This installs the kio "man:" protocol handler, which fixes the UNIX manual
section in the KDE Help Center.
Note that kde currently parses "/etc/man.conf" manually, if `$MANPATH` is not
set, to build its man page index. (if https://bugs.kde.org/show_bug.cgi?id=404022
is addressed, the "/etc/man.conf" symlink should not be necessary anymore)
Force this option to false. Leaving this as true (currently the default)
is dangerous. If the TT-RSS installation upgrades itself to a newer
version requiring a schema update, the installation will break the next
time the TT-RSS systemd service is restarted.
Ideally, the installation itself should be immutable (see
https://github.com/NixOS/nixpkgs/issues/55300).
* redmine: 3.4.8 -> 4.0.1
* nixos/redmine: update nixos test to run against both redmine 3.x and 4.x series
* nixos/redmine: default new installs from 19.03 onward to redmine 4.x series, while keeping existing installs on redmine 3.x series
* nixos/redmine: add comment about default redmine package to 19.03 release notes
* redmine: add aandersea as a maintainer
munin_update relies on a stats file that exists, but isn't found in the
default location on NixOS; the appropriate plugin configuration is
added.
munin_stats relies on munin-cron writing a logfile, which the NixOS
build of munin does not. (This is probably fixable in the munin package,
but I don't have time to dig into that right now.)
This permits custom styling of the generated HTML without needing to
build your own Munin package from source. Also comes with an example
that works as a passable dark theme for Munin.
extraAutoPlugins lets you list plugins and plugin directories to be
autoconfigured, and extraPlugins lets you enable plugins on a one-by-one
basis. This can be used to enable plugins from contrib (although you'll
need to download and check out contrib yourself, then point these
options at it), or plugins you've written yourself.
munin-graph is hardcoded to use DejaVu Mono for the graph legends; if it
can't find it, there's no guarantee it finds a monospaced font at all,
and if it can't find a monospaced font the legends come out badly
misformatted.
This is just a set of globs to remove from the active plugins directory
after autoconfiguration is complete.
I also removed the hard-coded disabling of "diskstats", since it seems
to work just fine now.
Since this module was written, Munin has moved their documentation from
munin-monitoring.org/wiki to guide.munin-monitoring.org. Most of the
links were broken, and the ones that weren't went to "please use the new
site" pages.
NixOS currently defaults services.nginx.package to
nginxStable. Including configuration files from nginxMainline could
potentially cause incompatible configuration.
- allow for options to (added 2 options):
- agree to eula (eula.txt) true/false will create symlink over
existing eula.txt to `/nix/store/...`.
- whitelist users (optional and will symlink over existing
whitelist.json and create backup)
- server.properties can be configured with the serverProperties
option. If there is an existing server.properties it will
copy it to a server.properties.old to keep the old
one. server.properties MUST be writable thus symlinking is not
an option.
- all ports that are stated in `server.properties` are exposed
properly in the firewall.
(infinisil) nixos/minecraft-server: Fix, refactor and polish
Adds an option `declarative` (defaulted to false), in order to stay
(mostly) backwards compatible. The only thing that's not backwards
compatible is that you now need to agree to the EULA on evaluation time,
but that's guarded by an assertion and therefore doesn't need a release
note.
27982b408e introduced a bug when
refactoring the encrypted-devices module, causing some encrypted
filesystem options to not be recognized anymore.
See e.g. https://hydra.nixos.org/build/88145490
New option `extraPluginPaths' that allows users to supply additional
paths for netdata plugins. Very useful for when you want to use
custom collection scripts.
This allows the VM to provide a `configuration.nix` file to the VM.
The test doesn't work in sandbox because it needs Internet (however it
works interactively).
The Openstack metadata service exposes the EC2 API. We use the
existing `ec2.nix` module to configure the hostname and ssh keys of an
Openstack Instance.
A test checks the ssh server is well configured.
This is mainly to reduce the size of the image (700MB). Also,
declarative features provided by cloud-init are not really useful
since we would prefer to use our `configuration.nix` file instead.
1. Allow syslog identifiers with special characters
2. Do not write a pid file as we are running in foreground anyway
3. Clean up the module for readability
Without this, when deploying using nixops, restarting sshguard would make
nixops show an error about restarting the service although the service is
actually being restarted.
This should make the composability of kernel configurations more straigthforward.
