rust/tests/ui/threads-sendsync/task-comm-16.rs

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

111 lines
2.5 KiB
Rust
Raw Normal View History

//@ run-pass
#![allow(unused_mut)]
#![allow(unused_parens)]
#![allow(non_camel_case_types)]
use std::cmp;
use std::sync::mpsc::channel;
// Tests of ports and channels on various types
fn test_rec() {
struct R {
val0: isize,
val1: u8,
val2: char,
}
let (tx, rx) = channel();
let r0: R = R { val0: 0, val1: 1, val2: '2' };
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change]
2014-12-23 19:53:35 +00:00
tx.send(r0).unwrap();
let mut r1: R;
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change]
2014-12-23 19:53:35 +00:00
r1 = rx.recv().unwrap();
assert_eq!(r1.val0, 0);
assert_eq!(r1.val1, 1);
assert_eq!(r1.val2, '2');
}
2011-04-19 20:35:49 +00:00
fn test_vec() {
let (tx, rx) = channel();
let v0: Vec<isize> = vec![0, 1, 2];
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change]
2014-12-23 19:53:35 +00:00
tx.send(v0).unwrap();
let v1 = rx.recv().unwrap();
assert_eq!(v1[0], 0);
assert_eq!(v1[1], 1);
assert_eq!(v1[2], 2);
}
2011-04-19 20:35:49 +00:00
fn test_str() {
let (tx, rx) = channel();
2014-05-25 10:10:11 +00:00
let s0 = "test".to_string();
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change]
2014-12-23 19:53:35 +00:00
tx.send(s0).unwrap();
let s1 = rx.recv().unwrap();
assert_eq!(s1.as_bytes()[0], 't' as u8);
assert_eq!(s1.as_bytes()[1], 'e' as u8);
assert_eq!(s1.as_bytes()[2], 's' as u8);
assert_eq!(s1.as_bytes()[3], 't' as u8);
}
2015-01-28 13:34:18 +00:00
#[derive(Debug)]
2012-08-27 23:26:35 +00:00
enum t {
tag1,
tag2(isize),
tag3(isize, u8, char),
2012-08-27 23:26:35 +00:00
}
impl cmp::PartialEq for t {
fn eq(&self, other: &t) -> bool {
match *self {
t::tag1 => match (*other) {
t::tag1 => true,
_ => false,
},
t::tag2(e0a) => match (*other) {
t::tag2(e0b) => e0a == e0b,
_ => false,
},
t::tag3(e0a, e1a, e2a) => match (*other) {
t::tag3(e0b, e1b, e2b) => e0a == e0b && e1a == e1b && e2a == e2b,
_ => false,
},
2012-08-27 23:26:35 +00:00
}
}
fn ne(&self, other: &t) -> bool {
!(*self).eq(other)
}
2012-08-27 23:26:35 +00:00
}
2011-04-19 20:35:49 +00:00
fn test_tag() {
let (tx, rx) = channel();
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change]
2014-12-23 19:53:35 +00:00
tx.send(t::tag1).unwrap();
tx.send(t::tag2(10)).unwrap();
tx.send(t::tag3(10, 11, 'A')).unwrap();
let mut t1: t;
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change]
2014-12-23 19:53:35 +00:00
t1 = rx.recv().unwrap();
assert_eq!(t1, t::tag1);
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change]
2014-12-23 19:53:35 +00:00
t1 = rx.recv().unwrap();
assert_eq!(t1, t::tag2(10));
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change]
2014-12-23 19:53:35 +00:00
t1 = rx.recv().unwrap();
assert_eq!(t1, t::tag3(10, 11, 'A'));
}
2011-04-19 20:35:49 +00:00
fn test_chan() {
let (tx1, rx1) = channel();
let (tx2, rx2) = channel();
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change]
2014-12-23 19:53:35 +00:00
tx1.send(tx2).unwrap();
let tx2 = rx1.recv().unwrap();
// Does the transmitted channel still work?
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change]
2014-12-23 19:53:35 +00:00
tx2.send(10).unwrap();
let mut i: isize;
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change]
2014-12-23 19:53:35 +00:00
i = rx2.recv().unwrap();
assert_eq!(i, 10);
}
pub fn main() {
2012-07-25 21:05:06 +00:00
test_rec();
test_vec();
test_str();
test_tag();
test_chan();
}