Using "builtins.currentSystem" doesn't work in pure evaluation mode,
and even when it's explicitly set (which it always is, in
nixos/lib/eval-config.nix), it breaks manual generation because the
manual tries to render the default value.
The change to "NixOS Test Cluster" in #59179 broke startup of existing clusters
that used the previously-default cluster name "Test Cluster":
ERROR 23:00:47 Fatal exception during initialization
org.apache.cassandra.exceptions.ConfigurationException: Saved cluster name Test Cluster != configured name NixOS Test Cluster
Fixes#63388.
This will keep configuration configuring the size of the /boot partition
still build, while showing the deprecation warning.
In 99.9% of cases I assume ignoring the configuration is better, as the
sd-image builder already is pretty opinionated in that matter.
The slack, seemingly, accounted for more than the minimum required for
slack plus the two partitions.
This change makes the gap a somewhat abstracted amount, but is not
configurable within the derivation.
The current FAT32 partition is kept as it is required for the Raspberry
Pi family of hardware. It is where the firmware is kept.
The partition is kept bootable, and the boot files kept in there until
the following commits, to keep all commits of this series individually
bootable.
Up until now, the output has been the same for swap devices and swap
files:
{ device = "/var/swapfile"; }
Whereas for swap *files* it's easier to manage them declaratively in
configuration.nix:
{ device = "/var/swapfile"; size = 8192; }
(NixOS will create the swapfile, and later resize it, if the size
attribute is changed.)
With the assumption that swap files are specified in configuration.nix,
it's silly to output them to hardware-configuration.nix.
This will reduce the confusion at boot, where the only thing visible is
the last message from u-boot; where it looks like the board is
hung, while in reality it's likely resizing partitions.
This will reduce the confusion at boot, where the only thing visible is
the last message from u-boot; where it looks like the Raspberry Pi is
hung, while in reality it's likely resizing partitions.
Fixes the broken metrics evaluation which was caused by a `trace`
warning in stdout which confused `jq` in `pkgs/top-level/metrics.nix`.
Also made the `bind-device` feature optional as suggested after the
merge.
Manual build broken by 79f7f89442, which
is part of pull request #59179 (Fix Cassandra, improve config and
tests).
The issue was just a small error because of an unbalanced <literal/>
tag, so only a "/" was missing :-)
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @aanderse
The the extraConfig variable is added below the domain variable in the
ddclient config file. The domain variable should always be last.
(cherry picked from commit ba0ba6dc79)
If the `seedAddresses` is not set, don't force `SimpleSeedProvider` to
be in `seed_provider`. This could cause problems in a multi-datacenter
deployment when a different seed provider is preferred.
Below that it works but only when supplying a custom password file with
restricted permissions (i.e. outside the nix-store). We can't do that
using an absolute path in the tests.
If you're on a multi user system you don't want to have the password in
the nix-store. With the new jmxRolesFile option you can specify your own
protected file instead.
Seems like you can't have a node as its own seed when it's listening on
an interface instead of an IP. At least the way it was done in the
test doesn't work and I can't figure out any other way than to just
listen on the IP address instead.
Add "bcache" to boot.initrd.availableKernelModules if a bcache device is
detected.
This fixes a problem I've had one too many times: I install NixOS and
forget to add "bcache", resulting in an unbootable machine (until fixed
with Live CD). Now NixOS will do it for me.
It is referenced in various places, but does not work out of the box:
$ nixos-help
/run/current-system/sw/bin/nixos-help: unable to start a web browser; please set $BROWSER
In the user-hidden fallbacks to xdg-open(1) and w3m(1), `nixos-help`
expects tools to be deliberately installed by users.
For default installations and new users in general, this is unlikely to
be the case. Conversely, chances to use `nixos-help` are even higher
in such cases.
Use w3m-nographics by default to ensure documentation is always
available. The documentation browser on ttyS8 already does so, but is
not accessible in every installation, e.g. VMs with only ttyS0 and SSH
available.
This obsoletes including it in the base profile's systemPackages,
so remove the @TODO as done.
Previously each oneshot peer service only ran once and was not
restarted together with the interface unit. Because of this,
defined peers were missing after restarting their corresponding
interface unit.
Co-Authored-By: Franz Pletz <fpletz@fnordicwalking.de>
This enhances #61423, which removed the gating of desktop-managers from
being linked to the xserver's state.
