This commit is a fixup for a regression introduced by
0bdba6c99b.
Before the regression, it was possible to build images without grub or a
kernel (e.g. to boot other kernels with qemu -kernel.
After the regression, such images fail to build. Since
config.boog.loader.grub.enable is false in that scenario, grub.device is
emptystring. While this happens not to be an issue of `ln`, `dirname`
fails on emptystring.
With this change, we guard both commands to only be run when grub is
actually enabled. Images with and without grub succesfully build with
this change.
New EDK2 sets up the backdoor port as a serial console, which feeds the test driver
a bunch of boot logs it can safely ignore. Do so by waiting for the message the
backdoor shell prints before doing anything else.
According to systemd.netdev manpage:
```
MACAddress=
Specifies the MAC address to use for the device, or takes the special value "none". When "none", systemd-networkd does not request the MAC address for
the device, and the kernel will assign a random MAC address. For "tun", "tap", or "l2tp" devices, the MACAddress= setting in the [NetDev] section is
not supported and will be ignored. Please specify it in the [Link] section of the corresponding systemd.network(5) file. If this option is not set,
"vlan" device inherits the MAC address of the master interface. For other kind of netdevs, if this option is not set, then the MAC address is
generated based on the interface name and the machine-id(5).
Note, even if "none" is specified, systemd-udevd will assign the persistent MAC address for the device, as 99-default.link has
MACAddressPolicy=persistent. So, it is also necessary to create a custom .link file for the device, if the MAC address assignment is not desired.
```
Therefore, `none` is an acceptable value.
When lib overrides were used, before this commit, they would not be made
available in the configuration evaluation of nixosTest's nodes.
Sample code:
``` nix
let
pkgs = import ./. {
overlays = [
(new: old: {
lib = old.lib.extend (self: super: {
sorry_dave = builtins.trace "There are no pod bay doors" "sorry dave";
});
})
];
};
in
pkgs.testers.nixosTest {
name = "demo lib overlay";
nodes = {
machine = { lib, ... }: {
environment.etc."got-lib-overlay".text = lib.sorry_dave;
};
};
testScript = { nodes }:
''
start_all()
machine.succeed('grep dave /etc/got-lib-overlay')
'';
}
```
By some miracle, before, it was possible to reconnect to the `node1` without
doing any relevant dance.
But now we are direct booting (¿), it seems like we need to do the right things.
This introduces a `check_output` flag for `execute` because we do not want to steal the
messages from the backdoor service as we might execute the kexec too fast compared
to when we will reconnect.
Therefore, we will let the message in the pipe if needed.
This change removes the bespoke logic around identifying block devices.
Instead of trying to find the right device by iterating over
`qemu.drives` and guessing the right partition number (e.g.
/dev/vda{1,2}), devices are now identified by persistent names provided
by udev in /dev/disk/by-*.
Before this change, the root device was formatted on demand in the
initrd. However, this makes it impossible to use filesystem identifiers
to identify devices. Now, the formatting step is performed before the VM
is started. Because some tests, however, rely on this behaviour, a
utility function to replace this behaviour in added in
/nixos/tests/common/auto-format-root-device.nix.
Devices that contain neither a partition table nor a filesystem are
identified by their hardware serial number which is injecetd via QEMU
(and is thus persistent and predictable). PCI paths are not a reliably
way to identify devices because their availability and numbering depends
on the QEMU machine type.
This change makes the module more robust against changes in QEMU and the
kernel (non-persistent device naming) and by decoupling abstractions
(i.e. rootDevice, bootPartition, and bootLoaderDevice) enables further
improvement down the line.
they're no longer necessary for us and will almost definitely start to
rot now (like commonmark and asciidoc outputs did previously). most
existing users seem to take the docbook output and run it through pandoc
to generate html, those can easily migrate to use commonmark instead.
other users will hopefully pipe up when they notice that things they rely
on are going away.
optionsUsedDocbook has only been around for one release and only exposed
to allow other places to generate warnings, so that does not deserve
such precautions.
with everything being rendered from markdown now we no longer need to
postprocess any options.xml that may be requested from elsewhere. we'll
don't need to keep the module path check either since that's done by
optionsJSON now.
