Running agetty on ttyS0 interferes with the backdoor, which uses ttyS0
as its standard error. After agetty starts, writes to the stderr file
descriptor will return EIO (though doing "exec 2>/proc/self/fd/2" will
miracuously fix this).
http://hydra.nixos.org/build/3252782
Cgroups are handled by systemd now. Systemd's cgroup support does not
do all the things that cgrulesengd does, but they're likely to
interact poorly with each other.
‘systemd-vconsole-setup’ by default operates on /dev/tty0, the
currently active tty. Since it puts /dev/tty0 in Unicode or ASCII
mode, if the X server is currently active when it runs, keys such as
Alt-F4 won't reach the X server anymore. So use /dev/tty1 instead.
We now just have a simple attribute called "version24" which replaces all those
pesky versionOlder that were spreading throughout the file and makes things way
more readable.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
By default the path is determined related to ServerRoot. Unfortunately
ServerRoot is pointing to the Nix store and the web server can't write to it.
We now create a directory called "runtime" withen the stateDir and point
DefaultRuntimeDir to it.
For more information on the DefaultRuntimeDir directive, please see:
http://httpd.apache.org/docs/2.4/mod/core.html#defaultruntimedir
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
NameVirtualHost no longer has any effect on version 2.4 and just emits ugly
warnings, so let's not use it if we use 2.4.
More information: http://httpd.apache.org/docs/2.4/upgrading.html#misc
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The Order/Deny directives are deprecated in version 2.4, so we're going to
define two wrappers for allDenied and allGranted in order to properly generate
configurations for both version 2.2 and 2.4.
For more information an access control changes, see:
http://httpd.apache.org/docs/2.4/upgrading.html#access
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Now, MPMs can be loaded at runtime and it's no longer required to compile in one
of the MPM modules statically. So, if version is >= 2.4, load the MPM module
corresponding to the multiProcessingModule value of the service module.
For details, please see: http://httpd.apache.org/docs/2.4/mpm.html
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Beginning with version 2.3, the authn were refactored. As a result, authn_alias
is now part of the new module authn_core, so let's use authn_core instead of
authn_alias.
For details please see: http://httpd.apache.org/docs/2.4/upgrading.html#misc
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The new configuration.nix option 'environment.enableBashCompletion'
determines whether bash completion is automatically enabled system-wide
for all interactive shells or not. The default setting is 'off'.
The new configuration.nix option 'environment.enableBashCompletion'
determines whether bash completion is automatically enabled system-wide
for all interactive shells or not. The default setting is 'off'.
My main reason for adding this is the ability to turn off helpers
altogether. If you are not using any of the special protocols, keeping
them turned off is safest, and in case you do want to use them, it's
best to configure them through the new CT target for your network
topology. Perhaps some sane defaults for nixos can be examined in the
future.
This change has no impact if you don't touch the added options, so no
need to adapt.
This is meant to replace /proc/sys/net/ipv4/conf/*/rp_filter, which
only works for ipv4. Furthermore, it's nicer to handle this kind of
filtering in the firewall.
There are some more subtle differences, please see:
https://home.regit.org/netfilter-en/secure-use-of-helpers/
I chose to enable this by default (when the firewall is enabled) as
it's a good idea in general. Only people with advanced routing needs
might not want this, but I guess they don't use the nixos firewall
anyway and use a custom solution. Furthermore, the option only becomes
available in kernel 3.3+, so conservative nixos users that just stick
to the default kernel will not need to act now just yet.
The triggers are just arbitrary strings that are included in the unit
under X-Restart-Triggers. The idea is that if they change between
reconfigurations, switch-to-configuration will restart the unit
because its store path changed. This is mostly useful for services
that implicitly depend on generated files in /etc. Thus you can say
restartTriggers = [ confFile ];
where ‘confFile’ is the derivation that generated the /etc file in
question.
Flushing is bad if the Nix store is on a remote filesystem accessed
over that interface.
http://hydra.nixos.org/build/3184162
Also added a interface option ‘prefixLength’ as a better alternative
to ‘subnetMask’.
