The ConditionFileNotEmpty override patch wasn't correct for stage1, which
does have the modules in /lib. So, remove the patch and set
the right path with overrides in the final system.
Also, make sure systemd-tmpfiles-setup-dev is pulled in to create
all the necessary symlinks.
We want Openldap clients to load /etc/ldap.conf at runtime, not
${pkgs.openldap}/etc/ldap.conf which is always a sample config.
Pass sysconfdir=/etc at compile time, so that /etc/krb5.conf is embedded
in the library as the path of its config file.
Pass sysconfdir=${out}/etc at install time, so that the sample configs
and schema files are correctly included in the build output.
This hack works because the Makefiles are not smart enough to notice
that the sysconfdir variable has changed across invocations -- because
nobody ever writes their Makefiles to be that smart. :-)
Fixes#181937.
Fix bug where pam_u2f options would be partially included in other pam.d
files if the module was enable for specific services, resulting in
broken configuration.
If a host key file is a symlink pointing to an as of yet non-existent
file, we don't want to remove it, but instead follow the symlink and
create the file at that location.
See https://github.com/nix-community/impermanence/issues/101 for more
information on the issue the original behavior creates.
Within a dual VM test-setup a strange behaviour was observed.
The two VMs are connected via one vde_switch instance
(instancevirtualisation.vlans = [ 1 ]; IMO a bad attribute name for
switch instances, has nothing to do with VLANs in sense of 802.1Q).
A ping on the base interface (eth1) works, but not on VLAN
subinterfaces (vlan1@eth1). A tcpdump of eth1 includes the ARP requests
tagged with the subinterfaces VLAN ID, but responses seems not to pass
the vde_switch. This works fine if performed on the base interface.
Putting the vde_switch in hub mode results in flooding
traffic to all vde_switch ports. This results in a expected behaviour
and a ping on a VLAN subinterface works as expected.
Signed-off-by: Philippe Schaaf <philippe.schaaf@secunet.com>
airsonic_is_up should return a bool, but machine.succeed returns a
string causing testScriptWithTypes to fail. This is fixed by executing
the cmd with machine.execute and checking the status code.
We want Openldap clients to load /etc/ldap.conf at runtime, not
${pkgs.openldap}/etc/ldap.conf which is always a sample config.
Pass sysconfdir=/etc at compile time, so that /etc/krb5.conf is embedded
in the library as the path of its config file.
Pass sysconfdir=${out}/etc at install time, so that the sample configs
and schema files are correctly included in the build output.
This hack works because the Makefiles are not smart enough to notice
that the sysconfdir variable has changed across invocations -- because
nobody ever writes their Makefiles to be that smart. :-)
Fixes#181937.
Setting `cgroup-driver=systemd` was originally necessary to match with
docker, else the kubelet would not start (#111835)
However, since then, docker support has been dropped from k3s (#177790).
As such, this option is much less necessary.
More importantly, it now seems to be actively causing issues. Due to an
upstream k3s bug, it's resulting in the kubelet and containerd having
different cgroup drivers, which seems to result in some difficult to
debug failure modes.
See
https://github.com/NixOS/nixpkgs/issues/181790#issuecomment-1188840862
for a description of this problem.
Removing this flag entirely seems reasonable to me, and it results in
k3s working again on my machine.
The group configuration parameter allow to share access to yggdrasil
control socket with the users in the system. In the version we propose,
it is null by default so that only root can access the control socket,
but let user create their own group if they need.
Remove User= durective in systemd unit. Should a user with the specified
name already exist in the system, it would be used silently instead of a
dynamic user which could be a security concern.
Since version 0.4 Yggdrasil works again using systemd's DynamicUser option.
This patch reenables it to improve security.
We tested this with both persistent and non-persistent keys. Everything
seems to work fine.
The option `services.jira.sso.applicationPassword` has been replaced by
`applicationPasswordFile` that needs to be readable by the `jira`-user
or group.
The new `crowd.properties` is created on startup in `~jira` and the
secret is injected into it using `replace-secret`.
Rely on services.jenkins-job-builder to reload the configuration instead
of doing that manually in the test.
(If this had been implemented already, it would have caught the bug
fixed by the parent commit, that services.jenkins-job-builder failed to
reload jenkins config from disk.)