This, though, brought in xterm into all systems, even those without X
servers.
This change sets the *default* of the xterm desktop-manager to the state
of the xserver, keeping it enabled by default as a sane fallback.
The xterm desktop-manager can still be enabled or disabled as needed,
without it being affected by xserver's state.
This is needed for tcrypt and the benchmark subcommand. If enabled,
it is also used to unlock LUKS2 volumes and therefore the kernel modules
providing this feature need to be available in our initrd.
Fixes#42163. #54019.
This is a simple exporter which exports the information
provided by `wg show all dump` to prometheus.
Co-authored-by: Franz Pletz <fpletz@fnordicwalking.de>
This can lead to unnecessary failures if the kernel module is already
loaded:
Jun 06 12:38:50 chef bglisn9bz0y5403vdw9hny0ij43r41jk-unit-script-wireguard-wg0-start[13261]: modprobe: FATAL: Module wireguard not found in directory /run/booted-system/kernel-modules/lib/modules/4.19.36
Same as zfsUnstable for the moment.
We still keep the zfsUnstable expression as we likely
need it in the near future again.
Also remove spl since it is no longer needed.
See https://github.com/NixOS/nixpkgs/issues/15747. Previously this module was called `<unknown-file>`
in error messages, now it is called a bit more close to real:
```
module at /home/danbst/dev/nixpkgs/nixos/modules/virtualisation/containers.nix:470
```
Types are now specified for all options.
The fixed uid and gid for the avahi user have been removed
and the user avahi is now in the group avahi.
The the generic opening of the firewall for UDP port 5353 is
now optional, but still defaults to true.
The option `extraServiceFiles` was added to specify avahi
service definitions, which are then placed in `/etc/avahi/services`.
The geoclue module now lets us set application config. This should make
it more robust in desktop environments that don't define a geoclue
agent.
Fixes#45994.
The geoclue module now lets us set application config. This should make
it more robust in environments that don't provide a geoclue agent.
Fixes#44725.
We set stateVersion to `mkDefault 18.03` in
`nixos/modules/testing/test-instrumentation.nix` and in
`modules/installer/cd-dvd/installation-cd-base.nix`.
Accessing the stateVersion in the module system from within the tests
results in the following error:
> The unique option `system.stateVersion' is defined multiple times, in
> `nixpkgs/nixos/modules/installer/cd-dvd/installation-cd-base.nix' and
> `nixpkgs/nixos/modules/testing/test-instrumentation.nix'.
There are other tests that use it as well. Namely the radicale test also
verifies behaviour between state versions is as expected. It switches a
package default value. Others switched on the state directory default.
It seems like having the timesyncd switch as part of every rendered
activationScript might cause this weird error.
Removing this line seems like a reasonable thing to do since we actually
set the default to the very same value in the module system. This line
should have been no-op besides the issue that we've two statements
setting it in this very specific case.
The autoLuks module is not really compatible with the updated systemd
version anymore. We started dropping NixOS specific patches that caused
unwanted side effects that we had to work around otherwise.
This change points users towards the relevant PR and spits out a bit of
information on how to deal with the situation.
Somewhen between systemd v239 and v242 upstream decided to no longer run
a few system services with `DyanmicUser=1` but failed to provide a
migration path for all the state those services left behind.
For the case of systemd-timesync the state has to be moved from
/var/lib/private/systemd/timesync to /var/lib/systemd/timesync if
/var/lib/systemd/timesync is currently a symlink.
We only do this if the stateVersion is still below 19.09 to avoid
starting to have an ever growing activation script for (then) ancient
systemd migrations that are no longer required.
See https://github.com/systemd/systemd/issues/12131 for details about
the missing migration path and related discussion.
With systemd v242 using the `Gateway` attribute of the `[Network]`
section will lead to "onlink" routes on all the device that are matched
by the default configuration (typically all devices) causing multiple
default routes (even on localhost).
We can only avoid that - while keeping our default route option - when
we mark the route as explicitly not on link. Only gateways that are
within a subnet of one of the assigned interface addresses will be
installed into the routing table.
With the systemd update to v242 five lines are not longer sufficient to
verify that the storage was verified. In order to reduce future test
failures increasing it to 10 lines sounds like a sane amount.
