@ ignore-spirv
 
-#![feature(asm_const)]
-
 use std::arch::{asm, global_asm};
 
 // Const operands must be integers and must be constants.

tests/ui/asm/invalid-const-operand.stderr

@@ -1,5 +1,5 @@
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/invalid-const-operand.rs:42:26
+  --> $DIR/invalid-const-operand.rs:40:26
    |
 LL |         asm!("{}", const x);
    |                          ^ non-constant value
@@ -10,7 +10,7 @@ LL |         const x: /* Type */ = 0;
    |         ~~~~~  ++++++++++++
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/invalid-const-operand.rs:45:36
+  --> $DIR/invalid-const-operand.rs:43:36
    |
 LL |         asm!("{}", const const_foo(x));
    |                                    ^ non-constant value
@@ -21,7 +21,7 @@ LL |         const x: /* Type */ = 0;
    |         ~~~~~  ++++++++++++
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/invalid-const-operand.rs:48:36
+  --> $DIR/invalid-const-operand.rs:46:36
    |
 LL |         asm!("{}", const const_bar(x));
    |                                    ^ non-constant value
@@ -32,7 +32,7 @@ LL |         const x: /* Type */ = 0;
    |         ~~~~~  ++++++++++++
 
 error: invalid type for `const` operand
-  --> $DIR/invalid-const-operand.rs:14:19
+  --> $DIR/invalid-const-operand.rs:12:19
    |
 LL | global_asm!("{}", const 0f32);
    |                   ^^^^^^----
@@ -42,7 +42,7 @@ LL | global_asm!("{}", const 0f32);
    = help: `const` operands must be of an integer type
 
 error: invalid type for `const` operand
-  --> $DIR/invalid-const-operand.rs:16:19
+  --> $DIR/invalid-const-operand.rs:14:19
    |
 LL | global_asm!("{}", const 0 as *mut u8);
    |                   ^^^^^^------------
@@ -52,7 +52,7 @@ LL | global_asm!("{}", const 0 as *mut u8);
    = help: `const` operands must be of an integer type
 
 error: invalid type for `const` operand
-  --> $DIR/invalid-const-operand.rs:26:20
+  --> $DIR/invalid-const-operand.rs:24:20
    |
 LL |         asm!("{}", const 0f32);
    |                    ^^^^^^----
@@ -62,7 +62,7 @@ LL |         asm!("{}", const 0f32);
    = help: `const` operands must be of an integer type
 
 error: invalid type for `const` operand
-  --> $DIR/invalid-const-operand.rs:28:20
+  --> $DIR/invalid-const-operand.rs:26:20
    |
 LL |         asm!("{}", const 0 as *mut u8);
    |                    ^^^^^^------------
@@ -72,7 +72,7 @@ LL |         asm!("{}", const 0 as *mut u8);
    = help: `const` operands must be of an integer type
 
 error: invalid type for `const` operand
-  --> $DIR/invalid-const-operand.rs:30:20
+  --> $DIR/invalid-const-operand.rs:28:20
    |
 LL |         asm!("{}", const &0);
    |                    ^^^^^^--

tests/ui/asm/naked-functions.rs

@@ -3,7 +3,7 @@
 //@ ignore-spirv
 
 #![feature(naked_functions)]
-#![feature(asm_const, asm_unwind, linkage)]
+#![feature(asm_unwind, linkage)]
 #![crate_type = "lib"]
 
 use std::arch::asm;

tests/ui/asm/named-asm-labels.rs

@@ -10,7 +10,7 @@
 // which causes less readable LLVM errors and in the worst cases causes ICEs
 // or segfaults based on system dependent behavior and codegen flags.
 
-#![feature(naked_functions, asm_const)]
+#![feature(naked_functions)]
 
 use std::arch::{asm, global_asm};
 
@@ -128,6 +128,7 @@ fn main() {
 
         // Tests usage of colons in non-label positions
         asm!(":lo12:FOO"); // this is apparently valid aarch64
+
         // is there an example that is valid x86 for this test?
         asm!(":bbb nop");
 
@@ -176,7 +177,8 @@ fn main() {
 // label or LTO can cause labels to break
 #[naked]
 pub extern "C" fn foo() -> i32 {
-    unsafe { asm!(".Lfoo: mov rax, {}; ret;", "nop", const 1, options(noreturn)) } //~ ERROR avoid using named labels
+    unsafe { asm!(".Lfoo: mov rax, {}; ret;", "nop", const 1, options(noreturn)) }
+    //~^ ERROR avoid using named labels
 }
 
 // Make sure that non-naked attributes *do* still let the lint happen

tests/ui/asm/named-asm-labels.stderr

@@ -328,7 +328,7 @@ LL |             ab: nop // ab: does foo
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:143:19
+  --> $DIR/named-asm-labels.rs:144:19
    |
 LL |             asm!("test_{}: nop", in(reg) 10);
    |                   ^^^^^^^
@@ -338,7 +338,7 @@ LL |             asm!("test_{}: nop", in(reg) 10);
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:145:15
+  --> $DIR/named-asm-labels.rs:146:15
    |
 LL |         asm!("test_{}: nop", const 10);
    |               ^^^^^^^
@@ -348,7 +348,7 @@ LL |         asm!("test_{}: nop", const 10);
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:146:15
+  --> $DIR/named-asm-labels.rs:147:15
    |
 LL |         asm!("test_{}: nop", sym main);
    |               ^^^^^^^
@@ -358,7 +358,7 @@ LL |         asm!("test_{}: nop", sym main);
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:147:15
+  --> $DIR/named-asm-labels.rs:148:15
    |
 LL |         asm!("{}_test: nop", const 10);
    |               ^^^^^^^
@@ -368,7 +368,7 @@ LL |         asm!("{}_test: nop", const 10);
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:148:15
+  --> $DIR/named-asm-labels.rs:149:15
    |
 LL |         asm!("test_{}_test: nop", const 10);
    |               ^^^^^^^^^^^^
@@ -378,7 +378,7 @@ LL |         asm!("test_{}_test: nop", const 10);
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:149:15
+  --> $DIR/named-asm-labels.rs:150:15
    |
 LL |         asm!("{}: nop", const 10);
    |               ^^
@@ -388,7 +388,7 @@ LL |         asm!("{}: nop", const 10);
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:151:15
+  --> $DIR/named-asm-labels.rs:152:15
    |
 LL |         asm!("{uwu}: nop", uwu = const 10);
    |               ^^^^^
@@ -398,7 +398,7 @@ LL |         asm!("{uwu}: nop", uwu = const 10);
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:152:15
+  --> $DIR/named-asm-labels.rs:153:15
    |
 LL |         asm!("{0}: nop", const 10);
    |               ^^^
@@ -408,7 +408,7 @@ LL |         asm!("{0}: nop", const 10);
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:153:15
+  --> $DIR/named-asm-labels.rs:154:15
    |
 LL |         asm!("{1}: nop", "/* {0} */", const 10, const 20);
    |               ^^^
@@ -418,7 +418,7 @@ LL |         asm!("{1}: nop", "/* {0} */", const 10, const 20);
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:156:14
+  --> $DIR/named-asm-labels.rs:157:14
    |
 LL |         asm!(include_str!("named-asm-labels.s"));
    |              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -428,7 +428,7 @@ LL |         asm!(include_str!("named-asm-labels.s"));
    = note: the label may be declared in the expansion of a macro
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:156:14
+  --> $DIR/named-asm-labels.rs:157:14
    |
 LL |         asm!(include_str!("named-asm-labels.s"));
    |              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -439,7 +439,7 @@ LL |         asm!(include_str!("named-asm-labels.s"));
    = note: duplicate diagnostic emitted due to `-Z deduplicate-diagnostics=no`
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:156:14
+  --> $DIR/named-asm-labels.rs:157:14
    |
 LL |         asm!(include_str!("named-asm-labels.s"));
    |              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -450,7 +450,7 @@ LL |         asm!(include_str!("named-asm-labels.s"));
    = note: duplicate diagnostic emitted due to `-Z deduplicate-diagnostics=no`
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:156:14
+  --> $DIR/named-asm-labels.rs:157:14
    |
 LL |         asm!(include_str!("named-asm-labels.s"));
    |              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -461,7 +461,7 @@ LL |         asm!(include_str!("named-asm-labels.s"));
    = note: duplicate diagnostic emitted due to `-Z deduplicate-diagnostics=no`
 