- now distinguish freeform options from tristate ones
- will look for a structured config in kernelPatches too
one can now access the structuredConfig from a kernel via linux_test.configfile.structuredConfig
in order to reinject it into another kernel, no need to rewrite the config from scratch
The following merge strategies are used in case of conflict:
-- freeform items must be equal or they conflict (mergeEqualOption)
-- for tristate (y/m/n) entries, I use the mergeAnswer strategy which takes the best available value, "best" being defined by the user (by default "y" > "m" > "n", e.g. if one entry is both marked "y" and "n", "y" wins)
-- if one item is both marked optional/mandatory, mandatory wins (mergeFalseByDefault)
I've been asked, on numerous occasions, by my students and others, how
to 'sudo' on NixOS.
Of course new users could read up in the manual on how to do that, or we
could make it more accessible for them by simply making it visible in
the default `configuration.nix` file.
Additionally, as raised in [1], replacing `guest` with something more
recognizable could be potentially beneficial to new users. I've
opted for `jane` for now.
[1]: https://github.com/NixOS/nixpkgs/pull/54519#issuecomment-457012223
Don't add the testing "webcam" device,
which is unexpected to see when querying
what devices fwupd believes exist :).
Won't change behavior for anyone defining
the blacklistPlugin option already,
but doesn't seem worth making more complicated.
The motivation for this is that some applications are unaware
of this feature and can set their volume to 100% on startup
harming people ears and possiblly blowing someone's audio
setup.
I noticed this in #54594 and by extension epiphany[0].
Please also note that many other distros have this default for
the reason outlined above.
Closes#5632#54594
[0]: https://bugzilla.gnome.org/show_bug.cgi?id=675217
Systemd provides some functionality to escape strings that are supposed
to be part of a unit name[1]. This seems to be used for interface names
in `sys-subsystem-net-devices-{interface}.device` and breaks
wpa_supplicant if the wireless interface name has a dash which is
encoded to \x2d.
Such an interface name is rather rare, but used i.e. when configuring
multiple wireless interfaces with `networking.wlanInterfaces`[2] to have on
interface for `wpa_supplicant` and another one for `hostapd`.
[1] https://www.freedesktop.org/software/systemd/man/systemd-escape.html
[2] https://nixos.org/nixos/options.html#networking.wlaninterfaces
Add an ExecReload command to the prosody service, to allow reloading
prosody by sending SIGHUP to the main process, for example to update
certificates without restarting the server. This is exactly how the
`prosodyctl` tool does it.
Note: Currently there is a bug which prevents mod_http from reloading the
certificates properly: https://issues.prosody.im/1216.
`collectd' might fail because of a failure in any of numerous plugins.
For example `virt' plugin sometimes fails if `collectd' is started before `libvirtd'
The default galera_new_cluster script tries to set this environment
variable using systemctl set-environment which doesn't work if the
variable is not being used in the unit file ;)
Without this line, attempting to copy and paste non-ASCII characters
will result in error messages like the following (and pasting from the
server to the client will not work):
```
CLIPBOARD clipboard_send_data_response_for_text: 823 : ERROR: clipboard_send_data_response_for_text: bad string
```
There are situations where several filesystems reside on a single encrypted LUKS
device (e.g. when using BTRFS subvolumes).
Simply generating a `boot.init.luks.devices.NAME.device` entry for each mounted
filesystem will result in an error later when evaluating the nix expression in
`hardware-configuration.nix`.
For large setups it is useful to list all databases explicit
(for example if temporary databases are also present) and store them in extra
files.
For smaller setups it is more convenient to just backup all databases at once,
because it is easy to forget to update configuration when adding/renaming
databases. pg_dumpall also has the advantage that it backups users/passwords.
As a result the module becomes easier to use because it is sufficient
in the default case to just set one option (services.postgresqlBackup.enable).
This creates a dependency cycle when used with boot.tmpOnTmpfs:
basic.target <- tmp.mount <- swap.target <- zram-init-dev0 <- basic.target
This same fix is done already for tmp.mount
Fixes https://github.com/NixOS/nixpkgs/issues/47474
- add `zramSwap.algorithm` option, which allows to change compressor
declaratively. zstd as default
- add `zramSwap.swapDevices` option, which allows to define how many zram
devices will be used as swap. Rest devices can be managed freely
- simpler floating calculations
- fix udev race condition
- some documentation changes
- replaced `/sys/block/zram*` handling with `zramctl`, because I had occasional
"Device is busy" error (looks like zram has to be configured in predefined order)
- added `memoryPercent` and `algorithm` as restart triggers. I think, it was
a bug that changing `memoryPercent` in configuration wasn't applied immediately.