The udev rules we are shipping no longer work with systemd v242 and were
remove upstream some time ago. It seems like the entire renaming is now
done in C and not in the udev rules.
Remove the btsync module. Bittorrent Sync was renamed to Resilio Sync in
2016, which is supported by the resilio module. Since Resilio Sync had
some security updates since 2016, it is not safe to run Bittorrent Sync
anymore.
Partially reapplies 35af6e3605
buildPackages need to be used only for image builders.
Otherwise, the bootloader builder may be setup using the wrong arch,
rendering it unusable
mysql already has its socket path hardcoded to to
/run/mysqld/mysqld.sock.
There's not much value in making the pidDir configurable, which also
points to /run/mysqld by default.
We only seem to use `services.mysql.pidDir` in the wordpress startup
script, to wait for mysql to boot up, but we can also simply wait on the
(hardcoded) socket location too.
A much nicer way to accomplish that would be to properly describe a
dependency on mysqld.service. This however is not easily doable, due to
how the apache-httpd module was designed.
As we don't need to setup data directories from ExecStartPre= scripts
anymore, which required root, but use systemd.tmpfiles.rules instead,
everything can be run as just the mysql user.
define commands like "waiting for the mysql socket to appear" or "setup
initial databases" in a let expression, so the main control flow becomes
more readable.
We need to keep using `RuntimeDirectory=mysqld`, which translates to
`/run/mysqld`, as this is used for the location of the file socket, that
could differ with what is configured via `cfg.pidDir`.
Before, changing any peers caused the entire WireGuard interface to
be torn down and rebuilt. By configuring each peer in a separate
service we're able to only restart the affected peers.
Adding each peer individually also means individual peer
configurations can fail, but the overall interface and all other peers
will still be added.
A WireGuard peer's internal identifier is its public key. This means
it is the only reliable identifier to use for the systemd service.
5404595b55 relocated code but kept
one backslah too many, leading to
$ tmux
error creating /run/user/$(id -u)/tmux-1000 (No such file or directory)
/run/user/$UID/ is created by pam_systemd(3) which also populates
XD_RUNTIME_DIR with that value.
Alternatively, TMUX_TMPDIR might simply default to XDG_RUNTIME_DIR
without providing the same directory yet again as default string in
parameter substitution, however such behaviour change is subject to
another patch.
In fact, with `security.polkit.enable = false` systemd_logind(8) fails
to start and /run/user/$UID/ is never created for unprivileged users
in proper login sessions; XDG_RUNTIME_DIR would consequently not be
set either.
Removing the fallback to /run/user/$UID/ would have caused TMUX_TMPDIR
to be empty, which in turn would lead tmux(1) to use /tmp/. This
effectively breaks the idea of isolated sockets entirely while hiding
errors from the user.
When calling reload, bird attempts to reload the file that was given in
the command line. As the change of ${configFile} is never picked up,
bird will just reload the old file.
This way, the configuration is placed at a known location and updated.
The clickshare-csc1 package brings a udev rule file
to grant access to the ClickShare dongle if connected.
This module provides an option to install that rule file.
Only users in the "clickshare" users group have access.
We differentiate between modules and baseModules in the
VM builder for NixOS tests. This way, nesting.children, eventhough
it doesn't inherit from parent, still has enough config to
actually complete the test. Otherwise, the qemu modules
would not be loaded, for example, and a nesting.children
statement would not evaluate.
* compton-git: 5.1-rc2 -> 6.2
vsync is now a boolean option, see:
https://github.com/yshui/compton/pull/130
menu-opacity is deprecated and there's a warning that says:
Please use the wintype option `opacity` of `popup_menu` and
`dropdown_menu` instead.
* nixos/compton: Keep vSync option backwards compatible
The new upstream option tries to make the best choice for the user.
Therefore the behaviour should stay the same with this backwards
compatibility patch.
* compton-git: Remove DRM option
It's deprecated and shouldn't be used.
https://github.com/yshui/compton/pull/130/files#r285505456
* compton-git: Remove new_backends option
Was removed in "Let old/new backends co-exist"
b0c5db9f5aa500dc3568cc6fe68493df98794d4d
* compton: 0.1_beta2.5 -> 6.2
Drop the legacy, unmaintained version and use the fork for real.
Fix#61859.
Assertion fails when a Google Compute Engine image is built, because
now choices of filesystem types are restricted to `f2fs` and `ext` family if
auto-resizing is enabled.
