rust/src/rustllvm/RustWrapper.cpp

1579 lines
56 KiB
C++
Raw Normal View History

#include "rustllvm.h"
#include "llvm/IR/CallSite.h"
2017-03-16 20:10:04 +00:00
#include "llvm/IR/DebugInfoMetadata.h"
#include "llvm/IR/DiagnosticInfo.h"
#include "llvm/IR/DiagnosticPrinter.h"
#include "llvm/IR/GlobalVariable.h"
#include "llvm/IR/Instructions.h"
#include "llvm/Object/Archive.h"
#include "llvm/Object/ObjectFile.h"
rustc: Enable LTO and multiple codegen units This commit is a refactoring of the LTO backend in Rust to support compilations with multiple codegen units. The immediate result of this PR is to remove the artificial error emitted by rustc about `-C lto -C codegen-units-8`, but longer term this is intended to lay the groundwork for LTO with incremental compilation and ultimately be the underpinning of ThinLTO support. The problem here that needed solving is that when rustc is producing multiple codegen units in one compilation LTO needs to merge them all together. Previously only upstream dependencies were merged and it was inherently relied on that there was only one local codegen unit. Supporting this involved refactoring the optimization backend architecture for rustc, namely splitting the `optimize_and_codegen` function into `optimize` and `codegen`. After an LLVM module has been optimized it may be blocked and queued up for LTO, and only after LTO are modules code generated. Non-LTO compilations should look the same as they do today backend-wise, we'll spin up a thread for each codegen unit and optimize/codegen in that thread. LTO compilations will, however, send the LLVM module back to the coordinator thread once optimizations have finished. When all LLVM modules have finished optimizing the coordinator will invoke the LTO backend, producing a further list of LLVM modules. Currently this is always a list of one LLVM module. The coordinator then spawns further work to run LTO and code generation passes over each module. In the course of this refactoring a number of other pieces were refactored: * Management of the bytecode encoding in rlibs was centralized into one module instead of being scattered across LTO and linking. * Some internal refactorings on the link stage of the compiler was done to work directly from `CompiledModule` structures instead of lists of paths. * The trans time-graph output was tweaked a little to include a name on each bar and inflate the size of the bars a little
2017-07-23 15:14:38 +00:00
#include "llvm/Bitcode/BitcodeWriterPass.h"
#include "llvm/Support/Signals.h"
#include "llvm/ADT/Optional.h"
#include <iostream>
//===----------------------------------------------------------------------===
//
// This file defines alternate interfaces to core functions that are more
// readily callable by Rust's FFI.
//
//===----------------------------------------------------------------------===
using namespace llvm;
using namespace llvm::sys;
rustc: Optimize reading metadata by 4x We were previously reading metadata via `ar p`, but as learned from rustdoc awhile back, spawning a process to do something is pretty slow. Turns out LLVM has an Archive class to read archives, but it cannot write archives. This commits adds bindings to the read-only version of the LLVM archive class (with a new type that only has a read() method), and then it uses this class when reading the metadata out of rlibs. When you put this in tandem of not compressing the metadata, reading the metadata is 4x faster than it used to be The timings I got for reading metadata from the respective libraries was: libstd-04ff901e-0.9-pre.dylib => 100ms libstd-04ff901e-0.9-pre.rlib => 23ms librustuv-7945354c-0.9-pre.dylib => 4ms librustuv-7945354c-0.9-pre.rlib => 1ms librustc-5b94a16f-0.9-pre.dylib => 87ms librustc-5b94a16f-0.9-pre.rlib => 35ms libextra-a6ebb16f-0.9-pre.dylib => 63ms libextra-a6ebb16f-0.9-pre.rlib => 15ms libsyntax-2e4c0458-0.9-pre.dylib => 86ms libsyntax-2e4c0458-0.9-pre.rlib => 22ms In order to always take advantage of these faster metadata read-times, I sort the files in filesearch based on whether they have an rlib extension or not (prefer all rlib files first). Overall, this halved the compile time for a `fn main() {}` crate from 0.185s to 0.095s on my system (when preferring dynamic linking). Reading metadata is still the slowest pass of the compiler at 0.035s, but it's getting pretty close to linking at 0.021s! The next best optimization is to just not copy the metadata from LLVM because that's the most expensive part of reading metadata right now.
2013-12-17 04:58:21 +00:00
using namespace llvm::object;
// LLVMAtomicOrdering is already an enum - don't create another
// one.
static AtomicOrdering fromRust(LLVMAtomicOrdering Ordering) {
switch (Ordering) {
case LLVMAtomicOrderingNotAtomic:
return AtomicOrdering::NotAtomic;
case LLVMAtomicOrderingUnordered:
return AtomicOrdering::Unordered;
case LLVMAtomicOrderingMonotonic:
return AtomicOrdering::Monotonic;
case LLVMAtomicOrderingAcquire:
return AtomicOrdering::Acquire;
case LLVMAtomicOrderingRelease:
return AtomicOrdering::Release;
case LLVMAtomicOrderingAcquireRelease:
return AtomicOrdering::AcquireRelease;
case LLVMAtomicOrderingSequentiallyConsistent:
return AtomicOrdering::SequentiallyConsistent;
}
report_fatal_error("Invalid LLVMAtomicOrdering value!");
}
static LLVM_THREAD_LOCAL char *LastError;
// Custom error handler for fatal LLVM errors.
//
// Notably it exits the process with code 101, unlike LLVM's default of 1.
static void FatalErrorHandler(void *UserData,
const std::string& Reason,
bool GenCrashDiag) {
// Do the same thing that the default error handler does.
std::cerr << "LLVM ERROR: " << Reason << std::endl;
// Since this error handler exits the process, we have to run any cleanup that
// LLVM would run after handling the error. This might change with an LLVM
// upgrade.
sys::RunInterruptHandlers();
exit(101);
}
extern "C" void LLVMRustInstallFatalErrorHandler() {
install_fatal_error_handler(FatalErrorHandler);
}
extern "C" LLVMMemoryBufferRef
LLVMRustCreateMemoryBufferWithContentsOfFile(const char *Path) {
ErrorOr<std::unique_ptr<MemoryBuffer>> BufOr =
MemoryBuffer::getFile(Path, -1, false);
if (!BufOr) {
LLVMRustSetLastError(BufOr.getError().message().c_str());
return nullptr;
}
return wrap(BufOr.get().release());
}
extern "C" char *LLVMRustGetLastError(void) {
char *Ret = LastError;
LastError = nullptr;
return Ret;
}
extern "C" unsigned int LLVMRustGetInstructionCount(LLVMModuleRef M) {
return unwrap(M)->getInstructionCount();
}
extern "C" void LLVMRustSetLastError(const char *Err) {
free((void *)LastError);
LastError = strdup(Err);
}
extern "C" LLVMContextRef LLVMRustContextCreate(bool shouldDiscardNames) {
auto ctx = new LLVMContext();
ctx->setDiscardValueNames(shouldDiscardNames);
return wrap(ctx);
}
extern "C" void LLVMRustSetNormalizedTarget(LLVMModuleRef M,
const char *Triple) {
unwrap(M)->setTargetTriple(Triple::normalize(Triple));
}
2011-05-10 23:10:08 +00:00
extern "C" void LLVMRustPrintPassTimings() {
raw_fd_ostream OS(2, false); // stderr.
2011-05-10 23:10:08 +00:00
TimerGroup::printAll(OS);
}
extern "C" LLVMValueRef LLVMRustGetNamedValue(LLVMModuleRef M,
const char *Name) {
return wrap(unwrap(M)->getNamedValue(Name));
2015-02-27 11:37:33 +00:00
}
extern "C" LLVMValueRef LLVMRustGetOrInsertFunction(LLVMModuleRef M,
const char *Name,
LLVMTypeRef FunctionTy) {
return wrap(
unwrap(M)->getOrInsertFunction(Name, unwrap<FunctionType>(FunctionTy))
#if LLVM_VERSION_GE(9, 0)
.getCallee()
#endif
);
}
extern "C" LLVMValueRef
LLVMRustGetOrInsertGlobal(LLVMModuleRef M, const char *Name, size_t NameLen, LLVMTypeRef Ty) {
StringRef NameRef(Name, NameLen);
return wrap(unwrap(M)->getOrInsertGlobal(NameRef, unwrap(Ty)));
}
extern "C" LLVMValueRef
LLVMRustInsertPrivateGlobal(LLVMModuleRef M, LLVMTypeRef Ty) {
return wrap(new GlobalVariable(*unwrap(M),
unwrap(Ty),
false,
GlobalValue::PrivateLinkage,
nullptr));
}
extern "C" LLVMTypeRef LLVMRustMetadataTypeInContext(LLVMContextRef C) {
return wrap(Type::getMetadataTy(*unwrap(C)));
}
static Attribute::AttrKind fromRust(LLVMRustAttribute Kind) {
switch (Kind) {
case AlwaysInline:
return Attribute::AlwaysInline;
case ByVal:
return Attribute::ByVal;
case Cold:
return Attribute::Cold;
case InlineHint:
return Attribute::InlineHint;
case MinSize:
return Attribute::MinSize;
case Naked:
return Attribute::Naked;
case NoAlias:
return Attribute::NoAlias;
case NoCapture:
return Attribute::NoCapture;
case NoInline:
return Attribute::NoInline;
case NonNull:
return Attribute::NonNull;
case NoRedZone:
return Attribute::NoRedZone;
case NoReturn:
return Attribute::NoReturn;
case NoUnwind:
return Attribute::NoUnwind;
case OptimizeForSize:
return Attribute::OptimizeForSize;
case ReadOnly:
return Attribute::ReadOnly;
case SExt:
return Attribute::SExt;
case StructRet:
return Attribute::StructRet;
case UWTable:
return Attribute::UWTable;
case ZExt:
return Attribute::ZExt;
case InReg:
return Attribute::InReg;
2016-12-30 04:28:11 +00:00
case SanitizeThread:
return Attribute::SanitizeThread;
case SanitizeAddress:
return Attribute::SanitizeAddress;
case SanitizeMemory:
return Attribute::SanitizeMemory;
case NonLazyBind:
return Attribute::NonLazyBind;
case OptimizeNone:
return Attribute::OptimizeNone;
2019-02-09 14:55:30 +00:00
case ReturnsTwice:
return Attribute::ReturnsTwice;
}
report_fatal_error("bad AttributeKind");
}
extern "C" void LLVMRustAddCallSiteAttribute(LLVMValueRef Instr, unsigned Index,
LLVMRustAttribute RustAttr) {
CallSite Call = CallSite(unwrap<Instruction>(Instr));
Attribute Attr = Attribute::get(Call->getContext(), fromRust(RustAttr));
2017-07-21 16:15:03 +00:00
Call.addAttribute(Index, Attr);
}
extern "C" void LLVMRustAddAlignmentCallSiteAttr(LLVMValueRef Instr,
unsigned Index,
uint32_t Bytes) {
CallSite Call = CallSite(unwrap<Instruction>(Instr));
AttrBuilder B;
B.addAlignmentAttr(Bytes);
Call.setAttributes(Call.getAttributes().addAttributes(
Call->getContext(), Index, B));
}
extern "C" void LLVMRustAddDereferenceableCallSiteAttr(LLVMValueRef Instr,
unsigned Index,
uint64_t Bytes) {
CallSite Call = CallSite(unwrap<Instruction>(Instr));
AttrBuilder B;
B.addDereferenceableAttr(Bytes);
