rust/tests/ui/bit_masks.stderr

error: &-masking with zero
  --> $DIR/bit_masks.rs:23:5
   |
23 |     x & 0 == 0;
   |     ^^^^^^^^^^
   |
   = note: `-D clippy::bad-bit-mask` implied by `-D warnings`

error: this operation will always return zero. This is likely not the intended outcome
  --> $DIR/bit_masks.rs:23:5
   |
23 |     x & 0 == 0;
   |     ^^^^^
   |
   = note: #[deny(clippy::erasing_op)] on by default

error: incompatible bit mask: `_ & 2` can never be equal to `1`
  --> $DIR/bit_masks.rs:26:5
   |
26 |     x & 2 == 1;
   |     ^^^^^^^^^^

error: incompatible bit mask: `_ | 3` can never be equal to `2`
  --> $DIR/bit_masks.rs:30:5
   |
30 |     x | 3 == 2;
   |     ^^^^^^^^^^

error: incompatible bit mask: `_ & 1` will never be higher than `1`
  --> $DIR/bit_masks.rs:32:5
   |
32 |     x & 1 > 1;
   |     ^^^^^^^^^

error: incompatible bit mask: `_ | 2` will always be higher than `1`
  --> $DIR/bit_masks.rs:36:5
   |
36 |     x | 2 > 1;
   |     ^^^^^^^^^

error: incompatible bit mask: `_ & 7` can never be equal to `8`
  --> $DIR/bit_masks.rs:43:5
   |
43 |     x & THREE_BITS == 8;
   |     ^^^^^^^^^^^^^^^^^^^

error: incompatible bit mask: `_ | 7` will never be lower than `7`
  --> $DIR/bit_masks.rs:44:5
   |
44 |     x | EVEN_MORE_REDIRECTION < 7;
   |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

error: &-masking with zero
  --> $DIR/bit_masks.rs:46:5
   |
46 |     0 & x == 0;
   |     ^^^^^^^^^^

error: this operation will always return zero. This is likely not the intended outcome
  --> $DIR/bit_masks.rs:46:5
   |
46 |     0 & x == 0;
   |     ^^^^^

error: incompatible bit mask: `_ | 2` will always be higher than `1`
  --> $DIR/bit_masks.rs:50:5
   |
50 |     1 < 2 | x;
   |     ^^^^^^^^^

error: incompatible bit mask: `_ | 3` can never be equal to `2`
  --> $DIR/bit_masks.rs:51:5
   |
51 |     2 == 3 | x;
   |     ^^^^^^^^^^

error: incompatible bit mask: `_ & 2` can never be equal to `1`
  --> $DIR/bit_masks.rs:52:5
   |
52 |     1 == x & 2;
   |     ^^^^^^^^^^

error: ineffective bit mask: `x | 1` compared to `3`, is the same as x compared directly
  --> $DIR/bit_masks.rs:63:5
   |
63 |     x | 1 > 3;
   |     ^^^^^^^^^
   |
   = note: `-D clippy::ineffective-bit-mask` implied by `-D warnings`

error: ineffective bit mask: `x | 1` compared to `4`, is the same as x compared directly
  --> $DIR/bit_masks.rs:64:5
   |
64 |     x | 1 < 4;
   |     ^^^^^^^^^

error: ineffective bit mask: `x | 1` compared to `3`, is the same as x compared directly
  --> $DIR/bit_masks.rs:65:5
   |
65 |     x | 1 <= 3;
   |     ^^^^^^^^^^

error: ineffective bit mask: `x | 1` compared to `8`, is the same as x compared directly
  --> $DIR/bit_masks.rs:66:5
   |
66 |     x | 1 >= 8;
   |     ^^^^^^^^^^

