When installing a fresh NixOS system it occasionally happens that you
encounter issues that are rather hard to track down since
`nixos-install(8)` doesn't provide any debugging flags.
This patch adds `-L` to force `nix build` to display the build-log on
stderr and `-v` to increase the log-level of Nix.
1. This makes aggregates of submodules (including the very important
"nixos-option users.users.<username>" case) behave the same way as any
other you-need-to-keep-typing-to-get-to-an-option-leaf (eg:
"nixos-option environment").
Before e0780c5:
$ nixos-option users.users.root
error: At 'root' in path 'users.users.root': Attribute not found
An error occurred while looking for attribute names. Are you sure that 'users.users.root' exists?
After e0780c5 but before this change, this query just printed out a raw
thing, which is behavior that belongs in "nix eval", "nix-instantiate
--eval", or "nix repl <<<":
$ nixos-option users.users.root
{
_module = {
args = { name = "root"; };
check = true;
};
createHome = false;
cryptHomeLuks = null;
description = "System administrator";
...
After this change:
$ nixos-option users.users.root
This attribute set contains:
createHome
cryptHomeLuks
description
extraGroups
group
hashedPassword
...
2. For aggregates of other types (not submodules), print out the option
that contains them rather than printing an error message.
Before:
$ nixos-option environment.shellAliases.l
error: At 'l' in path 'environment.shellAliases.l': Attribute not found
An error occurred while looking for attribute names. Are you sure that 'environment.shellAliases.l' exists?
After:
$ nixos-option environment.shellAliases.l
Note: showing environment.shellAliases instead of environment.shellAliases.l
Value:
{
l = "ls -alh";
ll = "ls -l";
ls = "ls --color=tty";
}
...
When running e.g. `nixos-option users.users.ma27`, the evaluation breaks
since `ma27` is the attribute name in `attrsOf (submodule {})`, but not
a part of the option tree and therefore breaks with the following
errors:
```
error: At 'ma27' in path 'users.users.ma27': Attribute not found
An error occurred while looking for attribute names. Are you sure that 'users.users.ma27' exists?
```
This happens since the option evaluator expects that either the option
exists or the option is a submodule and the "next" token in the
attribute path points to an option (e.g. `users.users.ma27.createHome`).
This patch checks in the `Attribute not found` condition if the attribute-path
actually exists in the config tree. If that's true, a dummy-attrset is created
which contains `{_type = "__nixos-option-submodule-attr";}`, in that case, the
entire entry of the submodule will be displayed.
Add --use-remote-sudo option. When set, remote commands will be prefixed
with 'sudo'. This allows using sudo remotely _without_ having to use
sudo locally (when using --build-host/--taget-host).
Automated consumers can use 'sed 1d' or similar to remove this header.
This probably makes this output *easier* to consume correctly. Having
this header show up in consumers' terminal or log output is probably not
useful, but hiding it without hiding all error messages would have been
more troublesome that just stripping it from stdout.
I.e., previously, unsophisticated use would show undesired output:
$ some-other-tool
This attribute set contains:
This attribute set contains:
This attribute set contains:
This attribute set contains:
<Actual some-other-tool output>
The simplest way to hide this undesired output would have been
nixos-option ... 2>/dev/null, which would hide all error messages.
We do not wish to encourage that.
Correct use would have been something like:
nixos-option ... 2> >( grep --line-buffered -v 'This attribute set contains:')
After this change, correct use is simpler:
nixos-option ... | sed 1d
or
nixos-option ... | sed '1/This attribute set contains:/d'
if the caller don't know if this invocation of nixos-option will yield
an attribute listing or an option description.
Switch from convention "appease clang-tidy --checks='*'" to
"References are like non-nullptr pointers". The clang-tidy check
"google-runtime-references" complains about non-const reference
arguments, but this is not a convention used in Nix.
Switch from convention "appease clang-tidy --checks='*'" to
"References are like non-nullptr pointers". The clang-tidy check
"google-runtime-references" complains about non-const reference
arguments, but this is not a convention used in Nix.
Switch from convention "appease clang-tidy --checks='*'" to
"References are like non-nullptr pointers". The clang-tidy check
"google-runtime-references" complains about non-const reference
arguments, but this is not a convention used in Nix.
I don't think this matters. As long as one or the other of these is
a std::string, I get an operator== that looks at content rather than
pointer equality. I picked casting the constant over casting the dynamic
thing in hopes that the compiler would have a better chance at optimizing
away any runtime cost.
