Using `replace-literal` to insert secrets leaks the secrets through
the `replace-literal` process' `/proc/<pid>/cmdline`
file. `replace-secret` solves this by reading the secret straight from
the file instead, which also simplifies the code a bit.
Using `replace-literal` to insert secrets leaks the secrets through
the `replace-literal` process' `/proc/<pid>/cmdline`
file. `replace-secret` solves this by reading the secret straight from
the file instead.
Using `replace-literal` to insert secrets leaks the secrets through
the `replace-literal` process' `/proc/<pid>/cmdline`
file. `replace-secret` solves this by reading the secret straight from
the file instead, which also simplifies the code a bit.
Using `replace-literal` to insert secrets leaks the secrets through
the `replace-literal` process' `/proc/<pid>/cmdline`
file. `replace-secret` solves this by reading the secret straight from
the file instead, which also simplifies the code a bit.
Using `replace-literal` to insert secrets leaks the secrets through
the `replace-literal` process' `/proc/<pid>/cmdline`
file. `replace-secret` solves this by reading the secret straight from
the file instead, which also simplifies the code a bit.
The PAM config deployed would not check anything meaningful. Remove it
and rely on the defaults in the security.pam module to fix login with
arbitrary credentials.
Resolves: #123435
It was basically just a `environment.systemPackages` synonym,
only GNOME used it, and it was stretching the responsibilities
of the flatpak module too far.
It also makes it cleaner to avoid installing the program
using GNOME module’s `excludePackages` option.
Partially reverts: https://github.com/NixOS/nixpkgs/pull/101516
Fixes: https://github.com/NixOS/nixpkgs/issues/110310
Starting Cagebreak as X11 client doesn't work anymore as wlroots 0.13
started to require the DRI3 extension which isn't supported by LLVMpipe:
machine # [ 13.508284] xsession[938]: 00:00:00.003 [ERROR] [backend/x11/backend.c:433] X11 does not support DRI3 extension
machine # [ 13.666989] show_signal_msg: 62 callbacks suppressed
machine # [ 13.666993] .cagebreak-wrap[938]: segfault at 8 ip 0000000000408574 sp 00007ffef76f2440 error 4 in .cagebreak-wrapped[407000+d000]
machine # [ 13.670483] Code: f4 ff ff 4c 8b 84 24 70 01 00 00 8d 45 01 48 89 c5 49 8b 3c c0 48 85 ff 75 e4 4c 89 c7 e8 84 f4 ff ff 48 8b bc 24 18 01 00 00 <48> 8b 47 08 4c 8d 6f d8 48 8d 68 d8 48 39 df 75 0e eb 36 66 0f 1f
machine # [ 13.518274] xsession[938]: 00:00:00.006 [ERROR] [../cagebreak.c:313] Unable to create the wlroots backend
The test broke after updating Cagebreak in #121652 (bf8679ba94).
XWayland still fails for unknown reasons:
Modifiers specified, but DRI is too old
libEGL warning: DRI2: failed to create dri screen
libEGL warning: NEEDS EXTENSION: falling back to kms_swrast
glamor: No eglstream capable devices found
glamor: 'wl_drm' not supported
Missing Wayland requirements for glamor GBM backend
Missing Wayland requirements for glamor EGLStream backend
Failed to initialize glamor, falling back to sw
00:00:03.534 [ERROR] [xwayland/server.c:252] waitpid for Xwayland fork
failed: No child processes
(EE) failed to write to XWayland fd: Broken pipe
/nix/store/kcm3x8695fgycf31grzl9fy5gggwpram-xterm-367/bin/xterm: Xt
error: Can't open display: :0
The fallback to software rendering is to be expected but it looks like
XWayland is crashing with "failed to write to XWayland fd: Broken pipe".
`systemd.network.networks.*.dhcpServerConfig` did not accept all of
the options which are valid for networkd's [DHCPServer] section. See
systemd.network(5) of systemd 247 for details.
`allowKeysForGroup` is no longer available so this drops
```
security.acme.certs."example.com".allowKeysForGroup = true;
```
line. `SupplementaryGroups` should be enough for
allowing access to certificates.
According to the ABNF grammar for PEM files described in [RFC
7468][1], an eol character (i.e. a newline) is not mandatory after the
posteb line (i.e. "-----END CERTIFICATE-----" in the case of
certificates).
This commit makes our CA certificate bundler expression account for
the possibility that files in config.security.pki.certificateFiles
might not have final newlines, by using `awk` instead of `cat` to
concatenate them. (`awk` prints a final newline from each input file
even if the file doesn't end with a newline.)