docbook is now gone and we can flip the defaults. we won't keep the
command line args around (unlike the make-options-docs argument) because
nixos-render-docs should not be considered an exposed API.
with docbook no longer supported we can default to markdown option docs.
we'll keep the parameter around for a bit to not break external users
who set it to true. we don't know of any users that do, so the
deprecation period may be rather short for this one.
it's been long in the making, and with 23.05 out we can finally disable
docbook option docs and default to markdown instead. this brings a
massive speed boost in manual and manpage builds, so much so that we may
consider enabling user module documentation by default.
we don't remove the docbook support code entirely yet because it's a lot
all over, and probably better removed in multiple separate changes.
- `wait_until_fails` was not passing through its `timeout` argument to
the internal `retry` function, hence was always using 900 seconds (the
default timeout for `retry`) rather than the user-specified value.
Previously, `wait_for_console_text` would block indefinitely until there were lines
shown in the buffer.
This is highly annoying when testing for things that can just hang for some reasons.
This introduces a classical timeout mechanism via non-blocking get on the Queue.
This is useful whenever you want to diagnose the current state of UEFI
variables, to assert that bootloaders or boot programs (systemd-stub)
did their job correctly and set their variables accordingly.
In the future, it can enable inspecting SecureBoot keys also.
This warning was added a year and a half ago, but still no test in
NixOS directly instantiates the machine class, presumably because it's
not actually possible for a test to do so without losing
functionality. For example, there's no way for a NixOS test to access
the output directory that create_machine passes to the Machine
constructor.
This warning is therefore just contributing to alert fatigue for
users, who are unable to follow its advice. Once it's actually
possible to do what it suggests, the warning can be reintroduced.
Adds a new option to the virtualisation modules that enables specifying explicitly named network interfaces in QEMU VMs.
The existing `virtualisation.vlans` option is still supported for cases where the name of the network interface is irrelevant.
By adding this option indirection, a test can declare all by itself
that it needs a custom nixpkgs. This is a more convenient way of
going about this when the caller of the test framework receives a
`node.pkgs` unconditionally.
mkIf is unnecessary when the condition is statically known - that is
knowable before entering the module evaluation.
By changing this to a precomputed module, we support changing the
defined options to readOnly options.
This change is made for two reasons:
1. If `toString config.restartTriggers` containes `\n`, systemd unit
file will be ill-formed.
2. This change can limit length of the trigger, although it doesn't
matter in most cases.
This allows modules that declare their class to be checked.
While that's not most user modules, frameworks can take advantage
of this by setting declaring the module class for their users.
That way, the mistake of importing a module into the wrong hierarchy
can be reported more clearly in some cases.
`make-disk-image` is a tool for creating VM images. It takes an argument
`contents` that allows one to specify files and directories that should
be copied into the VM image. However, directories end up not at the
specified target, but instead at a subdirectory of the target, with a
nix-store-like path, e.g.
`/target/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx-source`. See issue
https://github.com/NixOS/nixpkgs/issues/226203 .
This change adds a test for make-disk-image's contents directory
handling and adds a fix (appending `/` to rsync input directory names).
This closes issue https://github.com/NixOS/nixpkgs/issues/226203 .
What the code was trying to do was helpfully add a directory and
extension if none were specified, but it did this by checking whether
the filename was composed of a very limited character set that didn't
even include dashes.
With this change, the intention of the code is clearer, and I can put
dashes in my screenshot names.
the old method of pasting parts of options.json into a markdown document
and hoping for the best no longer works now that options.json contains
more than just docbook. given the infrastructure we have now we can
actually render options.md properly, so we may as well do that.
options processing is pretty slow right now, mostly because the
markdown-it-py parser is pure python (and with performance
pessimizations at that). options parsing *is* embarassingly parallel
though, so we can just fork out all the work to worker processes and
collect the results.
multiprocessing probably has a greater benefit on linux than on darwin
since the worker spawning method darwin uses is less efficient than
fork() on linux. this hasn't been tested on darwin, only on linux, but
if anything darwin will be faster with its preferred method.