- removed a bind to .swap device. While it looks natural (when swap device goes
off, so should zram device), it wasn't implemented properly. This caused problems
with swapon/swapoff:
```
$ cat /proc/swaps
Filename Type Size Used Priority
/dev/zram0 partition 8166024 0 -2
/var/swapfile file 5119996 5120 1
$ sudo swapoff -a
$ sudo swapon -a
swapon: /dev/zram0: read swap header failed
$ cat /proc/swaps
Filename Type Size Used Priority
/var/swapfile file 5119996 0 1
```
Although this can be added to `extraOptions` I figured that it makes
sense to add an option to explicitly promote this feature in our
documentation since most of the self-hosted gitea instances won't be
intended for common use I guess.
Also added a notice that this should be added after the initial deploy
as you have to register yourself using that feature unless the install
wizard is used.
Since nix 2.0 the no-build-hook option was replaced by the builders options
that allows to override remote builders ad-hoc.
Since it is useful to disable remote builders updating nixos without network,
this commit reintroduces the option.
cleanSource does not appear to work correctly in this case. The path
does not get coerced to a string, resulting in a dangling symlink
produced in channel.nix. Not sure why, but this
seems to fix it.
Fixes#51025.
/cc @elvishjericco
According to systemd-nspawn(1), --network-bridge implies --network-veth,
and --port option is supported only when private networking is enabled.
Fixes#52417.
Symlinking works for most plugins and themes, but Avada, for instance, fails to
understand the symlink, causing its file path stripping to fail. This results in
requests that look like:
https://example.com/wp-content//nix/store/...plugin/path/some-file.js
Since hard linking directories is not allowed, copying is the next best thing.
slab_nomerge may reduce surface somewhat
slub_debug is used to enable additional sanity checks and "red zones" around
allocations to detect read/writes beyond the allocated area, as well as
poisoning to overwrite free'd data.
The cost is yet more memory fragmentation ...
While at it (see previous commit), using attrNames in combination with
length is a bit verbose for checking whether the filtered attribute set
is empty, so let's just compare it against an empty attribute set.
Signed-off-by: aszlig <aszlig@nix.build>
When generating values for the services.nsd.zones attribute using values
from pkgs, we'll run into an infinite recursion because the nsd module
has a condition on the top-level definition of nixpkgs.config.
While it would work to push the definition a few levels down, it will
still only work if we don't use bind tools for generating zones.
As far as I could see, Python support for BIND seems to be only needed
for the dnssec-* tools, so instead of using nixpkgs.config, we now
directly override pkgs.bind instead of globally in nixpkgs.
To illustrate the problem with a small test case, instantiating the
following Nix expression from the nixpkgs source root will cause the
mentioned infinite recursion:
(import ./nixos {
configuration = { lib, pkgs, ... }: {
services.nsd.enable = true;
services.nsd.zones = import (pkgs.writeText "foo.nix" ''
{ "foo.".data = "xyz";
"foo.".dnssec = true;
}
'');
};
}).vm
With this change, generating zones via import-from-derivation is now
possible again.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @pngwjpgh
This adds a NixOS option for setting the CPU max and min frequencies
with `cpufreq`. The two options that have been added are:
- `powerManagement.cpufreq.max`
- `powerManagement.cpufreq.min`
It also adds an alias to the `powerManagement.cpuFreqGovernor` option as
`powerManagement.cpufreq.governor`. This updates the installer to use
the new option name. It also updates the manual with a note about
the new name.
For the hardened profile disable symmetric multi threading. There seems to be
no *proven* method of exploiting cache sharing between threads on the same CPU
core, so this may be considered quite paranoid, considering the perf cost.
SMT can be controlled at runtime, however. This is in keeping with OpenBSD
defaults.
TODO: since SMT is left to be controlled at runtime, changing the option
definition should take effect on system activation. Write to
/sys/devices/system/cpu/smt/control
For the hardened profile enable flushing whenever the hypervisor enters the
guest, but otherwise leave at kernel default (conditional flushing as of
writing).
Introduces the option security.protectKernelImage that is intended to control
various mitigations to protect the integrity of the running kernel
image (i.e., prevent replacing it without rebooting).
This makes sense as a dedicated module as it is otherwise somewhat difficult
to override for hardened profile users who want e.g., hibernation to work.
The aim is to minimize surprises: when the user explicitly installs a
package in their configuration, it should override any package
implicitly installed by NixOS.