 warning: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:170:19
+  --> $DIR/named-asm-labels.rs:171:19
    |
 LL |             asm!("warned: nop");
    |                   ^^^^^^
@@ -469,13 +469,13 @@ LL |             asm!("warned: nop");
    = help: only local labels of the form `<number>:` should be used in inline asm
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 note: the lint level is defined here
-  --> $DIR/named-asm-labels.rs:168:16
+  --> $DIR/named-asm-labels.rs:169:16
    |
 LL |         #[warn(named_asm_labels)]
    |                ^^^^^^^^^^^^^^^^
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:179:20
+  --> $DIR/named-asm-labels.rs:180:20
    |
 LL |     unsafe { asm!(".Lfoo: mov rax, {}; ret;", "nop", const 1, options(noreturn)) }
    |                    ^^^^^
@@ -484,7 +484,7 @@ LL |     unsafe { asm!(".Lfoo: mov rax, {}; ret;", "nop", const 1, options(noret
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:185:20
+  --> $DIR/named-asm-labels.rs:187:20
    |
 LL |     unsafe { asm!(".Lbar: mov rax, {}; ret;", "nop", const 1, options(noreturn)) }
    |                    ^^^^^
@@ -493,7 +493,7 @@ LL |     unsafe { asm!(".Lbar: mov rax, {}; ret;", "nop", const 1, options(noret
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:193:20
+  --> $DIR/named-asm-labels.rs:195:20
    |
 LL |     unsafe { asm!(".Laaa: nop; ret;", options(noreturn)) }
    |                    ^^^^^
@@ -502,7 +502,7 @@ LL |     unsafe { asm!(".Laaa: nop; ret;", options(noreturn)) }
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:203:24
+  --> $DIR/named-asm-labels.rs:205:24
    |
 LL |         unsafe { asm!(".Lbbb: nop; ret;", options(noreturn)) }
    |                        ^^^^^
@@ -511,7 +511,7 @@ LL |         unsafe { asm!(".Lbbb: nop; ret;", options(noreturn)) }
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:212:15
+  --> $DIR/named-asm-labels.rs:214:15
    |
 LL |         asm!("closure1: nop");
    |               ^^^^^^^^
@@ -520,7 +520,7 @@ LL |         asm!("closure1: nop");
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:216:15
+  --> $DIR/named-asm-labels.rs:218:15
    |
 LL |         asm!("closure2: nop");
    |               ^^^^^^^^
@@ -529,7 +529,7 @@ LL |         asm!("closure2: nop");
    = note: see the asm section of Rust By Example <https://doc.rust-lang.org/nightly/rust-by-example/unsafe/asm.html#labels> for more information
 
 error: avoid using named labels in inline assembly
-  --> $DIR/named-asm-labels.rs:226:19
+  --> $DIR/named-asm-labels.rs:228:19
    |
 LL |             asm!("closure3: nop");
    |                   ^^^^^^^^

tests/ui/asm/parse-error.rs

@@ -1,7 +1,5 @@
 //@ needs-asm-support
 
-#![feature(asm_const)]
-
 use std::arch::{asm, global_asm};
 
 fn main() {

tests/ui/asm/parse-error.stderr

@@ -1,167 +1,167 @@
 error: requires at least a template string argument
-  --> $DIR/parse-error.rs:11:9
+  --> $DIR/parse-error.rs:9:9
    |
 LL |         asm!();
    |         ^^^^^^
 
 error: asm template must be a string literal
-  --> $DIR/parse-error.rs:13:14
+  --> $DIR/parse-error.rs:11:14
    |
 LL |         asm!(foo);
    |              ^^^
 
 error: expected token: `,`
-  --> $DIR/parse-error.rs:15:19
+  --> $DIR/parse-error.rs:13:19
    |
 LL |         asm!("{}" foo);
    |                   ^^^ expected `,`
 
 error: expected operand, clobber_abi, options, or additional template string
-  --> $DIR/parse-error.rs:17:20
+  --> $DIR/parse-error.rs:15:20
    |
 LL |         asm!("{}", foo);
    |                    ^^^ expected operand, clobber_abi, options, or additional template string
 
 error: expected `(`, found `foo`
-  --> $DIR/parse-error.rs:19:23
+  --> $DIR/parse-error.rs:17:23
    |
 LL |         asm!("{}", in foo);
    |                       ^^^ expected `(`
 
 error: expected `)`, found `foo`
-  --> $DIR/parse-error.rs:21:27
+  --> $DIR/parse-error.rs:19:27
    |
 LL |         asm!("{}", in(reg foo));
    |                           ^^^ expected `)`
 
 error: expected expression, found end of macro arguments
-  --> $DIR/parse-error.rs:23:27
+  --> $DIR/parse-error.rs:21:27
    |
 LL |         asm!("{}", in(reg));
    |                           ^ expected expression
 
 error: expected register class or explicit register
-  --> $DIR/parse-error.rs:25:26
+  --> $DIR/parse-error.rs:23:26
    |
 LL |         asm!("{}", inout(=) foo => bar);
    |                          ^
 
 error: expected expression, found end of macro arguments
-  --> $DIR/parse-error.rs:27:37
+  --> $DIR/parse-error.rs:25:37
    |
 LL |         asm!("{}", inout(reg) foo =>);
    |                                     ^ expected expression
 
 error: expected one of `!`, `,`, `.`, `::`, `?`, `{`, or an operator, found `=>`
-  --> $DIR/parse-error.rs:29:32
+  --> $DIR/parse-error.rs:27:32
    |
 LL |         asm!("{}", in(reg) foo => bar);
    |                                ^^ expected one of 7 possible tokens
 
 error: expected a path for argument to `sym`
-  --> $DIR/parse-error.rs:31:24
+  --> $DIR/parse-error.rs:29:24
    |
 LL |         asm!("{}", sym foo + bar);
    |                        ^^^^^^^^^
 
 error: expected one of `)`, `att_syntax`, `may_unwind`, `nomem`, `noreturn`, `nostack`, `preserves_flags`, `pure`, `raw`, or `readonly`, found `foo`
-  --> $DIR/parse-error.rs:33:26
+  --> $DIR/parse-error.rs:31:26
    |
 LL |         asm!("", options(foo));
    |                          ^^^ expected one of 10 possible tokens
 
