This reverts commit 7f1e728606.
This would have been nice if we had had it from the start, but now it
just breaks things for existing users. Maybe we can add it conditionally
when new postgres versions come out.
Signed-off-by: Shea Levy <shea@shealevy.com>
This reverts commit 1e543984bc.
This would have been nice if we had had it from the start, but now it
just breaks things for existing users. Maybe we can add it conditionally
when new postgres versions come out.
Signed-off-by: Shea Levy <shea@shealevy.com>
desktop-manager is a bit misleading in this case as there is no
session yet and most apps are still missing. This can eventually
grow further once more e17 apps get packaged for nix.
However, for now, I need to initialize some e17 dbus services to
have the "terminology" terminal emulator provide gfx previews.
The user should specify which major version to use
(e.g. "services.postgresql.package = pkgs.postgresql92"). We can't
really provide a sensible default, because such a default would have
to be updated from time to time, and there is no automated upgrade
procedure. So leave upgrading to the user.
Enabling udisks2 allows gvfs (which should be built with udisks support) to
perform mount/unmount operations on removable drives. It affects Thunar and
probably other Gtk-based file managers.
Gvfs doesn't supports earlier versions of udisks.
As @edolstra pointed out, this behavior is not equivalent to what we had
before as the kernel command line parameter won't take effect until the
next boot. Probably it's not likely that someone will make this change
and then add a network card before rebooting, but might as well support
that since we can.
This reverts commit f7563698df.
Signed-off-by: Shea Levy <shea@shealevy.com>
Sometimes nscd starts up before a /etc/resolv.conf file has been written, and
apparently triggering a cache flush (reload) is not good enough to make it
recover from that problem. To remedy the issue, we restart the service instead.
See <https://github.com/NixOS/nixos/issues/34> for further details.
Using /etc/lighttpd.conf "hides" the config file from NixOS so that it
will not automatically restart the service when its config file changes.
So don't do that.
I think it's nice that it first asks the usual password, and then offers the
otpw one if enabled. That enables dovecot to show the last pam prompt.
I also add the dovecot option for that.
Previously we synced just before calling switch-to-configuration.
That prevents corruption of the Nix store, but it can leave the boot
loader configuration and kernel files in /boot corrupted. So do the
sync after installing the boot loader.
Usually timers.target is pulled in by basic.target, but we don't
restart basic.target. So timers.target wouldn't be started when
coming from an older systemd.
Now that nixUnstable supports remounting in the "/nix/store is a
mountpoint" case, this is no longer necessary.
This reverts commit f1d48aec43.
Signed-off-by: Shea Levy <shea@shealevy.com>
More specifically, this removes services.pulseaudio and adds the option
hardware.pulseaudio.systemWide which defaults to false but can be used to turn
on the system-wide PulseAudio server (previously defined in
services.pulseaudio). Since the two PulseAudio modes are mutually exclusive
anyway (maybe not strictly true, but I don't think is a good idea combining
them) its nicer to be able to reuse server and ALSA configuration between them.
Also the system-wide PulseAudio service has been adjusted to systemd, and a few
things has been fixed (there was no alsa.conf before, for example).
The bottomline is that people that was using hardware.pulseaudio before should
be able to keep doing it in exactly the same way, and people that used
services.pulseaudio must switch over to hardware.pulseaudio.systemWide instead.
This makes it so multiple definitions are merged by adding a newline
between each entry, to avoid the need to add a newline to the end of
every definition of extraModprobeConfig. See #119 for an example of an
issue this has caused.
Signed-off-by: Shea Levy <shea@shealevy.com>
The smartd used to expect a list of devices to monitor. After this patch, it
expects a list of attribute sets, which may have two attributes:
- device: path to the device (required)
- options: smartd options to apply to this particular device (optional)
A concrete example configuration would be:
services.smartd = {
enable = true;
devices = [ { device = "/dev/sda"; } { device = "/dev/sdb"; options = "-d sat"; } ];
};
Furthermore, the config option 'deviceOpts' can be used to configure options
that are applied to *every* device.
Enable it with
services.transmission.enable = true;
and optionally configure it
services.transmission.settings =
{
download-dir = "/srv/torrents/";
incomplete-dir = "/srv/torrents/.incomplete/";
incomplete-dir-enabled = true;
rpc-whitelist = "127.0.0.1,192.168.*.*";
# for users in group "transmission" to have access to torrents
umask = 2;
};
The above settings are written/merged into settings.json each time the
service is about to start.
