I hate the thing too even though I made it, and rather just get rid of
it. But we can't do that yet. In the meantime, this brings us more
inline with autoconf and will make it slightly easier for me to write a
pkg-config wrapper, which we need.
While looking at the graph of all the outputs in my personal binary
cache it became obvious that we have a lot of self references within the
package set. That isn't an isuse by itself. However it increases the
size of the binary cache for every (reproducible) build of a package
that carries references to itself. You can no longer deduplicate the
outputs since they are all unique. One of the ways to get rid of (a few)
references is to rewrite all the symlinks that are currently used to be
relative symlinks. Two build of something that didn't really change but
carries a self-reference can the be store as the same NAR file again.
I quickly hacked together this change to see if that would yield and
success. My bash scripting skills are probably not great but so far it
seem to somewhat work.
Before, we'd always use `cc = null`, and check for that. The problem is
this breaks for cross compilation to platforms that don't support a C
compiler.
It's a very subtle issue. One might think there is no problem because we
have `stdenvNoCC`, and presumably one would only build derivations that
use that. The problem is that one still wants to use tools at build-time
that are themselves built with a C compiler, and those are gotten via
"splicing". The runtime version of those deps will explode, but the
build time / `buildPackages` versions of those deps will be fine, and
splicing attempts to work this by using `builtins.tryEval` to filter out
any broken "higher priority" packages (runtime is the default and
highest priority) so that both `foo` and `foo.nativeDrv` works.
However, `tryEval` only catches certain evaluation failures (e.g.
exceptions), and not arbitrary failures (such as `cc.attr` when `cc` is
null). This means `tryEval` fails to let us use our build time deps, and
everything comes apart.
The right solution is, as usually, to get rid of splicing. Or, baring
that, to make it so `foo` never works and one has to explicitly do
`foo.*`. But that is a much larger change, and certaily one unsuitable
to be backported to stable.
Given that, we instead make an exception-throwing `cc` attribute, and
create a `hasCC` attribute for those derivations which wish to
condtionally use a C compiler: instead of doing `stdenv.cc or null ==
null` or something similar, one does `stdenv.hasCC`. This allows quering
without "tripping" the exception, while also allowing `tryEval` to work.
No platform without a C compiler is yet wired up by default. That will
be done in a following commit.
Adds pkgsCross.wasm32 and pkgsCross.wasm64. Use it to build Nixpkgs
with a WebAssembly toolchain.
stdenv/cross: use static overlay on isWasm
isWasm doesn’t make sense dynamically linked.
* add generic x86_32 support
- Add support for i386-i586.
- Add `isx86_32` predicate that can replace most uses of `isi686`.
- `isi686` is reinterpreted to mean "exactly i686 arch, and not say i585 or i386".
- This branch was used to build working i586 kernel running on i586 hardware.
* revert `isi[345]86`, remove dead code
- Remove changes to dead code in `doubles.nix` and `for-meta.nix`.
- Remove `isi[345]86` predicates since other cpu families don't have specific model predicates.
* remove i386-linux since linux not supported on that cpu
Intuitively, one cares mainly about the host platform: Platforms differ
in meaningful ways but compilation is morally a pure process and
probably doesn't care, or those difference are already abstracted away.
@Dezgeg also empirically confirmed that > 95% of checks are indeed of
the host platform.
Yet these attributes in the old cross infrastructure were defined to be
the build platform, for expediency. And this was never before changed.
(For native builds build and host coincide, so it isn't clear what the
intention was.)
Fixing this doesn't affect native builds, since again they coincide. It
also doesn't affect cross builds of anything in Nixpkgs, as these are no
longer used. It could affect external cross builds, but I deem that
unlikely as anyone thinking about cross would use more explicit
attributes for clarity, all the more so because the rarity of inspecting
the build platform.
This has been not touched in 6 years. Let's remove it to cause less
problems when adding new cross-compiling infrastructure.
