0d7cd66652 broke validation for hashes with options
such as those generated with `mkpasswd --method=sha-512 --rounds=1000000`:
$6$rounds=1000000$xpzZ6Rfg873gZnDY$RxS7lpVnohfDrrKG3lt9UFHED1KoiPGzH7zQv/HzwalZepo/IfFtxw05ap25duEJSKYhC14.Fn9eXszEpWVtF.
This fixes it.
This commit adds a derivation `gcc-stageCompare` to
`pkgs/test/stdenv/default.nix`.
It is important to always build this derivation whenever building
`stdenv`! Because we are using a Nix-driven bootstrap instead of
gcc's built-in `--enable-bootstrap`, the `gcc` derivation no longer
performs the post-self-compilation sanity check. You must build
this derivation in order to perform that sanity check.
The major benefit of this new approach is that the sanity check
(which involves a third compilation of gcc) can be performed
*concurrently* with all packages that depend on `stdenv`, rather
than serially. Since `stdenv` has very little derivation-level
parallelism it cannot take advantage of more than one or perhaps two
builders. If you have three or more builders this commit will
reduce the time-to-rebuild-stdenv by around 20% (one of three gcc
rebuilds is removed from the critical path, and stdenv's build time
is dominated by roughly 3*gcc + 1*binutils + 1*bison-test-suite).
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
Make sure that JIT is actually available when using
services.postgresql = {
enable = true;
enableJIT = true;
package = pkgs.postgresql_15;
};
The current behavior is counter-intuitive because the docs state that
`enableJIT = true;` is sufficient even though it wasn't in that case
because the declared package doesn't have the LLVM dependency.
Fixed by using `package.withJIT` if `enableJIT = true;` and
`package.jitSupport` is `false`.
Also updated the postgresql-jit test to test for that case.
This is useful if your postgresql version is dependant on
`system.stateVersion` and not pinned down manually. Then it's not
necessary to find out which version exactly is in use and define
`package` manually, but just stay with what NixOS provides as default:
$ nix-instantiate -A postgresql
/nix/store/82fzmb77mz2b787dgj7mn4a8i4f6l6sn-postgresql-14.7.drv
$ nix-instantiate -A postgresql_jit
/nix/store/qsjkb72fcrrfpsszrwbsi9q9wgp39m50-postgresql-14.7.drv
$ nix-instantiate -A postgresql.withJIT
/nix/store/qsjkb72fcrrfpsszrwbsi9q9wgp39m50-postgresql-14.7.drv
$ nix-instantiate -A postgresql.withJIT.withoutJIT
/nix/store/82fzmb77mz2b787dgj7mn4a8i4f6l6sn-postgresql-14.7.drv
I.e. you can use postgresql with JIT (for complex queries only[1]) like
this:
services.postgresql = {
enable = true;
enableJIT = true;
};
Performing a new override instead of re-using the `_jit`-variants for
that has the nice property that overlays for the original package apply
to the JIT-enabled variant, i.e.
with import ./. {
overlays = [
(self: super: {
postgresql = super.postgresql.overrideAttrs (_: { fnord = "snens"; });
})
];
};
postgresql.withJIT.fnord
still gives the string `snens` whereas `postgresql_jit` doesn't have the
attribute `fnord` in its derivation.
[1] https://www.postgresql.org/docs/current/runtime-config-query.html#GUC-JIT-ABOVE-COST
Closes#150801
Note: I decided against resuming directly on #150801 because the
conflict was too big (and resolving it seemed too error-prone to me).
Also the `this`-refactoring could be done in an easier manner, i.e. by
exposing JIT attributes with the correct configuration. More on that
below.
This patch creates variants of the `postgresql*`-packages with JIT[1]
support. Please note that a lot of the work was derived from previous
patches filed by other contributors, namely dasJ, andir and abbradar,
hence the co-authored-by tags below.
