rust/src/libstd/net/mod.rs

108 lines
3.4 KiB
Rust
Raw Normal View History

// Copyright 2015 The Rust Project Developers. See the COPYRIGHT
// file at the top-level directory of this distribution and at
// http://rust-lang.org/COPYRIGHT.
//
// Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or
// http://www.apache.org/licenses/LICENSE-2.0> or the MIT license
// <LICENSE-MIT or http://opensource.org/licenses/MIT>, at your
// option. This file may not be copied, modified, or distributed
// except according to those terms.
//! Networking primitives for TCP/UDP communication
//!
//! > **NOTE**: This module is very much a work in progress and is under active
2015-03-15 15:31:38 +00:00
//! > development.
std: Stabilize the `net` module This commit performs a stabilization pass over the std::net module, incorporating the changes from RFC 923. Specifically, the following actions were taken: Stable functionality: * `net` (the name) * `Shutdown` * `Shutdown::{Read, Write, Both}` * `lookup_host` * `LookupHost` * `SocketAddr` * `SocketAddr::{V4, V6}` * `SocketAddr::port` * `SocketAddrV4` * `SocketAddrV4::{new, ip, port}` * `SocketAddrV6` * `SocketAddrV4::{new, ip, port, flowinfo, scope_id}` * Common trait impls for socket addr structures * `ToSocketAddrs` * `ToSocketAddrs::Iter` * `ToSocketAddrs::to_socket_addrs` * `ToSocketAddrs for {SocketAddr*, (Ipv*Addr, u16), str, (str, u16)}` * `Ipv4Addr` * `Ipv4Addr::{new, octets, to_ipv6_compatible, to_ipv6_mapped}` * `Ipv6Addr` * `Ipv6Addr::{new, segments, to_ipv4}` * `TcpStream` * `TcpStream::connect` * `TcpStream::{peer_addr, local_addr, shutdown, try_clone}` * `{Read,Write} for {TcpStream, &TcpStream}` * `TcpListener` * `TcpListener::bind` * `TcpListener::{local_addr, try_clone, accept, incoming}` * `Incoming` * `UdpSocket` * `UdpSocket::bind` * `UdpSocket::{recv_from, send_to, local_addr, try_clone}` Unstable functionality: * Extra methods on `Ipv{4,6}Addr` for various methods of inspecting the address and determining qualities of it. * Extra methods on `TcpStream` to configure various protocol options. * Extra methods on `UdpSocket` to configure various protocol options. Deprecated functionality: * The `socket_addr` method has been renamed to `local_addr` This commit is a breaking change due to the restructuring of the `SocketAddr` type as well as the renaming of the `socket_addr` method. Migration should be fairly straightforward, however, after accounting for the new level of abstraction in `SocketAddr` (protocol distinction at the socket address level, not the IP address). [breaking-change]
2015-03-13 21:22:33 +00:00
#![stable(feature = "rust1", since = "1.0.0")]
use prelude::v1::*;
use io::{self, Error, ErrorKind};
use num::Int;
use sys_common::net2 as net_imp;
std: Stabilize the `net` module This commit performs a stabilization pass over the std::net module, incorporating the changes from RFC 923. Specifically, the following actions were taken: Stable functionality: * `net` (the name) * `Shutdown` * `Shutdown::{Read, Write, Both}` * `lookup_host` * `LookupHost` * `SocketAddr` * `SocketAddr::{V4, V6}` * `SocketAddr::port` * `SocketAddrV4` * `SocketAddrV4::{new, ip, port}` * `SocketAddrV6` * `SocketAddrV4::{new, ip, port, flowinfo, scope_id}` * Common trait impls for socket addr structures * `ToSocketAddrs` * `ToSocketAddrs::Iter` * `ToSocketAddrs::to_socket_addrs` * `ToSocketAddrs for {SocketAddr*, (Ipv*Addr, u16), str, (str, u16)}` * `Ipv4Addr` * `Ipv4Addr::{new, octets, to_ipv6_compatible, to_ipv6_mapped}` * `Ipv6Addr` * `Ipv6Addr::{new, segments, to_ipv4}` * `TcpStream` * `TcpStream::connect` * `TcpStream::{peer_addr, local_addr, shutdown, try_clone}` * `{Read,Write} for {TcpStream, &TcpStream}` * `TcpListener` * `TcpListener::bind` * `TcpListener::{local_addr, try_clone, accept, incoming}` * `Incoming` * `UdpSocket` * `UdpSocket::bind` * `UdpSocket::{recv_from, send_to, local_addr, try_clone}` Unstable functionality: * Extra methods on `Ipv{4,6}Addr` for various methods of inspecting the address and determining qualities of it. * Extra methods on `TcpStream` to configure various protocol options. * Extra methods on `UdpSocket` to configure various protocol options. Deprecated functionality: * The `socket_addr` method has been renamed to `local_addr` This commit is a breaking change due to the restructuring of the `SocketAddr` type as well as the renaming of the `socket_addr` method. Migration should be fairly straightforward, however, after accounting for the new level of abstraction in `SocketAddr` (protocol distinction at the socket address level, not the IP address). [breaking-change]
2015-03-13 21:22:33 +00:00
pub use self::ip::{Ipv4Addr, Ipv6Addr, Ipv6MulticastScope};
pub use self::addr::{SocketAddr, SocketAddrV4, SocketAddrV6, ToSocketAddrs};
pub use self::tcp::{TcpStream, TcpListener};
pub use self::udp::UdpSocket;
pub use self::parser::AddrParseError;
mod ip;
mod addr;
mod tcp;
mod udp;
mod parser;
#[cfg(test)] mod test;
/// Possible values which can be passed to the `shutdown` method of `TcpStream`
/// and `UdpSocket`.
#[derive(Copy, Clone, PartialEq)]
std: Stabilize the `net` module This commit performs a stabilization pass over the std::net module, incorporating the changes from RFC 923. Specifically, the following actions were taken: Stable functionality: * `net` (the name) * `Shutdown` * `Shutdown::{Read, Write, Both}` * `lookup_host` * `LookupHost` * `SocketAddr` * `SocketAddr::{V4, V6}` * `SocketAddr::port` * `SocketAddrV4` * `SocketAddrV4::{new, ip, port}` * `SocketAddrV6` * `SocketAddrV4::{new, ip, port, flowinfo, scope_id}` * Common trait impls for socket addr structures * `ToSocketAddrs` * `ToSocketAddrs::Iter` * `ToSocketAddrs::to_socket_addrs` * `ToSocketAddrs for {SocketAddr*, (Ipv*Addr, u16), str, (str, u16)}` * `Ipv4Addr` * `Ipv4Addr::{new, octets, to_ipv6_compatible, to_ipv6_mapped}` * `Ipv6Addr` * `Ipv6Addr::{new, segments, to_ipv4}` * `TcpStream` * `TcpStream::connect` * `TcpStream::{peer_addr, local_addr, shutdown, try_clone}` * `{Read,Write} for {TcpStream, &TcpStream}` * `TcpListener` * `TcpListener::bind` * `TcpListener::{local_addr, try_clone, accept, incoming}` * `Incoming` * `UdpSocket` * `UdpSocket::bind` * `UdpSocket::{recv_from, send_to, local_addr, try_clone}` Unstable functionality: * Extra methods on `Ipv{4,6}Addr` for various methods of inspecting the address and determining qualities of it. * Extra methods on `TcpStream` to configure various protocol options. * Extra methods on `UdpSocket` to configure various protocol options. Deprecated functionality: * The `socket_addr` method has been renamed to `local_addr` This commit is a breaking change due to the restructuring of the `SocketAddr` type as well as the renaming of the `socket_addr` method. Migration should be fairly straightforward, however, after accounting for the new level of abstraction in `SocketAddr` (protocol distinction at the socket address level, not the IP address). [breaking-change]
2015-03-13 21:22:33 +00:00
#[stable(feature = "rust1", since = "1.0.0")]
pub enum Shutdown {
/// Indicates that the reading portion of this stream/socket should be shut
/// down. All currently blocked and future reads will return `Ok(0)`.