[1]: https://datatracker.ietf.org/doc/html/rfc7468#section-3
While looking at the sphinx package I noticed it was heavily
undermaintained, which is when we noticed nand0p has been inactive for
roughly 18 months. It is therefore prudent to assume they will not be
maintaining their packages, modules and tests.
- Their last contribution to nixpkgs was in 2019/12
- On 2021/05/08 I wrote them an email to the address listed in the
maintainer-list, which they didn't reply to.
- use "with subtest" everywhere
- do more in nix and less in python
- use makeTest directly to define multiple tests instead of one with
multiple nodes -> this enables them to run in parallel
- Thunderbird 68 has been dropped on master.
- gccCrossLibcStdenv has been factored out on staging-next in all-packages.nix, while the file has been re-formatted on master.
Most programs already run natively under Wayland so extraSessionCommands
isn't as important anymore. XWayland is already covered by
"programs.xwayland.enable = mkDefault true;" in the module.
Also document that `ProtectClock` blocks access to serial line.
I couldn't found out why this is the case,
but faxgetty complains about the device file
not being accessible with `ProtectClock=true`.
This should make it easier to get started.
The xdg-desktop-portal backend for wlroots is required and one needs to
"make sure WAYLAND_DISPLAY and XDG_CURRENT_DESKTOP are imported into
D-Bus." [0]
[0]: efcbcb60aa/README.md (running)
Or … none! Because forcing a string always results in an OnCalender=
setting, but an empty string leads to an empty value.
> postgresqlBackup-hass.timer: Timer unit lacks value setting. Refusing.
or
> postgresqlBackup-miniflux.timer: Cannot add dependency job, ignoring: Unit postgresqlBackup-miniflux.timer has a bad unit file setting.
I require the postgresqlBackup in my borgbackup unit, so I don't
strictly need the timer and could previously set it to an empty list.
This reverts commit 6f6b2cdc98.
Version wasn't updated, and apparently a patch didn't apply. Let's do
this upgrade properly, in a PR, but for now I'm reverting so we don't
have a broken nix package in master.
According to
https://github.com/NixOS/nixpkgs/pull/84556
this effort helps with cross-compilation.
This commit also renames a substituted variable `hylafax`
to `hylafaxplus` to permit substitution with `inherit`.
AFAIK this is the only reliable way for us to ensure SQLCipher will be
loaded instead of SQLite. It feels like a hack/workaround but according
to the SQLCipher developers [0] "this issue can and should be handled
downstream at the application level: 1. While it may feel like a
workaround, using LD_PRELOAD is a legitimate approach here because it
will substitute the system SQLite with SQLCipher which is the intended
usage model;".
This fixes#108772 for NixOS 20.09 users who upgrade to NixOS 21.05 and
replaces #117555.
For nixos-unstable users this will unfortunately break everything again
so we should add a script to ease the transition (in a separate commit
so that we can revert it for NixOS 21.05).
[0]: https://github.com/sqlcipher/sqlcipher/issues/385#issuecomment-802874340
Well, this should test if the database is encrypted but currently it is
still unencrypted and we need to notice if this behaviour changes in the
future (as it will cause data loss, see e.g. #108772).
Anyway, this doesn't really matter for security reasons but we need this
test to prevent data loss (unfortunately Signal-Desktop and SQLCipher
handle this badly... :o).
This test is important to confirm that $WAYLAND_DISPLAY is correctly
imported via "dbus-update-activation-environment --systemd" which is
done by default since #122605 (00e8e5b123).
It ensures that the gnome3-pinentry pop-ups work as expected to avoid
regressions like #119445 (which also broke screen sharing).
The distinction between the inputs doesn't really make sense in the
mkShell context. Technically speaking, we should be using the
nativeBuildInputs most of the time.
So in order to make this function more beginner-friendly, add "packages"
as an attribute, that maps to nativeBuildInputs.
This commit also updates all the uses in nixpkgs.
Both networking.nat.enable and virtualisation.docker.enable now want to
make sure that the IP forwarding sysctl is enabled, but the module
system dislikes that both modules contain this option.
Realistically this should be refactored a bit, so that the Docker module
automatically enables the NAT module instead, but this is a more obvious
fix.
The essential commands from the NixOS installer as a package
With this package, you get the commands like nixos-generate-config and
nixos-install that you would otherwise only find on a NixOS system, such
as an installer image.
This way, you can install NixOS using a machine that only has Nix.
It also includes the manpages, which are important because the commands
rely on those for providing --help.