Effectively, the following things have changed:
* For JIT variants an LLVM-backed stdenv with clang is now used as
suggested by dasJ[2]. We need LLVM and CLang[3] anyways to build the
JIT-part, so no need to mix this up with GCC's stdenv. Also, using the
`dev`-output of LLVM and clang's stdenv for building (and adding llvm
libs as build-inputs) seems more cross friendly to me (which will
become useful when cross-building for JIT-variants will actually be
supported).
* Plugins inherit the build flags from the Makefiles in
`$out/lib/pgxs/src` (e.g. `-Werror=unguarded-availability-new`). Since
some of the flags are clang-specific (and stem from the use of the
CLang stdenv) and don't work on gcc, the stdenv of `pkgs.postgresql`
is passed to the plugins. I.e., plugins for non-JIT variants are built
with a gcc stdenv on Linux and plugins for JIT variants with a clang
stdenv.
Since `plv8` hard-codes `gcc` as `$CC` in its Makefile[4], I marked it
as broken for JIT-variants of postgresql only.
* Added a test-matrix to confirm that JIT works fine on each
`pkgs.postgresql_*_jit` (thanks Andi for the original test in
#124804!).
* For each postgresql version, a new attribute
`postgresql_<version>_jit` (and a corresponding
`postgresqlPackages<version>JitPackages`) are now exposed for better
discoverability and prebuilt artifacts in the binary cache.
* In #150801 the `this`-argument was replaced by an internal recursion.
I decided against this approach because it'd blow up the diff even
more which makes the readability way harder and also harder to revert
this if necessary.
Instead, it is made sure that `this` always points to the correct
variant of `postgresql` and re-using that in an additional
`.override {}`-expression is trivial because the JIT-variant is
exposed in `all-packages.nix`.
* I think the changes are sufficiently big to actually add myself as
maintainer here.
* Added `libxcrypt` to `buildInputs` for versions <v13. While
building things with an LLVM stdenv, these versions complained that
the extern `crypt()` symbol can't be found. Not sure what this is
exactly about, but since we want to switch to libxcrypt for `crypt()`
usage anyways[5] I decided to add it. For >=13 it's not relevant
anymore anyways[6].
* JIT support doesn't work with cross-compilation. It is attempted to
build LLVM-bytecode (`%.bc` is the corresponding `make(1)`-rule) for
each sub-directory in `backend/` for the JIT apparently, but with a
$(CLANG) that can produce binaries for the build, not the host-platform.
I managed to get a cross-build with JIT support working with
`depsBuildBuild = [ llvmPackages.clang ] ++ buildInputs`, but
considering that the resulting LLVM IR isn't platform-independent this
doesn't give you much. In fact, I tried to test the result in a VM-test,
but as soon as JIT was used to optimize a query, postgres would
coredump with `Illegal instruction`.
A common concern of the original approach - with llvm as build input -
was the massive increase of closure size. With the new approach of using
the LLVM stdenv directly and patching out references to the clang drv in
`$out` the effective closure size changes are:
$ nix path-info -Sh $(nix-build -A postgresql_14)
/nix/store/kssxxqycwa3c7kmwmykwxqvspxxa6r1w-postgresql-14.7 306.4M
$ nix path-info -Sh $(nix-build -A postgresql_14_jit)
/nix/store/xc7qmgqrn4h5yr4vmdwy56gs4bmja9ym-postgresql-14.7 689.2M
Most of the increase in closure-size stems from the `lib`-output of
LLVM
$ nix path-info -Sh /nix/store/5r97sbs5j6mw7qnbg8nhnq1gad9973ap-llvm-11.1.0-lib
/nix/store/5r97sbs5j6mw7qnbg8nhnq1gad9973ap-llvm-11.1.0-lib 349.8M
which is why this shouldn't be enabled by default.