2017-07-21 16:15:03 +00:00
Call.setAttributes(Call.getAttributes().addAttributes(
Call->getContext(), Index, B));
}
extern "C" void LLVMRustAddDereferenceableOrNullCallSiteAttr(LLVMValueRef Instr,
unsigned Index,
uint64_t Bytes) {
CallSite Call = CallSite(unwrap<Instruction>(Instr));
AttrBuilder B;
B.addDereferenceableOrNullAttr(Bytes);
Call.setAttributes(Call.getAttributes().addAttributes(
Call->getContext(), Index, B));
}
2019-07-06 19:52:25 +00:00
extern "C" void LLVMRustAddByValCallSiteAttr(LLVMValueRef Instr, unsigned Index,
LLVMTypeRef Ty) {
CallSite Call = CallSite(unwrap<Instruction>(Instr));
#if LLVM_VERSION_GE(9, 0)
Attribute Attr = Attribute::getWithByValType(Call->getContext(), unwrap(Ty));
#else
Attribute Attr = Attribute::get(Call->getContext(), Attribute::ByVal);
#endif
Call.addAttribute(Index, Attr);
}
extern "C" void LLVMRustAddFunctionAttribute(LLVMValueRef Fn, unsigned Index,
LLVMRustAttribute RustAttr) {
Function *A = unwrap<Function>(Fn);
Attribute Attr = Attribute::get(A->getContext(), fromRust(RustAttr));
AttrBuilder B(Attr);
2017-07-21 16:15:03 +00:00
A->addAttributes(Index, B);
}
extern "C" void LLVMRustAddAlignmentAttr(LLVMValueRef Fn,
unsigned Index,
uint32_t Bytes) {
Function *A = unwrap<Function>(Fn);
AttrBuilder B;
B.addAlignmentAttr(Bytes);
A->addAttributes(Index, B);
}
extern "C" void LLVMRustAddDereferenceableAttr(LLVMValueRef Fn, unsigned Index,
uint64_t Bytes) {
Function *A = unwrap<Function>(Fn);
AttrBuilder B;
B.addDereferenceableAttr(Bytes);
2017-07-21 16:15:03 +00:00
A->addAttributes(Index, B);
}
extern "C" void LLVMRustAddDereferenceableOrNullAttr(LLVMValueRef Fn,
unsigned Index,
uint64_t Bytes) {
Function *A = unwrap<Function>(Fn);
AttrBuilder B;
B.addDereferenceableOrNullAttr(Bytes);
A->addAttributes(Index, B);
}
2019-07-06 19:52:25 +00:00
extern "C" void LLVMRustAddByValAttr(LLVMValueRef Fn, unsigned Index,
LLVMTypeRef Ty) {
Function *F = unwrap<Function>(Fn);
#if LLVM_VERSION_GE(9, 0)
Attribute Attr = Attribute::getWithByValType(F->getContext(), unwrap(Ty));
#else
Attribute Attr = Attribute::get(F->getContext(), Attribute::ByVal);
#endif
F->addAttribute(Index, Attr);
}
extern "C" void LLVMRustAddFunctionAttrStringValue(LLVMValueRef Fn,
unsigned Index,
const char *Name,
const char *Value) {
Function *F = unwrap<Function>(Fn);
AttrBuilder B;
B.addAttribute(Name, Value);
2017-07-21 16:15:03 +00:00
F->addAttributes(Index, B);
}
extern "C" void LLVMRustRemoveFunctionAttributes(LLVMValueRef Fn,
unsigned Index,
LLVMRustAttribute RustAttr) {
Function *F = unwrap<Function>(Fn);
Attribute Attr = Attribute::get(F->getContext(), fromRust(RustAttr));
AttrBuilder B(Attr);
2017-07-21 16:15:03 +00:00
auto PAL = F->getAttributes();
auto PALNew = PAL.removeAttributes(F->getContext(), Index, B);
F->setAttributes(PALNew);
}
// enable fpmath flag UnsafeAlgebra
extern "C" void LLVMRustSetHasUnsafeAlgebra(LLVMValueRef V) {
if (auto I = dyn_cast<Instruction>(unwrap<Value>(V))) {
I->setFast(true);
}
}
extern "C" LLVMValueRef
LLVMRustBuildAtomicLoad(LLVMBuilderRef B, LLVMValueRef Source, const char *Name,
LLVMAtomicOrdering Order) {
LoadInst *LI = new LoadInst(unwrap(Source));
LI->setAtomic(fromRust(Order));
return wrap(unwrap(B)->Insert(LI, Name));
}
extern "C" LLVMValueRef LLVMRustBuildAtomicStore(LLVMBuilderRef B,
LLVMValueRef V,
LLVMValueRef Target,
LLVMAtomicOrdering Order) {
StoreInst *SI = new StoreInst(unwrap(V), unwrap(Target));
SI->setAtomic(fromRust(Order));
return wrap(unwrap(B)->Insert(SI));
}
extern "C" LLVMValueRef
LLVMRustBuildAtomicCmpXchg(LLVMBuilderRef B, LLVMValueRef Target,
LLVMValueRef Old, LLVMValueRef Source,
LLVMAtomicOrdering Order,
LLVMAtomicOrdering FailureOrder, LLVMBool Weak) {
AtomicCmpXchgInst *ACXI = unwrap(B)->CreateAtomicCmpXchg(
unwrap(Target), unwrap(Old), unwrap(Source), fromRust(Order),
fromRust(FailureOrder));
ACXI->setWeak(Weak);
return wrap(ACXI);
}
enum class LLVMRustSynchronizationScope {
Other,
SingleThread,
CrossThread,
};
2017-07-21 12:02:52 +00:00
static SyncScope::ID fromRust(LLVMRustSynchronizationScope Scope) {
switch (Scope) {
case LLVMRustSynchronizationScope::SingleThread:
return SyncScope::SingleThread;
case LLVMRustSynchronizationScope::CrossThread:
return SyncScope::System;
default:
report_fatal_error("bad SynchronizationScope.");
2017-07-21 12:02:52 +00:00
}
}
extern "C" LLVMValueRef
LLVMRustBuildAtomicFence(LLVMBuilderRef B, LLVMAtomicOrdering Order,
LLVMRustSynchronizationScope Scope) {
return wrap(unwrap(B)->CreateFence(fromRust(Order), fromRust(Scope)));
2013-07-28 07:48:16 +00:00
}
2016-08-02 21:25:19 +00:00
enum class LLVMRustAsmDialect {
Other,
Att,
Intel,
2016-08-02 21:25:19 +00:00
};
static InlineAsm::AsmDialect fromRust(LLVMRustAsmDialect Dialect) {
switch (Dialect) {
case LLVMRustAsmDialect::Att:
return InlineAsm::AD_ATT;
case LLVMRustAsmDialect::Intel:
return InlineAsm::AD_Intel;
default:
report_fatal_error("bad AsmDialect.");
}
2016-08-02 21:25:19 +00:00
}
extern "C" LLVMValueRef LLVMRustInlineAsm(LLVMTypeRef Ty, char *AsmString,
char *Constraints,
LLVMBool HasSideEffects,
LLVMBool IsAlignStack,
LLVMRustAsmDialect Dialect) {
return wrap(InlineAsm::get(unwrap<FunctionType>(Ty), AsmString, Constraints,
HasSideEffects, IsAlignStack, fromRust(Dialect)));
2013-03-10 06:37:50 +00:00
}
extern "C" bool LLVMRustInlineAsmVerify(LLVMTypeRef Ty,
char *Constraints) {
return InlineAsm::Verify(unwrap<FunctionType>(Ty), Constraints);
}
2017-03-22 00:50:23 +00:00
extern "C" void LLVMRustAppendModuleInlineAsm(LLVMModuleRef M, const char *Asm) {
unwrap(M)->appendModuleInlineAsm(StringRef(Asm));
}
typedef DIBuilder *LLVMRustDIBuilderRef;
2013-06-14 18:38:29 +00:00
2017-07-21 11:15:36 +00:00
template <typename DIT> DIT *unwrapDIPtr(LLVMMetadataRef Ref) {
return (DIT *)(Ref ? unwrap<MDNode>(Ref) : nullptr);
}
#define DIDescriptor DIScope
#define DIArray DINodeArray
#define unwrapDI unwrapDIPtr
2013-06-14 18:38:29 +00:00
// These values **must** match debuginfo::DIFlags! They also *happen*
// to match LLVM, but that isn't required as we do giant sets of
// matching below. The value shouldn't be directly passed to LLVM.
enum class LLVMRustDIFlags : uint32_t {
FlagZero = 0,
FlagPrivate = 1,
FlagProtected = 2,
FlagPublic = 3,
FlagFwdDecl = (1 << 2),
FlagAppleBlock = (1 << 3),
FlagBlockByrefStruct = (1 << 4),
FlagVirtual = (1 << 5),
FlagArtificial = (1 << 6),
FlagExplicit = (1 << 7),
FlagPrototyped = (1 << 8),
FlagObjcClassComplete = (1 << 9),
FlagObjectPointer = (1 << 10),
FlagVector = (1 << 11),
FlagStaticMember = (1 << 12),
FlagLValueReference = (1 << 13),
FlagRValueReference = (1 << 14),
FlagExternalTypeRef = (1 << 15),
FlagIntroducedVirtual = (1 << 18),
FlagBitField = (1 << 19),
FlagNoReturn = (1 << 20),
// Do not add values that are not supported by the minimum LLVM
// version we support! see llvm/include/llvm/IR/DebugInfoFlags.def
};
inline LLVMRustDIFlags operator&(LLVMRustDIFlags A, LLVMRustDIFlags B) {
return static_cast<LLVMRustDIFlags>(static_cast<uint32_t>(A) &
static_cast<uint32_t>(B));
}
inline LLVMRustDIFlags operator|(LLVMRustDIFlags A, LLVMRustDIFlags B) {
return static_cast<LLVMRustDIFlags>(static_cast<uint32_t>(A) |
static_cast<uint32_t>(B));
}
inline LLVMRustDIFlags &operator|=(LLVMRustDIFlags &A, LLVMRustDIFlags B) {
return A = A | B;
}
inline bool isSet(LLVMRustDIFlags F) { return F != LLVMRustDIFlags::FlagZero; }
inline LLVMRustDIFlags visibility(LLVMRustDIFlags F) {
return static_cast<LLVMRustDIFlags>(static_cast<uint32_t>(F) & 0x3);
}
static DINode::DIFlags fromRust(LLVMRustDIFlags Flags) {
DINode::DIFlags Result = DINode::DIFlags::FlagZero;
switch (visibility(Flags)) {
case LLVMRustDIFlags::FlagPrivate:
Result |= DINode::DIFlags::FlagPrivate;
break;
case LLVMRustDIFlags::FlagProtected:
Result |= DINode::DIFlags::FlagProtected;
break;
case LLVMRustDIFlags::FlagPublic:
Result |= DINode::DIFlags::FlagPublic;
break;
default:
// The rest are handled below
break;
}
if (isSet(Flags & LLVMRustDIFlags::FlagFwdDecl)) {
Result |= DINode::DIFlags::FlagFwdDecl;
}
if (isSet(Flags & LLVMRustDIFlags::FlagAppleBlock)) {
Result |= DINode::DIFlags::FlagAppleBlock;
}
#if LLVM_VERSION_LT(10, 0)
if (isSet(Flags & LLVMRustDIFlags::FlagBlockByrefStruct)) {
Result |= DINode::DIFlags::FlagBlockByrefStruct;
}
#endif
if (isSet(Flags & LLVMRustDIFlags::FlagVirtual)) {
Result |= DINode::DIFlags::FlagVirtual;
}
if (isSet(Flags & LLVMRustDIFlags::FlagArtificial)) {
Result |= DINode::DIFlags::FlagArtificial;
}
if (isSet(Flags & LLVMRustDIFlags::FlagExplicit)) {
Result |= DINode::DIFlags::FlagExplicit;
}
if (isSet(Flags & LLVMRustDIFlags::FlagPrototyped)) {
Result |= DINode::DIFlags::FlagPrototyped;
}
if (isSet(Flags & LLVMRustDIFlags::FlagObjcClassComplete)) {
Result |= DINode::DIFlags::FlagObjcClassComplete;
}
if (isSet(Flags & LLVMRustDIFlags::FlagObjectPointer)) {
Result |= DINode::DIFlags::FlagObjectPointer;
}
if (isSet(Flags & LLVMRustDIFlags::FlagVector)) {
Result |= DINode::DIFlags::FlagVector;
}
if (isSet(Flags & LLVMRustDIFlags::FlagStaticMember)) {
Result |= DINode::DIFlags::FlagStaticMember;
}
if (isSet(Flags & LLVMRustDIFlags::FlagLValueReference)) {
Result |= DINode::DIFlags::FlagLValueReference;
}
if (isSet(Flags & LLVMRustDIFlags::FlagRValueReference)) {
Result |= DINode::DIFlags::FlagRValueReference;
}
if (isSet(Flags & LLVMRustDIFlags::FlagIntroducedVirtual)) {
Result |= DINode::DIFlags::FlagIntroducedVirtual;
}
if (isSet(Flags & LLVMRustDIFlags::FlagBitField)) {
Result |= DINode::DIFlags::FlagBitField;
}
if (isSet(Flags & LLVMRustDIFlags::FlagNoReturn)) {
Result |= DINode::DIFlags::FlagNoReturn;
}
return Result;
}
// These values **must** match debuginfo::DISPFlags! They also *happen*
// to match LLVM, but that isn't required as we do giant sets of
// matching below. The value shouldn't be directly passed to LLVM.
enum class LLVMRustDISPFlags : uint32_t {
SPFlagZero = 0,
SPFlagVirtual = 1,
SPFlagPureVirtual = 2,
SPFlagLocalToUnit = (1 << 2),
SPFlagDefinition = (1 << 3),
SPFlagOptimized = (1 << 4),
SPFlagMainSubprogram = (1 << 5),
// Do not add values that are not supported by the minimum LLVM
// version we support! see llvm/include/llvm/IR/DebugInfoFlags.def
// (In LLVM < 8, createFunction supported these as separate bool arguments.)
