The Intel SGX DCAP driver makes the SGX application enclave device and
the SGX provisioning enclave available below the path `/dev/sgx/`. Since
Linux 5.11, a derivation of the DCAP driver is part of the kernel and
available through the X86_SGX config option; NixOS enables this option
by default.
In contrast to the out-of-tree DCAP driver, the in-tree SGX driver uses
a flat hierarchy for the SGX devices resulting in the paths
`/dev/sgx_enclave` for the application enclave device and
`/dev/sgx_provison` for the provisioning enclave device.
As of this commit, even the latest version of the Intel SGX PSW
libraries still tries to open the (legacy) DCAP paths only. This means
that SGX software currently cannot find the required SGX devices even if
the system actually supports SGX through the in-tree driver. Intel wants
to change this behavior in an upcoming release of intel/linux-sgx.
Having said that, SGX software assuming the SGX devices below
`/dev/sgx/` will prevail. Therefore, this commit introduces the NixOS
configuration option `hardware.cpu.intel.sgx.enableDcapCompat` which
creates the necessary symlinks to support existing SGX software. The
option defaults to true as it is currently the only way to support SGX
software. Also, enabling the SGX AESM service enables the option.
The permissions of the devices `/dev/sgx_enclave` and
`/dev/sgx_provison` remain the same, i.e., are not affected regardless
of having the new option enabled or not.
This option makes the complete netdata configuration directory available for
modification. The default configuration is merged with changes
defined in the configDir option.
Co-authored-by: Michael Raitza <spacefrogg-github@meterriblecrew.net>
During working on #150837 I discovered that `google-oslogin` test
started failing, and so did some of my development machines. Turns out
it was because nscd doesn't start by default; rather it's wanted by
NSS lookup targets, which are not always fired up.
To quote from section on systemd.special(7) on `nss-user-lookup.target`:
> All services which provide parts of the user/group database should be
> ordered before this target, and pull it in.
Following this advice and comparing our unit to official `sssd.service`
unit (which is a similar service), we now pull NSS lookup targets from
the service, while starting it with `multi-user.target`.
This is a useful utility for monitoring network performance over time
using a combination of MTR and Prometheus. Also adding a service definition.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Alternative solution to PR #152443.
This fixes authentication failures to WPA3 networks (issue #151729)
by enabling protected management frames.
Note: old client without 802.11w support will still fail.
When startWhenNeeded is enabled, a brute force attack on sshd will cause
systemd to shut down the socket, locking out all SSH access to the machine.
Setting TriggerLimitIntervalSec to 0 disables this behavior.
In https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/merge_requests/153
the user target names for GSD components has been renamed for example
from `gsd-a11y-settings.target` to `org.gnome.SettingsDaemon.A11ySettings.target`,
and nowadays `gsd-*.target` are just symbolic links of `/dev/null` and will be
removed in the future.
At the same time, as mentioned in d27212d466,
we are adding `systemd.user.targets.<name>.wants` stuff here only because
systemd.packages doesn't pick the .wants directories. Nowadays those GSD components
are managed in `/etc/systemd/user/gnome-session@gnome.target.d/gnome.session.conf`
so it should be safe to remove them.
In this commit we also try to pick up those new .wants directories, see also
https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/blob/41.0/plugins/meson.build#L57
Result of `cd /nix/store/iqzy2a6wn9bq9hqx7pqx0a153s5xlnwp-gnome-settings-daemon-41.0; find | grep wants`:
```
./share/systemd/user/gnome-session-x11-services-ready.target.wants
./share/systemd/user/gnome-session-x11-services-ready.target.wants/org.gnome.SettingsDaemon.XSettings.service
./share/systemd/user/gnome-session-x11-services.target.wants
./share/systemd/user/gnome-session-x11-services.target.wants/org.gnome.SettingsDaemon.XSettings.service
```
Result of `cd /nix/store/armzljlnsvc1gn0nq0bncb9lf8fy32zy-gnome-settings-daemon-3.34.0; find | grep wants`:
```
./lib/systemd/user/gnome-session-initialized.target.wants
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-a11y-settings.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-color.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-datetime.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-power.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-housekeeping.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-keyboard.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-media-keys.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-screensaver-proxy.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-sharing.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-sound.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-smartcard.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-wacom.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-print-notifications.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-rfkill.target
./lib/systemd/user/gnome-session-initialized.target.wants/gsd-wwan.target
./lib/systemd/user/gnome-session-x11-services.target.wants
./lib/systemd/user/gnome-session-x11-services.target.wants/gsd-xsettings.target
```
This never configured where SNI should log to, as it's up to the user to
provide the full sniproxy config (which can be configured to log to a
file).
