boot.loader.grub.device` was hardcoded to `bootDevice`, which is
wrong, because that's the device for `/`, and with `useBootLoader`
the boot loader is not on that device.
This bug probably came into existence because of bad naming;
`virtualisation.bootDevice` has description
"The disk to be used for the root filesystem", which is very confusing;
it should be `.rootDevice` then!
Unfortunately, the description is right and the attribute name is wrong,
so it is not easy to change this without deprecation.
This commit ensures that even if you use `useBootLoader` and
`diskInterface == "scsi"`, the created VM can boot through, and can run
`nixos-rebuild afterwards.
It also adds extra commentary to explain what's going on in this module
in general in relation to `useBootLoader`.
This explanation was contained in the description of
security.initialRootPassword but got lost when it was deprecated
a long ago (f496c3c) and removed.
This option has been deprecated for a long time because is redundant
(users.users.root.initialHashedPassword exists).
Moreover, being of type string, it required to handle the special value
"!" separately, instead of using just `null`.
This explains the
# Allow the user to log in as root without a password.
users.users.root.initialHashedPassword = "";
that the NixOS installer live systems use in
`profiles/installation-device.nix`.
Currently the service doesn't detect if on of the packages is updated
and doesn't restart.
By manually adding a trigger we make sure the service restarts if any of
the involved packages update.
With 'set 3 boot on' the error 'file system "/boot" is not a FAT EFI
system partition (ESP) file system' occurs when running
"nixos-install" during the basic installation (tested in in a
VirtualBox VM).
In certain cases, for example when custom OpenLDAP modules are
compiled into the binary, users may want to override the package used
for OpenLDAP.
This is especially common in setups where LDAP is the primary
authentication source, as good password hashing mechanisms need to be
enabled as extra modules.
nixos/tests/initrd-openvpn: Add test for openvpn in the initramfs
The module in this commit adds new options that allows the
integration of an OpenVPN client into the initrd.
This can be used e.g. to remotely unlock LUKS devices.
This commit also adds two tests for `boot.initrd.network.openvpn`.
The first one is a basic test to validate that a failing connection
does not prevent the machine from booting.
The second test validates that this module actually creates a valid
openvpn connection.
For this, it spawns three nodes:
- The client that uses boot.initrd.network.openvpn
- An OpenVPN server that acts as gateway and forwards a port
to the client
- A node that is external to the OpenVPN network
The client connects to the OpenVPN server and spawns a netcat instance
that echos a value to every client.
Afterwards, the external node checks if it receives this value over the
forwarded port on the OpenVPN gateway.
We remove the configFile build flag override in the NixOS module.
Instead of embedding the conf file link to the binaries, we symlink it
to /etc/nsd/nsd.nix, the hardcoded config file location for the
various CLI nsd utilities.
This config file build option override is triggerring a nsd rebuild
for each configuration change. This prevent us to use the nixos cache
in many cases.
Co-authored-by: Erjo <erjo@cocoba.work>
test failed because gnutls-cli does not properly report connection
errors any more, fixed by increasing the debug level for gnutls-cli
Fixes: #84507Closes: #90718
This can be used to explicitly specify a specific dtb file, relative to
the dtb base.
Update the generic-extlinux-compatible module to make use of this option.
Some bootloaders might not properly detect the model.
If the specific model is known by configuration, provide a way to
explicitly point to a specific dtb in the extlinux.conf.
This option exposes the builder command used to populate an image,
honoring all options except the -c <path-to-default-configuration>
argument.
Useful to have for sdImage.populateRootCommands.
Special care needs to be taken w.r.t cross - the populate command runs
on the host platform, the activation script on the build platform (so
the builders differ)
Keeping the VM state test across several run sometimes lead to subtle
and hard to spot errors in practice. We delete the VM state which
contains (among other things) the qcow volume.
We also introduce a -K (--keep-vm-state) flag making VM state to
persist after the test run. This flag makes test-driver.py to match
its previous behaviour.
