Very confusingly, the `isPowerPC` predicate in
`lib/systems/inspect.nix` does *not* match `powerpc64le`!
This is because `isPowerPC` is defined as
isPowerPC = { cpu = cpuTypes.powerpc; };
Where `cpuTypes.powerpc` is:
{ bits = 32; significantByte = bigEndian; family = "power"; };
This means that the `isPowerPC` predicate actually only matches the
subset of machines marketed under this name which happen to be 32-bit
and running in big-endian mode which is equivalent to:
with stdenv.hostPlatform; isPower && isBigEndian && is32bit
This seems like a sharp edge that people could easily cut themselves
on. In fact, that has already happened: in
`linux/kernel/common-config.nix` there is a test which will always
fail:
(stdenv.hostPlatform.isPowerPC && stdenv.hostPlatform.is64bit)
A more subtle case of the strict isPowerPC being used instead of the
moreg general isPower accidentally are the GHC expressions:
Update pkgs/development/compilers/ghc/8.10.7.nix
Update pkgs/development/compilers/ghc/8.8.4.nix
Update pkgs/development/compilers/ghc/9.2.2.nix
Update pkgs/development/compilers/ghc/9.0.2.nix
Update pkgs/development/compilers/ghc/head.nix
Since the remaining legitimate use sites of isPowerPC are so few, remove
the isPowerPC predicate completely. The alternative expression above is
noted in the release notes as an alternative.
Co-authored-by: sternenseemann <sternenseemann@systemli.org>
* origin/staging-next: (62 commits)
Re-Revert "lua: fix on darwin by using makeBinaryWrapper (#172749)"
openldap: fix cross-compilation
makeBinaryWrapper: fix codesign on aarch64-darwin
python3Packages.ldap: fix linking with openldap 2.5+
Revert "lua: fix on darwin by using makeBinaryWrapper (#172749)"
wine: enable parallel build again
pkgsi686Linux.gdb: fix formatting for 32-bit systems
gtk4: Fix incorrect merge
nixos/openldap: use upstream unit defaults
openldap: update maintainers
openldap: 2.4.58 -> 2.6.2
Revert "Add mingwW64-llvm cross-system."
lua: fix on darwin by using makeBinaryWrapper (#172749)
python310Packages.python-mimeparse: execute tests
pandas: fix darwin build
gtk3: 3.24.33 -> 3.24.33-2022-03-11
gtk4: patch fixing g-c-c crashes
e2fsprogs: patch for CVE-2022-1304
firefox-unwrapped: fix cross compilation
rustc: expose correct llvmPackages for cross compile
...
Since the list only gates the platforms the nixpkgs flake exposes
packages to build on, the `hydra` label made little sense. It was also
only used for this purpose, so the `tier*` attributes were largely
unnecessary.
To reflect the intention more accurately, we expose
`lib.systems.flakeExposed` and use it to gate flake.nix's system list.
Otherwise, it wouldn't get restarted when a new system configuration
was activatad, so the Postfix configuration wouldn't be updated.
Fixes: fb2fa1b50f ("nixos/postfix: pull setup into its own unit")
There is a comment above the invocation of 'nextcloud-occ app:enable', stating
that the script should not fail if any of the apps cannot be enabled, but there
is nothing in place to suppress errors. The app:enable command already
continues installing the remaining apps when one fails to install, and we do not
want to suppress errors in the setup script, so this just removes the comment
about not failing.
* Removed unused `.package`-option.
* Added explicit postgresql support.
* Create a new meta-package for mailman to make sure each component has
the **same** python and packages can be downgraded if needed (e.g.
psycopg2 or sqlalchemy) without interfering with `pythonPackages` in any way.
* Document why certain python overrides are needed.
Closes#170035Closes#158424
OpenLDAP since version 2.5.4¹ supports sd_notify, so we should make use
of it.
Also updates the unit description and documentation with the values
upstream provides.
Starts slapd only after reaching `network-online.target`, which ensures
binding to specific ip addresses is possible, since `network.target`
only guarantees interfaces exist, but not that addressing is finished.
[1] https://bugs.openldap.org/show_bug.cgi?id=8707
switchboard-plug-power is providing support for this since 2.7.0.
Note that we don't handle the conflict with tlp because we have
no way of knowing which way a user wants to resolve the conflict.
A git command was failing in the test with
error: unable to get random bytes for temporary file: Operation not permitted
error: unable to create temporary file: Operation not permitted
error: .Radicale.lock: failed to insert into database
error: unable to index file '.Radicale.lock'
Recent `wrapGAppsHook` change stops `adwaita-icon-theme` from being added to `XDG_DATA_DIRS`:
b1e73fa2e0
Since `display-manager.service` does not have `/run/current-system/sw/share` in `XDG_DATA_DIRS`, it does not pick up the globally installed icon theme either, preventing icons from showing.
Let’s make Adwaita available to fix that for now.
Fixes: https://github.com/NixOS/nixpkgs/issues/171692
Account for all `with*` options causing their respective unit files to
not be built, just like the current code `withCryptsetup` already does.