This option only produced a ExecStartPre script that created the folder.
Let's use LogsDirectory to create it. In case users want to use another
directory for logs, they can override LogsDirectory or set their own
ExecStartPre script.
The systemd syntax is suprising to me, but I suppose it's worth being
compatible as people might be sharing it with other modules.
Our regexp is lenient on IPv6 address part, so this is actually
backwards compatible (i.e. you can put the scope at either place).
3a1e1f0624 adds a poststart script that
checks if ES successfully started by curling the HTTP endpoint. On nodes with a lot of data or slower disks,
this might take longer than the default systemd startup timeout of 90 seconds.
dhcpcd does not run properly with some of the hardened system mallocs
that are currently available. assert when an incompatible configuration
is detected, as a switch into such a config from eg auto-update can take
hosts offline.
tracker looks in its directory tree for executable files
to make available as subcommands. Users expect to find subcommands
from tracker-miners package but that fails as they are in different
tree. We also cannot change the lookup path since tracker-miners
also depends on a library from tracker package.
Until we can break the dependency cycle on package level:
tracker -> tracker-miners -> tracker-sparql (tracker)
we need to work around it. I chose to set an environment
variable that overrides the subcommands lookup to a tree
symlinking files from both packages in GNOME NixOS module.
https://gitlab.gnome.org/GNOME/tracker/-/issues/341
Fixes: https://github.com/NixOS/nixpkgs/issues/153378
When `privateRepos = true`, the service will not start if the `.htpasswd` does not exist.
Use `systemd-tmpfiles` to autocreate an (empty) file to ensure the service can boot
before actual `htpasswd` contents are registered.
This is safe as restic-rest-server will deny all entry if the file is empty.
link to search.nixos.org instead of pulling package metadata out of pkgs. this
lets us cache docs of a few more modules and provides easier access to package
info from the HTML manual, but makes the manpage slightly less useful since
package description are no longer rendered.
most modules can be evaluated for their documentation in a very
restricted environment that doesn't include all of nixpkgs. this
evaluation can then be cached and reused for subsequent builds, merging
only documentation that has changed into the cached set. since nixos
ships with a large number of modules of which only a few are used in any
given config this can save evaluation a huge percentage of nixos
options available in any given config.
in tests of this caching, despite having to copy most of nixos/, saves
about 80% of the time needed to build the system manual, or about two
second on the machine used for testing. build time for a full system
config shrank from 9.4s to 7.4s, while turning documentation off
entirely shortened the build to 7.1s.
Sometimes it is preferable to configure forwarding only for bind
instead of relying on direct lookups.
This patch makes it possible to configure the forward setting to
either "first" (the default) or "only".
One use case for Mattermost configuration is doing a "mostly
mutable" configuration where NixOS module options take priority
over Mattermost's config JSON.
Add a preferNixConfig option that prefers configured Nix options
over what's configured in Mattermost config if mutableConfig is set.
Remove the reliance on readFile (it's flake incompatible) and use
jq instead.
Merge Mattermost configs together on Mattermost startup, depending
on configured module options.
Write tests for mutable, mostly mutable, and immutable configurations.
Before this fix, if the listenAddress is set to something else than 127.0.0.1,
the service fails to detect that Elasticsearch has properly started and stop.
this set almost certainly shouldn't be touched by users, nor listed in
the manual. make it internal and use it only through the option path to
make clear that this should not be modified.
Other services such as minecraft-server and plex allow configuration of
the dataDir option, allowing the files stored by each service to be in a
custom location.
Co-authored-by: Aaron Andersen <aaron@fosslib.net>
Does not set MemoryDenyWriteExecute as OpenJDK need to mark memory page as
executable. Does not set ProcSubset as /proc/cpuinfo and /proc/meminfo
are needed.
This commit introduces `services.adguardhome.settings` and
`services.adguardhome.mutableSettings`.
The first option allows declarative configuration of
AdGuard Home, while the second one controls whether changes
made in the web interface are kept between service restarts.