While this is quite much because of LLVM, it's still a massive
improvement over the simple approach of adding llvm/clang as
build-inputs and building with `--with-llvm`:
$ nix path-info -Sh $(nix-build -E '
with import ./. {};
postgresql.overrideAttrs ({ configureFlags ? [], buildInputs ? [], ... }: {
configureFlags = configureFlags ++ [ "--with-llvm" ];
buildInputs = buildInputs ++ [ llvm clang ];
})' -j0)
/nix/store/i3bd2r21c6c3428xb4gavjnplfqxn27p-postgresql-14.7 1.6G
Co-authored-by: Andreas Rammhold <andreas@rammhold.de>
Co-authored-by: Janne Heß <janne@hess.ooo>
Co-authored-by: Nikolay Amiantov <ab@fmap.me>
[1] https://www.postgresql.org/docs/current/jit-reason.html
[2] https://github.com/NixOS/nixpkgs/pull/124804#issuecomment-864616931
& https://github.com/NixOS/nixpkgs/pull/150801#issuecomment-1467868321
[3] This fails with the following error otherwise:
```
configure: error: clang not found, but required when compiling --with-llvm, specify with CLANG=
```
[4] https://github.com/plv8/plv8/blob/v3.1.5/Makefile#L14
[5] https://github.com/NixOS/nixpkgs/pull/181764
[6] c45643d618
A change made in #166308 added `networking.resolvconf.package` to the
`environment.systemPackages` list, so it is installed as part of the
system image. However it does so unconditionally, meaning that even if
the `config.networking.resolvconf.enable` is set to false the package
listed in the `networking.resolvconf.package` would still be intalled.
This change makes it so the package installation will depend on the
status of the `config.networking.resolvconf.enable` option instead.
`bridge` is used by iproute2, so using this name for protonmail-bridge
made it very likely to produce a name "conflict".
Also `bridge` is used in the Makefile by upstream project Makefile but
it apparently is renamed later on when packaged in rpm/deb so even for
coherence purposes it does make sense to revert it back to the name
`protonmail-bridge` that were previously being used.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
This adds an option `services.mattermost.environmentFile`, intended to be
useful especially when `services.mattermost.mutableConfig` is set to `false`.
Since all mattermost configuration options can also be set by environment
variables, this allows managing secret configuration values in a declarative
manner without placing them in the nix store.
Before, setting {option}`programs.steam.package` would result in a steam without
the {option}`hardware.opengl.package`, {option}`hardware.opengl.extraPackages`
etc. You had to manually add them yourself.
Additionally, overlaying `steam = prev.steam.override { extraLibraries = [ ... ]; }`
resulted in those extra libraries not actually being put into the fhsenv because
they'd be fully overridden by the option's default.
Now, the user can supply a custom steam to {option}`programs.steam.package` with
its own list of extraLibraries which will not be overridden and overlays work as
expected too.
Upstream did so in https://github.com/nextcloud/server/pull/36689 and
Nextcloud now complains that
The "X-Robots-Tag" HTTP header is not set to "noindex, nofollow".
This is a potential security or privacy risk, as it is recommended
to adjust this setting accordingly.
This is not needed anymore because the version is EOL for almost a year
now and we don't even have the packages anymore, only the attributes for
compatibility for upgrades from older NixOS versions.
This should fix the flakyness of the test.
Forcefully killing the consul process can lead to
a broken `/var/lib/consul/node-id` file, which
will prevent consul from starting on that node again.
See https://github.com/hashicorp/consul/issues/3489
So instead of crashing the whole node, which leads to
this corruption from time to time, we kill the
networking instead, preventing any cluster
communication and then cleanly stop consul.
What the code was trying to do was helpfully add a directory and
extension if none were specified, but it did this by checking whether
the filename was composed of a very limited character set that didn't
even include dashes.
With this change, the intention of the code is clearer, and I can put
dashes in my screenshot names.
The keyd package already exists, but without a systemd service.
Keyd requires write access to /var/run to create its socket. Currently
the directory it uses can be changed with an environment variable, but
the keyd repo state suggests that this may turn into a compile-time
option. with that set, and some supplementary groups added, we can run
the service under DynamicUser.
Co-authored-by: pennae <82953136+pennae@users.noreply.github.com>