 error: expected one of `)` or `,`, found `foo`
-  --> $DIR/parse-error.rs:35:32
+  --> $DIR/parse-error.rs:33:32
    |
 LL |         asm!("", options(nomem foo));
    |                                ^^^ expected one of `)` or `,`
 
 error: expected one of `)`, `att_syntax`, `may_unwind`, `nomem`, `noreturn`, `nostack`, `preserves_flags`, `pure`, `raw`, or `readonly`, found `foo`
-  --> $DIR/parse-error.rs:37:33
+  --> $DIR/parse-error.rs:35:33
    |
 LL |         asm!("", options(nomem, foo));
    |                                 ^^^ expected one of 10 possible tokens
 
 error: at least one abi must be provided as an argument to `clobber_abi`
-  --> $DIR/parse-error.rs:44:30
+  --> $DIR/parse-error.rs:42:30
    |
 LL |         asm!("", clobber_abi());
    |                              ^
 
 error: expected string literal
-  --> $DIR/parse-error.rs:46:30
+  --> $DIR/parse-error.rs:44:30
    |
 LL |         asm!("", clobber_abi(foo));
    |                              ^^^ not a string literal
 
 error: expected one of `)` or `,`, found `foo`
-  --> $DIR/parse-error.rs:48:34
+  --> $DIR/parse-error.rs:46:34
    |
 LL |         asm!("", clobber_abi("C" foo));
    |                                  ^^^ expected one of `)` or `,`
 
 error: expected string literal
-  --> $DIR/parse-error.rs:50:35
+  --> $DIR/parse-error.rs:48:35
    |
 LL |         asm!("", clobber_abi("C", foo));
    |                                   ^^^ not a string literal
 
 error: expected string literal
-  --> $DIR/parse-error.rs:52:30
+  --> $DIR/parse-error.rs:50:30
    |
 LL |         asm!("", clobber_abi(1));
    |                              ^ not a string literal
 
 error: expected string literal
-  --> $DIR/parse-error.rs:54:30
+  --> $DIR/parse-error.rs:52:30
    |
 LL |         asm!("", clobber_abi(()));
    |                              ^ not a string literal
 
 error: expected string literal
-  --> $DIR/parse-error.rs:56:30
+  --> $DIR/parse-error.rs:54:30
    |
 LL |         asm!("", clobber_abi(uwu));
    |                              ^^^ not a string literal
 
 error: expected string literal
-  --> $DIR/parse-error.rs:58:30
+  --> $DIR/parse-error.rs:56:30
    |
 LL |         asm!("", clobber_abi({}));
    |                              ^ not a string literal
 
 error: expected string literal
-  --> $DIR/parse-error.rs:60:30
+  --> $DIR/parse-error.rs:58:30
    |
 LL |         asm!("", clobber_abi(loop {}));
    |                              ^^^^ not a string literal
 
 error: expected string literal
-  --> $DIR/parse-error.rs:62:30
+  --> $DIR/parse-error.rs:60:30
    |
 LL |         asm!("", clobber_abi(if));
    |                              ^^ not a string literal
 
 error: expected string literal
-  --> $DIR/parse-error.rs:64:30
+  --> $DIR/parse-error.rs:62:30
    |
 LL |         asm!("", clobber_abi(do));
    |                              ^^ not a string literal
 
 error: expected string literal
-  --> $DIR/parse-error.rs:66:30
+  --> $DIR/parse-error.rs:64:30
    |
 LL |         asm!("", clobber_abi(<));
    |                              ^ not a string literal
 
 error: expected string literal
-  --> $DIR/parse-error.rs:68:30
+  --> $DIR/parse-error.rs:66:30
    |
 LL |         asm!("", clobber_abi(.));
    |                              ^ not a string literal
 
 error: duplicate argument named `a`
-  --> $DIR/parse-error.rs:76:36
+  --> $DIR/parse-error.rs:74:36
    |
 LL |         asm!("{a}", a = const foo, a = const bar);
    |                     -------------  ^^^^^^^^^^^^^ duplicate argument
@@ -169,7 +169,7 @@ LL |         asm!("{a}", a = const foo, a = const bar);
    |                     previously here
 
 error: argument never used
-  --> $DIR/parse-error.rs:76:36
+  --> $DIR/parse-error.rs:74:36
    |
 LL |         asm!("{a}", a = const foo, a = const bar);
    |                                    ^^^^^^^^^^^^^ argument never used
@@ -177,19 +177,19 @@ LL |         asm!("{a}", a = const foo, a = const bar);
    = help: if this argument is intentionally unused, consider using it in an asm comment: `"/* {1} */"`
 
 error: expected one of `clobber_abi`, `const`, `in`, `inlateout`, `inout`, `label`, `lateout`, `options`, `out`, or `sym`, found `""`
-  --> $DIR/parse-error.rs:82:29
+  --> $DIR/parse-error.rs:80:29
    |
 LL |         asm!("", options(), "");
    |                             ^^ expected one of 10 possible tokens
 
 error: expected one of `clobber_abi`, `const`, `in`, `inlateout`, `inout`, `label`, `lateout`, `options`, `out`, or `sym`, found `"{}"`
-  --> $DIR/parse-error.rs:84:33
+  --> $DIR/parse-error.rs:82:33
    |
 LL |         asm!("{}", in(reg) foo, "{}", out(reg) foo);
    |                                 ^^^^ expected one of 10 possible tokens
 
 error: asm template must be a string literal
-  --> $DIR/parse-error.rs:86:14
+  --> $DIR/parse-error.rs:84:14
    |
 LL |         asm!(format!("{{{}}}", 0), in(reg) foo);
    |              ^^^^^^^^^^^^^^^^^^^^
@@ -197,7 +197,7 @@ LL |         asm!(format!("{{{}}}", 0), in(reg) foo);
    = note: this error originates in the macro `format` (in Nightly builds, run with -Z macro-backtrace for more info)
 
 error: asm template must be a string literal
-  --> $DIR/parse-error.rs:88:21
+  --> $DIR/parse-error.rs:86:21
    |
 LL |         asm!("{1}", format!("{{{}}}", 0), in(reg) foo, out(reg) bar);
    |                     ^^^^^^^^^^^^^^^^^^^^
@@ -205,139 +205,139 @@ LL |         asm!("{1}", format!("{{{}}}", 0), in(reg) foo, out(reg) bar);
    = note: this error originates in the macro `format` (in Nightly builds, run with -Z macro-backtrace for more info)
 
 error: _ cannot be used for input operands
-  --> $DIR/parse-error.rs:90:28
+  --> $DIR/parse-error.rs:88:28
    |
 LL |         asm!("{}", in(reg) _);
    |                            ^
 
 error: _ cannot be used for input operands
-  --> $DIR/parse-error.rs:92:31
+  --> $DIR/parse-error.rs:90:31
    |
 LL |         asm!("{}", inout(reg) _);
    |                               ^
 
 error: _ cannot be used for input operands
-  --> $DIR/parse-error.rs:94:35
+  --> $DIR/parse-error.rs:92:35
    |
 LL |         asm!("{}", inlateout(reg) _);
    |                                   ^
 
 error: requires at least a template string argument
-  --> $DIR/parse-error.rs:101:1
+  --> $DIR/parse-error.rs:99:1
    |
 LL | global_asm!();
    | ^^^^^^^^^^^^^
 
 error: asm template must be a string literal
-  --> $DIR/parse-error.rs:103:13
+  --> $DIR/parse-error.rs:101:13
    |
 LL | global_asm!(FOO);
    |             ^^^
 