};
inline LLVMRustDISPFlags operator&(LLVMRustDISPFlags A, LLVMRustDISPFlags B) {
return static_cast<LLVMRustDISPFlags>(static_cast<uint32_t>(A) &
static_cast<uint32_t>(B));
}
inline LLVMRustDISPFlags operator|(LLVMRustDISPFlags A, LLVMRustDISPFlags B) {
return static_cast<LLVMRustDISPFlags>(static_cast<uint32_t>(A) |
static_cast<uint32_t>(B));
}
inline LLVMRustDISPFlags &operator|=(LLVMRustDISPFlags &A, LLVMRustDISPFlags B) {
return A = A | B;
}
inline bool isSet(LLVMRustDISPFlags F) { return F != LLVMRustDISPFlags::SPFlagZero; }
inline LLVMRustDISPFlags virtuality(LLVMRustDISPFlags F) {
return static_cast<LLVMRustDISPFlags>(static_cast<uint32_t>(F) & 0x3);
}
#if LLVM_VERSION_GE(8, 0)
static DISubprogram::DISPFlags fromRust(LLVMRustDISPFlags SPFlags) {
DISubprogram::DISPFlags Result = DISubprogram::DISPFlags::SPFlagZero;
switch (virtuality(SPFlags)) {
case LLVMRustDISPFlags::SPFlagVirtual:
Result |= DISubprogram::DISPFlags::SPFlagVirtual;
break;
case LLVMRustDISPFlags::SPFlagPureVirtual:
Result |= DISubprogram::DISPFlags::SPFlagPureVirtual;
break;
default:
// The rest are handled below
break;
}
if (isSet(SPFlags & LLVMRustDISPFlags::SPFlagLocalToUnit)) {
Result |= DISubprogram::DISPFlags::SPFlagLocalToUnit;
}
if (isSet(SPFlags & LLVMRustDISPFlags::SPFlagDefinition)) {
Result |= DISubprogram::DISPFlags::SPFlagDefinition;
}
if (isSet(SPFlags & LLVMRustDISPFlags::SPFlagOptimized)) {
Result |= DISubprogram::DISPFlags::SPFlagOptimized;
}
#if LLVM_VERSION_GE(9, 0)
if (isSet(SPFlags & LLVMRustDISPFlags::SPFlagMainSubprogram)) {
Result |= DISubprogram::DISPFlags::SPFlagMainSubprogram;
}
#endif
return Result;
}
#endif
2019-01-22 21:01:14 +00:00
enum class LLVMRustDebugEmissionKind {
NoDebug,
FullDebug,
LineTablesOnly,
};
static DICompileUnit::DebugEmissionKind fromRust(LLVMRustDebugEmissionKind Kind) {
switch (Kind) {
case LLVMRustDebugEmissionKind::NoDebug:
return DICompileUnit::DebugEmissionKind::NoDebug;
case LLVMRustDebugEmissionKind::FullDebug:
return DICompileUnit::DebugEmissionKind::FullDebug;
case LLVMRustDebugEmissionKind::LineTablesOnly:
return DICompileUnit::DebugEmissionKind::LineTablesOnly;
default:
report_fatal_error("bad DebugEmissionKind.");
}
}
2015-05-30 13:50:12 +00:00
extern "C" uint32_t LLVMRustDebugMetadataVersion() {
return DEBUG_METADATA_VERSION;
}
extern "C" uint32_t LLVMRustVersionMinor() { return LLVM_VERSION_MINOR; }
extern "C" uint32_t LLVMRustVersionMajor() { return LLVM_VERSION_MAJOR; }
extern "C" void LLVMRustAddModuleFlag(LLVMModuleRef M, const char *Name,
uint32_t Value) {
unwrap(M)->addModuleFlag(Module::Warning, Name, Value);
}
extern "C" LLVMValueRef LLVMRustMetadataAsValue(LLVMContextRef C, LLVMMetadataRef MD) {
return wrap(MetadataAsValue::get(*unwrap(C), unwrap(MD)));
}
extern "C" LLVMRustDIBuilderRef LLVMRustDIBuilderCreate(LLVMModuleRef M) {
return new DIBuilder(*unwrap(M));
2013-06-14 18:38:29 +00:00
}
extern "C" void LLVMRustDIBuilderDispose(LLVMRustDIBuilderRef Builder) {
delete Builder;
2013-06-14 18:38:29 +00:00
}
extern "C" void LLVMRustDIBuilderFinalize(LLVMRustDIBuilderRef Builder) {
Builder->finalize();
2013-06-14 18:38:29 +00:00
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateCompileUnit(
LLVMRustDIBuilderRef Builder, unsigned Lang, LLVMMetadataRef FileRef,
2017-02-11 21:01:25 +00:00
const char *Producer, bool isOptimized, const char *Flags,
2019-01-22 21:01:14 +00:00
unsigned RuntimeVer, const char *SplitName,
LLVMRustDebugEmissionKind Kind) {
2017-02-11 21:01:25 +00:00
auto *File = unwrapDI<DIFile>(FileRef);
return wrap(Builder->createCompileUnit(Lang, File, Producer, isOptimized,
2019-01-22 21:01:14 +00:00
Flags, RuntimeVer, SplitName,
fromRust(Kind)));
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef
LLVMRustDIBuilderCreateFile(LLVMRustDIBuilderRef Builder, const char *Filename,
const char *Directory) {
return wrap(Builder->createFile(Filename, Directory));
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef
LLVMRustDIBuilderCreateSubroutineType(LLVMRustDIBuilderRef Builder,
2017-07-21 11:15:36 +00:00
LLVMMetadataRef File,
LLVMMetadataRef ParameterTypes) {
return wrap(Builder->createSubroutineType(
DITypeRefArray(unwrap<MDTuple>(ParameterTypes))));
2013-06-14 18:38:29 +00:00
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateFunction(
LLVMRustDIBuilderRef Builder, LLVMMetadataRef Scope, const char *Name,
const char *LinkageName, LLVMMetadataRef File, unsigned LineNo,
LLVMMetadataRef Ty, unsigned ScopeLine, LLVMRustDIFlags Flags,
LLVMRustDISPFlags SPFlags, LLVMValueRef Fn, LLVMMetadataRef TParam,
LLVMMetadataRef Decl) {
DITemplateParameterArray TParams =
DITemplateParameterArray(unwrap<MDTuple>(TParam));
#if LLVM_VERSION_GE(8, 0)
DISubprogram::DISPFlags llvmSPFlags = fromRust(SPFlags);
DINode::DIFlags llvmFlags = fromRust(Flags);
#if LLVM_VERSION_LT(9, 0)
if (isSet(SPFlags & LLVMRustDISPFlags::SPFlagMainSubprogram))
llvmFlags |= DINode::DIFlags::FlagMainSubprogram;
#endif
DISubprogram *Sub = Builder->createFunction(
unwrapDI<DIScope>(Scope), Name, LinkageName, unwrapDI<DIFile>(File),
LineNo, unwrapDI<DISubroutineType>(Ty), ScopeLine, llvmFlags,
llvmSPFlags, TParams, unwrapDIPtr<DISubprogram>(Decl));
#else
bool IsLocalToUnit = isSet(SPFlags & LLVMRustDISPFlags::SPFlagLocalToUnit);
bool IsDefinition = isSet(SPFlags & LLVMRustDISPFlags::SPFlagDefinition);
bool IsOptimized = isSet(SPFlags & LLVMRustDISPFlags::SPFlagOptimized);
DINode::DIFlags llvmFlags = fromRust(Flags);
if (isSet(SPFlags & LLVMRustDISPFlags::SPFlagMainSubprogram))
llvmFlags |= DINode::DIFlags::FlagMainSubprogram;
DISubprogram *Sub = Builder->createFunction(
unwrapDI<DIScope>(Scope), Name, LinkageName, unwrapDI<DIFile>(File),
LineNo, unwrapDI<DISubroutineType>(Ty), IsLocalToUnit, IsDefinition,
ScopeLine, llvmFlags, IsOptimized, TParams,
unwrapDIPtr<DISubprogram>(Decl));
#endif
unwrap<Function>(Fn)->setSubprogram(Sub);
return wrap(Sub);
2013-06-14 18:38:29 +00:00
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef
LLVMRustDIBuilderCreateBasicType(LLVMRustDIBuilderRef Builder, const char *Name,
uint64_t SizeInBits, uint32_t AlignInBits,
unsigned Encoding) {
2018-06-29 08:28:51 +00:00
return wrap(Builder->createBasicType(Name, SizeInBits, Encoding));
2013-06-14 18:38:29 +00:00
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreatePointerType(
LLVMRustDIBuilderRef Builder, LLVMMetadataRef PointeeTy,
uint64_t SizeInBits, uint32_t AlignInBits, const char *Name) {
return wrap(Builder->createPointerType(unwrapDI<DIType>(PointeeTy),
SizeInBits, AlignInBits,
/* DWARFAddressSpace */ None,
Name));
2013-06-14 18:38:29 +00:00
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateStructType(
LLVMRustDIBuilderRef Builder, LLVMMetadataRef Scope, const char *Name,
LLVMMetadataRef File, unsigned LineNumber, uint64_t SizeInBits,
uint32_t AlignInBits, LLVMRustDIFlags Flags,
2017-07-21 11:15:36 +00:00
LLVMMetadataRef DerivedFrom, LLVMMetadataRef Elements,
unsigned RunTimeLang, LLVMMetadataRef VTableHolder,
const char *UniqueId) {
return wrap(Builder->createStructType(
unwrapDI<DIDescriptor>(Scope), Name, unwrapDI<DIFile>(File), LineNumber,
SizeInBits, AlignInBits, fromRust(Flags), unwrapDI<DIType>(DerivedFrom),
DINodeArray(unwrapDI<MDTuple>(Elements)), RunTimeLang,
unwrapDI<DIType>(VTableHolder), UniqueId));
2013-06-14 18:38:29 +00:00
}
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateVariantPart(
LLVMRustDIBuilderRef Builder, LLVMMetadataRef Scope, const char *Name,
LLVMMetadataRef File, unsigned LineNumber, uint64_t SizeInBits,
uint32_t AlignInBits, LLVMRustDIFlags Flags, LLVMMetadataRef Discriminator,
LLVMMetadataRef Elements, const char *UniqueId) {
return wrap(Builder->createVariantPart(
unwrapDI<DIDescriptor>(Scope), Name, unwrapDI<DIFile>(File), LineNumber,
SizeInBits, AlignInBits, fromRust(Flags), unwrapDI<DIDerivedType>(Discriminator),
DINodeArray(unwrapDI<MDTuple>(Elements)), UniqueId));
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateMemberType(
LLVMRustDIBuilderRef Builder, LLVMMetadataRef Scope, const char *Name,
LLVMMetadataRef File, unsigned LineNo, uint64_t SizeInBits,
uint32_t AlignInBits, uint64_t OffsetInBits, LLVMRustDIFlags Flags,
2017-07-21 11:15:36 +00:00
LLVMMetadataRef Ty) {
return wrap(Builder->createMemberType(unwrapDI<DIDescriptor>(Scope), Name,
unwrapDI<DIFile>(File), LineNo,
SizeInBits, AlignInBits, OffsetInBits,
fromRust(Flags), unwrapDI<DIType>(Ty)));
2013-06-14 18:38:29 +00:00
}
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateVariantMemberType(
LLVMRustDIBuilderRef Builder, LLVMMetadataRef Scope,
const char *Name, LLVMMetadataRef File, unsigned LineNo, uint64_t SizeInBits,
uint32_t AlignInBits, uint64_t OffsetInBits, LLVMValueRef Discriminant,
LLVMRustDIFlags Flags, LLVMMetadataRef Ty) {
llvm::ConstantInt* D = nullptr;
if (Discriminant) {
D = unwrap<llvm::ConstantInt>(Discriminant);
}
return wrap(Builder->createVariantMemberType(unwrapDI<DIDescriptor>(Scope), Name,
unwrapDI<DIFile>(File), LineNo,
SizeInBits, AlignInBits, OffsetInBits, D,
fromRust(Flags), unwrapDI<DIType>(Ty)));
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateLexicalBlock(
LLVMRustDIBuilderRef Builder, LLVMMetadataRef Scope,
LLVMMetadataRef File, unsigned Line, unsigned Col) {
return wrap(Builder->createLexicalBlock(unwrapDI<DIDescriptor>(Scope),
unwrapDI<DIFile>(File), Line, Col));