Deferring to reviewer.
This is important because this contains some code copied from nix (as an
interim expediency until that functionality can be exported via nix's
API). The license specified here must be compatible with this borrowing.
Select the same license that nix is released under: lgpl2Plus.
Specifically, with
clang-format --style='{ IndentWidth: 4, BreakBeforeBraces: Mozilla, ColumnLimit: 120, PointerAlignment: Middle }'
which was the clang-format invocation that produced the fewest diffs on
the nix source out of ~20 that I tried.
Also add --all, which shows the value of all options. Diffing the --all
output on either side of contemplated changes is a lovely way to better
understand what's going on inside nixos.
This adds support for deploying to remote hosts without being root:
sudo nixos-rebuild --target-host non-root@host
Without this change, only root@host is able to deploy.
The idea is that if the local command is run with sudo, so should the
remote one, thus there is no need for adding any CLI options.
I have `users.defaultUserShell = pkgs.fish;` set on my server and when I ran `nixos-rebuild switch --target-host …`, the command failed with the following error:
fish: Unsupported use of '='. To run 'nix-store' with a modified environment, please use 'env PATH=… nix-store…'
That is because fish requires env to set environment variables for a program. It should also work on other shells.
This sets networking.useDHCP to false and for all interfaces found the
per-interface useDHCP to true. This replicates the current default
behaviour and prepares for the switch to networkd.
Up until now, the output has been the same for swap devices and swap
files:
{ device = "/var/swapfile"; }
Whereas for swap *files* it's easier to manage them declaratively in
configuration.nix:
{ device = "/var/swapfile"; size = 8192; }
(NixOS will create the swapfile, and later resize it, if the size
attribute is changed.)
With the assumption that swap files are specified in configuration.nix,
it's silly to output them to hardware-configuration.nix.
Add "bcache" to boot.initrd.availableKernelModules if a bcache device is
detected.
This fixes a problem I've had one too many times: I install NixOS and
forget to add "bcache", resulting in an unbootable machine (until fixed
with Live CD). Now NixOS will do it for me.
cross-compilation of `btrfs-tools` is broken, and this usually needless dependency of each system closure on `btrfs-tools` prevents cross-compilation of whole system closures
If setting a root password using the `passwd` call in the
`nixos-install` script fails, it should be explained how set it manually
to ensure that nobody gets accidentally locked out of the system.
If our old Nix can’t evaluate the Nixpkgs channel, try the fallback
from the new channel /first/. That way we can upgrade Nix to a newer
version and support breaking changes to Nix (like seen in the upgrade
o Nix 2.0).
This change should be backported to older NixOS versions!
This hasn't been needed for a long time, even when `mutableUsers =
false`. Setting a uid manually is potentially risky since it could
collide with non-declarative user accounts. (We do check for
collisions between declarative accounts.)
Also simplified the argument parsing to write all currently supported
CLI options into a bash array and pass this to `nix-build`.
Also documented `--option` usage in the corresponding manpage.
I've been asked, on numerous occasions, by my students and others, how
to 'sudo' on NixOS.
Of course new users could read up in the manual on how to do that, or we
could make it more accessible for them by simply making it visible in
the default `configuration.nix` file.
Additionally, as raised in [1], replacing `guest` with something more
recognizable could be potentially beneficial to new users. I've
opted for `jane` for now.
[1]: https://github.com/NixOS/nixpkgs/pull/54519#issuecomment-457012223
There are situations where several filesystems reside on a single encrypted LUKS
device (e.g. when using BTRFS subvolumes).
Simply generating a `boot.init.luks.devices.NAME.device` entry for each mounted
filesystem will result in an error later when evaluating the nix expression in
`hardware-configuration.nix`.
Since nix 2.0 the no-build-hook option was replaced by the builders options
that allows to override remote builders ad-hoc.
Since it is useful to disable remote builders updating nixos without network,
this commit reintroduces the option.
This adds a NixOS option for setting the CPU max and min frequencies
with `cpufreq`. The two options that have been added are:
- `powerManagement.cpufreq.max`
- `powerManagement.cpufreq.min`
It also adds an alias to the `powerManagement.cpuFreqGovernor` option as
`powerManagement.cpufreq.governor`. This updates the installer to use
the new option name. It also updates the manual with a note about
the new name.
Previously I got the following error message:
```
error: opening file '/home/ma27/Projects/nixpkgs/nixos/modules/installer/default.nix': No such file or directory
```
Probably related to 6c68fbd4e1.