std: Stabilize the `net` module This commit performs a stabilization pass over the std::net module, incorporating the changes from RFC 923. Specifically, the following actions were taken: Stable functionality: * `net` (the name) * `Shutdown` * `Shutdown::{Read, Write, Both}` * `lookup_host` * `LookupHost` * `SocketAddr` * `SocketAddr::{V4, V6}` * `SocketAddr::port` * `SocketAddrV4` * `SocketAddrV4::{new, ip, port}` * `SocketAddrV6` * `SocketAddrV4::{new, ip, port, flowinfo, scope_id}` * Common trait impls for socket addr structures * `ToSocketAddrs` * `ToSocketAddrs::Iter` * `ToSocketAddrs::to_socket_addrs` * `ToSocketAddrs for {SocketAddr*, (Ipv*Addr, u16), str, (str, u16)}` * `Ipv4Addr` * `Ipv4Addr::{new, octets, to_ipv6_compatible, to_ipv6_mapped}` * `Ipv6Addr` * `Ipv6Addr::{new, segments, to_ipv4}` * `TcpStream` * `TcpStream::connect` * `TcpStream::{peer_addr, local_addr, shutdown, try_clone}` * `{Read,Write} for {TcpStream, &TcpStream}` * `TcpListener` * `TcpListener::bind` * `TcpListener::{local_addr, try_clone, accept, incoming}` * `Incoming` * `UdpSocket` * `UdpSocket::bind` * `UdpSocket::{recv_from, send_to, local_addr, try_clone}` Unstable functionality: * Extra methods on `Ipv{4,6}Addr` for various methods of inspecting the address and determining qualities of it. * Extra methods on `TcpStream` to configure various protocol options. * Extra methods on `UdpSocket` to configure various protocol options. Deprecated functionality: * The `socket_addr` method has been renamed to `local_addr` This commit is a breaking change due to the restructuring of the `SocketAddr` type as well as the renaming of the `socket_addr` method. Migration should be fairly straightforward, however, after accounting for the new level of abstraction in `SocketAddr` (protocol distinction at the socket address level, not the IP address). [breaking-change]
2015-03-13 21:22:33 +00:00
#[stable(feature = "rust1", since = "1.0.0")]
Read,
/// Indicates that the writing portion of this stream/socket should be shut
/// down. All currently blocked and future writes will return an error.
std: Stabilize the `net` module This commit performs a stabilization pass over the std::net module, incorporating the changes from RFC 923. Specifically, the following actions were taken: Stable functionality: * `net` (the name) * `Shutdown` * `Shutdown::{Read, Write, Both}` * `lookup_host` * `LookupHost` * `SocketAddr` * `SocketAddr::{V4, V6}` * `SocketAddr::port` * `SocketAddrV4` * `SocketAddrV4::{new, ip, port}` * `SocketAddrV6` * `SocketAddrV4::{new, ip, port, flowinfo, scope_id}` * Common trait impls for socket addr structures * `ToSocketAddrs` * `ToSocketAddrs::Iter` * `ToSocketAddrs::to_socket_addrs` * `ToSocketAddrs for {SocketAddr*, (Ipv*Addr, u16), str, (str, u16)}` * `Ipv4Addr` * `Ipv4Addr::{new, octets, to_ipv6_compatible, to_ipv6_mapped}` * `Ipv6Addr` * `Ipv6Addr::{new, segments, to_ipv4}` * `TcpStream` * `TcpStream::connect` * `TcpStream::{peer_addr, local_addr, shutdown, try_clone}` * `{Read,Write} for {TcpStream, &TcpStream}` * `TcpListener` * `TcpListener::bind` * `TcpListener::{local_addr, try_clone, accept, incoming}` * `Incoming` * `UdpSocket` * `UdpSocket::bind` * `UdpSocket::{recv_from, send_to, local_addr, try_clone}` Unstable functionality: * Extra methods on `Ipv{4,6}Addr` for various methods of inspecting the address and determining qualities of it. * Extra methods on `TcpStream` to configure various protocol options. * Extra methods on `UdpSocket` to configure various protocol options. Deprecated functionality: * The `socket_addr` method has been renamed to `local_addr` This commit is a breaking change due to the restructuring of the `SocketAddr` type as well as the renaming of the `socket_addr` method. Migration should be fairly straightforward, however, after accounting for the new level of abstraction in `SocketAddr` (protocol distinction at the socket address level, not the IP address). [breaking-change]
2015-03-13 21:22:33 +00:00
#[stable(feature = "rust1", since = "1.0.0")]
Write,
/// Shut down both the reading and writing portions of this stream.
