This hopefully fixes intermittent initrd failures where udevd cannot
create a Unix domain socket:
machine# running udev...
machine# error getting socket: Address family not supported by protocol
machine# error initializing udev control socket
machine# error getting socket: Address family not supported by protocol
The "unix" kernel module is supposed to be loaded automatically, and
clearly that works most of the time, but maybe there is a race
somewhere. In any case, no sane person would run a kernel without Unix
domain sockets, so we may as well make it builtin.
http://hydra.nixos.org/build/30001448
This hopefully fixes intermittent test failures like
http://hydra.nixos.org/build/29962437
router# [ 240.128835] INFO: task mke2fs:99 blocked for more than 120 seconds.
router# [ 240.130135] Not tainted 3.18.25 #1-NixOS
router# [ 240.131110] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
assuming that these are caused by high load on the host.
... because we make it built-in by default.
I can't imagine anyone who wanted to purge this module from his/her system,
so let's keep it simple, at least for now.
Previously this barfed with:
updating GRUB 2 menu...
fileparse(): need a valid pathname at /nix/store/zldbbngl0f8g5iv4rslygxwp0dbg1624-install-grub.pl line 391.
warning: error(s) occured while switching to the new configuration
The most complex problems were from dealing with switches reverted in
the meantime (gcc5, gmp6, ncurses6).
It's likely that darwin is (still) broken nontrivially.
mmc_block and sdhci_acpi are both necessary for a Bay Trail Chromebook with an
internal eMMC drive. The sdhci_acpi module is detectable but I can not figure
out a way to check whether the mmc_block module is needed by just looking at
/sys/
Option aliases/deprecations can now be declared in any NixOS module,
not just in nixos/modules/rename.nix. This is more modular (since it
allows for example grub-related aliases to be declared in the grub
module), and allows aliases outside of NixOS (e.g. in NixOps modules).
The syntax is a bit funky. Ideally we'd have something like:
options = {
foo.bar.newOption = mkOption { ... };
foo.bar.oldOption = mkAliasOption [ "foo" "bar" "newOption" ];
};
but that's not possible because options cannot define values in
*other* options - you need to have a "config" for that. So instead we
have functions that return a *module*: mkRemovedOptionModule,
mkRenamedOptionModule and mkAliasOptionModule. These can be used via
"imports", e.g.
imports = [
(mkAliasOptionModule [ "foo" "bar" "oldOption" ] [ "foo" "bar" "newOption" ]);
];
As an added bonus, deprecation warnings now show the file name of the
offending module.
Fixes#10385.
- systemd puts all into one output now (except for man),
because I wasn't able to fix all systemd/udev refernces
for NixOS to work well
- libudev is now by default *copied* into another path,
which is what most packages will use as build input :-)
- pkgs.udev = [ libudev.out libudev.dev ]; because there are too many
references that just put `udev` into build inputs (to rewrite them all),
also this made "${udev}/foo" fail at *evaluation* time
so it's easier to catch and change to something more specific
This way the binary gets stripped & rpath-shrinked etc. as usual.
We'd seem to get a runtime reference to gcc otherwise.
TODO: Maybe we should be able to set e.g. 'dontUnpack = true;'
to make this more pretty.
Adding the configuration option 'systemd.generators' to
specify systemd system-generators. The option allows to
either add new system-generators to systemd, or to over-
ride or disable the system-generators provided by systemd.
Internally, the configuration option 'systemd.generators'
maps onto the 'environment.etc' configuration option.
Having a convenience wrapper around 'environment.etc' helps
to group the systemd system-generator configuration more
easily with other 'systemd...' configurations.
$d should be $sd, this causes resume from hibernate to fail if
resumeDevice is not explicitly set in config. Introduced in commit:
'stage-1: Shut up warnings about swap devices that don't exist yet'
(cherry picked from commit 2a31397f53)
$d should be $sd, this causes resume from hibernate to fail if
resumeDevice is not explicitly set in config. Introduced in commit:
'stage-1: Shut up warnings about swap devices that don't exist yet'
When using extlinux-conf-builder in a nix build using chroots, the
following error message could be seen:
/nix/store/XXX-extlinux-conf-builder.sh: line 121: cd: /nix/var/nix/profiles: No such file or directory
To avoid this, just skip the code path parsing /nix/var/nix/profiles
when $numGenerations (passed from the command line) is 0 (which is the
only legal value of $numGenerations in a nix build context).
Without a menu title, U-Boot's distro scripts just autoboot the first
entry by default.
When I initially wrote this, my board wasn't apparently running stock
U-Boot but had some local hacks saved in the U-Boot's environment
which made it always display the prompt.
When calling addEntry inside a subshell, the filesCopied array would
be updated only in the subshell's environment. This would only cause an
issue if no -g flag was passed to the script, causing no kernels
to be copied.
This fixes a failing assert in systemd-timesyncd (issue #5913) as it
expects the directory /run/systemd/netif/links/ to exist, and nothing in
NixOS currently creates it.
