rust/tests/ui/threads-sendsync/issue-4446.rs

//@ run-pass
//@ needs-threads

use std::sync::mpsc::channel;
use std::thread;

pub fn main() {
    let (tx, rx) = channel();

    tx.send("hello, world").unwrap();

    thread::spawn(move || {
        println!("{}", rx.recv().unwrap());
    })
    .join()
    .ok()
    .unwrap();
}
[AUTO-GENERATED] Migrate ui tests from `//` to `//@` directives 2024-02-16 20:02:50 +00:00			`//@ run-pass`
compiletest: Add a `//@ needs-threads` directive This commit is extracted from #122036 and adds a new directive to the `compiletest` test runner, `//@ needs-threads`. This is intended to capture the need that a target must implement threading to execute a specific test, typically one that uses `std::thread`. This is primarily done for WebAssembly targets which currently do not have threads by default. This enables transitioning a lot of `//@ ignore-wasm*`-style ignores into a more self-documenting `//@ needs-threads` directive. Additionally the `wasm32-wasi-preview1-threads` target, for example, does actually have threads, but isn't tested in CI at this time. This change enables running these tests for that target, but not other wasm targets. 2024-03-06 20:19:20 +00:00			`//@ needs-threads`
Ignore tests that use threads on emscripten 2016-02-11 11:34:41 +00:00
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change] 2014-12-23 19:53:35 +00:00			`use std::sync::mpsc::channel;`
Test fixes and rebase conflicts 2015-02-17 23:24:34 +00:00			`use std::thread;`
Remove re-exports of std::io::stdio::{print, println} in the prelude. The `print!` and `println!` macros are now the preferred method of printing, and so there is no reason to export the `stdio` functions in the prelude. The functions have also been replaced by their macro counterparts in the tutorial and other documentation so that newcomers don't get confused about what they should be using. 2014-01-09 10:06:55 +00:00
Fix run-pass tests to have 'pub fn main' This is required by the check-fast target because each test is slurped up into a submodule. 2013-09-25 07:43:37 +00:00			`pub fn main() {`
std: Rename Chan/Port types and constructor * Chan<T> => Sender<T> * Port<T> => Receiver<T> * Chan::new() => channel() * constructor returns (Sender, Receiver) instead of (Receiver, Sender) * local variables named `port` renamed to `rx` * local variables named `chan` renamed to `tx` Closes #11765 2014-03-09 21:58:32 +00:00			`let (tx, rx) = channel();`
testsuite: Add test cases, some xfailed Closes #5060 Closes #4446 Closes #5192 2013-06-27 23:53:40 +00:00
std: Second pass stabilization for `comm` This commit is a second pass stabilization for the `std::comm` module, performing the following actions: * The entire `std::comm` module was moved under `std::sync::mpsc`. This movement reflects that channels are just yet another synchronization primitive, and they don't necessarily deserve a special place outside of the other concurrency primitives that the standard library offers. * The `send` and `recv` methods have all been removed. * The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`. This means that all send/receive operations return a `Result` now indicating whether the operation was successful or not. * The error type of `send` is now a `SendError` to implement a custom error message and allow for `unwrap()`. The error type contains an `into_inner` method to extract the value. * The error type of `recv` is now `RecvError` for the same reasons as `send`. * The `TryRecvError` and `TrySendError` types have had public reexports removed of their variants and the variant names have been tweaked with enum namespacing rules. * The `Messages` iterator is renamed to `Iter` This functionality is now all `#[stable]`: * `Sender` * `SyncSender` * `Receiver` * `std::sync::mpsc` * `channel` * `sync_channel` * `Iter` * `Sender::send` * `Sender::clone` * `SyncSender::send` * `SyncSender::try_send` * `SyncSender::clone` * `Receiver::recv` * `Receiver::try_recv` * `Receiver::iter` * `SendError` * `RecvError` * `TrySendError::{mod, Full, Disconnected}` * `TryRecvError::{mod, Empty, Disconnected}` * `SendError::into_inner` * `TrySendError::into_inner` This is a breaking change due to the modification of where this module is located, as well as the changing of the semantics of `send` and `recv`. Most programs just need to rename imports of `std::comm` to `std::sync::mpsc` and add calls to `unwrap` after a send or a receive operation. [breaking-change] 2014-12-23 19:53:35 +00:00			`tx.send("hello, world").unwrap();`
librustc: Try to resolve before coercions. 2014-06-03 19:38:00 +00:00
format code in tests/ui/threads-sendsync 2024-08-24 03:32:52 +00:00			`thread::spawn(move \|\| {`
test: Fix fallout in run-pass tests 2015-04-10 18:12:43 +00:00			`println!("{}", rx.recv().unwrap());`
format code in tests/ui/threads-sendsync 2024-08-24 03:32:52 +00:00			`})`
			`.join()`
			`.ok()`
			`.unwrap();`
testsuite: Add test cases, some xfailed Closes #5060 Closes #4446 Closes #5192 2013-06-27 23:53:40 +00:00			`}`