///
/// See `Shutdown::Read` and `Shutdown::Write` for more information.
std: Stabilize the `net` module This commit performs a stabilization pass over the std::net module, incorporating the changes from RFC 923. Specifically, the following actions were taken: Stable functionality: * `net` (the name) * `Shutdown` * `Shutdown::{Read, Write, Both}` * `lookup_host` * `LookupHost` * `SocketAddr` * `SocketAddr::{V4, V6}` * `SocketAddr::port` * `SocketAddrV4` * `SocketAddrV4::{new, ip, port}` * `SocketAddrV6` * `SocketAddrV4::{new, ip, port, flowinfo, scope_id}` * Common trait impls for socket addr structures * `ToSocketAddrs` * `ToSocketAddrs::Iter` * `ToSocketAddrs::to_socket_addrs` * `ToSocketAddrs for {SocketAddr*, (Ipv*Addr, u16), str, (str, u16)}` * `Ipv4Addr` * `Ipv4Addr::{new, octets, to_ipv6_compatible, to_ipv6_mapped}` * `Ipv6Addr` * `Ipv6Addr::{new, segments, to_ipv4}` * `TcpStream` * `TcpStream::connect` * `TcpStream::{peer_addr, local_addr, shutdown, try_clone}` * `{Read,Write} for {TcpStream, &TcpStream}` * `TcpListener` * `TcpListener::bind` * `TcpListener::{local_addr, try_clone, accept, incoming}` * `Incoming` * `UdpSocket` * `UdpSocket::bind` * `UdpSocket::{recv_from, send_to, local_addr, try_clone}` Unstable functionality: * Extra methods on `Ipv{4,6}Addr` for various methods of inspecting the address and determining qualities of it. * Extra methods on `TcpStream` to configure various protocol options. * Extra methods on `UdpSocket` to configure various protocol options. Deprecated functionality: * The `socket_addr` method has been renamed to `local_addr` This commit is a breaking change due to the restructuring of the `SocketAddr` type as well as the renaming of the `socket_addr` method. Migration should be fairly straightforward, however, after accounting for the new level of abstraction in `SocketAddr` (protocol distinction at the socket address level, not the IP address). [breaking-change]
2015-03-13 21:22:33 +00:00
#[stable(feature = "rust1", since = "1.0.0")]
Both,
}
fn hton<I: Int>(i: I) -> I { i.to_be() }
fn ntoh<I: Int>(i: I) -> I { Int::from_be(i) }
std: Stabilize the `net` module This commit performs a stabilization pass over the std::net module, incorporating the changes from RFC 923. Specifically, the following actions were taken: Stable functionality: * `net` (the name) * `Shutdown` * `Shutdown::{Read, Write, Both}` * `lookup_host` * `LookupHost` * `SocketAddr` * `SocketAddr::{V4, V6}` * `SocketAddr::port` * `SocketAddrV4` * `SocketAddrV4::{new, ip, port}` * `SocketAddrV6` * `SocketAddrV4::{new, ip, port, flowinfo, scope_id}` * Common trait impls for socket addr structures * `ToSocketAddrs` * `ToSocketAddrs::Iter` * `ToSocketAddrs::to_socket_addrs` * `ToSocketAddrs for {SocketAddr*, (Ipv*Addr, u16), str, (str, u16)}` * `Ipv4Addr` * `Ipv4Addr::{new, octets, to_ipv6_compatible, to_ipv6_mapped}` * `Ipv6Addr` * `Ipv6Addr::{new, segments, to_ipv4}` * `TcpStream` * `TcpStream::connect` * `TcpStream::{peer_addr, local_addr, shutdown, try_clone}` * `{Read,Write} for {TcpStream, &TcpStream}` * `TcpListener` * `TcpListener::bind` * `TcpListener::{local_addr, try_clone, accept, incoming}` * `Incoming` * `UdpSocket` * `UdpSocket::bind` * `UdpSocket::{recv_from, send_to, local_addr, try_clone}` Unstable functionality: * Extra methods on `Ipv{4,6}Addr` for various methods of inspecting the address and determining qualities of it. * Extra methods on `TcpStream` to configure various protocol options. * Extra methods on `UdpSocket` to configure various protocol options. Deprecated functionality: * The `socket_addr` method has been renamed to `local_addr` This commit is a breaking change due to the restructuring of the `SocketAddr` type as well as the renaming of the `socket_addr` method. Migration should be fairly straightforward, however, after accounting for the new level of abstraction in `SocketAddr` (protocol distinction at the socket address level, not the IP address). [breaking-change]
2015-03-13 21:22:33 +00:00
fn each_addr<A: ToSocketAddrs, F, T>(addr: A, mut f: F) -> io::Result<T>
where F: FnMut(&SocketAddr) -> io::Result<T>
{
let mut last_err = None;
for addr in try!(addr.to_socket_addrs()) {
match f(&addr) {
Ok(l) => return Ok(l),
Err(e) => last_err = Some(e),
}
}
Err(last_err.unwrap_or_else(|| {
Error::new(ErrorKind::InvalidInput,
"could not resolve to any addresses", None)
}))
}
/// An iterator over `SocketAddr` values returned from a host lookup operation.