This fixes build errors like the following:
```
missing /nix/store/5fafsfms64fn3ywv274ky7arhm9yq2if-systemd-250.4/example/systemd/system/systemd-importd.service
error: builder for '/nix/store/67rdli5q5akzwmqgf8q0a1yp76jgr0px-system-units.drv' failed with exit code 1
```
Found by using a customised systemd package as follows:
```
systemd.package = pkgs.systemd-small;
nixpkgs.config.packageOverrides = pkgs: {
"systemd-small" = pkgs.systemd.override {
withImportd = false;
withMachined = false;
...
};
};
```
verbose is a debugging setting one step noisier than debug and should only be turned on when debugging because it leaks quite some credentials and tokens in the journalctl.
we expose it under settings instead of at the listener toplevel because
mosquitto seems to pick the addresses it will listen on
nondeterministically from the set of addresses configured on the
interface being bound to. encouraging its use by putting it into the
toplevel options for a listener seems inadvisable.
The old attribute is deprecated:
trace: warning: In test `chromium-stable': The `machine' attribute in NixOS
tests (pkgs.nixosTest / make-test-pyton.nix / testing-python.nix / makeTest) is
deprecated. Please use the equivalent `nodes.machine'.
Note: This is only a refactoring.
* Add an option services.nextcloud.nginx.hstsMaxAge for setting the max-age
directive of the Strict-Transport-Security HTTP header.
* Make the Strict-Transport-Security HTTP header in the Nginx virtualhost block
dependant upon the option services.nextcloud.https instead of
services.nextcloud.nginx.recommendedHttpHeaders, as this header makes no sense
when not using HTTPS. (Closes#169465)
This should be a significant disk space saving for most NixOS
installations. This method is a bit more complicated than doing it in
the postInstall for the firmware derivations, but this way it's
automatic, so each firmware package doesn't have to separately
implement its compression.
Currently, only xz compression is supported, but it's likely that
future versions of Linux will additionally support zstd, so I've
written the code in such a way that it would be very easy to implement
zstd compression for those kernels when they arrive, falling back to
xz for older (current) kernels.
I chose the highest possible level of compression (xz -9) because even
at this level, decompression time is negligible. Here's how long it took
to decompress every firmware file my laptop uses:
i915/kbl_dmc_ver1_04.bin 2ms
regulatory.db 4ms
regulatory.db.p7s 3ms
iwlwifi-7265D-29.ucode 62ms
9d71-GOOGLE-EVEMAX-0-tplg.bin 22ms
intel/dsp_fw_kbl.bin 65ms
dsp_lib_dsm_core_spt_release.bin 6ms
intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq 7ms
And since booting NixOS is a parallel process, it's unlikely (but
difficult to measure) that the time to user interaction was held up at
all by most of these.
Fixes (partially?) #148197
These two packages don't have a lib/firmware directory, so putting
them in hardware.firmware has no effect. This will become a hard
error once firmware compression is implemented.
(In the case of Linux, the firmware was all moved to linux-firmware.)
automysqldump passes the --events flag, but without the EVENTS permission a error occures:
> mysqldump: Couldn't execute 'show events': Access denied for user 'automysqlbackup'@'localhost' to database 'mysql' (1044)
Add support for enabling confinement
but does not enable it by default yet
because so far no module within NixOS uses confinement
hence that would set a precedent.
This allows btrbk instances without a triggering timer by setting
`onCalendar` to `null`.
This is useful for manual-starting only btrbk backup settings.
Introduced in OpenSSH 9.0 it became the part of the default kexAlgorithm
selection, visibile in sshd_config(5).
It is also enabled by default in the OpenSSH client, as can be seen from
$ ssh -Q KexAlgorithms
Also clarifies that we use the referenced documents as the lower bound,
given that they haven't been updated for 5-7y.
Previously, it was held back due to the ENA driver not building on the
current default (5.15). The previous commit bumps the ENA driver, which
allows 5.15 to work.
This will package up the closure of pkgs.hello in a tarball, and will
later on verify machinectl pull-tar properly unpacked it, serving as a
regression test for #108158.
Closes#108158
Initially applied via e7f6370701, then
reverted by 96aaf29234.
Re-applying this patch: the pleroma NixOS test is broken without it.
It was originally impossible to login in toot without having an
interactive shell. I opened https://github.com/ihabunek/toot/pull/180
upstream to fix that and fetch this patch for this test.
The author decided to fix the issue using a slightly different
approach at a3eb5dca24
Because of this upstream fix, our custom patch does not apply anymore.
Using that stdin-based login upstream feature.
Pointing pleroma_ctl to the right RELEASE_COOKIE as well.
Tailscale uses policy routing to enable certain traffic to bypass
routes that lead into the Tailscale mesh. NixOS's reverse path
filtering setup doesn't understand the policy routing at play,
and so incorrectly interprets some of this traffic as spoofed.
Since this only breaks some features of Tailscale, merely warn
users about it, rather than make it a hard error.
Updates tailscale/tailscale#4432
Signed-off-by: David Anderson <dave@natulte.net>
Added Nextcloud 23 and set it as the default Nextcloud version for the
NixOS module. Added PHP 8.1 as an option for phpPackage and default for
Nextcloud ≥ 24.
For some features, tailscaled uses getent(1) to get the shell
of OS users. getent(1) is in the glibc derivation. Without this
derivation in the path, tailscale falls back to /bin/sh for all
users.
Signed-off-by: David Anderson <dave@natulte.net>