Turns out, on smaller images (~800MiB uncompressed sdcard image size),
the current fudge factor is way too small to even get the system to the
phase where it can resize itself.
I first tried with 1.05, but it wasn't enough.
Merges https://github.com/NixOS/nixos-hardware into nixpkgs.
This will give better discoverability, and considering the low
turnover (less than 100 commits in the last year and only 350 total)
it won’t make any dent on the size of nixpkgs.
We have a monorepo, let’s use it
It is going to be merged into nixpkgs, under `nixos/hardware`.
This will give better discoverability, and considering the low
turnover (less than 100 commits in the last year and only 350 total)
it won’t make any dent on the size of nixpkgs.
We have a monorepo, let’s use it.
Enhance the heuristics to make sure that a user doesn't accidentally
upgrade across two major versions of Nextcloud (e.g. from v17 to v19).
The original idea/discussion has been documented in the nixpkgs manual[1].
This includes the following changes:
* `nextcloud19` will be selected automatically when having a stateVersion
greater or equal than 20.09. For existing setups, the package has to
be selected manually to avoid accidental upgrades.
* When using `nextcloud18` or older, a warning will be thrown which recommends
upgrading to `nextcloud19`.
* Added a brief paragraph about `nextcloud19` in the NixOS 19.09 release
notes.
* Restart `phpfpm` if the Nextcloud-package (`cfg.package`) changes[2].
[1] https://nixos.org/nixos/manual/index.html#module-services-nextcloud-maintainer-info
[2] https://github.com/NixOS/nixpkgs/pull/89427#issuecomment-638885727
This option exposes the prefconfigured nextcloud-occ
program. nextcloud-occ can then be used in other systemd services or
added in environment.systemPackages.
The nextcloud test shows how it can be add in
environment.systemPackages.
The nix store more-or-less requires o+rx on all parent directories.
This is primarily because nix runs builders in a uid/gid mapped
user-namespace, and those builders have to be able to operate on the nix
store.
This check is especially helpful because nix does not produce a helpful
error on its own (rather, creating directories and such works, it's not
until 'mount --bind' that it gets an EACCES).
Helps users who run into this opaque error, such as in #67465.
Possibly fixes that issue if bad permissions were the only cause.
Turns out, #75510 was too restrictive.
We also need to allow str here, as some modules set this to
"/run/wrappers" to bring `/run/wrappers/bin` into $PATH of a unit.
- Add serve.enable option, which configures uwsgi and nginx to serve
the mailman-web application;
- Configure services to log to the journal, where possible. Mailman
Core does not provide any options for this, but will now log to
/var/log/mailman;
- Use a unified python environment for all components, with an
extraPackages option to allow use of postgres support and similar;
- Configure mailman's postfix module such that it can generate the
domain and lmtp maps;
- Fix formatting for option examples;
- Provide a mailman-web user to run the uwsgi service by default
- Refactor Hyperkitty's periodic jobs to reduce repetition in the
expressions;
- Remove service dependencies not related to functionality included in
the module, such as httpd -- these should be configured in user config
when used;
- Move static files root to /var/lib/mailman-web-static by default. This avoids
permission issues when a static file web server attempts to access
/var/lib/mailman which is private to mailman. The location can still
be changed by setting services.mailman.webSettings.STATIC_ROOT;
- Remove the webRoot option, which seems to have been included by
accident, being an unsuitable directory for serving via HTTP.
- Rename mailman-web.service to mailman-web-setup.service, since it
doesn't actually serve mailman-web. There is now a
mailman-uwsgi.service if serve.enable is set to true.
Since Buildbot 0.9.0, status targets were deprecated and ignored.
There's a very small line on startup explaining that, and status simply
isn't reported. Avoid others the same headaches, and do it right in the
NixOS module.
As there might have been changes in the way reporters are organized, and
configuration might need to be migrated remove the old option, and not
just provide an alias.