std: Stabilize the `net` module This commit performs a stabilization pass over the std::net module, incorporating the changes from RFC 923. Specifically, the following actions were taken: Stable functionality: * `net` (the name) * `Shutdown` * `Shutdown::{Read, Write, Both}` * `lookup_host` * `LookupHost` * `SocketAddr` * `SocketAddr::{V4, V6}` * `SocketAddr::port` * `SocketAddrV4` * `SocketAddrV4::{new, ip, port}` * `SocketAddrV6` * `SocketAddrV4::{new, ip, port, flowinfo, scope_id}` * Common trait impls for socket addr structures * `ToSocketAddrs` * `ToSocketAddrs::Iter` * `ToSocketAddrs::to_socket_addrs` * `ToSocketAddrs for {SocketAddr*, (Ipv*Addr, u16), str, (str, u16)}` * `Ipv4Addr` * `Ipv4Addr::{new, octets, to_ipv6_compatible, to_ipv6_mapped}` * `Ipv6Addr` * `Ipv6Addr::{new, segments, to_ipv4}` * `TcpStream` * `TcpStream::connect` * `TcpStream::{peer_addr, local_addr, shutdown, try_clone}` * `{Read,Write} for {TcpStream, &TcpStream}` * `TcpListener` * `TcpListener::bind` * `TcpListener::{local_addr, try_clone, accept, incoming}` * `Incoming` * `UdpSocket` * `UdpSocket::bind` * `UdpSocket::{recv_from, send_to, local_addr, try_clone}` Unstable functionality: * Extra methods on `Ipv{4,6}Addr` for various methods of inspecting the address and determining qualities of it. * Extra methods on `TcpStream` to configure various protocol options. * Extra methods on `UdpSocket` to configure various protocol options. Deprecated functionality: * The `socket_addr` method has been renamed to `local_addr` This commit is a breaking change due to the restructuring of the `SocketAddr` type as well as the renaming of the `socket_addr` method. Migration should be fairly straightforward, however, after accounting for the new level of abstraction in `SocketAddr` (protocol distinction at the socket address level, not the IP address). [breaking-change]
2015-03-13 21:22:33 +00:00
#[stable(feature = "rust1", since = "1.0.0")]
pub struct LookupHost(net_imp::LookupHost);
std: Stabilize the `net` module This commit performs a stabilization pass over the std::net module, incorporating the changes from RFC 923. Specifically, the following actions were taken: Stable functionality: * `net` (the name) * `Shutdown` * `Shutdown::{Read, Write, Both}` * `lookup_host` * `LookupHost` * `SocketAddr` * `SocketAddr::{V4, V6}` * `SocketAddr::port` * `SocketAddrV4` * `SocketAddrV4::{new, ip, port}` * `SocketAddrV6` * `SocketAddrV4::{new, ip, port, flowinfo, scope_id}` * Common trait impls for socket addr structures * `ToSocketAddrs` * `ToSocketAddrs::Iter` * `ToSocketAddrs::to_socket_addrs` * `ToSocketAddrs for {SocketAddr*, (Ipv*Addr, u16), str, (str, u16)}` * `Ipv4Addr` * `Ipv4Addr::{new, octets, to_ipv6_compatible, to_ipv6_mapped}` * `Ipv6Addr` * `Ipv6Addr::{new, segments, to_ipv4}` * `TcpStream` * `TcpStream::connect` * `TcpStream::{peer_addr, local_addr, shutdown, try_clone}` * `{Read,Write} for {TcpStream, &TcpStream}` * `TcpListener` * `TcpListener::bind` * `TcpListener::{local_addr, try_clone, accept, incoming}` * `Incoming` * `UdpSocket` * `UdpSocket::bind` * `UdpSocket::{recv_from, send_to, local_addr, try_clone}` Unstable functionality: * Extra methods on `Ipv{4,6}Addr` for various methods of inspecting the address and determining qualities of it. * Extra methods on `TcpStream` to