From reading the source I'm pretty sure it doesn't support multiple Yubikeys, hence
those options are useless.
Also, I'm pretty sure nobody actually uses this feature, because enabling it causes
extra utils' checks to fail (even before applying any patches of this branch).
As I don't have the hardware to test this, I'm too lazy to fix the utils, but
I did test that with extra utils checks commented out and Yubikey
enabled the resulting script still passes the syntax check.
Also reuse common cryptsetup invocation subexpressions.
- Passphrase reading is done via the shell now, not by cryptsetup.
This way the same passphrase can be reused between cryptsetup
invocations, which this module now tries to do by default (can be
disabled).
- Number of retries is now infinity, it makes no sense to make users
reboot when they fail to type in their passphrase.
Some modules of cloud-init can cope with a network not immediately
available (notably, the EC2 module), but some others won't retry if
network is not available (notably, the Cloudstack module).
network.target doesn't give much guarantee about the network
availability. Applications not able to start without a fully
configured network should be ordered after network-online.target.
Also see #44573 and #44524.
We override the ESP mount point in the config file /etc/fwupd/uefi.conf
(available since version 1.0.6), as it is set to a path in the nix store
during build time.
Tests are disabled as it needs /etc/os-release, which is not available
when building with sandboxing enabled.
In the last year `programs.oh-my-zsh` gained more complexity and since
the introduction of features like `customPkgs` which builds a
`ZSH_CUSTOM` path from a sequence of derivation a documentation may be
fairly helpful to make the knowledge how to use the module and how to
package new ZSH plugins visible.
See https://github.com/NixOS/nixpkgs/pull/43282#issuecomment-410770432
This reverts a change applied in PR #18491. When interfaces are
configured by DHCP (typical in a cloud environment), ordering after
network.target cause trouble to applications expecting some network to
be present on boot (for example, cloud-init is quite brittle when
network hasn't been configured for `cloud-init.service`) and on
shutdown (for example, collectd needs to flush metrics on shutdown).
When ordering after network.target, we ensure applications relying on
network.target won't have any network reachability on boot and
potentially on shutdown.
Therefore, I think ordering before network.target is better.
If multiple third-party modules shall be used for `oh-my-zsh` it has to
be possible to create another env which composes all the packages.
Now it can be done like this:
```
{ pkgs, ... }:
{
programs.zsh.enable = true;
programs.zsh.ohMyZsh = {
enable = true;
customPkgs = with pkgs; [
lambda-mod-zsh-theme
nix-zsh-completions
];
theme = "lambda-mod";
plugins = [ "nix" ];
};
}
```
Please keep in mind that this is not compatible with
`programs.zsh.ohMyZsh.custom`, only one of these options can be used
ATM.
Each package should store its outputs into
`$out/share/zsh/<output-name>`. Completions (and ZSH-only) extensions
should live in the `fpath` (`$out/share/zsh/site-functions`), plugins in
`.../plugins` and themes in `.../themes` (please refer to
fdb6bf6ed68c2f089ae6c729dfeaa3eddea2ce6a and 406d64aad162b3a4881747be4e24705fb5182573).
All scripts in `customPkgs` will be linked together using `linkFarm` to
provide a single directory for all scripts from all derivations in
`customPkgs` as suggested in https://github.com/NixOS/nixpkgs/pull/43282#issuecomment-410396365.
The web_access.patch would no longer apply.
It disabled a check that required the static files
for the web UI to be owned by the user the daemon runs as
(not root, so it doesn't work well with nix).
Besides updating netdata, this commit removes that patch,
changes the netdata service config to set the "web files owner/group"
option to "root" and adds a test that checks that the web UI is being served.
This allows the web files to be owned by root without patching.
Broke evaluation of the nixos options.
The option `services.dysnomia' defined in `.../nixos/modules/rename.nix' does not exist.
This reverts commit 5c897b4eff.
The server is not verified over the git:// transfer protocol. If you
clone a repository over git://, you should check if the latest commit's
hash is correct.
On the other hand, https:// will always verify the server automatically,
using certificate authorities.
Use nixos-fw chain instead of INPUT so that the rules don't keep
stacking everytime the firewall is reloaded.
This also adds a comment to each rule about the associated exporter.
- based on module originally written by @srhb
- complies with available options in cfssl v1.3.2
- uid and gid 299 reserved in ids.nix
- added simple nixos test case
Fixes#30891
* Upgrade `graphite-web`, `carbon` and `whisper` from 1.0.2 -> 1.1.3.