This also simplify gcc significantly.
I *want* cross-specific overrides to be verbose, so I rather not have
this shorthand. This makes the syntactic overhead more proportional to
the maintainence cost. Hopefully this pushes people towards fewer
conditionals and more abstractions.
We want `buildPackages` to be almost the same as
`buildPackages.buildPackges`, but that is only true if most packages
don't care about the target platform. The commented code however made
them all care about whether the target platform was Darwin.
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
(cherry picked from commit ba52ae5048)
This requires some small changes in the stdenv, then working around the
weird choice LLVM made to hardcode @rpath in its install name, and then
lets us remove a ton of annoying workaround hacks in many of our Go
packages. With any luck this will mean less hackery going forward.
This reverts commit eeabf85780.
This change suddenly makes tons of stdenv internals visible in
nativeBuildInputs of every derivation, which doesn't seem desirable.
E.g:
````
nix-repl> hello.nativeBuildInputs
[ «derivation /nix/store/bcfkyf6bhssxd2vzwgzmsbn7b5b9rpxc-patchelf-0.9.drv»
«derivation /nix/store/4wnshnz9wwanpfzcrdd76rri7pyqn9sk-paxctl-0.9.drv»
<< snip 10+ lines >>
«derivation /nix/store/d35pgh1lcg5nm0x28d899pxj30b8c9b2-gcc-wrapper-6.4.0.drv»
]
````
Additionally, instead of pulling them from `setup.sh`, route them via
Nix. This gets us one step closer to making stdenv be a plain attribute
set instead of a derivation.
Only cosmetic changes are done otherwise.
Real refactoring is left for later.
There's a small slow-down on my machine:
$ time nix-env -qa -P >/dev/null
gets from ~2.8 to ~3.5 seconds (negligible change in RAM).
That's most likely caused by sharing less computation between different
mkDerivation calls, and I plan to improve that soon.
This is a bit simpler now, but more importantly it scales better when I
double the number of sorts of dependencies as part of my cross
compilation work.
This is especially useful when not cross compiling. It means we can
remove the `stdenv.isGlibc` predicate too.
Additionally, use this to simplify the logic to choose the
appropriate libiconv derivation.
When not cross compiling, nativeBuildInputs and buildInputs have
identical behaviour. Currently that is implemented by having
mkDerivation do a concatenation of those variables in Nix code and pass
that to the builder via the nativeBuildInputs attribute.
However, that has some annoying side effects, like `foo.buildInputs`
evaluating to `[ ]` even if buildInputs were specified in the nix
expression for foo.
Instead, pass buildInputs and nativeBuildInputs in separate variables as
usual, and move the logic of cross compilation vs. native compilation to
the stdenv builder script. This is probably a tiny bit uglier but
fixes the previous problem.
Issue #4855.
If a package's meta has `knownVulnerabilities`, like so:
stdenv.mkDerivation {
name = "foobar-1.2.3";
...
meta.knownVulnerabilities = [
"CVE-0000-00000: remote code execution"
"CVE-0000-00001: local privilege escalation"
];
}
and a user attempts to install the package, they will be greeted with
a warning indicating that maybe they don't want to install it:
error: Package ‘foobar-1.2.3’ in ‘...default.nix:20’ is marked as insecure, refusing to evaluate.
Known issues:
- CVE-0000-00000: remote code execution
- CVE-0000-00001: local privilege escalation
You can install it anyway by whitelisting this package, using the
following methods:
a) for `nixos-rebuild` you can add ‘foobar-1.2.3’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"foobar-1.2.3"
];
}
b) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘foobar-1.2.3’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"foobar-1.2.3"
];
}
Adding either of these configurations will permit this specific
version to be installed. A third option also exists:
NIXPKGS_ALLOW_INSECURE=1 nix-build ...
though I specifically avoided having a global file-based toggle to
disable this check. This way, users don't disable it once in order to
get a single package, and then don't realize future packages are
insecure.