 error: expected token: `,`
-  --> $DIR/parse-error.rs:105:18
+  --> $DIR/parse-error.rs:103:18
    |
 LL | global_asm!("{}" FOO);
    |                  ^^^ expected `,`
 
 error: expected operand, options, or additional template string
-  --> $DIR/parse-error.rs:107:19
+  --> $DIR/parse-error.rs:105:19
    |
 LL | global_asm!("{}", FOO);
    |                   ^^^ expected operand, options, or additional template string
 
 error: expected expression, found end of macro arguments
-  --> $DIR/parse-error.rs:109:24
+  --> $DIR/parse-error.rs:107:24
    |
 LL | global_asm!("{}", const);
    |                        ^ expected expression
 
 error: expected one of `,`, `.`, `?`, or an operator, found `FOO`
-  --> $DIR/parse-error.rs:111:30
+  --> $DIR/parse-error.rs:109:30
    |
 LL | global_asm!("{}", const(reg) FOO);
    |                              ^^^ expected one of `,`, `.`, `?`, or an operator
 
 error: expected one of `)`, `att_syntax`, or `raw`, found `FOO`
-  --> $DIR/parse-error.rs:113:25
+  --> $DIR/parse-error.rs:111:25
    |
 LL | global_asm!("", options(FOO));
    |                         ^^^ expected one of `)`, `att_syntax`, or `raw`
 
 error: expected one of `)`, `att_syntax`, or `raw`, found `FOO`
-  --> $DIR/parse-error.rs:115:25
+  --> $DIR/parse-error.rs:113:25
    |
 LL | global_asm!("", options(FOO,));
    |                         ^^^ expected one of `)`, `att_syntax`, or `raw`
 
 error: the `nomem` option cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:117:25
+  --> $DIR/parse-error.rs:115:25
    |
 LL | global_asm!("", options(nomem FOO));
    |                         ^^^^^ the `nomem` option is not meaningful for global-scoped inline assembly
 
 error: expected one of `)` or `,`, found `FOO`
-  --> $DIR/parse-error.rs:117:31
+  --> $DIR/parse-error.rs:115:31
    |
 LL | global_asm!("", options(nomem FOO));
    |                               ^^^ expected one of `)` or `,`
 
 error: the `nomem` option cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:120:25
+  --> $DIR/parse-error.rs:118:25
    |
 LL | global_asm!("", options(nomem, FOO));
    |                         ^^^^^ the `nomem` option is not meaningful for global-scoped inline assembly
 
 error: expected one of `)`, `att_syntax`, or `raw`, found `FOO`
-  --> $DIR/parse-error.rs:120:32
+  --> $DIR/parse-error.rs:118:32
    |
 LL | global_asm!("", options(nomem, FOO));
    |                                ^^^ expected one of `)`, `att_syntax`, or `raw`
 
 error: expected string literal
-  --> $DIR/parse-error.rs:124:29
+  --> $DIR/parse-error.rs:122:29
    |
 LL | global_asm!("", clobber_abi(FOO));
    |                             ^^^ not a string literal
 
 error: expected one of `)` or `,`, found `FOO`
-  --> $DIR/parse-error.rs:126:33
+  --> $DIR/parse-error.rs:124:33
    |
 LL | global_asm!("", clobber_abi("C" FOO));
    |                                 ^^^ expected one of `)` or `,`
 
 error: expected string literal
-  --> $DIR/parse-error.rs:128:34
+  --> $DIR/parse-error.rs:126:34
    |
 LL | global_asm!("", clobber_abi("C", FOO));
    |                                  ^^^ not a string literal
 
 error: `clobber_abi` cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:130:19
+  --> $DIR/parse-error.rs:128:19
    |
 LL | global_asm!("{}", clobber_abi("C"), const FOO);
    |                   ^^^^^^^^^^^^^^^^
 
 error: `clobber_abi` cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:132:28
+  --> $DIR/parse-error.rs:130:28
    |
 LL | global_asm!("", options(), clobber_abi("C"));
    |                            ^^^^^^^^^^^^^^^^
 
 error: `clobber_abi` cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:134:30
+  --> $DIR/parse-error.rs:132:30
    |
 LL | global_asm!("{}", options(), clobber_abi("C"), const FOO);
    |                              ^^^^^^^^^^^^^^^^
 
 error: `clobber_abi` cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:136:17
+  --> $DIR/parse-error.rs:134:17
    |
 LL | global_asm!("", clobber_abi("C"), clobber_abi("C"));
    |                 ^^^^^^^^^^^^^^^^  ^^^^^^^^^^^^^^^^
 
 error: duplicate argument named `a`
-  --> $DIR/parse-error.rs:138:35
+  --> $DIR/parse-error.rs:136:35
    |
 LL | global_asm!("{a}", a = const FOO, a = const BAR);
    |                    -------------  ^^^^^^^^^^^^^ duplicate argument
@@ -345,7 +345,7 @@ LL | global_asm!("{a}", a = const FOO, a = const BAR);
    |                    previously here
 
 error: argument never used
-  --> $DIR/parse-error.rs:138:35
+  --> $DIR/parse-error.rs:136:35
    |
 LL | global_asm!("{a}", a = const FOO, a = const BAR);
    |                                   ^^^^^^^^^^^^^ argument never used
@@ -353,19 +353,19 @@ LL | global_asm!("{a}", a = const FOO, a = const BAR);
    = help: if this argument is intentionally unused, consider using it in an asm comment: `"/* {1} */"`
 
 error: expected one of `clobber_abi`, `const`, `options`, or `sym`, found `""`
-  --> $DIR/parse-error.rs:141:28
+  --> $DIR/parse-error.rs:139:28
    |
 LL | global_asm!("", options(), "");
    |                            ^^ expected one of `clobber_abi`, `const`, `options`, or `sym`
 
 error: expected one of `clobber_abi`, `const`, `options`, or `sym`, found `"{}"`
-  --> $DIR/parse-error.rs:143:30
+  --> $DIR/parse-error.rs:141:30
    |
 LL | global_asm!("{}", const FOO, "{}", const FOO);
    |                              ^^^^ expected one of `clobber_abi`, `const`, `options`, or `sym`
 
 error: asm template must be a string literal
-  --> $DIR/parse-error.rs:145:13
+  --> $DIR/parse-error.rs:143:13
    |
 LL | global_asm!(format!("{{{}}}", 0), const FOO);
    |             ^^^^^^^^^^^^^^^^^^^^
@@ -373,7 +373,7 @@ LL | global_asm!(format!("{{{}}}", 0), const FOO);
    = note: this error originates in the macro `format` (in Nightly builds, run with -Z macro-backtrace for more info)
 
 error: asm template must be a string literal
-  --> $DIR/parse-error.rs:147:20
+  --> $DIR/parse-error.rs:145:20
    |
 LL | global_asm!("{1}", format!("{{{}}}", 0), const FOO, const BAR);
    |                    ^^^^^^^^^^^^^^^^^^^^
@@ -381,43 +381,43 @@ LL | global_asm!("{1}", format!("{{{}}}", 0), const FOO, const BAR);
    = note: this error originates in the macro `format` (in Nightly builds, run with -Z macro-backtrace for more info)
 