The current authentication code is broken against newer jenkins:
jenkins-job-builder-start[1257]: Asking Jenkins to reload config
jenkins-start[789]: 2022-07-12 14:34:31.148+0000 [id=17] WARNING hudson.security.csrf.CrumbFilter#doFilter: Found invalid crumb 31e96e52938b51f099a61df9505a4427cb9dca7e35192216755659032a4151df. If you are calling this URL with a script, please use the API Token instead. More information: https://www.jenkins.io/redirect/crumb-cannot-be-used-for-script
jenkins-start[789]: 2022-07-12 14:34:31.160+0000 [id=17] WARNING hudson.security.csrf.CrumbFilter#doFilter: No valid crumb was included in request for /reload by admin. Returning 403.
jenkins-job-builder-start[1357]: curl: (22) The requested URL returned error: 403
Fix it by using `jenkins-cli` instead of messing with `curl`.
This rewrite also prevents leaking the password in process listings. (We
could probably do it without `replace-secret`, assuming `printf` is a
shell built-in, but this implementation should be safe even with shells
not having a built-in `printf`.)
Ref https://github.com/NixOS/nixpkgs/issues/156400.
Instead of hard-coding a single `configFile` for
`privacyidea-ldap-proxy.service` which is pretty unmergable with other
declarations it now uses a RFC42-like approach. Also to make sure that
secrets can be handled properly without ending up in the Nix store, it's
possible to inject secrets via envsubst
{
services.privacyidea.ldap-proxy = {
enable = true;
environmentFile = "/run/secrets/ldap-pw";
settings = {
privacyidea.instance = "privacyidea.example.org";
service-account = {
dn = "uid=readonly,ou=serviceaccounts,dc=example,dc=org";
password = "$LDAP_PW";
};
};
};
}
and the following secret file (at `/run/secrets`):
LDAP_PW=<super-secret ldap pw>
For backwards-compat the old `configFile`-option is kept, but it throws
a deprecation warning and is mutually exclusive with the
`settings`-attrset. Also, it doesn't support secrets injection with
`envsubst` & `environmentFile`.
Wait until home-assistant is fully reloaded or restarted to spot
possible errors during startup.
Swap out bluetooth_tracker for esphome, since the bluetooth tracker
causes errors, when it does not find a bluetooth device.
Drop mosquitto from the environment. It wasn't used since the 2022.3.0
release when MQTT stopped being configurable from the YAML config.
It has been like this since the module was added, but it hasn't caused
problems because greetd assumes a default user of "greeter"[1] when it
isn't found anyway
[1]: d700309623/item/greetd/src/config/mod.rs (L127)
Suppose you want to provide a LDAP-based directory search to your
homeserver via a service-user with a bind-password. To make sure that
this doesn't end up in the Nix store, it's now possible to set a
substitute for the bindPassword like
services.mxisd.extraConfig.ldap.connection = {
# host, bindDn etc.
bindPassword = "$LDAP_BIND_PW";
};
and write the actual secret into an environment file that's readable for
`mxisd.service` containing
LDAP_BIND_PW=<your secret bind pw>
and the following setting in the Nix expression:
services.mxisd.environmentFile = "/runs/ecrets/mxisd";
(cherry picked from commit aa25ce7aa1a89618e4257fd46c7d20879f54c728)
Without this change, configurations like
```nix
fileSystems."/path/to/bindMountedDirectory" = {
device = "/path/to/originalDirectory";
options = [ "bind" ];
};
```
will lead to a warning message in `dmesg`:
```
systemd-fstab-generator: Checking was requested for "/path/to/originalDirectory", but it is not a device.
```
This happens because the generated /etc/fstab entry contains a non-zero fsck pass number, which doesn't make sense for a bind mount.
This reverts commit 7141ab0f0b.
reverting this for now to unblock staging-next
{UNKNOWN}: aggregate job ‘tested’ failed with the error: nixpkgs.tests.packageTestsForChannelBlockers.curl.withCheck.x86_64-linux: does not exist
at /nix/store/9i92scfqz5idhmjrmjnqhrvjgyydzfns-hydra-perl-deps/lib/perl5/site_perl/5.34.0/Catalyst/Model/DBIC/Schema.pm line 526
...by using `replace-secret` instead of `sed` when injecting the
password into the ddclient config file. (Verified with `execsnoop`.)