2013-06-14 18:38:29 +00:00
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef
LLVMRustDIBuilderCreateLexicalBlockFile(LLVMRustDIBuilderRef Builder,
2017-07-21 11:15:36 +00:00
LLVMMetadataRef Scope,
LLVMMetadataRef File) {
return wrap(Builder->createLexicalBlockFile(unwrapDI<DIDescriptor>(Scope),
unwrapDI<DIFile>(File)));
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateStaticVariable(
LLVMRustDIBuilderRef Builder, LLVMMetadataRef Context, const char *Name,
const char *LinkageName, LLVMMetadataRef File, unsigned LineNo,
LLVMMetadataRef Ty, bool IsLocalToUnit, LLVMValueRef V,
LLVMMetadataRef Decl = nullptr, uint32_t AlignInBits = 0) {
2017-03-16 20:10:04 +00:00
llvm::GlobalVariable *InitVal = cast<llvm::GlobalVariable>(unwrap(V));
llvm::DIExpression *InitExpr = nullptr;
if (llvm::ConstantInt *IntVal = llvm::dyn_cast<llvm::ConstantInt>(InitVal)) {
InitExpr = Builder->createConstantValueExpression(
IntVal->getValue().getSExtValue());
} else if (llvm::ConstantFP *FPVal =
llvm::dyn_cast<llvm::ConstantFP>(InitVal)) {
InitExpr = Builder->createConstantValueExpression(
FPVal->getValueAPF().bitcastToAPInt().getZExtValue());
}
2017-03-16 20:10:04 +00:00
llvm::DIGlobalVariableExpression *VarExpr = Builder->createGlobalVariableExpression(
unwrapDI<DIDescriptor>(Context), Name, LinkageName,
unwrapDI<DIFile>(File), LineNo, unwrapDI<DIType>(Ty), IsLocalToUnit,
#if LLVM_VERSION_GE(10, 0)
/* isDefined */ true,
#endif
InitExpr, unwrapDIPtr<MDNode>(Decl),
#if LLVM_VERSION_GE(8, 0)
/* templateParams */ nullptr,
2018-11-07 12:05:54 +00:00
#endif
AlignInBits);
2017-03-16 20:10:04 +00:00
InitVal->setMetadata("dbg", VarExpr);
return wrap(VarExpr);
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateVariable(
LLVMRustDIBuilderRef Builder, unsigned Tag, LLVMMetadataRef Scope,
const char *Name, LLVMMetadataRef File, unsigned LineNo,
LLVMMetadataRef Ty, bool AlwaysPreserve, LLVMRustDIFlags Flags,
unsigned ArgNo, uint32_t AlignInBits) {
if (Tag == 0x100) { // DW_TAG_auto_variable
return wrap(Builder->createAutoVariable(
unwrapDI<DIDescriptor>(Scope), Name, unwrapDI<DIFile>(File), LineNo,
2018-06-29 08:28:51 +00:00
unwrapDI<DIType>(Ty), AlwaysPreserve, fromRust(Flags), AlignInBits));
} else {
return wrap(Builder->createParameterVariable(
unwrapDI<DIDescriptor>(Scope), Name, ArgNo, unwrapDI<DIFile>(File),
LineNo, unwrapDI<DIType>(Ty), AlwaysPreserve, fromRust(Flags)));
}
2013-06-14 18:38:29 +00:00
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef
LLVMRustDIBuilderCreateArrayType(LLVMRustDIBuilderRef Builder, uint64_t Size,
2017-07-21 11:15:36 +00:00
uint32_t AlignInBits, LLVMMetadataRef Ty,
LLVMMetadataRef Subscripts) {
return wrap(
Builder->createArrayType(Size, AlignInBits, unwrapDI<DIType>(Ty),
DINodeArray(unwrapDI<MDTuple>(Subscripts))));
2013-06-14 18:38:29 +00:00
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef
LLVMRustDIBuilderGetOrCreateSubrange(LLVMRustDIBuilderRef Builder, int64_t Lo,
int64_t Count) {
return wrap(Builder->getOrCreateSubrange(Lo, Count));
2013-06-14 18:38:29 +00:00
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef
LLVMRustDIBuilderGetOrCreateArray(LLVMRustDIBuilderRef Builder,
2017-07-21 11:15:36 +00:00
LLVMMetadataRef *Ptr, unsigned Count) {
Metadata **DataValue = unwrap(Ptr);
return wrap(
Builder->getOrCreateArray(ArrayRef<Metadata *>(DataValue, Count)).get());
2013-06-14 18:38:29 +00:00
}
extern "C" LLVMValueRef LLVMRustDIBuilderInsertDeclareAtEnd(
2017-07-21 11:15:36 +00:00
LLVMRustDIBuilderRef Builder, LLVMValueRef V, LLVMMetadataRef VarInfo,
int64_t *AddrOps, unsigned AddrOpsCount, LLVMValueRef DL,
LLVMBasicBlockRef InsertAtEnd) {
return wrap(Builder->insertDeclare(
unwrap(V), unwrap<DILocalVariable>(VarInfo),
Builder->createExpression(llvm::ArrayRef<int64_t>(AddrOps, AddrOpsCount)),
DebugLoc(cast<MDNode>(unwrap<MetadataAsValue>(DL)->getMetadata())),
unwrap(InsertAtEnd)));
}
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateEnumerator(
LLVMRustDIBuilderRef Builder, const char *Name, size_t NameLen,
int64_t Value, bool IsUnsigned) {
return wrap(Builder->createEnumerator({Name, NameLen}, Value, IsUnsigned));
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateEnumerationType(
LLVMRustDIBuilderRef Builder, LLVMMetadataRef Scope, const char *Name,
LLVMMetadataRef File, unsigned LineNumber, uint64_t SizeInBits,
uint32_t AlignInBits, LLVMMetadataRef Elements,
LLVMMetadataRef ClassTy, bool IsScoped) {
return wrap(Builder->createEnumerationType(
unwrapDI<DIDescriptor>(Scope), Name, unwrapDI<DIFile>(File), LineNumber,
SizeInBits, AlignInBits, DINodeArray(unwrapDI<MDTuple>(Elements)),
unwrapDI<DIType>(ClassTy), "", IsScoped));
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateUnionType(
LLVMRustDIBuilderRef Builder, LLVMMetadataRef Scope, const char *Name,
LLVMMetadataRef File, unsigned LineNumber, uint64_t SizeInBits,
uint32_t AlignInBits, LLVMRustDIFlags Flags, LLVMMetadataRef Elements,
unsigned RunTimeLang, const char *UniqueId) {
return wrap(Builder->createUnionType(
unwrapDI<DIDescriptor>(Scope), Name, unwrapDI<DIFile>(File), LineNumber,
SizeInBits, AlignInBits, fromRust(Flags),
DINodeArray(unwrapDI<MDTuple>(Elements)), RunTimeLang, UniqueId));
2013-07-28 07:48:16 +00:00
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef LLVMRustDIBuilderCreateTemplateTypeParameter(
LLVMRustDIBuilderRef Builder, LLVMMetadataRef Scope, const char *Name,
LLVMMetadataRef Ty, LLVMMetadataRef File, unsigned LineNo,
unsigned ColumnNo) {
return wrap(Builder->createTemplateTypeParameter(
unwrapDI<DIDescriptor>(Scope), Name, unwrapDI<DIType>(Ty)));
}
2017-07-21 11:15:36 +00:00
extern "C" LLVMMetadataRef
LLVMRustDIBuilderCreateNameSpace(LLVMRustDIBuilderRef Builder,
2017-07-21 11:15:36 +00:00
LLVMMetadataRef Scope, const char *Name,
LLVMMetadataRef File, unsigned LineNo) {
return wrap(Builder->createNameSpace(
unwrapDI<DIDescriptor>(Scope), Name,
false // ExportSymbols (only relevant for C++ anonymous namespaces)
));
}
extern "C" void
LLVMRustDICompositeTypeReplaceArrays(LLVMRustDIBuilderRef Builder,
LLVMMetadataRef CompositeTy,
LLVMMetadataRef Elements,
LLVMMetadataRef Params) {
DICompositeType *Tmp = unwrapDI<DICompositeType>(CompositeTy);
Builder->replaceArrays(Tmp, DINodeArray(unwrap<MDTuple>(Elements)),
DINodeArray(unwrap<MDTuple>(Params)));
}
extern "C" LLVMValueRef
LLVMRustDIBuilderCreateDebugLocation(LLVMContextRef ContextRef, unsigned Line,
2017-07-21 11:15:36 +00:00
unsigned Column, LLVMMetadataRef Scope,
LLVMMetadataRef InlinedAt) {
LLVMContext &Context = *unwrap(ContextRef);
2015-01-30 18:25:07 +00:00
DebugLoc debug_loc = DebugLoc::get(Line, Column, unwrapDIPtr<MDNode>(Scope),
unwrapDIPtr<MDNode>(InlinedAt));
2015-01-30 18:25:07 +00:00
return wrap(MetadataAsValue::get(Context, debug_loc.getAsMDNode()));
2015-01-30 18:25:07 +00:00
}
extern "C" int64_t LLVMRustDIBuilderCreateOpDeref() {
return dwarf::DW_OP_deref;
}
extern "C" int64_t LLVMRustDIBuilderCreateOpPlusUconst() {
return dwarf::DW_OP_plus_uconst;
}
extern "C" void LLVMRustWriteTypeToString(LLVMTypeRef Ty, RustStringRef Str) {
RawRustStringOstream OS(Str);
unwrap<llvm::Type>(Ty)->print(OS);
}
Implement LTO This commit implements LTO for rust leveraging LLVM's passes. What this means is: * When compiling an rlib, in addition to insdering foo.o into the archive, also insert foo.bc (the LLVM bytecode) of the optimized module. * When the compiler detects the -Z lto option, it will attempt to perform LTO on a staticlib or binary output. The compiler will emit an error if a dylib or rlib output is being generated. * The actual act of performing LTO is as follows: 1. Force all upstream libraries to have an rlib version available. 2. Load the bytecode of each upstream library from the rlib. 3. Link all this bytecode into the current LLVM module (just using llvm apis) 4. Run an internalization pass which internalizes all symbols except those found reachable for the local crate of compilation. 5. Run the LLVM LTO pass manager over this entire module 6a. If assembling an archive, then add all upstream rlibs into the output archive. This ignores all of the object/bitcode/metadata files rust generated and placed inside the rlibs. 6b. If linking a binary, create copies of all upstream rlibs, remove the rust-generated object-file, and then link everything as usual. As I have explained in #10741, this process is excruciatingly slow, so this is *not* turned on by default, and it is also why I have decided to hide it behind a -Z flag for now. The good news is that the binary sizes are about as small as they can be as a result of LTO, so it's definitely working. Closes #10741 Closes #10740
2013-12-03 07:19:29 +00:00
extern "C" void LLVMRustWriteValueToString(LLVMValueRef V,
RustStringRef Str) {
RawRustStringOstream OS(Str);
2017-05-18 15:43:52 +00:00
if (!V) {
OS << "(null)";
} else {
OS << "(";
unwrap<llvm::Value>(V)->getType()->print(OS);
OS << ":";
unwrap<llvm::Value>(V)->print(OS);
OS << ")";
}
}
// Note that the two following functions look quite similar to the
// LLVMGetSectionName function. Sadly, it appears that this function only
// returns a char* pointer, which isn't guaranteed to be null-terminated. The
// function provided by LLVM doesn't return the length, so we've created our own
// function which returns the length as well as the data pointer.