This change will pin the filesystem used on such an image to be `ext4` for now.
A new internal option `hardware.opengl.setLdLibraryPath` is added which controls if `LD_LIBRARY_PATH` should be set to `/run/opengl-driver(-32)/lib`. It is false by default and is meant to be set to true by any driver which requires it. If this option is false, then `opengl.nix` and `xserver.nix` will not set `LD_LIBRARY_PATH`.
Currently Mesa and NVidia drivers don't set `setLdLibraryPath` because they work with libglvnd and do not override libraries, while `amdgpu-pro`, `ati` and `parallels-guest` set it to true (the former two really need it, the last one doesn't build so is presumed to).
Additionally, the `libPath` attribute within entries of `services.xserver.drivers` is removed. This made `xserver.nix` add the driver path directly to the `LD_LIBRARY_PATH` for the display manager (including X server). Not only is it redundant when the driver is added to `hardware.opengl.package` (assuming that `hardware.opengl.enable` is true), in fact all current drivers except `ati` set it incorrectly to the package path instead of package/lib.
This removal of `LD_LIBRARY_PATH` could break certain packages using CUDA, but only those that themselves load `libcuda` or other NVidia driver libraries using `dlopen` (not if they just use `cudatoolkit`). A few have already been fixed but it is practically impossible to test all because most packages using CUDA are libraries/frameworks without a simple way to test.
Fixes#11434 if only Mesa or NVidia graphics drivers are used.
Back in 2013, update-mime-database started using fdatasync() to write out
its changes after processing each file in /share/mime, with the reasoning
that a corrupted database from an interruption midway would be
problematic for applications[1]. Unfortunately, this caused a
significant regression in the time required to run update-mime-database:
commonly from under a second to half a minute or more.
This delay affects the time required to build system-path on NixOS, when
xdg.mime.enable is true (the default). For example, on one of my systems
system-path builds in ~48 seconds, 45 of which are update-mime-database.
This makes rapidly building new system configurations not fun.
This commit disables the calls to fdatasync(). update-mime-database
checks an environment variable, PKGSYSTEM_ENABLE_FSYNC, to determine
whether it should sync, and we can set this to false. system-path
already only has whatever filesystem commit guarantees that the Nix
builder provides. Furthermore, there is no risk of a failed MIME
database update messing up existing packages, because this is Nix.
(This issue was also reported at and discussed by Debian, Red Hat, and
Gentoo at least.)
[1] https://bugs.freedesktop.org/show_bug.cgi?id=70366
This is actually very useful. Allows you to test switch-to-configuration
nesting.children is still currently still broken as it will throw
away 'too much' of the config, including the modules that make
nixos tests work in the first place. But that's something for
another time.
As a oneshot service, if the startup failed it would never be attempted again.
This is problematic when peer's addresses require DNS. DNS may not be reliably available at
the time wireguard starts. Converting this to a simple service with Restart
and RestartAfter directives allows the service to be reattempted, but at
the cost of losing the oneshot semantics.
Signed-off-by: Maximilian Bosch <maximilian@mbosch.me>
Passwords should not be stored in plain text by default. On existing
installations the next time a users user accounts will automatically
be upgraded from plain to hashed one-by-one as they log in.
With `sshd -t` config validation for SSH is possible. Until now, the
config generated by Nix was applied without any validation (which is
especially a problem for advanced config like `Match` blocks).
When deploying broken ssh config with nixops to a remote machine it gets
even harder to fix the problem due to the broken ssh that makes reverts
with nixops impossible.
This change performs the validation in a Nix build environment by
creating a store path with the config and generating a mocked host key
which seems to be needed for the validation. With a broken config, the
deployment already fails during the build of the derivation.
The original attempt was done in #56345 by adding a submodule for Match
groups to make it harder screwing that up, however that made the module
far more complex and config should be described in an easier way as
described in NixOS/rfcs#42.
Some packages like `ibus-engines.typing-booster` require the dictionary
`fr_FR.dic` to provide proper support for the french language.
Until now the hunspell package set of nixpkgs didn't provide this
dictionary. It has been recommended to use `fr-moderne` as base and link
`fr_FR.dic` from it as done by other distros such as ArchLinux.
See https://github.com/NixOS/nixpkgs/issues/46940#issuecomment-423684570Fixes#46940
