nixpkgs/pkgs/development/embedded/openocd/default.nix
2023-08-09 20:10:19 +10:00

86 lines
2.7 KiB
Nix

{ stdenv
, lib
, fetchurl
, pkg-config
, hidapi
, jimtcl
, libjaylink
, libusb1
, libgpiod
, enableFtdi ? true, libftdi1
# Allow selection the hardware targets (SBCs, JTAG Programmers, JTAG Adapters)
, extraHardwareSupport ? []
}:
stdenv.mkDerivation rec {
pname = "openocd";
version = "0.12.0";
src = fetchurl {
url = "mirror://sourceforge/project/${pname}/${pname}/${version}/${pname}-${version}.tar.bz2";
sha256 = "sha256-ryVHiL6Yhh8r2RA/5uYKd07Jaow3R0Tu+Rl/YEMHWvo=";
};
nativeBuildInputs = [ pkg-config ];
buildInputs = [ hidapi jimtcl libftdi1 libjaylink libusb1 ]
++
# tracking issue for v2 api changes https://sourceforge.net/p/openocd/tickets/306/
lib.optional stdenv.isLinux (libgpiod.overrideAttrs (old: rec {
version = "1.6.4";
src = fetchurl {
url = "https://git.kernel.org/pub/scm/libs/libgpiod/libgpiod.git/snapshot/libgpiod-${version}.tar.gz";
sha256 = "sha256-gp1KwmjfB4U2CdZ8/H9HbpqnNssqaKYwvpno+tGXvgo=";
};
}));
configureFlags = [
"--disable-werror"
"--disable-internal-jimtcl"
"--disable-internal-libjaylink"
"--enable-jtag_vpi"
"--enable-buspirate"
"--enable-remote-bitbang"
(lib.enableFeature enableFtdi "ftdi")
(lib.enableFeature stdenv.isLinux "linuxgpiod")
(lib.enableFeature stdenv.isLinux "sysfsgpio")
] ++
map (hardware: "--enable-${hardware}") extraHardwareSupport
;
enableParallelBuilding = true;
env.NIX_CFLAGS_COMPILE = toString (lib.optionals stdenv.cc.isGNU [
"-Wno-error=cpp"
"-Wno-error=strict-prototypes" # fixes build failure with hidapi 0.10.0
]);
postInstall = lib.optionalString stdenv.isLinux ''
mkdir -p "$out/etc/udev/rules.d"
rules="$out/share/openocd/contrib/60-openocd.rules"
if [ ! -f "$rules" ]; then
echo "$rules is missing, must update the Nix file."
exit 1
fi
ln -s "$rules" "$out/etc/udev/rules.d/"
'';
meta = with lib; {
description = "Free and Open On-Chip Debugging, In-System Programming and Boundary-Scan Testing";
longDescription = ''
OpenOCD provides on-chip programming and debugging support with a layered
architecture of JTAG interface and TAP support, debug target support
(e.g. ARM, MIPS), and flash chip drivers (e.g. CFI, NAND, etc.). Several
network interfaces are available for interactiving with OpenOCD: HTTP,
telnet, TCL, and GDB. The GDB server enables OpenOCD to function as a
"remote target" for source-level debugging of embedded systems using the
GNU GDB program.
'';
homepage = "https://openocd.sourceforge.net/";
license = licenses.gpl2Plus;
maintainers = with maintainers; [ bjornfor prusnak ];
platforms = platforms.unix;
};
}