nordic-dev.net/rust
nordic-dev.net/rust
2
0
Fork 0
mirror of https://github.com/rust-lang/rust.git synced 2024-11-24 07:44:10 +00:00
Code Issues Packages Projects Releases Wiki Activity
1547c076bf
rust/tests/ui/proc-macro/nested-macro-rules.rs

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

25 lines
635 B
Rust
Raw Normal View History

Insert NoDelim groups around nonterminals when lowering macro_rules
2020-06-21 00:59:04 +00:00
//@ run-pass
//@ aux-build:nested-macro-rules.rs
//@ aux-build:test-macros.rs
Always preserve `None`-delimited groups in a captured `TokenStream` Previously, we would silently remove any `None`-delimiters when capturing a `TokenStream`, 'flattenting' them to their inner tokens. This was not normally visible, since we usually have `TokenKind::Interpolated` (which gets converted to a `None`-delimited group during macro invocation) instead of an actual `None`-delimited group. However, there are a couple of cases where this becomes visible to proc-macros: 1. A cross-crate `macro_rules!` macro has a `None`-delimited group stored in its body (as a result of being produced by another `macro_rules!` macro). The cross-crate `macro_rules!` invocation can then expand to an attribute macro invocation, which needs to be able to see the `None`-delimited group. 2. A proc-macro can invoke an attribute proc-macro with its re-collected input. If there are any nonterminals present in the input, they will get re-collected to `None`-delimited groups, which will then get captured as part of the attribute macro invocation. Both of these cases are incredibly obscure, so there hopefully won't be any breakage. This change will allow more agressive 'flattenting' of nonterminals in #82608 without losing `None`-delimited groups.
2021-03-27 03:23:20 +00:00
//@ compile-flags: -Z span-debug -Z macro-backtrace
Insert NoDelim groups around nonterminals when lowering macro_rules
2020-06-21 00:59:04 +00:00
//@ edition:2018
Remove normalization of `Span` debug output in proc-macro tests Fixes #74800 The definition of `is_x86_feature_detected!` (and similar macros) depends on the platform - it is produced by a `cfg_if!` invocation on x86, and a plain `#[cfg]` on other platforms. Since it is part of the prelude, we will end up importing different hygiene information depending on the platform. This previously required us to avoid printing raw `SyntaxContext` ids in any tests that uses the standard library, since the captured output will be platform-dependent. Previously, we replaced all `SyntaxContext` ids with "#CTXT", and the raw `Span` lo/hi bytes with "LO..HI". This commit adds `#![no_std]` and `extern crate std` to all proc-macro tests that print spans. This suppresses the prelude import, while still using lang items from `std` (which gives us a buildable binary). With this apporach, we will only load hygiene information for things which we explicitly import. This lets us re-add `-Z unpretty=expanded,hygiene`, since its output can now be made stable across all platforms. Additionally, we use `-Z span-debug` in more places, which lets us avoid the "LO..HI" normalization hack.
2020-08-09 17:36:31 +00:00
#![no_std] // Don't load unnecessary hygiene information from std
extern crate std;
Insert NoDelim groups around nonterminals when lowering macro_rules
2020-06-21 00:59:04 +00:00
extern crate nested_macro_rules;
extern crate test_macros;
Always preserve `None`-delimited groups in a captured `TokenStream` Previously, we would silently remove any `None`-delimiters when capturing a `TokenStream`, 'flattenting' them to their inner tokens. This was not normally visible, since we usually have `TokenKind::Interpolated` (which gets converted to a `None`-delimited group during macro invocation) instead of an actual `None`-delimited group. However, there are a couple of cases where this becomes visible to proc-macros: 1. A cross-crate `macro_rules!` macro has a `None`-delimited group stored in its body (as a result of being produced by another `macro_rules!` macro). The cross-crate `macro_rules!` invocation can then expand to an attribute macro invocation, which needs to be able to see the `None`-delimited group. 2. A proc-macro can invoke an attribute proc-macro with its re-collected input. If there are any nonterminals present in the input, they will get re-collected to `None`-delimited groups, which will then get captured as part of the attribute macro invocation. Both of these cases are incredibly obscure, so there hopefully won't be any breakage. This change will allow more agressive 'flattenting' of nonterminals in #82608 without losing `None`-delimited groups.