error: aborting due to 17 previous errors
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`error: &-masking with zero`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:23:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`23 \| x & 0 == 0;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^^`
			`\|`
Adapt the *.stderr files of the ui-tests to the tool_lints 2018-08-01 14:30:44 +00:00			= note: `-D clippy::bad-bit-mask` implied by `-D warnings`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00
Clarify message for erasing_op lint 2017-10-15 07:32:47 +00:00			`error: this operation will always return zero. This is likely not the intended outcome`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:23:5`
Add erasing_op lint For expressions that can be replaced by a zero. 2017-09-30 17:14:00 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`23 \| x & 0 == 0;`
Add erasing_op lint For expressions that can be replaced by a zero. 2017-09-30 17:14:00 +00:00			`\| ^^^^^`
			`\|`
Adapt the *.stderr files of the ui-tests to the tool_lints 2018-08-01 14:30:44 +00:00			`= note: #[deny(clippy::erasing_op)] on by default`
Add erasing_op lint For expressions that can be replaced by a zero. 2017-09-30 17:14:00 +00:00
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			error: incompatible bit mask: `_ & 2` can never be equal to `1`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:26:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`26 \| x & 2 == 1;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^^`

			error: incompatible bit mask: `_ \| 3` can never be equal to `2`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:30:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`30 \| x \| 3 == 2;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^^`

			error: incompatible bit mask: `_ & 1` will never be higher than `1`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:32:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`32 \| x & 1 > 1;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^`

			error: incompatible bit mask: `_ \| 2` will always be higher than `1`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:36:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`36 \| x \| 2 > 1;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^`

			error: incompatible bit mask: `_ & 7` can never be equal to `8`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:43:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`43 \| x & THREE_BITS == 8;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^^^^^^^^^^^`

			error: incompatible bit mask: `_ \| 7` will never be lower than `7`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:44:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`44 \| x \| EVEN_MORE_REDIRECTION < 7;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^`

			`error: &-masking with zero`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:46:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`46 \| 0 & x == 0;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^^`

Clarify message for erasing_op lint 2017-10-15 07:32:47 +00:00			`error: this operation will always return zero. This is likely not the intended outcome`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:46:5`
Add erasing_op lint For expressions that can be replaced by a zero. 2017-09-30 17:14:00 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`46 \| 0 & x == 0;`
Add erasing_op lint For expressions that can be replaced by a zero. 2017-09-30 17:14:00 +00:00			`\| ^^^^^`

rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			error: incompatible bit mask: `_ \| 2` will always be higher than `1`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:50:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`50 \| 1 < 2 \| x;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^`

			error: incompatible bit mask: `_ \| 3` can never be equal to `2`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:51:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`51 \| 2 == 3 \| x;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^^`

			error: incompatible bit mask: `_ & 2` can never be equal to `1`
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:52:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`52 \| 1 == x & 2;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^^`

			error: ineffective bit mask: `x \| 1` compared to `3`, is the same as x compared directly
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:63:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`63 \| x \| 1 > 3;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^`
			`\|`
Adapt the *.stderr files of the ui-tests to the tool_lints 2018-08-01 14:30:44 +00:00			= note: `-D clippy::ineffective-bit-mask` implied by `-D warnings`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00
			error: ineffective bit mask: `x \| 1` compared to `4`, is the same as x compared directly
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:64:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`64 \| x \| 1 < 4;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^`

			error: ineffective bit mask: `x \| 1` compared to `3`, is the same as x compared directly
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:65:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`65 \| x \| 1 <= 3;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^^`

			error: ineffective bit mask: `x \| 1` compared to `8`, is the same as x compared directly
update test stderr 2018-12-10 05:27:19 +00:00			`--> $DIR/bit_masks.rs:66:5`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\|`
update test stderr 2018-12-10 05:27:19 +00:00			`66 \| x \| 1 >= 8;`
rustup and compile-fail -> ui test move 2017-02-07 20:05:30 +00:00			`\| ^^^^^^^^^^`

Update changed ui tests 2018-01-16 16:06:27 +00:00			`error: aborting due to 17 previous errors`