We now generate a qcow2 image to prevent hitting Hydra's output size
limit. Also updated /root/user-data -> /etc/ec2-metadata/user-data.
http://hydra.nixos.org/build/33843133
These two steps seem to fail intermittently with exit code 1. It isn't clear to me why, or what the issue is. Adding the `--verbose` option, hoping to capture some debugging information which might aid stabilization. Also: I was unable to replicate the failure locally.
Assigning the channelMap by the function attrset argument at the
top-level of the test expression file may reference a different
architecture than we need for the tests.
So if we get the pkgs attribute by auto-calling, this will lead to test
failure because we have a different architecture for the test than for
the browser.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This has been the case before e45c211, but it turns out that it's very
useful to override the channel packages so we can run tests with
different Chromium build options.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The docker service is socket activated by default; thus,
`waitForUnit("docker.service")` before any docker command causes the
unit test to time out.
Instead, do `waitForUnit("sockets.target")` to ensure that sockets are
setup before running docker commands.
As @bobvanderlinden suggests in #13585:
"Looks like that cleans things up quite a bit! Just one aesthetics note,
the boot tests could now be renamed from boot.bootBiosCdrom to
boot.biosCdrom in nixos/tests/boot.nix:L33.
That makes them more consistent with the other tests."
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This makes it easier to test just a specific channel rather than to
force testing all builds down the users/testers throat. Especially this
makes it easier to test NixOS channel upgrades only against the Chromium
stable channel instead of just removing the beta/dev channels from the
tests entirely (as done in 69ec09f38a).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
So far the networking test expression only generated a single test
depending on the passed "test" attribute. This makes it difficult to
autodiscover the subtests with our shiny new callSubTests function.
This change essentially doesn't change the behaviour of the subtests but
rather exposes them as an attribute set instead of relying on a
particular input argument.
The useNetworkd argument still exists however.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @wkennington
Now subtests are separate derivations, because the individual tests do
not depend on state from previous test runs.
This has the advantage that it's easier to run individiual tests and
it's also easier to pinpoint individual tests that randomly fail.
I ran all of these tests locally and they still succeed.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
It looks like now queue is not immediately cleared from cancelled jobs.
Instead, files like "c00001" are left alongside "d00001-001", and
cleanup happens at some later point of time. Also, all new jobs are
assigned consecutive numbers now (00002, 00003 etc.). So when
original d00001 file is finally cleaned, it breaks the test. Fixed
by checking for any "d*" file inside the queue and cleaning it by
ourselves to ensure that each job works correctly.
Allow usage of list of strings instead of a comma-separated string
for filesystem options. Deprecate the comma-separated string style
with a warning message; convert this to a hard error after 16.09.
15.09 was just released, so this provides a deprecation period during
the 16.03 release.
closes#10518
Signed-off-by: Robin Gloster <mail@glob.in>
Generally we shouldn't ship pre-release versions anyway, and we
certainly don't want them to be release blockers. Also, chromium
builds are just too slow to have them blocking the channel (see
https://github.com/NixOS/nixpkgs/issues/12794).
With the new upstream Git version of ioquake3 introduced in 7fc7502, the
arguments to the quake3(server) binaries/wrappers may no longer be
passed as full single arguments (like "+set foo bar") but rather as
separate arguments (like "+set" "foo" "bar"), otherwise they will be
completely ignored.
Ran the x86_64-linux test on my machine and it now succeeds.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Regression introduced by 6b447a3c9b.
In this commit the Quake 3 demo data now have a meta attribute which
specifies the license as unfreeRedistributable.
While I haven't found anything official about that on the web, let's
just allow it to be used in the test because first of all, we have been
using it for a long time (since 2009, introduced in 497760b) and second,
because it will be quite some effort to rewrite the test with something
like OpenArena (particularily because we need coverage data and need to
use the ioquake3 version plus OpenArena-specific patches).
Tested evaluation on my local system, but the VM test still fails.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
It serves as a regression test, because right now if you enable
networking.useNetworkd the default loopback interface doesn't get
assigned any IP addresses.
To be sure, I have bisected this and it has been introduced with the
update to systemd 228 in 1da87d4.
Only the "scripted" networking tests have to succeed in order to trigger
a channel update of nixos-unstable, so I'm leaving this test as broken
and we have to figure out next what's the *exact* reason for the
breakage.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
systemd-udev-settle is not started by default anymore.
Because checking for psmouse like that is considered legacy,
we start systemd-udev-settle manually in the test.
cc @edolstra
The most complex problems were from dealing with switches reverted in
the meantime (gcc5, gmp6, ncurses6).
It's likely that darwin is (still) broken nontrivially.
Commit 9bfe92ecee ("docker: Minor improvements, fix failing test") added
the services.docker.storageDriver option, made it mandatory but didn't
give it a default value. This results in an ugly traceback when users
enable docker, if they don't pay enough attention to also set the
storageDriver option. (An attempt was made to add an assertion, but it
didn't work, possibly because of how "mkMerge" works.)