The output of a command is not guaranteed to be valid UTF-8, so the
decoding can fail raising UnicodeDecodeError. If this happens during a
`succeeds` the check will be erroneously marked failed.
This changes the error handling to the "replace" mode, where invalid
codepoints are replaced with � (REPLACEMENT CHARACTER U+FFFD) and the
decoding can go on.
...for explicitly named network interfaces
This reverts commit 6ae3e7695e.
(and evaluation fixups 08d26bbb727aed90a969)
Some of the tests fail or time out after the merge.
using environment variables isn't great once multiple input or output
formats get involved (which will happen soon). now is a good time to set
a pattern for future converters.
this new package shall eventually contain the rendering code necessary
to produce the entirety of the nixos (not nixpkgs) manual, in all of its
various output formats.
`shell_interact()` is currently not nice to use. If you try to cancel
the socat process, it will also break the nixos test. Furthermore
ptpython creates it's own terminal that subprocesses are running in,
which breaks some of the terminal features of socat.
Hence this commit extends `shell_interact` to allow also to connect to
arbitrary servers i.e. tcp servers started by socat.
the rest of the nixos manual has them enabled, so we should enable them
here too for consistency.
this changes rendered output pervasively. changes also include quotes in
types (eg in `strings concatenated with "\n"`), but since those are not
code this is probably fine. if not we can probably add a myst role to
inhibit replacements.
the rules are fixed, and we want to support all of them (or throw a
useful error message). this will also become the base for a generic
renderer system, so let's just list all the rules statically.
this restores mergeJSON to its former glory if…merging json, and
extracts the MD rendering into a new script that will run instead of the
py+nix+xslt pipeline we previously ran to convert options.json to docbook.
this change alone gives a noticable performance boost when building
docs (18s instead of 27s to build optionsDocBook).
no changes to rendered output, except for a single example in the
rsnapshot module that uses hard tabs for indentation instead of spaces.
this probably isn't important.
docbook warnings remain with mergeJSON since the other processing steps
output single files instead of directories. since we'll only keep the
check until 23.11 this is probably also not important to fix.
also contains a few improvements to error reporting in the MD renderers.
Adds a new option to the virtualisation modules that enables specifying
explicitly named network interfaces in QEMU VMs. The existing
`virtualisation.vlans` is still supported for cases where the name of
the network interface is irrelevant.
only whitespace changes (mostly empty descriptions rendered as literal
line breaks and trailing space toPretty generates, but that were dropped
by mistune).
don't generate docbook for related packages, generate markdown instead.
this could be extended further to not even generate markdown but have
mergeJSON handle all of the rendering. markdown will work fine for now
though.
only whitespace changes to rendered outputs, all in the vicinity or body
of admonitions. previously admonitions would not receive paragraph
breaks even when they should have because the description postprocessing
did not match on their contents.
markdown-it-py creates different whitespace leaders/trailers than are
currently emitted, and when we convert examples and defaults to render
via markdown the spacing will change too. this has no effect on rendered
output.
mistune already does escaping. it does escaping for html, but the
difference is small enough that can just ignore that we're actually
targeting docbook here.
this was done only to make the conversion to MD easier to verify. we no
longer need it, and not keeping whitespace does not affect rendered outputs.
stripping will have to stay for now because description postprocessing
would add empty paragraphs otherwise.
following the plan in https://github.com/NixOS/nixpkgs/pull/189318#discussion_r961764451
also adds an activation script to print the warning during activation
instead of during build, otherwise folks using the new CLI that hides
build logs by default might never see the warning.
checkInputs used to be added to nativeBuildInputs. Now we have
nativeCheckInputs to do that instead. Doing this treewide change allows
to keep hashes identical to before the introduction of
nativeCheckInputs.
mkAliasOptionModule should not default to mdDoc descriptions because
that can break out-of-tree users of documentation infrastructure. add an
explicitly-MD variant for now, to be removed some time after the MD
transition is complete.
A few places used Unicode U+2018/U+2019 left/right single quotes (but
not always correctly balanced). Let's just use plain ASCII single quotes
everywhere.