configure various protocol options. * Extra methods on `UdpSocket` to configure various protocol options. Deprecated functionality: * The `socket_addr` method has been renamed to `local_addr` This commit is a breaking change due to the restructuring of the `SocketAddr` type as well as the renaming of the `socket_addr` method. Migration should be fairly straightforward, however, after accounting for the new level of abstraction in `SocketAddr` (protocol distinction at the socket address level, not the IP address). [breaking-change]
2015-03-13 21:22:33 +00:00
#[stable(feature = "rust1", since = "1.0.0")]
impl Iterator for LookupHost {
type Item = io::Result<SocketAddr>;
fn next(&mut self) -> Option<io::Result<SocketAddr>> { self.0.next() }
}
/// Resolve the host specified by `host` as a number of `SocketAddr` instances.
///
/// This method may perform a DNS query to resolve `host` and may also inspect
/// system configuration to resolve the specified hostname.
///
/// # Examples
///
/// ```no_run
2015-03-13 22:28:35 +00:00
/// # #![feature(net)]
/// use std::net;
///
/// # fn foo() -> std::io::Result<()> {
/// for host in try!(net::lookup_host("rust-lang.org")) {
/// println!("found address: {}", try!(host));
/// }
/// # Ok(())
/// # }
/// ```
std: Stabilize the `net` module This commit performs a stabilization pass over the std::net module, incorporating the changes from RFC 923. Specifically, the following actions were taken: Stable functionality: * `net` (the name) * `Shutdown` * `Shutdown::{Read, Write, Both}` * `lookup_host` * `LookupHost` * `SocketAddr` * `SocketAddr::{V4, V6}` * `SocketAddr::port` * `SocketAddrV4` * `SocketAddrV4::{new, ip, port}` * `SocketAddrV6` * `SocketAddrV4::{new, ip, port, flowinfo, scope_id}` * Common trait impls for socket addr structures * `ToSocketAddrs` * `ToSocketAddrs::Iter` * `ToSocketAddrs::to_socket_addrs` * `ToSocketAddrs for {SocketAddr*, (Ipv*Addr, u16), str, (str, u16)}` * `Ipv4Addr` * `Ipv4Addr::{new, octets, to_ipv6_compatible, to_ipv6_mapped}` * `Ipv6Addr` * `Ipv6Addr::{new, segments, to_ipv4}` * `TcpStream` * `TcpStream::connect` * `TcpStream::{peer_addr, local_addr, shutdown, try_clone}` * `{Read,Write} for {TcpStream, &TcpStream}` * `TcpListener` * `TcpListener::bind` * `TcpListener::{local_addr, try_clone, accept, incoming}` * `Incoming` * `UdpSocket` * `UdpSocket::bind` * `UdpSocket::{recv_from, send_to, local_addr, try_clone}` Unstable functionality: * Extra methods on `Ipv{4,6}Addr` for various methods of inspecting the address and determining qualities of it. * Extra methods on `TcpStream` to configure various protocol options. * Extra methods on `UdpSocket` to configure various protocol options. Deprecated functionality: * The `socket_addr` method has been renamed to `local_addr` This commit is a breaking change due to the restructuring of the `SocketAddr` type as well as the renaming of the `socket_addr` method. Migration should be fairly straightforward, however, after accounting for the new level of abstraction in `SocketAddr` (protocol distinction at the socket address level, not the IP address). [breaking-change]
2015-03-13 21:22:33 +00:00
#[stable(feature = "rust1", since = "1.0.0")]
pub fn lookup_host(host: &str) -> io::Result<LookupHost> {
net_imp::lookup_host(host).map(LookupHost)
}