 error: the `in` operand cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:150:19
+  --> $DIR/parse-error.rs:148:19
    |
 LL | global_asm!("{}", in(reg));
    |                   ^^ the `in` operand is not meaningful for global-scoped inline assembly, remove it
 
 error: the `out` operand cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:152:19
+  --> $DIR/parse-error.rs:150:19
    |
 LL | global_asm!("{}", out(reg));
    |                   ^^^ the `out` operand is not meaningful for global-scoped inline assembly, remove it
 
 error: the `lateout` operand cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:154:19
+  --> $DIR/parse-error.rs:152:19
    |
 LL | global_asm!("{}", lateout(reg));
    |                   ^^^^^^^ the `lateout` operand is not meaningful for global-scoped inline assembly, remove it
 
 error: the `inout` operand cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:156:19
+  --> $DIR/parse-error.rs:154:19
    |
 LL | global_asm!("{}", inout(reg));
    |                   ^^^^^ the `inout` operand is not meaningful for global-scoped inline assembly, remove it
 
 error: the `inlateout` operand cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:158:19
+  --> $DIR/parse-error.rs:156:19
    |
 LL | global_asm!("{}", inlateout(reg));
    |                   ^^^^^^^^^ the `inlateout` operand is not meaningful for global-scoped inline assembly, remove it
 
 error: the `label` operand cannot be used with `global_asm!`
-  --> $DIR/parse-error.rs:160:19
+  --> $DIR/parse-error.rs:158:19
    |
 LL | global_asm!("{}", label(reg));
    |                   ^^^^^ the `label` operand is not meaningful for global-scoped inline assembly, remove it
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/parse-error.rs:39:37
+  --> $DIR/parse-error.rs:37:37
    |
 LL |         asm!("{}", options(), const foo);
    |                                     ^^^ non-constant value
@@ -428,7 +428,7 @@ LL |     const foo: /* Type */ = 0;
    |     ~~~~~    ++++++++++++
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/parse-error.rs:71:44
+  --> $DIR/parse-error.rs:69:44
    |
 LL |         asm!("{}", clobber_abi("C"), const foo);
    |                                            ^^^ non-constant value
@@ -439,7 +439,7 @@ LL |     const foo: /* Type */ = 0;
    |     ~~~~~    ++++++++++++
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/parse-error.rs:74:55
+  --> $DIR/parse-error.rs:72:55
    |
 LL |         asm!("{}", options(), clobber_abi("C"), const foo);
    |                                                       ^^^ non-constant value
@@ -450,7 +450,7 @@ LL |     const foo: /* Type */ = 0;
    |     ~~~~~    ++++++++++++
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/parse-error.rs:76:31
+  --> $DIR/parse-error.rs:74:31
    |
 LL |         asm!("{a}", a = const foo, a = const bar);
    |                               ^^^ non-constant value
@@ -461,7 +461,7 @@ LL |     const foo: /* Type */ = 0;
    |     ~~~~~    ++++++++++++
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/parse-error.rs:76:46
+  --> $DIR/parse-error.rs:74:46
    |
 LL |         asm!("{a}", a = const foo, a = const bar);
    |                                              ^^^ non-constant value

tests/ui/asm/type-check-1.rs

@@ -2,8 +2,6 @@
 //@ ignore-nvptx64
 //@ ignore-spirv
 
-#![feature(asm_const)]
-
 use std::arch::{asm, global_asm};
 
 fn main() {

tests/ui/asm/type-check-1.stderr

@@ -1,17 +1,17 @@
 error: invalid asm output
-  --> $DIR/type-check-1.rs:14:29
+  --> $DIR/type-check-1.rs:12:29
    |
 LL |         asm!("{}", out(reg) 1 + 2);
    |                             ^^^^^ cannot assign to this expression
 
 error: invalid asm output
-  --> $DIR/type-check-1.rs:16:31
+  --> $DIR/type-check-1.rs:14:31
    |
 LL |         asm!("{}", inout(reg) 1 + 2);
    |                               ^^^^^ cannot assign to this expression
 
 error[E0277]: the size for values of type `[u64]` cannot be known at compilation time
-  --> $DIR/type-check-1.rs:22:28
+  --> $DIR/type-check-1.rs:20:28
    |
 LL |         asm!("{}", in(reg) v[..]);
    |                            ^^^^^ doesn't have a size known at compile-time
@@ -20,7 +20,7 @@ LL |         asm!("{}", in(reg) v[..]);
    = note: all inline asm arguments must have a statically known size
 
 error[E0277]: the size for values of type `[u64]` cannot be known at compilation time
-  --> $DIR/type-check-1.rs:25:29
+  --> $DIR/type-check-1.rs:23:29
    |
 LL |         asm!("{}", out(reg) v[..]);
    |                             ^^^^^ doesn't have a size known at compile-time
@@ -29,7 +29,7 @@ LL |         asm!("{}", out(reg) v[..]);
    = note: all inline asm arguments must have a statically known size
 
 error[E0277]: the size for values of type `[u64]` cannot be known at compilation time
-  --> $DIR/type-check-1.rs:28:31
+  --> $DIR/type-check-1.rs:26:31
    |
 LL |         asm!("{}", inout(reg) v[..]);
    |                               ^^^^^ doesn't have a size known at compile-time
@@ -38,7 +38,7 @@ LL |         asm!("{}", inout(reg) v[..]);
    = note: all inline asm arguments must have a statically known size
 
 error: cannot use value of type `[u64]` for inline assembly
-  --> $DIR/type-check-1.rs:22:28
+  --> $DIR/type-check-1.rs:20:28
    |
 LL |         asm!("{}", in(reg) v[..]);
    |                            ^^^^^
@@ -46,7 +46,7 @@ LL |         asm!("{}", in(reg) v[..]);
    = note: only integers, floats, SIMD vectors, pointers and function pointers can be used as arguments for inline assembly
 
 error: cannot use value of type `[u64]` for inline assembly
-  --> $DIR/type-check-1.rs:25:29
+  --> $DIR/type-check-1.rs:23:29
    |
 LL |         asm!("{}", out(reg) v[..]);
    |                             ^^^^^
@@ -54,7 +54,7 @@ LL |         asm!("{}", out(reg) v[..]);
    = note: only integers, floats, SIMD vectors, pointers and function pointers can be used as arguments for inline assembly
 
 error: cannot use value of type `[u64]` for inline assembly
-  --> $DIR/type-check-1.rs:28:31
+  --> $DIR/type-check-1.rs:26:31
    |
 LL |         asm!("{}", inout(reg) v[..]);
    |                               ^^^^^

tests/ui/asm/x86_64/bad-reg.rs

@@ -1,8 +1,6 @@
 //@ only-x86_64
 //@ compile-flags: -C target-feature=+avx2
 
-#![feature(asm_const)]
-
 use std::arch::asm;
 
 fn main() {

tests/ui/asm/x86_64/bad-reg.stderr

@@ -1,17 +1,17 @@
 error: invalid register class `foo`: unknown register class
-  --> $DIR/bad-reg.rs:14:20
+  --> $DIR/bad-reg.rs:12:20
    |
 LL |         asm!("{}", in(foo) foo);
    |                    ^^^^^^^^^^^
 
 error: invalid register `foo`: unknown register
-  --> $DIR/bad-reg.rs:16:18
+  --> $DIR/bad-reg.rs:14:18
    |
 LL |         asm!("", in("foo") foo);
    |                  ^^^^^^^^^^^^^
 