Co-authored-by: Aaron Andersen <aaron@fosslib.net>
It breaks something inside of influxdb2, which results in flurry of errors like these:
> ts=2021-12-21T18:19:35.513910Z lvl=info msg="Write failed" log_id=0YZYwvV0000 service=storage-engine service=write shard=50 error="[shard 50] unlinkat ./L1-00000055.tsi: read-only file system"
I believe this is somehow caused by a mount namespace that systemd creates for
the service, but I didn't investigate this deeper.
Fix a typo in the kea-dhcp-ddns-server unit definition, and add a
KEA_LOCKFILE_DIR environment variable without which kea daemons try to
access a lockfile under /var/run/kea path, which is prevented by
systemd's ProtectSystem (or one of the other Protect*) mechanism.
kea-dhcp-ddns-server doesn't react to updates from dhcp4 server at all
without it.
- Added defaultText for all inheritable options.
- Add docs on using new defaults option to configure
DNS validation for all domains.
- Update DNS docs to show using a service to configure
rfc2136 instead of manual steps.
Allows configuring many default settings for certificates,
all of which can still be overridden on a per-cert basis.
Some options have been moved into .defaults from security.acme,
namely email, server, validMinDays and renewInterval. These
changes will not break existing configurations thanks to
mkChangedOptionModule.
With this, it is also now possible to configure DNS-01 with
web servers whose virtualHosts utilise enableACME. The only
requirement is you set `acmeRoot = null` for each vhost.
The test suite has been revamped to cover these additions
and also to generally make it easier to maintain. Test config
for apache and nginx has been fully standardised, and it
is now much easier to add a new web server if it follows
the same configuration patterns as those two. I have also
optimised the use of switch-to-configuration which should
speed up testing.
One of the valid values for the fan speed is "level disengaged",
however, it is represented as "level disengage" and does not match
what thinkfan expects.
When accessing the Audit log, I get an HTTP 502 when the frontend
requests `/audit` and I get the following error in my `nginx`-log:
Dec 20 22:12:48 ldap nginx[336]: 2021/12/20 22:12:48 [error] 336#336: *8421 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 10.237.0.1, server: _, request: "GET /audit/?action=**&action_detail=**&administrator=**&client=**&date=**&duration=**&info=**&page=1&page_size=10&policies=**&privacyidea_server=**&realm=**&resolver=**&serial=**&sortorder=desc&startdate=**&success=**&tokentype=**&user=** HTTP/1.1", upstream: "uwsgi://unix:/run/privacyidea/socket:", host: "ldap.ist.nicht-so.sexy", referrer: "https://ldap.ist.nicht-so.sexy/"
This is because of an "invalid request block size"-error according to
`journalctl -u privacyidea.service`:
Dec 20 22:12:48 ldap uwsgi[10721]: invalid request block size: 4245 (max 4096)...skip
Increasing the buffer to 8192 fixes the problem for me.
openFirewall is the much more common name for an option with this
effect. since the default was `true` all along, renaming it doesn't hurt
much and only improves consistency with other modules.
- Add the migrations directory to the package
- Add postgres support to the package
- Add a service for powerdns-admin
Co-authored-by: Zhaofeng Li <hello@zhaofeng.li>
Snapserver expects the arguments `--tcp.bind_to_address` and
`--http.bind_to_address` instead of the `--tcp.address` (and http
equivalent) versions.
This caused the process to listen on `0.0.0.0` (for TCP and HTTP
sockets) regardless of the configuration value. It also never listend on
the IPv6 address `::` as our module system made the user believe.
This commit fixes the above issue and ensures that (at least for the TCP
socket) that our default `::` does indeed allow connections via IPv6
(to localhost aka ::1).
* elk7: 7.11.1 -> 7.16.1
* nixosTests.elk: Improve reliability and compatibility with ELK 7.x
- Use comparisons in jq instead of grepping
- Match for `.hits.total.value` if version >= 7, otherwise it always
passes
- Make curl fail if requests fails
* nixos/filebeat: Add initial module and test
Filebeat is an open source file harvester, mostly used to fetch logs
files and feed them into logstash.
This module can be used instead of journalbeat if used with
`filebeat7` and configured with the `journald` input.
* python3Packages.parsedmarc.tests: Fix breakage
- Don't use the deprecated elasticsearch7-oss package
- Improve jq query robustness and add tracing
* rl-2205: Note the addition of the filebeat service
* elk6: 6.8.3 -> 6.8.21
The latest version includes a fix for CVE-2021-44228.
* nixos/journalbeat: Add a loose dependency on elasticsearch
Avoid unnecssary back-off when elasticsearch is running on the same
host.