//
// For an example of this not returning a null terminated string, see
// lib/Object/COFFObjectFile.cpp in the getSectionName function. One of the
// branches explicitly creates a StringRef without a null terminator, and then
// that's returned.
inline section_iterator *unwrap(LLVMSectionIteratorRef SI) {
return reinterpret_cast<section_iterator *>(SI);
}
extern "C" size_t LLVMRustGetSectionName(LLVMSectionIteratorRef SI,
const char **Ptr) {
#if LLVM_VERSION_GE(10, 0)
auto NameOrErr = (*unwrap(SI))->getName();
if (!NameOrErr)
report_fatal_error(NameOrErr.takeError());
*Ptr = NameOrErr->data();
return NameOrErr->size();
#else
StringRef Ret;
if (std::error_code EC = (*unwrap(SI))->getName(Ret))
report_fatal_error(EC.message());
*Ptr = Ret.data();
return Ret.size();
#endif
}
// LLVMArrayType function does not support 64-bit ElementCount
extern "C" LLVMTypeRef LLVMRustArrayType(LLVMTypeRef ElementTy,
uint64_t ElementCount) {
return wrap(ArrayType::get(unwrap(ElementTy), ElementCount));
}
DEFINE_SIMPLE_CONVERSION_FUNCTIONS(Twine, LLVMTwineRef)
extern "C" void LLVMRustWriteTwineToString(LLVMTwineRef T, RustStringRef Str) {
RawRustStringOstream OS(Str);
unwrap(T)->print(OS);
}
extern "C" void LLVMRustUnpackOptimizationDiagnostic(
LLVMDiagnosticInfoRef DI, RustStringRef PassNameOut,
LLVMValueRef *FunctionOut, unsigned* Line, unsigned* Column,
RustStringRef FilenameOut, RustStringRef MessageOut) {
// Undefined to call this not on an optimization diagnostic!
llvm::DiagnosticInfoOptimizationBase *Opt =
static_cast<llvm::DiagnosticInfoOptimizationBase *>(unwrap(DI));
RawRustStringOstream PassNameOS(PassNameOut);
PassNameOS << Opt->getPassName();
*FunctionOut = wrap(&Opt->getFunction());
RawRustStringOstream FilenameOS(FilenameOut);
DiagnosticLocation loc = Opt->getLocation();
if (loc.isValid()) {
*Line = loc.getLine();
*Column = loc.getColumn();
#if LLVM_VERSION_GE(8, 0)
FilenameOS << loc.getAbsolutePath();
#else
FilenameOS << loc.getFilename();
#endif
}
RawRustStringOstream MessageOS(MessageOut);
MessageOS << Opt->getMsg();
}
extern "C" void
LLVMRustUnpackInlineAsmDiagnostic(LLVMDiagnosticInfoRef DI, unsigned *CookieOut,
LLVMTwineRef *MessageOut,
LLVMValueRef *InstructionOut) {
// Undefined to call this not on an inline assembly diagnostic!
llvm::DiagnosticInfoInlineAsm *IA =
static_cast<llvm::DiagnosticInfoInlineAsm *>(unwrap(DI));
2015-01-22 18:43:39 +00:00
*CookieOut = IA->getLocCookie();
*MessageOut = wrap(&IA->getMsgStr());
*InstructionOut = wrap(IA->getInstruction());
2015-01-22 18:43:39 +00:00
}
extern "C" void LLVMRustWriteDiagnosticInfoToString(LLVMDiagnosticInfoRef DI,
RustStringRef Str) {
RawRustStringOstream OS(Str);
DiagnosticPrinterRawOStream DP(OS);
unwrap(DI)->print(DP);
}
enum class LLVMRustDiagnosticKind {
Other,
InlineAsm,
StackSize,
DebugMetadataVersion,
SampleProfile,
OptimizationRemark,
OptimizationRemarkMissed,
OptimizationRemarkAnalysis,
OptimizationRemarkAnalysisFPCommute,
OptimizationRemarkAnalysisAliasing,
OptimizationRemarkOther,
OptimizationFailure,
PGOProfile,
Linker,
};
static LLVMRustDiagnosticKind toRust(DiagnosticKind Kind) {
switch (Kind) {
case DK_InlineAsm:
return LLVMRustDiagnosticKind::InlineAsm;
case DK_StackSize:
return LLVMRustDiagnosticKind::StackSize;
case DK_DebugMetadataVersion:
return LLVMRustDiagnosticKind::DebugMetadataVersion;
case DK_SampleProfile:
return LLVMRustDiagnosticKind::SampleProfile;
case DK_OptimizationRemark:
return LLVMRustDiagnosticKind::OptimizationRemark;
case DK_OptimizationRemarkMissed:
return LLVMRustDiagnosticKind::OptimizationRemarkMissed;
case DK_OptimizationRemarkAnalysis:
return LLVMRustDiagnosticKind::OptimizationRemarkAnalysis;
case DK_OptimizationRemarkAnalysisFPCommute:
return LLVMRustDiagnosticKind::OptimizationRemarkAnalysisFPCommute;
case DK_OptimizationRemarkAnalysisAliasing:
return LLVMRustDiagnosticKind::OptimizationRemarkAnalysisAliasing;
case DK_PGOProfile:
return LLVMRustDiagnosticKind::PGOProfile;
case DK_Linker:
return LLVMRustDiagnosticKind::Linker;
default:
return (Kind >= DK_FirstRemark && Kind <= DK_LastRemark)
? LLVMRustDiagnosticKind::OptimizationRemarkOther
: LLVMRustDiagnosticKind::Other;
}
}
extern "C" LLVMRustDiagnosticKind
LLVMRustGetDiagInfoKind(LLVMDiagnosticInfoRef DI) {
return toRust((DiagnosticKind)unwrap(DI)->getKind());
}
2016-08-02 21:25:19 +00:00
// This is kept distinct from LLVMGetTypeKind, because when
// a new type kind is added, the Rust-side enum must be
// updated or UB will result.
extern "C" LLVMTypeKind LLVMRustGetTypeKind(LLVMTypeRef Ty) {
switch (unwrap(Ty)->getTypeID()) {
case Type::VoidTyID:
return LLVMVoidTypeKind;
case Type::HalfTyID:
return LLVMHalfTypeKind;
case Type::FloatTyID:
return LLVMFloatTypeKind;
case Type::DoubleTyID:
return LLVMDoubleTypeKind;
case Type::X86_FP80TyID:
return LLVMX86_FP80TypeKind;
case Type::FP128TyID:
return LLVMFP128TypeKind;
case Type::PPC_FP128TyID:
return LLVMPPC_FP128TypeKind;
case Type::LabelTyID:
return LLVMLabelTypeKind;
case Type::MetadataTyID:
return LLVMMetadataTypeKind;
case Type::IntegerTyID:
return LLVMIntegerTypeKind;
case Type::FunctionTyID:
return LLVMFunctionTypeKind;
case Type::StructTyID:
return LLVMStructTypeKind;
case Type::ArrayTyID:
return LLVMArrayTypeKind;
case Type::PointerTyID:
return LLVMPointerTypeKind;
case Type::VectorTyID:
return LLVMVectorTypeKind;
case Type::X86_MMXTyID:
return LLVMX86_MMXTypeKind;
case Type::TokenTyID:
return LLVMTokenTypeKind;
}
report_fatal_error("Unhandled TypeID.");
2016-08-02 21:25:19 +00:00
}
DEFINE_SIMPLE_CONVERSION_FUNCTIONS(SMDiagnostic, LLVMSMDiagnosticRef)
extern "C" void LLVMRustSetInlineAsmDiagnosticHandler(
LLVMContextRef C, LLVMContext::InlineAsmDiagHandlerTy H, void *CX) {
unwrap(C)->setInlineAsmDiagnosticHandler(H, CX);
}
extern "C" void LLVMRustWriteSMDiagnosticToString(LLVMSMDiagnosticRef D,
RustStringRef Str) {
RawRustStringOstream OS(Str);
unwrap(D)->print("", OS);
}
extern "C" LLVMValueRef LLVMRustBuildCleanupPad(LLVMBuilderRef B,
LLVMValueRef ParentPad,
unsigned ArgCount,
LLVMValueRef *LLArgs,
const char *Name) {
Value **Args = unwrap(LLArgs);
if (ParentPad == nullptr) {
Type *Ty = Type::getTokenTy(unwrap(B)->getContext());
ParentPad = wrap(Constant::getNullValue(Ty));
}
return wrap(unwrap(B)->CreateCleanupPad(
unwrap(ParentPad), ArrayRef<Value *>(Args, ArgCount), Name));
trans: Reimplement unwinding on MSVC This commit transitions the compiler to using the new exception handling instructions in LLVM for implementing unwinding for MSVC. This affects both 32 and 64-bit MSVC as they're both now using SEH-based strategies. In terms of standard library support, lots more details about how SEH unwinding is implemented can be found in the commits. In terms of trans, this change necessitated a few modifications: * Branches were added to detect when the old landingpad instruction is used or the new cleanuppad instruction is used to `trans::cleanup`. * The return value from `cleanuppad` is not stored in an `alloca` (because it cannot be). * Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool` for indicating whether it's in a landing pad or not. The new exception handling intrinsics require that on MSVC each `call` inside of a landing pad is annotated with which landing pad that it's in. This change to the basic block means that whenever a `call` or `invoke` instruction is generated we know whether to annotate it as part of a cleanuppad or not. * Lots of modifications were made to the instruction builders to construct the new instructions as well as pass the tagging information for the call/invoke instructions. * The translation of the `try` intrinsics for MSVC has been overhauled to use the new `catchpad` instruction. The filter function is now also a rustc-generated function instead of a purely libstd-defined function. The libstd definition still exists, it just has a stable ABI across architectures and leaves some of the really weird implementation details to the compiler (e.g. the `localescape` and `localrecover` intrinsics).
2015-10-24 01:18:44 +00:00
}
extern "C" LLVMValueRef LLVMRustBuildCleanupRet(LLVMBuilderRef B,
LLVMValueRef CleanupPad,
LLVMBasicBlockRef UnwindBB) {
CleanupPadInst *Inst = cast<CleanupPadInst>(unwrap(CleanupPad));
return wrap(unwrap(B)->CreateCleanupRet(Inst, unwrap(UnwindBB)));
trans: Reimplement unwinding on MSVC This commit transitions the compiler to using the new exception handling instructions in LLVM for implementing unwinding for MSVC. This affects both 32 and 64-bit MSVC as they're both now using SEH-based strategies. In terms of standard library support, lots more details about how SEH unwinding is implemented can be found in the commits. In terms of trans, this change necessitated a few modifications: * Branches were added to detect when the old landingpad instruction is used or the new cleanuppad instruction is used to `trans::cleanup`. * The return value from `cleanuppad` is not stored in an `alloca` (because it cannot be). * Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool` for indicating whether it's in a landing pad or not. The new exception handling intrinsics require that on MSVC each `call` inside of a landing pad is annotated with which landing pad that it's in. This change to the basic block means that whenever a `call` or `invoke` instruction is generated we know whether to annotate it as part of a cleanuppad or not. * Lots of modifications were made to the instruction builders to construct the new instructions as well as pass the tagging information for the call/invoke instructions. * The translation of the `try` intrinsics for MSVC has been overhauled to use the new `catchpad` instruction. The filter function is now also a rustc-generated function instead of a purely libstd-defined function. The libstd definition still exists, it just has a stable ABI across architectures and leaves some of the really weird implementation details to the compiler (e.g. the `localescape` and `localrecover` intrinsics).