Also we get a net reduction in our code as rules for /run/utmp and
/var/log/journal are also provided by the same upstream file.
(cherry picked from commit a278a9224a)
This shuts up this error from dbus:
May 11 13:52:16 machine dbus-daemon[259]: Unknown username "systemd-network" in message bus configuration file
May 11 13:52:16 machine dbus-daemon[259]: Unknown username "systemd-resolve" in message bus configuration file
which happens because the D-Bus config for networkd/resolved is
enabled unconditionally, and we don't have an easy way to turn it off.
(cherry picked from commit f19b58fb6a)
Some filesystems like fat32 don't support symlinking and need to be
supported on /boot as an efi system partition. Instead of creating the symlink directly in boot, create the symlink in
a temporary directory which has to support symlinking.
This solves the problem that modprobe does not know about $MODULE_DIR
when run via sudo, and instead wrongly tries to read /lib/modules/:
$ sudo strace -efile modprobe foo |& grep modules
open("/lib/modules/3.14.37/modules.softdep", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib/modules/3.14.37/modules.dep.bin", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib/modules/3.14.37/modules.dep.bin", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib/modules/3.14.37/modules.alias.bin", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
Without this patch, one would have to use sudo -E (preserves environment
vars). But that option is reserved for sudo users with extra rights
(SETENV), so it's not a solution.
environment.sessionVariables are set by PAM, so they are included in the
environment used by sudo.
This fixes a failing assert in systemd-timesyncd (issue #5913) as it
expects the directory /run/systemd/netif/links/ to exist, and nothing in
NixOS currently creates it.
Also we get a net reduction in our code as rules for /run/utmp and
/var/log/journal are also provided by the same upstream file.
This module generates a /boot/extlinux/extlinux.conf bootloader
configuration file that is supported by e.g. U-Boot:
http://git.denx.de/?p=u-boot.git;a=blob;f=doc/README.distro;hb=refs/heads/master
With this, all ARM boards supported by U-Boot can be booted in a common
way (a single boot file generator, all boards booting via initrd like
x86) and with same boot menu functionality as GRUB has.
-- sample extlinux.conf file --
# Generated file, all changes will be lost on nixos-rebuild!
# Change this to e.g. nixos-42 to temporarily boot to an older configuration.
DEFAULT nixos-default
TIMEOUT 50
LABEL nixos-default
MENU LABEL NixOS - Default
LINUX ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-zImage
INITRD ../nixos/0ss2zs8sb6d1qn4gblxpwlxkfjsgs5f0-initrd-initrd
FDTDIR ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-dtbs
APPEND systemConfig=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M init=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M/init loglevel=8 console=ttyS0,115200n8 drm.debug=0xf
LABEL nixos-71
MENU LABEL NixOS - Configuration 71 (2015-05-17 21:32 - 15.06.git.0b7a7a6M)
LINUX ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-zImage
INITRD ../nixos/0ss2zs8sb6d1qn4gblxpwlxkfjsgs5f0-initrd-initrd
FDTDIR ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-dtbs
APPEND systemConfig=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M init=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M/init loglevel=8 console=ttyS0,115200n8 drm.debug=0xf
With systemd 219, this is fine because systemd will cause the new
journald to re-use the file descriptors of the old one. So existing
connections to the journal are unaffected.
This shuts up this error from dbus:
May 11 13:52:16 machine dbus-daemon[259]: Unknown username "systemd-network" in message bus configuration file
May 11 13:52:16 machine dbus-daemon[259]: Unknown username "systemd-resolve" in message bus configuration file
which happens because the D-Bus config for networkd/resolved is
enabled unconditionally, and we don't have an easy way to turn it off.
It boots, but some things still don't work:
1) Installation of DTBs
2) Boot of initrd
Booting still needs a proper config.txt in /boot, which could probably be
managed by NixOS.
During the refactor of the networkd stuff in f8dbe5f, a lot of the
options are now needed by systemd.nix as well as networkd.nix but
weren't moved by that commit as well.
For now, this fixes all networkd VM tests except for the macvlan one and
thus it should fix#7505 for at least DHCP-based configuration.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
In f8dbe5f, the default value for networking unit "enabled" option
suddenly flipped to false. I have no idea of whether this happened by
accident, but I'm setting it to true again, because it essentially
breaks systemd networking support and we have systemd.network.enable to
have a "turn the world off" switch.
And of course, because the mentioned commit obviously wasn't done with
even a run of the simplest run of one of the network VM tests, we now
get an evaluation error if we switch useNetworkd to true.
Fixes the core issue of #7505.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Otherwise, the enabled -> disabled transition won't be handled
correctly (switch-to-configuration currently assumes that if a unit is
running and exists, it should be restarted).
The PID 1 shell is executed as the last command in a sh invocation. Some
shells implicitly use exec for that, but the current busybox ash does not,
so the shell gets a wrong PID. Spell out the exec.
When gummiboot.timeout == null, the menu will still be skipped.
When gummiboot.timeout == 0, the menu will also be skipped.
The only way to show the menu 'indefinitely' is to show it a long time.