- Extensive documentation in NixOS manual
- Deterministic mode that fixes various identifiers relative to disk
partitions and filesystems in ext4 case
- UEFI variable recording
Render un`_type`d defaults and examples as `literalExpression`s using
`lib.generators.toPretty` so that consumers don't have to reinvent Nix
pretty-printing. `renderOptionValue` is kept internal for now intentionally.
Make `toPretty` print floats as valid Nix values (without a tilde).
Get rid of the now-obsolete `substSpecial` function.
Move towards disallowing evaluation of packages in the manual by
raising a warning on `pkgs.foo.{outPath,drvPath}`; later, this should
throw an error. Instead, module authors should use `literalExpression`
and `mkPackageOption`.
Unlike the XML doc renderer, the AsciiDoc and CommonMark renderers don't
pretty-print certain complex types, like literal expressions, DocBook
literals, and derivations. These types are dumped into the documentation
as JSON.
This commit parses and unwraps these types when loading the
JSON-formatted NixOS options. The AsciiDoc and CommonMark renders have
also been combined into a single script to allow code reuse.
Before this patch, if we:
1. add a new user in the config,
2. mount /home seperately,
3. not set neededForBoot for /home,
4. and run `nixos-rebuild boot`,
the newly added user's home will not be created after a reboot. This
is because when nixos/modules/config/update-users-groups.pl is running
in stage 2 to setup users, /home is not mounted.
This patch fixes this issue.
\<foo\> will often be displayed like \<foo>, for example by mkdocs.
I've tested a number of markdown renderers and they render html escape
sequences fine.
Until this commit, the documentation suggested `multi-user.target`
as `wantedBy` for all services.
Since `multi-user.target` is not available for user services,
propose a different default for those in the documentation.
Co-authored-by: Naïm Favier <n@monade.li>
Co-authored-by: Florian Warzecha <liketechnik@disroot.org>
Provide a window during which both solutions are valid without
warnings, in order to fight warning fatigue, and not to push 3rd
party repo maintainers to add unnecessary compat code.
Fixes the problem introduced by 12b3066aae
which caused nixos/release.nix to return the wrong attributes, while
intending to only affect nixos/lib's runTest.
This also removes callTest from the test options, because callTest is
only ever invoked by all-tests.nix.
It has been replaced by the modular test framework in nixos/lib/testing.
If you are looking for a way to produce a VM-test-like configuration
outside of the test framework, use the nixos/lib/testing/nixos-test-base.nix
NixOS module, possibly in combination with { _module.args.nodes = .....; }.
Before this, it relied on being able to `imports` from the `name`
module argument, which wasn't really necessary and required a
potentially quite breaking change. We can revert that now.
This is a decomposition of the testing-python.nix and build-vms.nix
files into modules.
By refactoring the glue, we accomplish the following:
- NixOS tests can now use `imports` and other module system features.
- Network-wide test setup can now be reusable; example:
- A setup with all VMs configured to use a DNS server
- Split long, slow tests into multiple tests that import a
common module that has most of the setup.
- Type checking for the test arguments
- (TBD) "generated" options reference docs
- Aspects that had to be wired through all the glue are now in their
own files.
- Chief example: interactive.nix.
- Also: network.nix
In rewriting this, I've generally stuck as close as possible to the
existing code; copying pieces of logic and rewiring them, without
changing the logic itself.
I've made two exceptions to this rule
- Introduction of `extraDriverArgs` instead of hardcoded
interactivity logic.
- Incorporation of https://github.com/NixOS/nixpkgs/pull/144110
in testScript.nix.
I might revert the latter and split it into a new commit.
deprecate literalDocBook by adding a warning (that will not fire yet) to
its uses and other docbook literal strings by adding optional warning
message to mergeJSON.
For example, the wait_for_unit() call in the Moodle test times out for
myself and others[1], so it would be good to be able to increase it to
something less likely to be hit by a test that would otherwise pass.
[1]: https://github.com/NixOS/nixpkgs/pull/177052#issue-1266336706
conversions were done using https://github.com/pennae/nix-doc-munge
using (probably) rev f34e145 running
nix-doc-munge nixos/**/*.nix
nix-doc-munge --import nixos/**/*.nix
the tool ensures that only changes that could affect the generated
manual *but don't* are committed, other changes require manual review
and are discarded.