The arguments against a default value were that the optimal value
depends on the filesystem on the host. This is, AFAICT, only in part
true. (It seems some backends are filesystem agnostic.) Also, docker
itself uses a default storage driver, "devicemapper", when no
--storage-driver=x options are given. Hence, we use the same value as
default.
Add a FIXME comment that 'devicemapper' breaks NixOS VM tests (for yet
unknown reasons), so we still run those with the 'overlay' driver.
Closes#10100 and #10217.
I'm not quite sure why the official Hydra gets a kernel panic in one of
two VMs using the exact same kernels:
https://hydra.nixos.org/build/26339384
Because the kernel panic happens before stage 1, let's wait for the
first VM to boot up and after the bootup is done, start the second one
in hope that it won't trigger the panic.
Oddly enough, whenever I run the test on my own Hydra and on my local
machines, I don't get anything like that.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
I forgot to do this in da0e642. It shouldn't be a big problem but it's
more clean to destroy the VM once we're done testing.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We previously had 1024 MB of memory to fit a VirtualBox VM with 512 MB
plus the memory needed of the VirtualBox host VM. That obviously won't
work for two VirtualBox VMs, which are used for testing networking
between two VirtualBox guests.
Now, we have 2048 MB on the qemu guest (the VirtualBox host) and 768 MB
for each VirtualBox guest. That should be enough to fit in two
VirtualBox guests (I hope).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Unfortunately, we can't test whether USB is really working, but we can
make sure that VirtualBox has access to the USB devices.
This is essentially testing #9736, which I haven't yet been able to
reproduce though, but it makes sense to test it so it won't happen in
future releases.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Addresses #9876 in the way that we want to make sure that VirtualBox 5.x
is going to be properly detected. Right now the result is "kvm", so the
subtest fails as expected with:
error: systemd-detect-virt returned "kvm" instead of "oracle" at (eval
14) line 414, <__ANONIO__> line 92.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Makes it easier to debug and find out for which machine a certain log
socket has been started or stopped.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We're simply using antiquotation, since it's been a while since these
got introduced (in Nix 1.7). So we can use them because it makes the
code much more readable.
As usual, I made sure that I didn't accidentally change something in
functionality:
$ nix-instantiate nixos/tests/virtualbox.nix
...
/nix/store/cldxyrxqvwpqm02cd3lvknnmj4qmblyn-vm-test-run-virtualbox.drv
$ git stash pop
...
$ nix-instantiate nixos/tests/virtualbox.nix
...
/nix/store/cldxyrxqvwpqm02cd3lvknnmj4qmblyn-vm-test-run-virtualbox.drv
$
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is essentially not only "wrapping" the line but refactoring into a
shorter name which is used in two places.
And yes, I know I'm very pedantic if it comes to whitespaces and line
lengths, but I made sure this doesn't change any functionality:
$ nix-instantiate nixos/tests/virtualbox.nix
...
/nix/store/cldxyrxqvwpqm02cd3lvknnmj4qmblyn-vm-test-run-virtualbox.drv
$ git stash pop
...
$ nix-instantiate nixos/tests/virtualbox.nix
...
/nix/store/cldxyrxqvwpqm02cd3lvknnmj4qmblyn-vm-test-run-virtualbox.drv
$
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Instead of manually setting debug to true or false, this should make it
possible to now run the test like this:
nix-build nixos/tests/virtualbox.nix --arg debug true
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Sometimes there are random kernel panics do to the lack of memory in the
qemu guests, but as we're setting the VirtualBox memory size relatively
low, 1024 MB should be enough for the qemu guests.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We want to check whether DBus functionality is working, so let's make
sure it is running in our mini-initrd.
DBus unfortunately requires to have users properly set up and another
configuration file other than in ${dbus.daemon}/etc/dbus-1/system.conf,
so we do provide that as well.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Using waitForWindow on the IceWM root window doesn't necessarily mean
that the panel will be shown. In the lightdm test, we only make sure
that the login is working and thus it doesn't matter how the session
itself will look or whether IceWM is broken, so we don't need that
screenshot.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Currently the lightdm test detects a successful login by OCR'ing the
screen and searching for the clock widget's text. Since the last
IceWM update (commit bdd20ced), either the font or the colors of the
clock changed such that the OCR doesn't pick it up anymore.
Instead, just look for a matching (root) window title, e.g.
"IceWM 1.3.9 (Linux/i686)"
Commit 687caeb renamed services.virtualboxHost to programs.virtualbox,
but according to the discussion on the commit, it's probably a better to
put it into virtualisation.virtualbox instead.
The discussion can be found here:
https://github.com/NixOS/nixpkgs/commit/687caeb#commitcomment-12664978
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