2015-10-24 01:18:44 +00:00
}
extern "C" LLVMValueRef
LLVMRustBuildCatchPad(LLVMBuilderRef B, LLVMValueRef ParentPad,
unsigned ArgCount, LLVMValueRef *LLArgs, const char *Name) {
Value **Args = unwrap(LLArgs);
return wrap(unwrap(B)->CreateCatchPad(
unwrap(ParentPad), ArrayRef<Value *>(Args, ArgCount), Name));
trans: Reimplement unwinding on MSVC This commit transitions the compiler to using the new exception handling instructions in LLVM for implementing unwinding for MSVC. This affects both 32 and 64-bit MSVC as they're both now using SEH-based strategies. In terms of standard library support, lots more details about how SEH unwinding is implemented can be found in the commits. In terms of trans, this change necessitated a few modifications: * Branches were added to detect when the old landingpad instruction is used or the new cleanuppad instruction is used to `trans::cleanup`. * The return value from `cleanuppad` is not stored in an `alloca` (because it cannot be). * Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool` for indicating whether it's in a landing pad or not. The new exception handling intrinsics require that on MSVC each `call` inside of a landing pad is annotated with which landing pad that it's in. This change to the basic block means that whenever a `call` or `invoke` instruction is generated we know whether to annotate it as part of a cleanuppad or not. * Lots of modifications were made to the instruction builders to construct the new instructions as well as pass the tagging information for the call/invoke instructions. * The translation of the `try` intrinsics for MSVC has been overhauled to use the new `catchpad` instruction. The filter function is now also a rustc-generated function instead of a purely libstd-defined function. The libstd definition still exists, it just has a stable ABI across architectures and leaves some of the really weird implementation details to the compiler (e.g. the `localescape` and `localrecover` intrinsics).
2015-10-24 01:18:44 +00:00
}
extern "C" LLVMValueRef LLVMRustBuildCatchRet(LLVMBuilderRef B,
LLVMValueRef Pad,
LLVMBasicBlockRef BB) {
return wrap(unwrap(B)->CreateCatchRet(cast<CatchPadInst>(unwrap(Pad)),
unwrap(BB)));
trans: Reimplement unwinding on MSVC This commit transitions the compiler to using the new exception handling instructions in LLVM for implementing unwinding for MSVC. This affects both 32 and 64-bit MSVC as they're both now using SEH-based strategies. In terms of standard library support, lots more details about how SEH unwinding is implemented can be found in the commits. In terms of trans, this change necessitated a few modifications: * Branches were added to detect when the old landingpad instruction is used or the new cleanuppad instruction is used to `trans::cleanup`. * The return value from `cleanuppad` is not stored in an `alloca` (because it cannot be). * Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool` for indicating whether it's in a landing pad or not. The new exception handling intrinsics require that on MSVC each `call` inside of a landing pad is annotated with which landing pad that it's in. This change to the basic block means that whenever a `call` or `invoke` instruction is generated we know whether to annotate it as part of a cleanuppad or not. * Lots of modifications were made to the instruction builders to construct the new instructions as well as pass the tagging information for the call/invoke instructions. * The translation of the `try` intrinsics for MSVC has been overhauled to use the new `catchpad` instruction. The filter function is now also a rustc-generated function instead of a purely libstd-defined function. The libstd definition still exists, it just has a stable ABI across architectures and leaves some of the really weird implementation details to the compiler (e.g. the `localescape` and `localrecover` intrinsics).
2015-10-24 01:18:44 +00:00
}
extern "C" LLVMValueRef LLVMRustBuildCatchSwitch(LLVMBuilderRef B,
LLVMValueRef ParentPad,
LLVMBasicBlockRef BB,
unsigned NumHandlers,
const char *Name) {
if (ParentPad == nullptr) {
Type *Ty = Type::getTokenTy(unwrap(B)->getContext());
ParentPad = wrap(Constant::getNullValue(Ty));
}
return wrap(unwrap(B)->CreateCatchSwitch(unwrap(ParentPad), unwrap(BB),
NumHandlers, Name));
trans: Reimplement unwinding on MSVC This commit transitions the compiler to using the new exception handling instructions in LLVM for implementing unwinding for MSVC. This affects both 32 and 64-bit MSVC as they're both now using SEH-based strategies. In terms of standard library support, lots more details about how SEH unwinding is implemented can be found in the commits. In terms of trans, this change necessitated a few modifications: * Branches were added to detect when the old landingpad instruction is used or the new cleanuppad instruction is used to `trans::cleanup`. * The return value from `cleanuppad` is not stored in an `alloca` (because it cannot be). * Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool` for indicating whether it's in a landing pad or not. The new exception handling intrinsics require that on MSVC each `call` inside of a landing pad is annotated with which landing pad that it's in. This change to the basic block means that whenever a `call` or `invoke` instruction is generated we know whether to annotate it as part of a cleanuppad or not. * Lots of modifications were made to the instruction builders to construct the new instructions as well as pass the tagging information for the call/invoke instructions. * The translation of the `try` intrinsics for MSVC has been overhauled to use the new `catchpad` instruction. The filter function is now also a rustc-generated function instead of a purely libstd-defined function. The libstd definition still exists, it just has a stable ABI across architectures and leaves some of the really weird implementation details to the compiler (e.g. the `localescape` and `localrecover` intrinsics).
2015-10-24 01:18:44 +00:00
}
extern "C" void LLVMRustAddHandler(LLVMValueRef CatchSwitchRef,
LLVMBasicBlockRef Handler) {
Value *CatchSwitch = unwrap(CatchSwitchRef);
cast<CatchSwitchInst>(CatchSwitch)->addHandler(unwrap(Handler));
trans: Reimplement unwinding on MSVC This commit transitions the compiler to using the new exception handling instructions in LLVM for implementing unwinding for MSVC. This affects both 32 and 64-bit MSVC as they're both now using SEH-based strategies. In terms of standard library support, lots more details about how SEH unwinding is implemented can be found in the commits. In terms of trans, this change necessitated a few modifications: * Branches were added to detect when the old landingpad instruction is used or the new cleanuppad instruction is used to `trans::cleanup`. * The return value from `cleanuppad` is not stored in an `alloca` (because it cannot be). * Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool` for indicating whether it's in a landing pad or not. The new exception handling intrinsics require that on MSVC each `call` inside of a landing pad is annotated with which landing pad that it's in. This change to the basic block means that whenever a `call` or `invoke` instruction is generated we know whether to annotate it as part of a cleanuppad or not. * Lots of modifications were made to the instruction builders to construct the new instructions as well as pass the tagging information for the call/invoke instructions. * The translation of the `try` intrinsics for MSVC has been overhauled to use the new `catchpad` instruction. The filter function is now also a rustc-generated function instead of a purely libstd-defined function. The libstd definition still exists, it just has a stable ABI across architectures and leaves some of the really weird implementation details to the compiler (e.g. the `localescape` and `localrecover` intrinsics).
2015-10-24 01:18:44 +00:00
}
extern "C" OperandBundleDef *LLVMRustBuildOperandBundleDef(const char *Name,
LLVMValueRef *Inputs,
unsigned NumInputs) {
trans: Reimplement unwinding on MSVC This commit transitions the compiler to using the new exception handling instructions in LLVM for implementing unwinding for MSVC. This affects both 32 and 64-bit MSVC as they're both now using SEH-based strategies. In terms of standard library support, lots more details about how SEH unwinding is implemented can be found in the commits. In terms of trans, this change necessitated a few modifications: * Branches were added to detect when the old landingpad instruction is used or the new cleanuppad instruction is used to `trans::cleanup`. * The return value from `cleanuppad` is not stored in an `alloca` (because it cannot be). * Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool` for indicating whether it's in a landing pad or not. The new exception handling intrinsics require that on MSVC each `call` inside of a landing pad is annotated with which landing pad that it's in. This change to the basic block means that whenever a `call` or `invoke` instruction is generated we know whether to annotate it as part of a cleanuppad or not. * Lots of modifications were made to the instruction builders to construct the new instructions as well as pass the tagging information for the call/invoke instructions. * The translation of the `try` intrinsics for MSVC has been overhauled to use the new `catchpad` instruction. The filter function is now also a rustc-generated function instead of a purely libstd-defined function. The libstd definition still exists, it just has a stable ABI across architectures and leaves some of the really weird implementation details to the compiler (e.g. the `localescape` and `localrecover` intrinsics).
2015-10-24 01:18:44 +00:00
return new OperandBundleDef(Name, makeArrayRef(unwrap(Inputs), NumInputs));
}
extern "C" void LLVMRustFreeOperandBundleDef(OperandBundleDef *Bundle) {
trans: Reimplement unwinding on MSVC This commit transitions the compiler to using the new exception handling instructions in LLVM for implementing unwinding for MSVC. This affects both 32 and 64-bit MSVC as they're both now using SEH-based strategies. In terms of standard library support, lots more details about how SEH unwinding is implemented can be found in the commits. In terms of trans, this change necessitated a few modifications: * Branches were added to detect when the old landingpad instruction is used or the new cleanuppad instruction is used to `trans::cleanup`. * The return value from `cleanuppad` is not stored in an `alloca` (because it cannot be). * Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool` for indicating whether it's in a landing pad or not. The new exception handling intrinsics require that on MSVC each `call` inside of a landing pad is annotated with which landing pad that it's in. This change to the basic block means that whenever a `call` or `invoke` instruction is generated we know whether to annotate it as part of a cleanuppad or not. * Lots of modifications were made to the instruction builders to construct the new instructions as well as pass the tagging information for the call/invoke instructions. * The translation of the `try` intrinsics for MSVC has been overhauled to use the new `catchpad` instruction. The filter function is now also a rustc-generated function instead of a purely libstd-defined function. The libstd definition still exists, it just has a stable ABI across architectures and leaves some of the really weird implementation details to the compiler (e.g. the `localescape` and `localrecover` intrinsics).
2015-10-24 01:18:44 +00:00
delete Bundle;
}
extern "C" LLVMValueRef LLVMRustBuildCall(LLVMBuilderRef B, LLVMValueRef Fn,
LLVMValueRef *Args, unsigned NumArgs,
OperandBundleDef *Bundle,
const char *Name) {
unsigned Len = Bundle ? 1 : 0;
ArrayRef<OperandBundleDef> Bundles = makeArrayRef(Bundle, Len);
return wrap(unwrap(B)->CreateCall(
unwrap(Fn), makeArrayRef(unwrap(Args), NumArgs), Bundles, Name));
trans: Reimplement unwinding on MSVC This commit transitions the compiler to using the new exception handling instructions in LLVM for implementing unwinding for MSVC. This affects both 32 and 64-bit MSVC as they're both now using SEH-based strategies. In terms of standard library support, lots more details about how SEH unwinding is implemented can be found in the commits. In terms of trans, this change necessitated a few modifications: * Branches were added to detect when the old landingpad instruction is used or the new cleanuppad instruction is used to `trans::cleanup`. * The return value from `cleanuppad` is not stored in an `alloca` (because it cannot be). * Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool` for indicating whether it's in a landing pad or not. The new exception handling intrinsics require that on MSVC each `call` inside of a landing pad is annotated with which landing pad that it's in. This change to the basic block means that whenever a `call` or `invoke` instruction is generated we know whether to annotate it as part of a cleanuppad or not. * Lots of modifications were made to the instruction builders to construct the new instructions as well as pass the tagging information for the call/invoke instructions. * The translation of the `try` intrinsics for MSVC has been overhauled to use the new `catchpad` instruction. The filter function is now also a rustc-generated function instead of a purely libstd-defined function. The libstd definition still exists, it just has a stable ABI across architectures and leaves some of the really weird implementation details to the compiler (e.g. the `localescape` and `localrecover` intrinsics).