2021-03-27 03:23:20 +00:00
use test_macros::{print_bang, print_attr};
Insert NoDelim groups around nonterminals when lowering macro_rules
2020-06-21 00:59:04 +00:00
use nested_macro_rules::FirstStruct;
struct SecondStruct;
fn main() {
Always preserve `None`-delimited groups in a captured `TokenStream` Previously, we would silently remove any `None`-delimiters when capturing a `TokenStream`, 'flattenting' them to their inner tokens. This was not normally visible, since we usually have `TokenKind::Interpolated` (which gets converted to a `None`-delimited group during macro invocation) instead of an actual `None`-delimited group. However, there are a couple of cases where this becomes visible to proc-macros: 1. A cross-crate `macro_rules!` macro has a `None`-delimited group stored in its body (as a result of being produced by another `macro_rules!` macro). The cross-crate `macro_rules!` invocation can then expand to an attribute macro invocation, which needs to be able to see the `None`-delimited group. 2. A proc-macro can invoke an attribute proc-macro with its re-collected input. If there are any nonterminals present in the input, they will get re-collected to `None`-delimited groups, which will then get captured as part of the attribute macro invocation. Both of these cases are incredibly obscure, so there hopefully won't be any breakage. This change will allow more agressive 'flattenting' of nonterminals in #82608 without losing `None`-delimited groups.
2021-03-27 03:23:20 +00:00
nested_macro_rules::inner_macro!(print_bang, print_attr);
Insert NoDelim groups around nonterminals when lowering macro_rules
2020-06-21 00:59:04 +00:00
Always preserve `None`-delimited groups in a captured `TokenStream` Previously, we would silently remove any `None`-delimiters when capturing a `TokenStream`, 'flattenting' them to their inner tokens. This was not normally visible, since we usually have `TokenKind::Interpolated` (which gets converted to a `None`-delimited group during macro invocation) instead of an actual `None`-delimited group. However, there are a couple of cases where this becomes visible to proc-macros: 1. A cross-crate `macro_rules!` macro has a `None`-delimited group stored in its body (as a result of being produced by another `macro_rules!` macro). The cross-crate `macro_rules!` invocation can then expand to an attribute macro invocation, which needs to be able to see the `None`-delimited group. 2. A proc-macro can invoke an attribute proc-macro with its re-collected input. If there are any nonterminals present in the input, they will get re-collected to `None`-delimited groups, which will then get captured as part of the attribute macro invocation. Both of these cases are incredibly obscure, so there hopefully won't be any breakage. This change will allow more agressive 'flattenting' of nonterminals in #82608 without losing `None`-delimited groups.
2021-03-27 03:23:20 +00:00
nested_macro_rules::outer_macro!(SecondStruct, SecondAttrStruct);
Implement RFC3373 non local definitions lint
2024-01-26 14:25:18 +00:00
//~^ WARN non-local `macro_rules!` definition
Always preserve `None`-delimited groups in a captured `TokenStream` Previously, we would silently remove any `None`-delimiters when capturing a `TokenStream`, 'flattenting' them to their inner tokens. This was not normally visible, since we usually have `TokenKind::Interpolated` (which gets converted to a `None`-delimited group during macro invocation) instead of an actual `None`-delimited group. However, there are a couple of cases where this becomes visible to proc-macros: 1. A cross-crate `macro_rules!` macro has a `None`-delimited group stored in its body (as a result of being produced by another `macro_rules!` macro). The cross-crate `macro_rules!` invocation can then expand to an attribute macro invocation, which needs to be able to see the `None`-delimited group. 2. A proc-macro can invoke an attribute proc-macro with its re-collected input. If there are any nonterminals present in the input, they will get re-collected to `None`-delimited groups, which will then get captured as part of the attribute macro invocation. Both of these cases are incredibly obscure, so there hopefully won't be any breakage. This change will allow more agressive 'flattenting' of nonterminals in #82608 without losing `None`-delimited groups.
2021-03-27 03:23:20 +00:00
inner_macro!(print_bang, print_attr);
Insert NoDelim groups around nonterminals when lowering macro_rules
2020-06-21 00:59:04 +00:00
}
Reference in New Issue Copy Permalink