Ref https://github.com/NixOS/nixpkgs/issues/156400.
* Update to the latest upstream version of pass-secret-service that includes
systemd service files.
* Add patch to fix use of a function that has been removed from the Python
Cryptography library in NixOS 22.05
* Install systemd service files in the Nix package.
* Add NixOS test to ensure the D-Bus API activates the service unit.
* Add myself as a maintainer to the package and NixOS test.
* Use checkTarget instead of equivalent custom checkPhase.
The `bash` binary is needed for running some plugins, notably the alarm notify plugins. If the binary isn't in the path, alarms notifications aren't sent and the netdata error log instead contains `/usr/bin/env: 'bash': No such file or directory`.
The FUSE mount functionality of IPFS was broken by the update to v0.13.0, so disable it. Hopefully it will be fixed soon.
See https://github.com/ipfs/kubo/issues/9044.
The ${opt.*} syntax will print the full path when NixOS is used
as a submodule.
nixpkgs.system / nixpkgs.localSystem must not be read by any
other module because its meaning is ambiguous in cross vs
non-cross contexts. hostPlatform is generally what you need.
*Where* you build something generally doesn't matter in a
system _configuration_ context like NixOS.
Due to lack of maintenance. It is not compatible with the default
Python version (due to the tornado 5) dependency, and doesn't look
like it will be any time soon.
Install Parallel Tools updated for version 17 of Parallels for macOS. This
fixes clipboard sharing, so that copy and paste works between the host
macOS and the guest NixOS VM. Support for guests on M1 Apple Silicon-based
Macs (aarch64-linux) is also added.
Co-authored-by: Paul Smith <paulsmith@gmail.com>
Co-authored-by: Weijia Wang <9713184+wegank@users.noreply.github.com>
- support librewolf in the firefox nixos test
- use the correct binary name
- ensure autoplay is always on for the audio test, since
librewolf disables it by default
This was broken by a bad merge, where the same attribute was added
separately in two different places.
Fixes: ef895f6b43 ("Merge pull request #173239 from jojosch/mjolnir-update")
Since 831024e2b9 ("nixos/dhcpcd: assert if privSep && alternative
malloc"), this test has an assertion failure because dhcpcd (with
privsep enabled) is not compatible with the allocator used by the
hardened profile.
Since it's unclear[1] what to do about this for the hardened profile,
I propose doing the simplest thing possible to make the test eval,
which is to just disable dhcpcd privsep. It's very inconvenient when
trying to refactor the NixOS test infrastructure to have a test that
doesn't evaluate. Once the correct solution is found for using dhcpcd
with privsep with the hardened profile, this patch can be reverted.
[1]: https://github.com/NixOS/nixpkgs/pull/157430
This commit fixes the following error:
Failed assertions:
- Setting xdg.portal.enable to true requires a portal implementation in xdg.portal.extraPortals such as xdg-desktop-portal-gtk or xdg-desktop-portal-kde.
I was under the impression that setting `services.redis.servers.<name>.save = []` would disable RDB persistence as no schedule would mean no persistence. However since the code did not handle this case specially it actually results in no `save` setting being written and the internal Redis default is used.
This patch handles the empty case to disable RDB persistence.
Disabling RDB persistence is useful in a number of scenarios:
1. Using Redis in a pure-cache mode where persistence is not desired.
2. When using the (generally superior) AOF persistence mode this file is never read so there is little point to writing it.
3. When saving is handled manually
For more information see https://redis.io/docs/manual/persistence/
This is a breaking change as the user may have been relying on `[]` using Redis defaults. However I believe that updating the behaviour for the next release is beneficial as IMHO it is less surprising and does what the user would expect. I have added release notes to warn about this change.
* nixos/vault: add option to start in dev mode.
This is not only useful for nixos tests i.e. when testing vault agent
setups but also when playing around with vault in local setups. In our
tests we can now make use of this option to test more vault features.
i.e. adding this feature has uncovered the need for a `StateDirectory`.
* Update nixos/modules/services/security/vault.nix
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Jonas Chevalier <zimbatm@zimbatm.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>