nixpkgs/pkgs/build-support/gcc-wrapper/builder.sh
2012-12-29 15:11:32 +01:00

196 lines
5.4 KiB
Bash

source $stdenv/setup
mkdir -p $out/bin
mkdir -p $out/nix-support
if test -z "$nativeLibc"; then
dynamicLinker="$libc/lib/$dynamicLinker"
echo $dynamicLinker > $out/nix-support/dynamic-linker
if test -e $libc/lib/32/ld-linux.so.2; then
echo $libc/lib/32/ld-linux.so.2 > $out/nix-support/dynamic-linker-m32
fi
# The "-B$libc/lib/" flag is a quick hack to force gcc to link
# against the crt1.o from our own glibc, rather than the one in
# /usr/lib. (This is only an issue when using an `impure'
# compiler/linker, i.e., one that searches /usr/lib and so on.)
#
# Unfortunately, setting -B appears to override the default search
# path. Thus, the gcc-specific "../includes-fixed" directory is
# now longer searched and glibc's <limits.h> header fails to
# compile, because it uses "#include_next <limits.h>" to find the
# limits.h file in ../includes-fixed. To remedy the problem,
# another -idirafter is necessary to add that directory again.
echo "-B$libc/lib/ -idirafter $libc/include -idirafter $gcc/lib/gcc/*/*/include-fixed" > $out/nix-support/libc-cflags
echo "-L$libc/lib" > $out/nix-support/libc-ldflags
# The dynamic linker is passed in `ldflagsBefore' to allow
# explicit overrides of the dynamic linker by callers to gcc/ld
# (the *last* value counts, so ours should come first).
echo "-dynamic-linker $dynamicLinker" > $out/nix-support/libc-ldflags-before
fi
if test -n "$nativeTools"; then
gccPath="$nativePrefix/bin"
ldPath="$nativePrefix/bin"
else
if test -e "$gcc/lib64"; then
gccLDFlags="$gccLDFlags -L$gcc/lib64"
fi
gccLDFlags="$gccLDFlags -L$gcc/lib"
if [ -n "$langVhdl" ]; then
gccLDFlags="$gccLDFlags -L$zlib/lib"
fi
echo "$gccLDFlags" > $out/nix-support/gcc-ldflags
# GCC shows $gcc/lib in `gcc -print-search-dirs', but not
# $gcc/lib64 (even though it does actually search there...)..
# This confuses libtool. So add it to the compiler tool search
# path explicitly.
if test -e "$gcc/lib64"; then
gccCFlags="$gccCFlags -B$gcc/lib64"
fi
# Find the gcc libraries path (may work only without multilib)
if [ -n "$langAda" ]; then
basePath=`echo $gcc/lib/*/*/*`
gccCFlags="$gccCFlags -B$basePath -I$basePath/adainclude"
gnatCFlags="-aI$basePath/adainclude -aO$basePath/adalib"
echo "$gnatCFlags" > $out/nix-support/gnat-cflags
fi
echo "$gccCFlags" > $out/nix-support/gcc-cflags
gccPath="$gcc/bin"
ldPath="$binutils/bin"
fi
doSubstitute() {
local src=$1
local dst=$2
# Can't use substitute() here, because replace may not have been
# built yet (in the bootstrap).
sed \
-e "s^@out@^$out^g" \
-e "s^@shell@^$shell^g" \
-e "s^@gcc@^$gcc^g" \
-e "s^@gccProg@^$gccProg^g" \
-e "s^@gnatProg@^$gnatProg^g" \
-e "s^@gnatlinkProg@^$gnatlinkProg^g" \
-e "s^@binutils@^$binutils^g" \
-e "s^@coreutils@^$coreutils^g" \
-e "s^@libc@^$libc^g" \
-e "s^@ld@^$ldPath/ld^g" \
< "$src" > "$dst"
}
# Make wrapper scripts around gcc, g++, and gfortran. Also make symlinks
# cc, c++, and f77.
mkGccWrapper() {
local dst=$1
local src=$2
if ! test -f "$src"; then
echo "$src does not exist (skipping)"
return 1
fi
gccProg="$src"
doSubstitute "$gccWrapper" "$dst"
chmod +x "$dst"
}
mkGnatWrapper() {
local dst=$1
local src=$2
if ! test -f "$src"; then
echo "$src does not exist (skipping)"
return 1
fi
gnatProg="$src"
doSubstitute "$gnatWrapper" "$dst"
chmod +x "$dst"
}
mkGnatLinkWrapper() {
local dst=$1
local src=$2
if ! test -f "$src"; then
echo "$src does not exist (skipping)"
return 1
fi
gnatlinkProg="$src"
doSubstitute "$gnatlinkWrapper" "$dst"
chmod +x "$dst"
}
if mkGccWrapper $out/bin/gcc $gccPath/gcc
then
ln -sv gcc $out/bin/cc
fi
if mkGccWrapper $out/bin/g++ $gccPath/g++
then
ln -sv g++ $out/bin/c++
fi
if mkGccWrapper $out/bin/gfortran $gccPath/gfortran
then
ln -sv gfortran $out/bin/g77
ln -sv gfortran $out/bin/f77
fi
mkGccWrapper $out/bin/gcj $gccPath/gcj || true
mkGccWrapper $out/bin/gccgo $gccPath/gccgo || true
mkGccWrapper $out/bin/gnatgcc $gccPath/gnatgcc || true
mkGnatWrapper $out/bin/gnatmake $gccPath/gnatmake || true
mkGnatWrapper $out/bin/gnatbind $gccPath/gnatbind || true
mkGnatLinkWrapper $out/bin/gnatlink $gccPath/gnatlink || true
if [ -f $gccPath/ghdl ]; then
ln -sf $gccPath/ghdl $out/bin/ghdl
fi
# Create a symlink to as (the assembler). This is useful when a
# gcc-wrapper is installed in a user environment, as it ensures that
# the right assembler is called.
ln -s $ldPath/as $out/bin/as
# Make a wrapper around the linker.
doSubstitute "$ldWrapper" "$out/bin/ld"
chmod +x "$out/bin/ld"
# Emit a setup hook. Also store the path to the original GCC and
# Glibc.
test -n "$gcc" && echo $gcc > $out/nix-support/orig-gcc
test -n "$libc" && echo $libc > $out/nix-support/orig-libc
doSubstitute "$addFlags" "$out/nix-support/add-flags.sh"
doSubstitute "$setupHook" "$out/nix-support/setup-hook"
cp -p $utils $out/nix-support/utils.sh
# Propagate the wrapped gcc so that if you install the wrapper, you get
# tools like gcov, the manpages, etc. as well (including for binutils
# and Glibc).
if test -z "$nativeTools"; then
echo $gcc $binutils $libc > $out/nix-support/propagated-user-env-packages
fi