2015-10-24 01:18:44 +00:00
}
extern "C" LLVMValueRef LLVMRustBuildMemCpy(LLVMBuilderRef B,
LLVMValueRef Dst, unsigned DstAlign,
LLVMValueRef Src, unsigned SrcAlign,
LLVMValueRef Size, bool IsVolatile) {
#if LLVM_VERSION_GE(10, 0)
return wrap(unwrap(B)->CreateMemCpy(
unwrap(Dst), MaybeAlign(DstAlign),
unwrap(Src), MaybeAlign(SrcAlign),
unwrap(Size), IsVolatile));
#else
return wrap(unwrap(B)->CreateMemCpy(
unwrap(Dst), DstAlign,
unwrap(Src), SrcAlign,
unwrap(Size), IsVolatile));
#endif
}
extern "C" LLVMValueRef LLVMRustBuildMemMove(LLVMBuilderRef B,
LLVMValueRef Dst, unsigned DstAlign,
LLVMValueRef Src, unsigned SrcAlign,
LLVMValueRef Size, bool IsVolatile) {
#if LLVM_VERSION_GE(10, 0)
return wrap(unwrap(B)->CreateMemMove(
unwrap(Dst), MaybeAlign(DstAlign),
unwrap(Src), MaybeAlign(SrcAlign),
unwrap(Size), IsVolatile));
#else
return wrap(unwrap(B)->CreateMemMove(
unwrap(Dst), DstAlign,
unwrap(Src), SrcAlign,
unwrap(Size), IsVolatile));
#endif
}
extern "C" LLVMValueRef LLVMRustBuildMemSet(LLVMBuilderRef B,
LLVMValueRef Dst, unsigned DstAlign,
LLVMValueRef Val,
LLVMValueRef Size, bool IsVolatile) {
return wrap(unwrap(B)->CreateMemSet(
unwrap(Dst), unwrap(Val), unwrap(Size), DstAlign, IsVolatile));
}
trans: Reimplement unwinding on MSVC This commit transitions the compiler to using the new exception handling instructions in LLVM for implementing unwinding for MSVC. This affects both 32 and 64-bit MSVC as they're both now using SEH-based strategies. In terms of standard library support, lots more details about how SEH unwinding is implemented can be found in the commits. In terms of trans, this change necessitated a few modifications: * Branches were added to detect when the old landingpad instruction is used or the new cleanuppad instruction is used to `trans::cleanup`. * The return value from `cleanuppad` is not stored in an `alloca` (because it cannot be). * Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool` for indicating whether it's in a landing pad or not. The new exception handling intrinsics require that on MSVC each `call` inside of a landing pad is annotated with which landing pad that it's in. This change to the basic block means that whenever a `call` or `invoke` instruction is generated we know whether to annotate it as part of a cleanuppad or not. * Lots of modifications were made to the instruction builders to construct the new instructions as well as pass the tagging information for the call/invoke instructions. * The translation of the `try` intrinsics for MSVC has been overhauled to use the new `catchpad` instruction. The filter function is now also a rustc-generated function instead of a purely libstd-defined function. The libstd definition still exists, it just has a stable ABI across architectures and leaves some of the really weird implementation details to the compiler (e.g. the `localescape` and `localrecover` intrinsics).
2015-10-24 01:18:44 +00:00
extern "C" LLVMValueRef
LLVMRustBuildInvoke(LLVMBuilderRef B, LLVMValueRef Fn, LLVMValueRef *Args,
unsigned NumArgs, LLVMBasicBlockRef Then,
LLVMBasicBlockRef Catch, OperandBundleDef *Bundle,
trans: Reimplement unwinding on MSVC This commit transitions the compiler to using the new exception handling instructions in LLVM for implementing unwinding for MSVC. This affects both 32 and 64-bit MSVC as they're both now using SEH-based strategies. In terms of standard library support, lots more details about how SEH unwinding is implemented can be found in the commits. In terms of trans, this change necessitated a few modifications: * Branches were added to detect when the old landingpad instruction is used or the new cleanuppad instruction is used to `trans::cleanup`. * The return value from `cleanuppad` is not stored in an `alloca` (because it cannot be). * Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool` for indicating whether it's in a landing pad or not. The new exception handling intrinsics require that on MSVC each `call` inside of a landing pad is annotated with which landing pad that it's in. This change to the basic block means that whenever a `call` or `invoke` instruction is generated we know whether to annotate it as part of a cleanuppad or not. * Lots of modifications were made to the instruction builders to construct the new instructions as well as pass the tagging information for the call/invoke instructions. * The translation of the `try` intrinsics for MSVC has been overhauled to use the new `catchpad` instruction. The filter function is now also a rustc-generated function instead of a purely libstd-defined function. The libstd definition still exists, it just has a stable ABI across architectures and leaves some of the really weird implementation details to the compiler (e.g. the `localescape` and `localrecover` intrinsics).
2015-10-24 01:18:44 +00:00
const char *Name) {
unsigned Len = Bundle ? 1 : 0;
ArrayRef<OperandBundleDef> Bundles = makeArrayRef(Bundle, Len);
return wrap(unwrap(B)->CreateInvoke(unwrap(Fn), unwrap(Then), unwrap(Catch),
makeArrayRef(unwrap(Args), NumArgs),
Bundles, Name));
trans: Reimplement unwinding on MSVC This commit transitions the compiler to using the new exception handling instructions in LLVM for implementing unwinding for MSVC. This affects both 32 and 64-bit MSVC as they're both now using SEH-based strategies. In terms of standard library support, lots more details about how SEH unwinding is implemented can be found in the commits. In terms of trans, this change necessitated a few modifications: * Branches were added to detect when the old landingpad instruction is used or the new cleanuppad instruction is used to `trans::cleanup`. * The return value from `cleanuppad` is not stored in an `alloca` (because it cannot be). * Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool` for indicating whether it's in a landing pad or not. The new exception handling intrinsics require that on MSVC each `call` inside of a landing pad is annotated with which landing pad that it's in. This change to the basic block means that whenever a `call` or `invoke` instruction is generated we know whether to annotate it as part of a cleanuppad or not. * Lots of modifications were made to the instruction builders to construct the new instructions as well as pass the tagging information for the call/invoke instructions. * The translation of the `try` intrinsics for MSVC has been overhauled to use the new `catchpad` instruction. The filter function is now also a rustc-generated function instead of a purely libstd-defined function. The libstd definition still exists, it just has a stable ABI across architectures and leaves some of the really weird implementation details to the compiler (e.g. the `localescape` and `localrecover` intrinsics).
2015-10-24 01:18:44 +00:00
}
extern "C" void LLVMRustPositionBuilderAtStart(LLVMBuilderRef B,
LLVMBasicBlockRef BB) {
auto Point = unwrap(BB)->getFirstInsertionPt();
unwrap(B)->SetInsertPoint(unwrap(BB), Point);
}
extern "C" void LLVMRustSetComdat(LLVMModuleRef M, LLVMValueRef V,
const char *Name, size_t NameLen) {
Triple TargetTriple(unwrap(M)->getTargetTriple());
GlobalObject *GV = unwrap<GlobalObject>(V);
if (!TargetTriple.isOSBinFormatMachO()) {
StringRef NameRef(Name, NameLen);
GV->setComdat(unwrap(M)->getOrInsertComdat(NameRef));
}
}
extern "C" void LLVMRustUnsetComdat(LLVMValueRef V) {
GlobalObject *GV = unwrap<GlobalObject>(V);
GV->setComdat(nullptr);
}
enum class LLVMRustLinkage {
ExternalLinkage = 0,
AvailableExternallyLinkage = 1,
LinkOnceAnyLinkage = 2,
LinkOnceODRLinkage = 3,
WeakAnyLinkage = 4,
WeakODRLinkage = 5,
AppendingLinkage = 6,
InternalLinkage = 7,
PrivateLinkage = 8,
ExternalWeakLinkage = 9,
CommonLinkage = 10,
};
static LLVMRustLinkage toRust(LLVMLinkage Linkage) {
switch (Linkage) {
case LLVMExternalLinkage:
return LLVMRustLinkage::ExternalLinkage;
case LLVMAvailableExternallyLinkage:
return LLVMRustLinkage::AvailableExternallyLinkage;
case LLVMLinkOnceAnyLinkage:
return LLVMRustLinkage::LinkOnceAnyLinkage;
case LLVMLinkOnceODRLinkage:
return LLVMRustLinkage::LinkOnceODRLinkage;
case LLVMWeakAnyLinkage:
return LLVMRustLinkage::WeakAnyLinkage;
case LLVMWeakODRLinkage:
return LLVMRustLinkage::WeakODRLinkage;
case LLVMAppendingLinkage:
return LLVMRustLinkage::AppendingLinkage;
case LLVMInternalLinkage:
return LLVMRustLinkage::InternalLinkage;
case LLVMPrivateLinkage:
return LLVMRustLinkage::PrivateLinkage;
case LLVMExternalWeakLinkage:
return LLVMRustLinkage::ExternalWeakLinkage;
case LLVMCommonLinkage:
return LLVMRustLinkage::CommonLinkage;
default:
report_fatal_error("Invalid LLVMRustLinkage value!");
}
}
static LLVMLinkage fromRust(LLVMRustLinkage Linkage) {
switch (Linkage) {
case LLVMRustLinkage::ExternalLinkage:
return LLVMExternalLinkage;
case LLVMRustLinkage::AvailableExternallyLinkage:
return LLVMAvailableExternallyLinkage;
case LLVMRustLinkage::LinkOnceAnyLinkage:
return LLVMLinkOnceAnyLinkage;
case LLVMRustLinkage::LinkOnceODRLinkage:
return LLVMLinkOnceODRLinkage;
case LLVMRustLinkage::WeakAnyLinkage:
return LLVMWeakAnyLinkage;
case LLVMRustLinkage::WeakODRLinkage:
return LLVMWeakODRLinkage;
case LLVMRustLinkage::AppendingLinkage:
return LLVMAppendingLinkage;
case LLVMRustLinkage::InternalLinkage:
return LLVMInternalLinkage;
case LLVMRustLinkage::PrivateLinkage:
return LLVMPrivateLinkage;
case LLVMRustLinkage::ExternalWeakLinkage:
return LLVMExternalWeakLinkage;
case LLVMRustLinkage::CommonLinkage:
return LLVMCommonLinkage;
}
report_fatal_error("Invalid LLVMRustLinkage value!");
}
extern "C" LLVMRustLinkage LLVMRustGetLinkage(LLVMValueRef V) {
return toRust(LLVMGetLinkage(V));
}
extern "C" void LLVMRustSetLinkage(LLVMValueRef V,
LLVMRustLinkage RustLinkage) {
LLVMSetLinkage(V, fromRust(RustLinkage));
}
// Returns true if both high and low were successfully set. Fails in case constant wasnt any of
// the common sizes (1, 8, 16, 32, 64, 128 bits)
extern "C" bool LLVMRustConstInt128Get(LLVMValueRef CV, bool sext, uint64_t *high, uint64_t *low)
{
auto C = unwrap<llvm::ConstantInt>(CV);
if (C->getBitWidth() > 128) { return false; }
APInt AP;
if (sext) {
AP = C->getValue().sextOrSelf(128);
} else {
AP = C->getValue().zextOrSelf(128);
}
*low = AP.getLoBits(64).getZExtValue();
*high = AP.getHiBits(64).getZExtValue();
return true;
}
enum class LLVMRustVisibility {
Default = 0,
Hidden = 1,
Protected = 2,
};
static LLVMRustVisibility toRust(LLVMVisibility Vis) {
switch (Vis) {
case LLVMDefaultVisibility:
return LLVMRustVisibility::Default;
case LLVMHiddenVisibility:
return LLVMRustVisibility::Hidden;
case LLVMProtectedVisibility:
return LLVMRustVisibility::Protected;
}
report_fatal_error("Invalid LLVMRustVisibility value!");
}
static LLVMVisibility fromRust(LLVMRustVisibility Vis) {
switch (Vis) {
case LLVMRustVisibility::Default:
return LLVMDefaultVisibility;
case LLVMRustVisibility::Hidden:
return LLVMHiddenVisibility;
case LLVMRustVisibility::Protected:
return LLVMProtectedVisibility;
}
report_fatal_error("Invalid LLVMRustVisibility value!");
}
extern "C" LLVMRustVisibility LLVMRustGetVisibility(LLVMValueRef V) {
return toRust(LLVMGetVisibility(V));
}
2017-02-10 17:29:39 +00:00
// Oh hey, a binding that makes sense for once? (because LLVMs own do not)
extern "C" LLVMValueRef LLVMRustBuildIntCast(LLVMBuilderRef B, LLVMValueRef Val,
LLVMTypeRef DestTy, bool isSigned) {
return wrap(unwrap(B)->CreateIntCast(unwrap(Val), unwrap(DestTy), isSigned, ""));
}
extern "C" void LLVMRustSetVisibility(LLVMValueRef V,