This, paired with the previous commit, ensures the channel won't be held
back from a kernel upgrade and a non-building sd image, while still
having a new-kernel variant available.
Use googleOsLogin for login instead.
This allows setting users.mutableUsers back to false, and to strip the
security.sudo.extraConfig.
security.sudo.enable is default anyhow, so we can remove that as well.
The OS Login package enables the following components:
AuthorizedKeysCommand to query valid SSH keys from the user's OS Login
profile during ssh authentication phase.
NSS Module to provide user and group information
PAM Module for the sshd service, providing authorization and
authentication support, allowing the system to use data stored in
Google Cloud IAM permissions to control both, the ability to log into
an instance, and to perform operations as root (sudo).
Having pam_unix set to "sufficient" means early-succeeding account
management group, as soon as pam_unix.so is succeeding.
This is not sufficient. For example, nixos modules might install nss
modules for user lookup, so pam_unix.so succeeds, and we end the stack
successfully, even though other pam account modules might want to do
more extensive checks.
Other distros seem to set pam_unix.so to 'required', so if there are
other pam modules in that management group, they get a chance to do some
validation too.
For SSSD, @PsyanticY already added a workaround knob in
https://github.com/NixOS/nixpkgs/pull/31969, while stating this should
be the default anyway.
I did some thinking in what could break - after this commit, we require
pam_unix to succeed, means we require `getent passwd $username` to
return something.
This is the case for all local users due to the passwd nss module, and
also the case for all modules installing their nss module to
nsswitch.conf - true for ldap (if not explicitly disabled) and sssd.
I'm not so sure about krb5, cc @eqyiel for opinions. Is there some nss
module loaded? Should the pam account module be placed before pam_unix?
We don't drop the `security.pam.services.<name?>.sssdStrictAccess`
option, as it's also used some lines below to tweak error behaviour
inside the pam sssd module itself (by changing it's 'control' field).
This is also required to get admin login for Google OS Login working
(#51566), as their pam_oslogin_admin accounts module takes care of sudo
configuration.
Although the package itself builds fine, the module fails because it
tries to log into a non-existant file in `/var/log` which breaks the
service. Patching to default config to log to stdout by default fixes
the issue. Additionally this is the better solution as NixOS heavily
relies on systemd (and thus journald) for logging.
Also, the runtime relies on `/etc/localtime` to start, as it's not
required by the module system we set UTC as sensitive default when using
the module.
To ensure that the service's basic functionality is available, a simple
NixOS test has been added.
This flag causes the shairport-sync server to attempt to daemonize, but it looks like systemd is already handling that. With the `-d` argument, shairport-sync immediately exits—it seems that something (systemd I'm guessing?) is sending it SIGINT or SIGTERM.
The [upstream systemd unit](https://github.com/mikebrady/shairport-sync/blob/master/scripts/shairport-sync.service.in#L10) doesn't pass `-d`.
The `iotop` program can't be started by an unprivileged user because of
missing root privileges. The issue can be fixed by creating a
setcap wrapper for `iotop` which contains `cap_net_admin`.
pkgs.owncloud still pointed to owncloud 7.0.15 (from May 13 2016)
Last owncloud server update in nixpkgs was in Jun 2016.
At the same time Nextcloud forked away from it, indicating users
switched over to that.
cc @matej (original maintainer)
Systemd provides an option for allocating DynamicUsers
which we want to use in NixOS to harden service configuration.
However, we discovered that the user wasn't allocated properly
for services. After some digging this turned out to be, of course,
a cache inconsistency problem.
When a DynamicUser creation is performed, Systemd check beforehand
whether the requested user already exists statically. If it does,
it bails out. If it doesn't, systemd continues with allocating the
user.
However, by checking whether the user exists, nscd will store
the fact that the user does not exist in it's negative cache.
When the service tries to lookup what user is associated to its
uid (By calling whoami, for example), it will try to consult
libnss_systemd.so However this will read from the cache and tell
report that the user doesn't exist, and thus will return that
there is no user associated with the uid. It will continue
to do so for the cache duration time. If the service
doesn't immediately looks up its username, this bug is not
triggered, as the cache will be invalidated around this time.
However, if the service is quick enough, it might end up
in a situation where it's incorrectly reported that the
user doesn't exist.
Preferably, we would not be using nscd at all. But we need to
use it because glibc reads nss modules from /etc/nsswitch.conf
by looking relative to the global LD_LIBRARY_PATH. Because LD_LIBRARY_PATH
is not set globally (as that would lead to impurities and ABI issues),
glibc will fail to find any nss modules.
