Regression introduced by 801c920e95.
Since then, the btrfsSimple subtest of the installer VM test fails with:
Btrfs did not return a path for the subvolume at /
The reason for this is that the output for "btrfs subvol show" has
changed between version 4.8.2 and 4.13.1.
For example the output of "btrfs subvol show /" in version 4.8.2 was:
/ is toplevel subvolume
In version 4.13.1, the output now is the following and thus the regular
expressions used in nixos-generate-config.pl and install-grub.pl now
match (which results in the error mentioned above):
/
Name: <FS_TREE>
UUID: -
Parent UUID: -
Received UUID: -
Creation time: -
Subvolume ID: 5
Generation: 287270
Gen at creation: 0
Parent ID: 0
Top level ID: 0
Flags: -
Snapshot(s):
In order to fix this I've changed nixos-generate-config.pl and
install-grub.pl, because both use "btrfs subvol show" in a similar vein,
so the regex for parsing the output now doesn't match anymore whenever
the volume path is "/", which should result in the same behaviour as we
had with btrfs-progs version 4.8.2.
Tested against the btrfsSimple, btrfsSubvols and btrfsSubvolDefault
subtests of the installer VM test and they all succeed now.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
* the keyboard modules in all-hardware.nix are already defaults of
boot.initrd.availableKernelModules
* ide modules, hid_lenovo_tpkbd and scsi_wait_scan have been removed
because they're not available anymore
* i8042 was a duplicate (see few lines abowe)
the systemd.unit(5) discussion of wantedBy and requiredBy is in the
[Install] section, and thus focused on stateful 'systemctl enable'.
so, clarify that in NixOS, wantedBy & requiredBy are still what most
users want, and not to be confused with enabled.
Boot fails when a keyfile is configured for all encrypted filesystems
and no other luks devices are configured. This is because luks support is only
enabled in the initrd, when boot.initrd.luks.devices has entries. When a
fileystem has a keyfile configured though, it is setup by a custom
command, not by boot.initrd.luks.
This commit adds an internal config flag to enable luks support in the
initrd file, even if there are no luks devices configured.
Grub configs include the NixOS version and date they were built, now
systemd can have fun too:
version Generation 99 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-30
version Generation 100 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-30
version Generation 101 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-31
version Generation 102 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-09-01
version Generation 103 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-09-02
version Generation 104 NixOS 17.09beta41.1b8c7786ee, Linux Kernel 4.9.46, Built on 2017-09-02
version Generation 105 NixOS 17.09.git.1b8c778, Linux Kernel 4.9.46, Built on 2017-09-02
The message buffer of the kernel lists
> Please run 'e2fsck -f /dev/disk/by-label/nixos' first.
as the output of the command `resize2fs "$device"`.
This fixesNixOS/nixpkgs#26910.
old version of blkid used to output version information including libblkid version
when invoked with --help parameter
new version does not output libblkid version when invoked with --help parameter
fix is to invoke blkid with -V parameter to output version including libblkid in both cases
* systemd-boot-builder.py: add support for profiles
This will also list the generations of other profiles than `system` in
the boot menu. See the documentation of the `--profile-name` option of
nixos-rebuild for more information on profiles.
* Fix errors introduced by previous commit
Or else `services.udev.packages = [ bcache-tools ]` cannot be used.
To not break bcache in the initrd I'm modifying this in stage-1.nix:
- --replace /bin/sh ${extraUtils}/bin/sh
+ --replace ${bash}/bin/sh ${extraUtils}/bin/sh
Reasoning behind that change:
* If not modifying the /bin/sh pattern in any way, it will also match
${bash}/bin/sh, creating a broken path like
/nix/store/HASH-bash/nix/store/HASH-bash/bin/sh in the udev rule file.
* The addition of /bin/sh was done in 775f381a9e
("stage-1: add bcache support"). It seems somewhat plausible that
no new users have appeared since then and we can take this opportunity
to back out of this change without much fear of regressions.
If there _are_ regressions, they should be in the form of build time
errors, not runtime (boot), due to how the udev rule output is checked
for invalid path references. So low risk, IMHO.
* An alternative approach could be to copy the /bin/sh substitute rule
over to the non-initrd udev rules implementation in NixOS, but I think
this way is better:
- The rules file comes with a working path out of the box.
- We can use more precise pattern matching when modifying the udev
rules for the initrd.
The default font is unreadably small on some hidpi displays. This
makes it possible to specify a TrueType or OpenType font at any point
size, and it will automatically be converted to the format the Grub
uses.
Restructure the nixos-artwork to make it easy to selectively
incorporate other components from upstream without needing to download
the full package.
Until now only the Gnome_Dark wallpaper was included. Add other
wallpapers available in the package repository.
Since fat32 provides little recovery facilities after a crash,
it can leave the system in an unbootable state, when a crash/outage
happens shortly after an update. To decrease the likelihood of this
event sync the efi filesystem after each update.
Someone on IRC wanted to boot Fedora from another disk. While I'm not
too familiar with UEFI booting in conjunction with GRUB2 it took some
time to get it to work.
So in order to safe others from frustration I'm adding this as another
example to the extraEntries option.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This has surfaced since d990aa7163.
The "simpleUefiGummiboot" installer test fails since this commit,
because that commit introduced a small check to verify whether the store
was altered.
While installing NixOS for the first time, the store is usually in
/mnt/nix/store and without the read-only bind mount that's preventing
programs from altering the store.
So after nixos-install is done creating the system closure and setting
it as the active system profile, the bootloader is written from the
closure inside the chroot. The systemd-boot-builder is invoked during
this step, which adds .pyc files for various Python modules of the
Python 3 store path, which in turn invalidates the hash of the Python 3
store path itself.
At the time the system is booted up again, the nix-store is verified and
fails with something like this:
path /nix/store/zvm545rqc4d97caqq9h7344bnd06jhzb-python3-3.5.3 was
modified! expected hash
b2c975f4b8d197443fbb09690fb3f6545e165dd44c9309d7d6df2fce0579ebeb, got
bccca19f39c9d26d857ccf1fb72818b2b817967e6d497a25a1283e36ed0acf01
Running the interpreter with the -B argument prevents Python from
writing those byte code files:
https://docs.python.org/3/using/cmdline.html#cmdoption-B
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This reverts commit c2b56626f1.
It broke creating the manual. I suspect the descriptions are
auto-wrapped by <para> and </para>.
We've been through this already in 3af715af90.
/cc #24978, @zraexy, @Mic92.
The LUKS header can be on another device (e.g. a USB stick). In my case
it can take up to two seconds until the partition on my USB stick is
available (i.e. the decryption fails without this patch). This will also
remove some redundancy by providing the shell function `wait_target` and
slightly improve the output (one "." per second and a success/failure
indication after 10 seconds instead of always printing "ok").