Instead it's enough to depend on
sys-subsystem-net-devices-<interface>.device, which in turn has a
"wants" dependency on the service (if any) that creates the interface.
For each statically configured interface, we now create a unit
‘<interface>-cfg.service’ which gets started as soon as the network
device comes up. Similarly, each bridge defined in
‘networking.bridges’ and virtual interface in ‘networking.interfaces’
is created by a service ‘<interface>.service’.
So if we have
networking.bridges.br0.interfaces = [ "eth0" "eth1" ];
networking.interfaces =
[ { name = "br0";
ipAddress = "192.168.1.1";
}
];
then there will be a unit ‘br0.service’ that depends on
‘sys-subsystem-net-devices-eth0.device’ and
‘sys-subsystem-net-devices-eth1.device’, and a unit ‘br0-cfg.service’
that depends on ‘sys-subsystem-net-devices-br0.device’.
The special handling for cronjobs should probably move to the cron
module (logcheckIgnore = bool option) in the future, as it's more
natural to just declare a cronjob, and mark it as "log-ignored",
instead of adding cronjobs through logcheck.
But as systemCronjobs is not an attrset yet (just simple strings),
this would require adding an attrset for cronjobs or parsing strings
in the nix language to get hold of the cron-user and command.
So for now, I keep the interface within logcheck's module.
However SLIM is still broken and you have to create a
/usr/lib/dri/fglrx_dri.so symlink pointing to
/run/opengl-driver/lib/fglrx_dri.so
At least fgl_glxgears shows 10 times more frames per second now
This is broken because it requires restarting applications to see new
NSS modules. The proper way to handle NSS modules is through nscd.
See commit 554ae9908b.
The upower daemon needs the gdbus command (which is weird given that
upower links against dbus_glib, but ah well...). This fixes suspend
in KDE with systemd.
Alsa-utils provides a udev rule to restore volume settings, so use
that instead of restoring them from a systemd service. The
"alsa-store" service saves the settings on shutdown.
It's not enough to say "after udev-settle.service" since
udev-settle.service is not wanted/required anywhere - we need to say
"wants udev-settle.service" as well.
This should fix problems with ALSA and X11 initialisation that people
have been seeing.
So instead of:
boot.systemd.services."foo".serviceConfig =
''
StartLimitInterval=10
CPUShare=500
'';
you can say:
boot.systemd.services."foo".serviceConfig.StartLimitInterval = 10;
boot.systemd.services."foo".serviceConfig.CPUShare = 500;
This way all unit options are available and users can set/override
options in configuration.nix.
This makes it easier for systemd to track it and avoids race conditions such as
this one:
systemd[1]: PID file /run/sshd.pid not readable (yet?) after start.
systemd[1]: Failed to start SSH Daemon.
systemd[1]: Unit sshd.service entered failed state.
systemd[1]: sshd.service holdoff time over, scheduling restart.
systemd[1]: Stopping SSH Daemon...
systemd[1]: Starting SSH Daemon...
sshd[2315]: Server listening on 0.0.0.0 port 22.
sshd[2315]: Server listening on :: port 22.
sshd[2335]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use.
sshd[2335]: error: Bind to port 22 on :: failed: Address already in use.
sshd[2335]: fatal: Cannot bind any address.
systemd[1]: Started SSH Daemon.
When spamd isn't running as 'root', it cannot access the usual ~/.spamassassin
path where user-specific files normally reside. Instead, we use the path
/var/lib/spamassassin-<user> to store those home directories.
* Add group 'networkmanager' and implement polkit configuration
that allows users in this group to make persistent, system-wide
changes to NetworkManager settings.
* Add support for ModemManager. 3G modems should work out of the
box now (it does for me...). This introduces a dependency on
pkgs.modemmanager.
* Write NetworkManger config file to Nix store, and let the
daemon use it from there.
It specifies what mingetty will be stopped, if a bad filesystem
triggers an emergency shell.
That should be ttyS0 on headless systems, and in that case,
nixos should stop the ttyS0 mingetty from getting in.
