The metadata fetcher scripts run each time an instance starts, and it
is not safe to assume that responses from the instance metadata
service (IMDS) will be as they were on first boot.
Example: an EC2 instance can have its user data changed while
the instance is stopped. When the instance is restarted, we want to
see the new user data applied.
According to Freenode's ##AWS, the metadata server can sometimes
take a few moments to get its shoes on, and the very first boot
of a machine can see failed requests for a few moments.
AWS's metadata service has two versions. Version 1 allowed plain HTTP
requests to get metadata. However, this was frequently abused when a
user could trick an AWS-hosted server in to proxying requests to the
metadata service. Since the metadata service is frequently used to
generate AWS access keys, this is pretty gnarly. Version two is
identical except it requires the caller to request a token and provide
it on each request.
Today, starting a NixOS AMI in EC2 where the metadata service is
configured to only allow v2 requests fails: the user's SSH key is not
placed, and configuration provided by the user-data is not applied.
The server is useless. This patch addresses that.
Note the dependency on curl is not a joyful one, and it expand the
initrd by 30M. However, see the added comment for more information
about why this is needed. Note the idea of using `echo` and `nc` are
laughable. Don't do that.
See https://www.redhat.com/sysadmin/fedora-31-control-group-v2 for
details on why this is desirable, and how it impacts containers.
Users that need to keep using the old cgroup hierarchy can re-enable it
by setting `systemd.unifiedCgroupHierarchy` to `false`.
Well-known candidates not supporting that hierarchy, like docker and
hidepid=… will disable it automatically.
Fixes#73800
This reverts commit fb6d63f3fd.
I really hope this finally fixes#99236: evaluation on Hydra.
This time I really did check basically the same commit on Hydra:
https://hydra.nixos.org/eval/1618011
Right now I don't have energy to find what exactly is wrong in the
commit, and it doesn't seem important in comparison to nixos-unstable
channel being stuck on a commit over one week old.
This adds the pinns path to the configuration let CRI-O start properly.
We also change the configuration to the new drop-in syntax.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
The toplevel derivations of systems that have `networking.hostName`
set to `""` (because they want their hostname to be set by DHCP) used
to be all named
`nixos-system-unnamed-${config.system.nixos.label}`.
This makes them hard to distinguish.
A similar problem existed in NixOS tests where `vmName` is used in the
`testScript` to refer to the VM. It defaulted to the
`networking.hostName` which when set to `""` won't allow you to refer
to the machine from the `testScript`.
This commit makes the `system.name` configurable. It still defaults to:
```
if config.networking.hostName == ""
then "unnamed"
else config.networking.hostName;
```
but in case `networking.hostName` needs to be to `""` the
`system.name` can be set to a distinguishable name.
This is analogous to #70447.
With security.lockKernelModules=true, docker commands result in the following
error without at least loading veth:
$ docker run hello-world
/nix/store/mr50kaan2vs4gc40ymwncb2vci25aq7z-docker-19.03.2/libexec/docker/docker: Error response from daemon: failed to create endpoint epic_kare on network bridge: failed to add the host (veth8b381f3) <=> sandbox (veth348e197) pair interfaces: operation not supported.
ERRO[0003] error waiting for container: context canceled
This is required by (among others) Podman to run containers in rootless mode.
Other distributions such as Fedora and Ubuntu already set up these mappings.
The scheme with a start UID/GID offset starting at 100000 and increasing in 65536 increments is copied from Fedora.
Per upstream:
> libvirtd-tcp.socket - the unit file corresponding to the TCP 16509
> port for non-TLS remote access. This socket should not be configured
> to start on boot until the administrator has configured a suitable
> authentication mechanism.
Without this, systemd-boot does not add an EFI boot entry for itself.
The reason it worked before this fix is because it would fall back to
the default installed \EFI\BOOT\BOOTX64.EFI
boot.loader.grub.device` was hardcoded to `bootDevice`, which is
wrong, because that's the device for `/`, and with `useBootLoader`
the boot loader is not on that device.
This bug probably came into existence because of bad naming;
`virtualisation.bootDevice` has description
"The disk to be used for the root filesystem", which is very confusing;
it should be `.rootDevice` then!
Unfortunately, the description is right and the attribute name is wrong,
so it is not easy to change this without deprecation.
This commit ensures that even if you use `useBootLoader` and
`diskInterface == "scsi"`, the created VM can boot through, and can run
`nixos-rebuild afterwards.
It also adds extra commentary to explain what's going on in this module
in general in relation to `useBootLoader`.
VMSGVA is recommended by virtualbox for Linux clients.
Compared to VBoxVGA and VBoxSVGA it also supports 3D acceleration.
Adding the driver makes nixos work with all three supported graphics card
types.
xchg is advertised as a bidirectional exchange dir, but file content
transfer from host to VM fails due to caching:
If a file is read in the VM and then modified on the host, subsequent
re-reads in the VM can yield old, cached data.
This is caused by the use of 9p's cache=loose mode that is explicitly
meant for read-only mounts.
9p doesn't provide any suitable cache modes, so fix this by disabling
caching.
Also, remove a now unnecessary sync in the test driver.
- Update the default pause image
- Set the cgroup manager to systemd
- Enable `manage_ns_lifecycle` instead of the deprecated
`manage_network_ns_lifecycle` option
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
This follows upstreams change in documentation. While the `[DHCP]`
section might still work it is undocumented and we should probably not
be using it anymore. Users can just upgrade to the new option without
much hassle.
I had to create a bit of custom module deprecation code since the usual
approach doesn't support wildcards in the path.
What's happening now is that both cri-o and podman are creating
/etc/containers/policy.json.
By splitting out the creation of configuration files we can make the
podman module leaner & compose better with other container software.
Many options define their example to be a Nix value without using
literalExample. This sometimes gets rendered incorrectly in the manual,
causing confusion like in https://github.com/NixOS/nixpkgs/issues/25516
This fixes it by using literalExample for such options. The list of
option to fix was determined with this expression:
let
nixos = import ./nixos { configuration = {}; };
lib = import ./lib;
valid = d: {
# escapeNixIdentifier from https://github.com/NixOS/nixpkgs/pull/82461
set = lib.all (n: lib.strings.escapeNixIdentifier n == n) (lib.attrNames d) && lib.all (v: valid v) (lib.attrValues d);
list = lib.all (v: valid v) d;
}.${builtins.typeOf d} or true;
optionList = lib.optionAttrSetToDocList nixos.options;
in map (opt: {
file = lib.elemAt opt.declarations 0;
loc = lib.options.showOption opt.loc;
}) (lib.filter (opt: if opt ? example then ! valid opt.example else false) optionList)
which when evaluated will output all options that use a Nix identifier
that would need escaping as an attribute name.
extraModprobeConfig could be applied too late i.e. if the driver has been
loaded in initrd, while the harddrive is still encrypted.
Using a kernelParams works in all cases however.
This commit fixes#76620. It moves ExecStartPre and ExecStopPost to
preStart and postStop, as these options are composable. It thus allows
adding additional initialisation scripts or cleanup scripts to the systemd
unit of the docker container.
This option allows the user to control whether or not the docker container is
automatically started on boot. The previous default behavior (true) is preserved
NixOS has `virtualisation.docker.autoPrune.enable` for this
functionality; we should not do it every time a container starts up.
(also, some trivial documentation fixes)
- the `imageFile` option allows to load an image from a derivation
- the `dependsOn` option can be used to specify dependencies between container systemd units.
Co-authored-by: Christian Höppner <mkaito@users.noreply.github.com>