Instead, as a hack, we start up nscd with LD_LIBRARY_PATH set
for only that service. Glibc will forward all nss syscalls to
nscd, which will then respect the LD_LIBRARY_PATH and only
read from locations specified in the NixOS config.
we can load nss modules in a pure fashion.
However, I think by accident, we just copied over the default
settings of nscd, which actually caches user and group lookups.
We already disable this when sssd is enabled, as this interferes
with the correct working of libnss_sss.so as it already
does its own caching of LDAP requests.
(See https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/deployment_guide/usingnscd-sssd)
Because nscd caching is now also interferring with libnss_systemd.so
and probably also with other nsss modules, lets just pre-emptively
disable caching for now for all options related to users and groups,
but keep it for caching hosts ans services lookups.
Note that we can not just put in /etc/nscd.conf:
enable-cache passwd no
As this will actually cause glibc to _not_ forward the call to nscd
at all, and thus never reach the nss modules. Instead we set
the negative and positive cache ttls to 0 seconds as a workaround.
This way, Glibc will always forward requests to nscd, but results
will never be cached.
Fixes#50273
Right now it's not at all obvious that one can override this option
using `services.logind.extraConfig`; we might as well add an option
for `killUserProcesses` directly so it's clear and documented.
Could also move kdc.conf, but this makes it inconvenient to use command line
utilities with heimdal, as it would require specifying --config-file with every
command.
Allow switching out kerberos server implementation.
Sharing config is probably sensible, but implementation is different enough to
be worth splitting into two files. Not sure this is the correct way to split an
implementation, but it works for now.
Uses the switch from config.krb5 to select implementation.
As cassandra start script hardcodes the location of logback
configuration to `CASSANDRA_CONF_DIR/logback.xml` there is no way to
pass an alternate file via `$JVM_OPTS` for example.
Also, without logback configuration DEBUG level is used which is not
necessary for standard usage.
With this commit a default logback configuration is set with log level
INFO.
Configuration borrowed from:
https://docs.datastax.com/en/cassandra/3.0/cassandra/configuration/configLoggingLevels.html
Instead of setting User/Group only when DynamicUser is disabled, the
previous version of the code set it only when it was enabled. This
caused services with DynamicUser enabled to actually run as nobody, and
services without DynamicUser enabled to run as root.
Regression from fbb7e0c82f.
This cleans up the CockroachDB expression, with a few suggestions from
@aszlig.
However, it brought up the note of using systemd's StateDirectory=
directive, which is a nice feature for managing long-term data files,
especially for UID/GID assigned services. However, it can only manage
directories under /var/lib (for global services), so it has to introduce
a special path to make use of it at all in the case someone wants a path
at a different root.
While the dataDir directive at the NixOS level is _occasionally_ useful,
I've gone ahead and removed it for now, as this expression is so new,
and it makes the expression cleaner, while other kinks can be worked out
and people can test drive it.
CockroachDB's dataDir directive, instead, has been replaced with
systemd's StateDirectory management to place the data under
/var/lib/cockroachdb for all uses.
There's an included RequiresMountsFor= clause like usual though, so if
people want dependencies for any kind of mounted device at boot
time/before database startup, it's easy to specify using their own
mount/filesystems clause.
This can also be reverted if necessary, but, we can see if anyone ever
actually wants that later on before doing it -- it's a backwards
compatible change, anyway.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Currently there are two calls to curl in the reloadScript, neither which
check for errors. If something is misconfigured (like wrong authToken),
the only trace that something wrong happened is this log message:
Asking Jenkins to reload config
<h1>Bad Message 400</h1><pre>reason: Illegal character VCHAR='<'</pre>
The service isn't marked as failed, so it's easy to miss.
Fix it by passing --fail to curl.
While at it:
* Add $curl_opts and $jenkins_url variables to keep the curl command
lines DRY.
* Add --show-error to curl to show short error message explanation when
things go wrong (like HTTP 401 error).
* Lower-case the $CRUMB variable as upper case is for exported environment
variables.
The new behaviour, when having wrong accessToken:
Asking Jenkins to reload config
curl: (22) The requested URL returned error: 401
And the service is clearly marked as failed in `systemctl --failed`.
When privateNetwork is enabled, currently the container's interface name
is derived from the container name. However, there's a hard limit
on the size of interface names. To avoid conflicts and other issues,
we set a limit on the container name when privateNetwork is enabled.
Fixes#38509