 error: invalid asm template modifier for this register class
-  --> $DIR/bad-reg.rs:18:15
+  --> $DIR/bad-reg.rs:16:15
    |
 LL |         asm!("{:z}", in(reg) foo);
    |               ^^^^   ----------- argument
@@ -21,7 +21,7 @@ LL |         asm!("{:z}", in(reg) foo);
    = note: the `reg` register class supports the following template modifiers: `l`, `x`, `e`, `r`
 
 error: invalid asm template modifier for this register class
-  --> $DIR/bad-reg.rs:20:15
+  --> $DIR/bad-reg.rs:18:15
    |
 LL |         asm!("{:r}", in(xmm_reg) foo);
    |               ^^^^   --------------- argument
@@ -31,7 +31,7 @@ LL |         asm!("{:r}", in(xmm_reg) foo);
    = note: the `xmm_reg` register class supports the following template modifiers: `x`, `y`, `z`
 
 error: asm template modifiers are not allowed for `const` arguments
-  --> $DIR/bad-reg.rs:22:15
+  --> $DIR/bad-reg.rs:20:15
    |
 LL |         asm!("{:a}", const 0);
    |               ^^^^   ------- argument
@@ -39,7 +39,7 @@ LL |         asm!("{:a}", const 0);
    |               template modifier
 
 error: asm template modifiers are not allowed for `sym` arguments
-  --> $DIR/bad-reg.rs:24:15
+  --> $DIR/bad-reg.rs:22:15
    |
 LL |         asm!("{:a}", sym main);
    |               ^^^^   -------- argument
@@ -47,67 +47,67 @@ LL |         asm!("{:a}", sym main);
    |               template modifier
 
 error: invalid register `ebp`: the frame pointer cannot be used as an operand for inline asm
-  --> $DIR/bad-reg.rs:26:18
+  --> $DIR/bad-reg.rs:24:18
    |
 LL |         asm!("", in("ebp") foo);
    |                  ^^^^^^^^^^^^^
 
 error: invalid register `rsp`: the stack pointer cannot be used as an operand for inline asm
-  --> $DIR/bad-reg.rs:28:18
+  --> $DIR/bad-reg.rs:26:18
    |
 LL |         asm!("", in("rsp") foo);
    |                  ^^^^^^^^^^^^^
 
 error: invalid register `ip`: the instruction pointer cannot be used as an operand for inline asm
-  --> $DIR/bad-reg.rs:30:18
+  --> $DIR/bad-reg.rs:28:18
    |
 LL |         asm!("", in("ip") foo);
    |                  ^^^^^^^^^^^^
 
 error: register class `x87_reg` can only be used as a clobber, not as an input or output
-  --> $DIR/bad-reg.rs:33:18
+  --> $DIR/bad-reg.rs:31:18
    |
 LL |         asm!("", in("st(2)") foo);
    |                  ^^^^^^^^^^^^^^^
 
 error: register class `mmx_reg` can only be used as a clobber, not as an input or output
-  --> $DIR/bad-reg.rs:36:18
+  --> $DIR/bad-reg.rs:34:18
    |
 LL |         asm!("", in("mm0") foo);
    |                  ^^^^^^^^^^^^^
 
 error: register class `kreg0` can only be used as a clobber, not as an input or output
-  --> $DIR/bad-reg.rs:39:18
+  --> $DIR/bad-reg.rs:37:18
    |
 LL |         asm!("", in("k0") foo);
    |                  ^^^^^^^^^^^^
 
 error: register class `x87_reg` can only be used as a clobber, not as an input or output
-  --> $DIR/bad-reg.rs:44:20
+  --> $DIR/bad-reg.rs:42:20
    |
 LL |         asm!("{}", in(x87_reg) foo);
    |                    ^^^^^^^^^^^^^^^
 
 error: register class `mmx_reg` can only be used as a clobber, not as an input or output
-  --> $DIR/bad-reg.rs:47:20
+  --> $DIR/bad-reg.rs:45:20
    |
 LL |         asm!("{}", in(mmx_reg) foo);
    |                    ^^^^^^^^^^^^^^^
 
 error: register class `x87_reg` can only be used as a clobber, not as an input or output
-  --> $DIR/bad-reg.rs:50:20
+  --> $DIR/bad-reg.rs:48:20
    |
 LL |         asm!("{}", out(x87_reg) _);
    |                    ^^^^^^^^^^^^^^
 
 error: register class `mmx_reg` can only be used as a clobber, not as an input or output
-  --> $DIR/bad-reg.rs:52:20
+  --> $DIR/bad-reg.rs:50:20
    |
 LL |         asm!("{}", out(mmx_reg) _);
    |                    ^^^^^^^^^^^^^^
 
 error: register `al` conflicts with register `eax`
-  --> $DIR/bad-reg.rs:58:33
+  --> $DIR/bad-reg.rs:56:33
    |
 LL |         asm!("", in("eax") foo, in("al") bar);
    |                  -------------  ^^^^^^^^^^^^ register `al`
@@ -115,7 +115,7 @@ LL |         asm!("", in("eax") foo, in("al") bar);
    |                  register `eax`
 
 error: register `rax` conflicts with register `rax`
-  --> $DIR/bad-reg.rs:61:33
+  --> $DIR/bad-reg.rs:59:33
    |
 LL |         asm!("", in("rax") foo, out("rax") bar);
    |                  -------------  ^^^^^^^^^^^^^^ register `rax`
@@ -123,13 +123,13 @@ LL |         asm!("", in("rax") foo, out("rax") bar);
    |                  register `rax`
    |
 help: use `lateout` instead of `out` to avoid conflict
-  --> $DIR/bad-reg.rs:61:18
+  --> $DIR/bad-reg.rs:59:18
    |
 LL |         asm!("", in("rax") foo, out("rax") bar);
    |                  ^^^^^^^^^^^^^
 
 error: register `ymm0` conflicts with register `xmm0`
-  --> $DIR/bad-reg.rs:66:34
+  --> $DIR/bad-reg.rs:64:34
    |
 LL |         asm!("", in("xmm0") foo, in("ymm0") bar);
    |                  --------------  ^^^^^^^^^^^^^^ register `ymm0`
@@ -137,7 +137,7 @@ LL |         asm!("", in("xmm0") foo, in("ymm0") bar);
    |                  register `xmm0`
 
 error: register `ymm0` conflicts with register `xmm0`
-  --> $DIR/bad-reg.rs:68:34
+  --> $DIR/bad-reg.rs:66:34
    |
 LL |         asm!("", in("xmm0") foo, out("ymm0") bar);
    |                  --------------  ^^^^^^^^^^^^^^^ register `ymm0`
@@ -145,13 +145,13 @@ LL |         asm!("", in("xmm0") foo, out("ymm0") bar);
    |                  register `xmm0`
    |
 help: use `lateout` instead of `out` to avoid conflict
-  --> $DIR/bad-reg.rs:68:18
+  --> $DIR/bad-reg.rs:66:18
    |
 LL |         asm!("", in("xmm0") foo, out("ymm0") bar);
    |                  ^^^^^^^^^^^^^^
 
 error: type `i32` cannot be used with this register class
-  --> $DIR/bad-reg.rs:33:30
+  --> $DIR/bad-reg.rs:31:30
    |
 LL |         asm!("", in("st(2)") foo);
    |                              ^^^
@@ -159,7 +159,7 @@ LL |         asm!("", in("st(2)") foo);
    = note: register class `x87_reg` supports these types: 
 
