nixpkgs/pkgs/os-specific/linux/systemd/default.nix
Eelco Dolstra e65ff3b72a systemd: Prevent privilege escalation via polkit
Cherry-picked from upstream.  Also applied a fix for the CPUShares
configuration option while I'm at it.

CVE-2013-4327
2013-09-30 13:30:15 +02:00

153 lines
6.0 KiB
Nix

{ stdenv, fetchurl, pkgconfig, intltool, gperf, libcap, dbus, kmod
, xz, pam, acl, cryptsetup, libuuid, m4, utillinux
, glib, kbd, libxslt, coreutils, libgcrypt, sysvtools, docbook_xsl
, kexectools
}:
assert stdenv.isLinux;
stdenv.mkDerivation rec {
version = "203";
name = "systemd-${version}";
src = fetchurl {
url = "http://www.freedesktop.org/software/systemd/${name}.tar.xz";
sha256 = "07gvn3rpski8sh1nz16npjf2bvj0spsjdwc5px9685g2pi6kxcb1";
};
patches =
[ ./0001-Make-systemctl-daemon-reexec-do-the-right-thing-on-N.patch
./0002-Ignore-duplicate-paths-in-systemctl-start.patch
./0003-Start-device-units-for-uninitialised-encrypted-devic.patch
./0004-Set-switch-to-configuration-hints-for-some-units.patch
./0005-sysinit.target-Drop-the-dependency-on-local-fs.targe.patch
./0006-Don-t-call-plymouth-quit.patch
./0007-Ignore-IPv6-link-local-addresses.patch
./0008-Don-t-try-to-unmount-nix-or-nix-store.patch
./0009-Start-ctrl-alt-del.target-irreversibly.patch
./0010-Fix-CPUShares-configuration-option.patch
./0011-polkit-Avoid-race-condition-in-scraping-proc.patch
] ++ stdenv.lib.optional stdenv.isArm ./libc-bug-accept4-arm.patch;
buildInputs =
[ pkgconfig intltool gperf libcap dbus.libs kmod xz pam acl
/* cryptsetup */ libuuid m4 glib libxslt libgcrypt docbook_xsl
];
configureFlags =
[ "--localstatedir=/var"
"--sysconfdir=/etc"
"--with-rootprefix=$(out)"
"--with-kbd-loadkeys=${kbd}/bin/loadkeys"
"--with-kbd-setfont=${kbd}/bin/setfont"
"--with-rootprefix=$(out)"
"--with-dbusinterfacedir=$(out)/share/dbus-1/interfaces"
"--with-dbuspolicydir=$(out)/etc/dbus-1/system.d"
"--with-dbussystemservicedir=$(out)/share/dbus-1/system-services"
"--with-dbussessionservicedir=$(out)/share/dbus-1/services"
"--with-firmware-path=/root/test-firmware:/run/current-system/firmware"
"--with-tty-gid=3" # tty in NixOS has gid 3
];
preConfigure =
''
# FIXME: patch this in systemd properly (and send upstream).
# FIXME: use sulogin from util-linux once updated.
for i in src/remount-fs/remount-fs.c src/core/mount.c src/core/swap.c src/fsck/fsck.c units/emergency.service.in units/rescue.service.m4.in src/journal/cat.c src/core/shutdown.c; do
test -e $i
substituteInPlace $i \
--replace /bin/mount ${utillinux}/bin/mount \
--replace /bin/umount ${utillinux}/bin/umount \
--replace /sbin/swapon ${utillinux}/sbin/swapon \
--replace /sbin/swapoff ${utillinux}/sbin/swapoff \
--replace /sbin/fsck ${utillinux}/sbin/fsck \
--replace /bin/echo ${coreutils}/bin/echo \
--replace /bin/cat ${coreutils}/bin/cat \
--replace /sbin/sulogin ${sysvtools}/sbin/sulogin \
--replace /sbin/kexec ${kexectools}/sbin/kexec
done
substituteInPlace src/journal/catalog.c \
--replace /usr/lib/systemd/catalog/ $out/lib/systemd/catalog/
'';
PYTHON_BINARY = "${coreutils}/bin/env python"; # don't want a build time dependency on Python
NIX_CFLAGS_COMPILE =
[ # Can't say ${polkit}/bin/pkttyagent here because that would
# lead to a cyclic dependency.
"-UPOLKIT_AGENT_BINARY_PATH" "-DPOLKIT_AGENT_BINARY_PATH=\"/run/current-system/sw/bin/pkttyagent\""
"-fno-stack-protector"
# Work around our kernel headers being too old. FIXME: remove
# this after the next stdenv update.
"-DFS_NOCOW_FL=0x00800000"
# Set the release_agent on /sys/fs/cgroup/systemd to the
# currently running systemd (/run/current-system/systemd) so
# that we don't use an obsolete/garbage-collected release agent.
"-USYSTEMD_CGROUP_AGENT_PATH" "-DSYSTEMD_CGROUP_AGENT_PATH=\"/run/current-system/systemd/lib/systemd/systemd-cgroups-agent\""
];
# Use /var/lib/udev rather than /etc/udev for the generated hardware
# database. Upstream doesn't want this (see commit
# 1e1954f53386cb773e2a152748dd31c4d36aa2d8) because using /var is
# forbidden in early boot, but in NixOS the initrd guarantees that
# /var is mounted.
makeFlags = "hwdb_bin=/var/lib/udev/hwdb.bin";
installFlags = "localstatedir=$(TMPDIR)/var sysconfdir=$(out)/etc sysvinitdir=$(TMPDIR)/etc/init.d";
# Get rid of configuration-specific data.
postInstall =
''
mkdir -p $out/example/systemd
mv $out/lib/{modules-load.d,binfmt.d,sysctl.d,tmpfiles.d} $out/example
mv $out/lib/systemd/{system,user} $out/example/systemd
# Install SysV compatibility commands.
mkdir -p $out/sbin
ln -s $out/lib/systemd/systemd $out/sbin/telinit
for i in init halt poweroff runlevel reboot shutdown; do
ln -s $out/bin/systemctl $out/sbin/$i
done
# Fix reference to /bin/false in the D-Bus services.
for i in $out/share/dbus-1/system-services/*.service; do
substituteInPlace $i --replace /bin/false ${coreutils}/bin/false
done
rm -rf $out/etc/rpm
''; # */
enableParallelBuilding = true;
# The interface version prevents NixOS from switching to an
# incompatible systemd at runtime. (Switching across reboots is
# fine, of course.) It should be increased whenever systemd changes
# in a backwards-incompatible way. If the interface version of two
# systemd builds is the same, then we can switch between them at
# runtime; otherwise we can't and we need to reboot.
passthru.interfaceVersion = 2;
passthru.headers = stdenv.mkDerivation {
name = "systemd-headers-${version}";
inherit src;
phases = [ "unpackPhase" "installPhase" ];
# some are needed by dbus.libs, which is needed for systemd :-)
installPhase = ''
mkdir -p "$out/include/systemd"
mv src/systemd/*.h "$out/include/systemd"
'';
};
meta = {
homepage = "http://www.freedesktop.org/wiki/Software/systemd";
description = "A system and service manager for Linux";
platforms = stdenv.lib.platforms.linux;
maintainers = [ stdenv.lib.maintainers.eelco stdenv.lib.maintainers.simons ];
};
}