LLVMRustVisibility RustVisibility) {
LLVMSetVisibility(V, fromRust(RustVisibility));
}
rustc: Enable LTO and multiple codegen units This commit is a refactoring of the LTO backend in Rust to support compilations with multiple codegen units. The immediate result of this PR is to remove the artificial error emitted by rustc about `-C lto -C codegen-units-8`, but longer term this is intended to lay the groundwork for LTO with incremental compilation and ultimately be the underpinning of ThinLTO support. The problem here that needed solving is that when rustc is producing multiple codegen units in one compilation LTO needs to merge them all together. Previously only upstream dependencies were merged and it was inherently relied on that there was only one local codegen unit. Supporting this involved refactoring the optimization backend architecture for rustc, namely splitting the `optimize_and_codegen` function into `optimize` and `codegen`. After an LLVM module has been optimized it may be blocked and queued up for LTO, and only after LTO are modules code generated. Non-LTO compilations should look the same as they do today backend-wise, we'll spin up a thread for each codegen unit and optimize/codegen in that thread. LTO compilations will, however, send the LLVM module back to the coordinator thread once optimizations have finished. When all LLVM modules have finished optimizing the coordinator will invoke the LTO backend, producing a further list of LLVM modules. Currently this is always a list of one LLVM module. The coordinator then spawns further work to run LTO and code generation passes over each module. In the course of this refactoring a number of other pieces were refactored: * Management of the bytecode encoding in rlibs was centralized into one module instead of being scattered across LTO and linking. * Some internal refactorings on the link stage of the compiler was done to work directly from `CompiledModule` structures instead of lists of paths. * The trans time-graph output was tweaked a little to include a name on each bar and inflate the size of the bars a little
2017-07-23 15:14:38 +00:00
struct LLVMRustModuleBuffer {
std::string data;
};
extern "C" LLVMRustModuleBuffer*
LLVMRustModuleBufferCreate(LLVMModuleRef M) {
2019-12-31 13:08:25 +00:00
#if LLVM_VERSION_GE(10, 0)
auto Ret = std::make_unique<LLVMRustModuleBuffer>();
#else
rustc: Enable LTO and multiple codegen units This commit is a refactoring of the LTO backend in Rust to support compilations with multiple codegen units. The immediate result of this PR is to remove the artificial error emitted by rustc about `-C lto -C codegen-units-8`, but longer term this is intended to lay the groundwork for LTO with incremental compilation and ultimately be the underpinning of ThinLTO support. The problem here that needed solving is that when rustc is producing multiple codegen units in one compilation LTO needs to merge them all together. Previously only upstream dependencies were merged and it was inherently relied on that there was only one local codegen unit. Supporting this involved refactoring the optimization backend architecture for rustc, namely splitting the `optimize_and_codegen` function into `optimize` and `codegen`. After an LLVM module has been optimized it may be blocked and queued up for LTO, and only after LTO are modules code generated. Non-LTO compilations should look the same as they do today backend-wise, we'll spin up a thread for each codegen unit and optimize/codegen in that thread. LTO compilations will, however, send the LLVM module back to the coordinator thread once optimizations have finished. When all LLVM modules have finished optimizing the coordinator will invoke the LTO backend, producing a further list of LLVM modules. Currently this is always a list of one LLVM module. The coordinator then spawns further work to run LTO and code generation passes over each module. In the course of this refactoring a number of other pieces were refactored: * Management of the bytecode encoding in rlibs was centralized into one module instead of being scattered across LTO and linking. * Some internal refactorings on the link stage of the compiler was done to work directly from `CompiledModule` structures instead of lists of paths. * The trans time-graph output was tweaked a little to include a name on each bar and inflate the size of the bars a little
2017-07-23 15:14:38 +00:00
auto Ret = llvm::make_unique<LLVMRustModuleBuffer>();
2019-12-31 13:08:25 +00:00
#endif
rustc: Enable LTO and multiple codegen units This commit is a refactoring of the LTO backend in Rust to support compilations with multiple codegen units. The immediate result of this PR is to remove the artificial error emitted by rustc about `-C lto -C codegen-units-8`, but longer term this is intended to lay the groundwork for LTO with incremental compilation and ultimately be the underpinning of ThinLTO support. The problem here that needed solving is that when rustc is producing multiple codegen units in one compilation LTO needs to merge them all together. Previously only upstream dependencies were merged and it was inherently relied on that there was only one local codegen unit. Supporting this involved refactoring the optimization backend architecture for rustc, namely splitting the `optimize_and_codegen` function into `optimize` and `codegen`. After an LLVM module has been optimized it may be blocked and queued up for LTO, and only after LTO are modules code generated. Non-LTO compilations should look the same as they do today backend-wise, we'll spin up a thread for each codegen unit and optimize/codegen in that thread. LTO compilations will, however, send the LLVM module back to the coordinator thread once optimizations have finished. When all LLVM modules have finished optimizing the coordinator will invoke the LTO backend, producing a further list of LLVM modules. Currently this is always a list of one LLVM module. The coordinator then spawns further work to run LTO and code generation passes over each module. In the course of this refactoring a number of other pieces were refactored: * Management of the bytecode encoding in rlibs was centralized into one module instead of being scattered across LTO and linking. * Some internal refactorings on the link stage of the compiler was done to work directly from `CompiledModule` structures instead of lists of paths. * The trans time-graph output was tweaked a little to include a name on each bar and inflate the size of the bars a little
2017-07-23 15:14:38 +00:00
{
raw_string_ostream OS(Ret->data);
{
legacy::PassManager PM;
PM.add(createBitcodeWriterPass(OS));
PM.run(*unwrap(M));
}
}
return Ret.release();
}
extern "C" void
LLVMRustModuleBufferFree(LLVMRustModuleBuffer *Buffer) {
delete Buffer;
}
extern "C" const void*
LLVMRustModuleBufferPtr(const LLVMRustModuleBuffer *Buffer) {
return Buffer->data.data();
}
extern "C" size_t
LLVMRustModuleBufferLen(const LLVMRustModuleBuffer *Buffer) {
return Buffer->data.length();
}
extern "C" uint64_t
LLVMRustModuleCost(LLVMModuleRef M) {
2017-12-08 10:23:23 +00:00
auto f = unwrap(M)->functions();
return std::distance(std::begin(f), std::end(f));
rustc: Enable LTO and multiple codegen units This commit is a refactoring of the LTO backend in Rust to support compilations with multiple codegen units. The immediate result of this PR is to remove the artificial error emitted by rustc about `-C lto -C codegen-units-8`, but longer term this is intended to lay the groundwork for LTO with incremental compilation and ultimately be the underpinning of ThinLTO support. The problem here that needed solving is that when rustc is producing multiple codegen units in one compilation LTO needs to merge them all together. Previously only upstream dependencies were merged and it was inherently relied on that there was only one local codegen unit. Supporting this involved refactoring the optimization backend architecture for rustc, namely splitting the `optimize_and_codegen` function into `optimize` and `codegen`. After an LLVM module has been optimized it may be blocked and queued up for LTO, and only after LTO are modules code generated. Non-LTO compilations should look the same as they do today backend-wise, we'll spin up a thread for each codegen unit and optimize/codegen in that thread. LTO compilations will, however, send the LLVM module back to the coordinator thread once optimizations have finished. When all LLVM modules have finished optimizing the coordinator will invoke the LTO backend, producing a further list of LLVM modules. Currently this is always a list of one LLVM module. The coordinator then spawns further work to run LTO and code generation passes over each module. In the course of this refactoring a number of other pieces were refactored: * Management of the bytecode encoding in rlibs was centralized into one module instead of being scattered across LTO and linking. * Some internal refactorings on the link stage of the compiler was done to work directly from `CompiledModule` structures instead of lists of paths. * The trans time-graph output was tweaked a little to include a name on each bar and inflate the size of the bars a little
2017-07-23 15:14:38 +00:00
}
// Vector reductions:
extern "C" LLVMValueRef
LLVMRustBuildVectorReduceFAdd(LLVMBuilderRef B, LLVMValueRef Acc, LLVMValueRef Src) {
return wrap(unwrap(B)->CreateFAddReduce(unwrap(Acc),unwrap(Src)));
}
extern "C" LLVMValueRef
LLVMRustBuildVectorReduceFMul(LLVMBuilderRef B, LLVMValueRef Acc, LLVMValueRef Src) {
return wrap(unwrap(B)->CreateFMulReduce(unwrap(Acc),unwrap(Src)));
}
extern "C" LLVMValueRef
LLVMRustBuildVectorReduceAdd(LLVMBuilderRef B, LLVMValueRef Src) {
return wrap(unwrap(B)->CreateAddReduce(unwrap(Src)));
}
extern "C" LLVMValueRef
LLVMRustBuildVectorReduceMul(LLVMBuilderRef B, LLVMValueRef Src) {
return wrap(unwrap(B)->CreateMulReduce(unwrap(Src)));
}
extern "C" LLVMValueRef
LLVMRustBuildVectorReduceAnd(LLVMBuilderRef B, LLVMValueRef Src) {
return wrap(unwrap(B)->CreateAndReduce(unwrap(Src)));
}
extern "C" LLVMValueRef
LLVMRustBuildVectorReduceOr(LLVMBuilderRef B, LLVMValueRef Src) {
return wrap(unwrap(B)->CreateOrReduce(unwrap(Src)));
}
extern "C" LLVMValueRef
LLVMRustBuildVectorReduceXor(LLVMBuilderRef B, LLVMValueRef Src) {
return wrap(unwrap(B)->CreateXorReduce(unwrap(Src)));
}
extern "C" LLVMValueRef
LLVMRustBuildVectorReduceMin(LLVMBuilderRef B, LLVMValueRef Src, bool IsSigned) {
return wrap(unwrap(B)->CreateIntMinReduce(unwrap(Src), IsSigned));
}
extern "C" LLVMValueRef
LLVMRustBuildVectorReduceMax(LLVMBuilderRef B, LLVMValueRef Src, bool IsSigned) {
return wrap(unwrap(B)->CreateIntMaxReduce(unwrap(Src), IsSigned));
}
extern "C" LLVMValueRef
LLVMRustBuildVectorReduceFMin(LLVMBuilderRef B, LLVMValueRef Src, bool NoNaN) {
return wrap(unwrap(B)->CreateFPMinReduce(unwrap(Src), NoNaN));
}
extern "C" LLVMValueRef
LLVMRustBuildVectorReduceFMax(LLVMBuilderRef B, LLVMValueRef Src, bool NoNaN) {
return wrap(unwrap(B)->CreateFPMaxReduce(unwrap(Src), NoNaN));
}
2018-03-14 21:12:38 +00:00
2018-03-21 20:49:22 +00:00
extern "C" LLVMValueRef
LLVMRustBuildMinNum(LLVMBuilderRef B, LLVMValueRef LHS, LLVMValueRef RHS) {
return wrap(unwrap(B)->CreateMinNum(unwrap(LHS),unwrap(RHS)));
}
extern "C" LLVMValueRef
LLVMRustBuildMaxNum(LLVMBuilderRef B, LLVMValueRef LHS, LLVMValueRef RHS) {
return wrap(unwrap(B)->CreateMaxNum(unwrap(LHS),unwrap(RHS)));
}