* Replaced the deprecated `pythonPackages.graphite_influxdb` with
`pythonPackages.influxgraph.`
* Renamed `pythonPackages.graphite_web` to `pythonPackages.graphite-web`
to be consistent with the Python package name.
* Replaced the unmaintained `pythonPackages.graphite_pager` with
`pythonPackages.graphitepager`
* Moved all new packages from `python-packages.nix` to
`pkgs/development/python-modules`
Since 4f6df27aee, nix.useSandbox defaults
to true which causes the Nix build within the containers-imperative test
to fail while trying to hardlink files into the chroot:
link("/nix/store/foo", "/nix/store/bar.drv.chroot/nix/store/foo")
= -1 EPERM (Operation not permitted)
The reason this happens is that the hosts store is mounted using 9p and
an overlayfs is mounted on top, so even if we would disable the tmpfs
for the upper directory the hardlink would still cross filesystem
boundaries, which then fails with the above error code.
I haven't yet seen any other test which fails in a similar way, which
might be because building within VM tests is not very common and the
installer tests build in a separate store, so they're not affected.
Signed-off-by: aszlig <aszlig@nix.build>
Issue: https://github.com/NixOS/nix/issues/2324
Cc: @aristidb, @edolstra, @chaoflow, @kampfschlaefer
`ocserv` is a VPN server which follows the openconnect protocol
(https://github.com/openconnect/protocol). The packaging is slightly
inspired by the AUR version
(https://aur.archlinux.org/packages/ocserv/).
This patch initializes the package written in C, the man pages and a
module for a simple systemd unit to run the VPN server. The package
supports the following authentication methods for the server:
* `plain` (mostly username/password)
* `pam`
The third method (`radius`) is currently not supported since `nixpkgs`
misses a packaged client.
The module can be used like this:
``` nix
{
services.ocserv = {
enable = true;
config = ''
...
'';
};
}
```
The option `services.ocserv.config` is required on purpose to
ensure that nobody just enables the service and experiences unexpected
side-effects on the system. For a full reference, please refer to the
man pages, the online docs or the example value.
The docs recommend to simply use `nobody` as user, so no extra user has
been added to the internal user list. Instead a configuration like
this can be used:
```
run-as-user = nobody
run-as-group = nogroup
```
/cc @tenten8401
Fixes#42594
The default session might be found in `extraSessionFilePackages`, but it's not
viable to detect at evaluation time, so emit a warning.
In LightDM instead of checking `defaultSessionName` against
`displayManager.session.names` we rely on the assertions in
`desktopManager` and `windowMananger` and just check that there's at least one
default set. The second assertion could never actually be triggered.
This makes it easier to support a wider variety of .desktop session files. In
particular this makes it possible to use both the «legacy» sessions and upstream
session files.
We separate `xsession` into two parts, `xsessionWrapper` and `xsession`.
`xsessionWrapper` sets up the correct environment and then lauches the session's
Exec command (from the .desktop file), falling back to launching the default
window/desktopManager through the `xsession` script (required by at least some
nixos tests).
`xsession` then _only_ handles launching desktop-managers/window-managers defined
through `services.xserver.desktopManager.session`.
Pass gnome-session to extraSessionFilePackages, remove unnecessary environment variables, move the rest out of old session option, and then drop the option.
GPaste GNOME Shell extension uses GPaste library generated via introspection. Previously, we added the gpaste package to services.xserver.desktopManager.gnome3.sessionPath option, which
added its typelib directory to GI_TYPELIB_PATH environment variable globally, in order for GNOME Shell to be able to find it. This is not very Nix-y, though, so we have decided to patch the code to
append the path to the GI repository search path.
Additionally, the code relies on GPaste’s GSettings schemas, so we had to hard-code the paths to them as well. We ignored the GNOME Shell’s schemas, since they will already be available for the
extension inside GNOME Shell program.
Previously, the mkDesktops function produced a flat package containing
session files in the top level. As a preparation for introduction of
Wayland sessions, the files will now be placed to $out/share/xsessions.
It seems like Gitlab doesn't pick up GITLAB_UPLOADS_PATH. The internal uploads
folder is already symlinked to /run/gitlab/uploads by the gitlab package. Here
we symlink this further to ${statePath}/uploads, since /run is (usually) a tmpfs.