 error: type `i32` cannot be used with this register class
-  --> $DIR/bad-reg.rs:36:28
+  --> $DIR/bad-reg.rs:34:28
    |
 LL |         asm!("", in("mm0") foo);
    |                            ^^^
@@ -167,7 +167,7 @@ LL |         asm!("", in("mm0") foo);
    = note: register class `mmx_reg` supports these types: 
 
 error: type `i32` cannot be used with this register class
-  --> $DIR/bad-reg.rs:39:27
+  --> $DIR/bad-reg.rs:37:27
    |
 LL |         asm!("", in("k0") foo);
    |                           ^^^
@@ -175,7 +175,7 @@ LL |         asm!("", in("k0") foo);
    = note: register class `kreg0` supports these types: 
 
 error: type `i32` cannot be used with this register class
-  --> $DIR/bad-reg.rs:44:32
+  --> $DIR/bad-reg.rs:42:32
    |
 LL |         asm!("{}", in(x87_reg) foo);
    |                                ^^^
@@ -183,7 +183,7 @@ LL |         asm!("{}", in(x87_reg) foo);
    = note: register class `x87_reg` supports these types: 
 
 error: type `i32` cannot be used with this register class
-  --> $DIR/bad-reg.rs:47:32
+  --> $DIR/bad-reg.rs:45:32
    |
 LL |         asm!("{}", in(mmx_reg) foo);
    |                                ^^^
@@ -191,7 +191,7 @@ LL |         asm!("{}", in(mmx_reg) foo);
    = note: register class `mmx_reg` supports these types: 
 
 error: type `i32` cannot be used with this register class
-  --> $DIR/bad-reg.rs:58:42
+  --> $DIR/bad-reg.rs:56:42
    |
 LL |         asm!("", in("eax") foo, in("al") bar);
    |                                          ^^^
@@ -199,7 +199,7 @@ LL |         asm!("", in("eax") foo, in("al") bar);
    = note: register class `reg_byte` supports these types: i8
 
 error: type `i32` cannot be used with this register class
-  --> $DIR/bad-reg.rs:63:27
+  --> $DIR/bad-reg.rs:61:27
    |
 LL |         asm!("", in("al") foo, lateout("al") bar);
    |                           ^^^
@@ -207,7 +207,7 @@ LL |         asm!("", in("al") foo, lateout("al") bar);
    = note: register class `reg_byte` supports these types: i8
 
 error: type `i32` cannot be used with this register class
-  --> $DIR/bad-reg.rs:63:46
+  --> $DIR/bad-reg.rs:61:46
    |
 LL |         asm!("", in("al") foo, lateout("al") bar);
    |                                              ^^^

tests/ui/asm/x86_64/const.rs

@@ -2,8 +2,6 @@
 //@ run-pass
 //@ needs-asm-support
 
-#![feature(asm_const)]
-
 use std::arch::{asm, global_asm};
 
 fn const_generic<const X: usize>() -> usize {

tests/ui/asm/x86_64/type-check-3.rs

@@ -1,8 +1,6 @@
 //@ only-x86_64
 //@ compile-flags: -C target-feature=+avx512f
 
-#![feature(asm_const)]
-
 use std::arch::{asm, global_asm};
 
 use std::arch::x86_64::{_mm256_setzero_ps, _mm_setzero_ps};

tests/ui/asm/x86_64/type-check-3.stderr

@@ -1,5 +1,5 @@
 error: type `i128` cannot be used with this register class
-  --> $DIR/type-check-3.rs:14:28
+  --> $DIR/type-check-3.rs:12:28
    |
 LL |         asm!("{}", in(reg) 0i128);
    |                            ^^^^^
@@ -7,7 +7,7 @@ LL |         asm!("{}", in(reg) 0i128);
    = note: register class `reg` supports these types: i16, i32, i64, f16, f32, f64
 
 error: type `__m128` cannot be used with this register class
-  --> $DIR/type-check-3.rs:16:28
+  --> $DIR/type-check-3.rs:14:28
    |
 LL |         asm!("{}", in(reg) _mm_setzero_ps());
    |                            ^^^^^^^^^^^^^^^^
@@ -15,7 +15,7 @@ LL |         asm!("{}", in(reg) _mm_setzero_ps());
    = note: register class `reg` supports these types: i16, i32, i64, f16, f32, f64
 
 error: type `__m256` cannot be used with this register class
-  --> $DIR/type-check-3.rs:18:28
+  --> $DIR/type-check-3.rs:16:28
    |
 LL |         asm!("{}", in(reg) _mm256_setzero_ps());
    |                            ^^^^^^^^^^^^^^^^^^^
@@ -23,7 +23,7 @@ LL |         asm!("{}", in(reg) _mm256_setzero_ps());
    = note: register class `reg` supports these types: i16, i32, i64, f16, f32, f64
 
 error: type `u8` cannot be used with this register class
-  --> $DIR/type-check-3.rs:20:32
+  --> $DIR/type-check-3.rs:18:32
    |
 LL |         asm!("{}", in(xmm_reg) 0u8);
    |                                ^^^
@@ -31,7 +31,7 @@ LL |         asm!("{}", in(xmm_reg) 0u8);
    = note: register class `xmm_reg` supports these types: i32, i64, f16, f32, f64, f128, i8x16, i16x8, i32x4, i64x2, f16x8, f32x4, f64x2
 
 error: `avx512bw` target feature is not enabled
-  --> $DIR/type-check-3.rs:29:29
+  --> $DIR/type-check-3.rs:27:29
    |
 LL |         asm!("{}", in(kreg) 0u64);
    |                             ^^^^
@@ -39,7 +39,7 @@ LL |         asm!("{}", in(kreg) 0u64);
    = note: this is required to use type `u64` with register class `kreg`
 
 warning: formatting may not be suitable for sub-register argument
-  --> $DIR/type-check-3.rs:34:15
+  --> $DIR/type-check-3.rs:32:15
    |
 LL |         asm!("{0} {0}", in(reg) 0i16);
    |               ^^^ ^^^           ---- for this argument
@@ -49,7 +49,7 @@ LL |         asm!("{0} {0}", in(reg) 0i16);
    = note: `#[warn(asm_sub_register)]` on by default
 
 warning: formatting may not be suitable for sub-register argument
-  --> $DIR/type-check-3.rs:36:15
+  --> $DIR/type-check-3.rs:34:15
    |
 LL |         asm!("{0} {0:x}", in(reg) 0i16);
    |               ^^^                 ---- for this argument
@@ -58,7 +58,7 @@ LL |         asm!("{0} {0:x}", in(reg) 0i16);
    = help: or use `{0:r}` to keep the default formatting of `rax` (for 64-bit values)
 
 warning: formatting may not be suitable for sub-register argument
-  --> $DIR/type-check-3.rs:38:15
+  --> $DIR/type-check-3.rs:36:15
    |
 LL |         asm!("{}", in(reg) 0i32);
    |               ^^           ---- for this argument
@@ -67,7 +67,7 @@ LL |         asm!("{}", in(reg) 0i32);
    = help: or use `{0:r}` to keep the default formatting of `rax` (for 64-bit values)
 