In principle this could work, but the current remount logic in nix fails
to remount mountpoints that are root in their own filesystem (as would
be the case with bind-mounting a mountpoint over itself). nixos/nix#98
is aimed at fixing this.
Signed-off-by: Shea Levy <shea@shealevy.com>
Newer kernels (since torvalds/linux@abb139e75c) try to
read firmware directly from the filesystem before falling back to a
userspace helper (udev) if firmware cannot be found (in even newer
kernels, the fallback path can be disabled altogether). By default, only
certain paths in /lib/firmware* are searched, so this was initially not
helpful for NixOS.
Since torvalds/linux@2760284206 (which,
based on the commit message, was implemented just for NixOS, go us!),
though, an extra path can be dynamically prepended to the search path.
So do that, in three ways:
1. Pass a kernel command line option in case the module is built-in
2. Add a line to modprobe.conf in case the module isn't yet loaded by
activation-time
3. Add an activation script to set the option in /sys in case the module
is already loaded by activation-time.
man logind.conf clearly states that the header is [Login] (no 'd').
Without this fix services.logind.extraConfig does not take effect
because logind ignores the invalidly named section.
So that we can customize systemd-logind in configuration.nix.
Example:
services.logind.extraConfig = "HandleLidSwitch=ignore";
See man logind.conf for available options.
xf86videovmware[1].
Adds "vmware" to list of default options of
services.xerver.videoDrivers.
new default:
[ "ati" "cirrus" "intel" "vesa" "vmware" ]
old default:
[ "ati" "cirrus" "intel" "vesa" ]
[1] Pull request for xf86videovmware found at
https://github.com/NixOS/nixpkgs/pull/338.
The mongodb service runs as user mongodb, and therefore
the preStart-script has no permissions to set up mongodb
directories. This is solved by adding an initialisation
service that runs as root and just sets up the required
directories.
This reverts commit 2802538dc2. The idea
was good, but unfortunately $GDFONTPATH has a different format, i.e.
programs that use this variable don't descend into the directories
listed here like fontconfig does, so we cannot use the same values for
both settings.
Set the environment variable GDFONTPATH to the list of directories where fonts
are expected to be installed. This is search path is used by same GD-based
applications, such as Gnuplot.
Alternatively, we could rely on fontconfig to achieve the same thing, i.e. by
running
for n in $(fc-list | sed -r -e 's|^([^:]+):.*$|\1|'); do echo $(dirname "$n"); done | sort | uniq
to get that list at run-time, but the static approach feels more deterministic.
This provides a more convenient syntax and allows easier overriding.
For example,
environment.etc = singleton
{ target = "vconsole.conf";
source = vconsoleConf;
};
can now be written as
environment.etc."vconsole.conf".source = vconsoleConf;
Adding support for the kind of bootloader in raspberrypi. Disable grub,
disable generationsDir, enable boot.loader.raspberrypi.
Usual layout expected: /boot being the first vfat the board reads blobs from.
If the user tries to run a program that doesn't exist from Bash, the
program name is looked up in a database that maps to Nix package
names. If it is found, we print out a message like:
$ pdflatex
The program ‘pdflatex’ is currently not installed. It is provided by
several packages. You can install it by typing one of the following:
nix-env -i tetex
nix-env -i texlive-core
If the environment variable $NIX_AUTO_INSTALL is set, the command is
installed and executed automatically:
$ hello --version
The program ‘hello’ is currently not installed. It is provided by
the package ‘hello’, which I will now install for you.
installing `hello-2.8'
hello (GNU hello) 2.8
Copyright (C) 2011 Free Software Foundation, Inc. ...
To use this, you must currently manually put the SQLite programs
database in /var/lib/nixos/programs.sqlite. In the future, this file
should be provided as part of the NixOS channel so it gets updated
automatically. To get a test version:
$ curl http://nixos.org/~eelco/programs.sqlite.xz | xz -d > /var/lib/nixos/programs.sqlite
This reverts commit 683100666d.
Seems somebody (systemd? the kernel?) gets confused at power
events and remounts the filesystem containing /nix/store as
read-only.
Commit 37b56574e2 revealed that the code
to get regInfo from /proc/cmdline was broken. It only happened to
work because the kernel passes the command line to stage 1 through the
environment, so $regInfo was set anyway.