 warning: formatting may not be suitable for sub-register argument
-  --> $DIR/type-check-3.rs:41:15
+  --> $DIR/type-check-3.rs:39:15
    |
 LL |         asm!("{}", in(ymm_reg) 0i64);
    |               ^^               ---- for this argument
@@ -76,7 +76,7 @@ LL |         asm!("{}", in(ymm_reg) 0i64);
    = help: or use `{0:y}` to keep the default formatting of `ymm0` (for 256-bit values)
 
 error: type `i8` cannot be used with this register class
-  --> $DIR/type-check-3.rs:52:28
+  --> $DIR/type-check-3.rs:50:28
    |
 LL |         asm!("{}", in(reg) 0i8);
    |                            ^^^
@@ -85,7 +85,7 @@ LL |         asm!("{}", in(reg) 0i8);
    = help: consider using the `reg_byte` register class instead
 
 error: incompatible types for asm inout argument
-  --> $DIR/type-check-3.rs:64:33
+  --> $DIR/type-check-3.rs:62:33
    |
 LL |         asm!("{:r}", inout(reg) 0u32 => val_f32);
    |                                 ^^^^    ^^^^^^^ type `f32`
@@ -95,7 +95,7 @@ LL |         asm!("{:r}", inout(reg) 0u32 => val_f32);
    = note: asm inout arguments must have the same type, unless they are both pointers or integers of the same size
 
 error: incompatible types for asm inout argument
-  --> $DIR/type-check-3.rs:66:33
+  --> $DIR/type-check-3.rs:64:33
    |
 LL |         asm!("{:r}", inout(reg) 0u32 => val_ptr);
    |                                 ^^^^    ^^^^^^^ type `*mut u8`
@@ -105,7 +105,7 @@ LL |         asm!("{:r}", inout(reg) 0u32 => val_ptr);
    = note: asm inout arguments must have the same type, unless they are both pointers or integers of the same size
 
 error: incompatible types for asm inout argument
-  --> $DIR/type-check-3.rs:68:33
+  --> $DIR/type-check-3.rs:66:33
    |
 LL |         asm!("{:r}", inout(reg) main => val_u32);
    |                                 ^^^^    ^^^^^^^ type `u32`

tests/ui/asm/x86_64/type-check-4.rs

@@ -1,8 +1,6 @@
 //@ only-x86_64
 //@ compile-flags: -C target-feature=+avx512f
 
-#![feature(asm_const)]
-
 use std::arch::{asm, global_asm};
 
 use std::arch::x86_64::{_mm256_setzero_ps, _mm_setzero_ps};

tests/ui/asm/x86_64/type-check-4.stderr

@@ -1,5 +1,5 @@
 error[E0658]: referencing statics in constants is unstable
-  --> $DIR/type-check-4.rs:21:25
+  --> $DIR/type-check-4.rs:19:25
    |
 LL | global_asm!("{}", const S);
    |                         ^
@@ -11,7 +11,7 @@ LL | global_asm!("{}", const S);
    = help: to fix this, the value can be extracted to a `const` and then used.
 
 error[E0658]: referencing statics in constants is unstable
-  --> $DIR/type-check-4.rs:24:35
+  --> $DIR/type-check-4.rs:22:35
    |
 LL | global_asm!("{}", const const_foo(S));
    |                                   ^
@@ -23,7 +23,7 @@ LL | global_asm!("{}", const const_foo(S));
    = help: to fix this, the value can be extracted to a `const` and then used.
 
 error[E0658]: referencing statics in constants is unstable
-  --> $DIR/type-check-4.rs:27:35
+  --> $DIR/type-check-4.rs:25:35
    |
 LL | global_asm!("{}", const const_bar(S));
    |                                   ^

tests/ui/asm/x86_64/x86_64_parse_error.rs

@@ -1,7 +1,5 @@
 //@ only-x86_64
 
-#![feature(asm_const)]
-
 use std::arch::asm;
 
 fn main() {

tests/ui/asm/x86_64/x86_64_parse_error.stderr

@@ -1,17 +1,28 @@
 error: explicit register arguments cannot have names
-  --> $DIR/x86_64_parse_error.rs:11:18
+  --> $DIR/x86_64_parse_error.rs:9:18
    |
 LL |         asm!("", a = in("eax") foo);
    |                  ^^^^^^^^^^^^^^^^^
 
 error: positional arguments cannot follow named arguments or explicit register arguments
-  --> $DIR/x86_64_parse_error.rs:17:36
+  --> $DIR/x86_64_parse_error.rs:15:36
    |
 LL |         asm!("{1}", in("eax") foo, const bar);
    |                     -------------  ^^^^^^^^^ positional argument
    |                     |
    |                     explicit register argument
 
+error[E0435]: attempt to use a non-constant value in a constant
+  --> $DIR/x86_64_parse_error.rs:11:46
+   |
+LL |         asm!("{a}", in("eax") foo, a = const bar);
+   |                                              ^^^ non-constant value
+   |
+help: consider using `const` instead of `let`
+   |
+LL |     const bar: /* Type */ = 0;
+   |     ~~~~~    ++++++++++++
+
 error[E0435]: attempt to use a non-constant value in a constant
   --> $DIR/x86_64_parse_error.rs:13:46
    |
@@ -24,18 +35,7 @@ LL |     const bar: /* Type */ = 0;
    |     ~~~~~    ++++++++++++
 
 error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/x86_64_parse_error.rs:15:46
+  --> $DIR/x86_64_parse_error.rs:15:42
-   |
-LL |         asm!("{a}", in("eax") foo, a = const bar);
-   |                                              ^^^ non-constant value
-   |
-help: consider using `const` instead of `let`
-   |
-LL |     const bar: /* Type */ = 0;
-   |     ~~~~~    ++++++++++++
-
-error[E0435]: attempt to use a non-constant value in a constant
-  --> $DIR/x86_64_parse_error.rs:17:42
    |
 LL |         asm!("{1}", in("eax") foo, const bar);
    |                                          ^^^ non-constant value

tests/ui/feature-gates/feature-gate-asm_const.rs

@@ -1,16 +0,0 @@
-//@ only-x86_64
-
-use std::arch::asm;
-
-unsafe fn foo<const N: usize>() {
-    asm!("mov eax, {}", const N + 1);
-    //~^ ERROR const operands for inline assembly are unstable
-}
-
-fn main() {
-    unsafe {
-        foo::<0>();
-        asm!("mov eax, {}", const 123);
-        //~^ ERROR const operands for inline assembly are unstable
-    }
-}

tests/ui/feature-gates/feature-gate-asm_const.stderr

@@ -1,23 +0,0 @@
-error[E0658]: const operands for inline assembly are unstable
-  --> $DIR/feature-gate-asm_const.rs:6:25
-   |
-LL |     asm!("mov eax, {}", const N + 1);
-   |                         ^^^^^^^^^^^
-   |
-   = note: see issue #93332 <https://github.com/rust-lang/rust/issues/93332> for more information
-   = help: add `#![feature(asm_const)]` to the crate attributes to enable
-   = note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
-
-error[E0658]: const operands for inline assembly are unstable
-  --> $DIR/feature-gate-asm_const.rs:13:29
-   |
-LL |         asm!("mov eax, {}", const 123);
-   |                             ^^^^^^^^^
-   |
-   = note: see issue #93332 <https://github.com/rust-lang/rust/issues/93332> for more information
-   = help: add `#![feature(asm_const)]` to the crate attributes to enable
-   = note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
-
-error: aborting due to 2 previous errors
-
-For more information about this error, try `rustc --explain E0658`.