This option represents the ZNC configuration as a Nix value. It will be
converted to a syntactically valid file. This provides:
- Flexibility: Any ZNC option can be used
- Modularity: These values can be set from any NixOS module and will be
merged correctly
- Overridability: Default values can be overridden
Also done:
Remove unused/unneeded options, mkRemovedOptionModule unfortunately doesn't work
inside submodules (yet). The options userName and modulePackages were never used
to begin with
The system variable is used from the (possibly polluted) shell
environment.
This causes nixos-install to fail in a nix-shell because the system
shell variable is automatically set to the current system (e.g.
x86_64-linux).
- added package option to specify which version of redmine
- added themes option back in to allow specifying redmine themes
- added plugins option back in to allow specifying redmine plugins
- added database.socket option to allow mysql unix socket authentication
- added port option to allow specifying the port rails runs on
- cleaned up Gemfile so it is much less hacky
- switched to ruby version 2.4 by default as suggested by documentation http://www.redmine.org/projects/redmine/wiki/redmineinstall#Installing-Redmine
- fixed an annoyance (bug) in the service causing recursive symlinks
- fixed ownership bug on log files generated by redmine
- updates reflecting renames in nixos options
- added a nixos test
Dummy display manager that allows running X as a normal user.
The X server is started manually from a vt using `startx`.
Session startup commands must be provided by the user
in ~/.xinitrc, which is NOT automatically generated.
Previously you either had to set the setuid bit yourself or workaround
`isSystemUser = true` (for a loginable shell) to access the weechat
screen.
`programs.screen` shouldn't do this by default to avoid taking too much
assumptions about the setup, however `services.weechat` explicitly
requires tihs.
See #45728
Included changes:
* upstream repository has moved, URLs changed accordingly
* journaldriver bumped to new upstream release
The new release includes an important workaround for an issue that
could cause log-forwarding to fail after service restarts due to
invalid journal cursors being persisted.
The previous tentative to the fix got the order mixed up a bit. This
new fix has been re-verified to get them in the good order as per the
instructions in the following chapters.
This patch uses the library function `lib.escapeShellArg` to improve
the handling of shell aliases in the NixOS module `bash`, copying the
corresponding change made to the `zsh` module in commit
1e211a70cb (for which GitHub pull
request #47471 was filed).
This patch resolves GitHub issue #16973.
This change presumably also should be copied to the `fish` module, but
I don't know `fish` syntax so that won't be done by me.
GitHub: CloseNixOS/nixpkgs#16973.
When logging into a container by using
nixos-container root-login
all nix-related commands in the container would fail, as they
tried to modify the nix db and nix store, which are mounted
read-only in the container. We want nixos-container to not
try to modify the nix store at all, but instead delegate
any build commands to the nix daemon of the host operating system.
This already works for non-root users inside a nixos-container,
as it doesn't 'own' the nix-store, and thus defaults
to talking to the daemon socket at /nix/var/nix/daemon-socket/,
which is bind-mounted to the host daemon-socket, causing all nix
commands to be delegated to the host.
However, when we are the root user inside the container, we have the
same uid as the nix store owner, eventhough it's not actually
the same root user (due to user namespaces). Nix gets confused,
and is convinced it's running in single-user mode, and tries
to modify the nix store directly instead.
By setting `NIX_REMOTE=daemon` in `/etc/profile`, we force nix
to operate in multi-user mode, so that it will talk to the host
daemon instead, which will modify the nix store for the container.
This fixes#40355
Several service definitions used `mkEnableOption` with text starting
with "Whether to", which produced funny option descriptions like
"Whether to enable Whether to run the rspamd daemon..".
This commit corrects this, and adds short descriptions of services
to affected service definitions.
The problem was that the non-fatal warning was not omitted
from the output when constructing a nix expression.
Now it seems OK for me. When return code is OK,
the warnings don't get passed anywhere, but I expect
that won't matter for this utility. Fatal errors are still shown.
The tests in <nixos/tests/installer.nix> are using `parted`, so they are
bound to be better tested than `fdisk`.
This is brought on by a couple issues, plus reports on IRC that the
`fdisk` instructions didn't work as expected.
* #39354
* #46309
* #39942
* #45478
Care was taken so that the other documented steps did not need changes.
In all this kerfufle, a slight re-organization of the Chapter has been
made, allowing better deep linking.
While it seemingly brings more attention to the macOS notes with the
default docbook template, it better represents which parts of the
section are about macOS, and which parts are simply in the flow of the
text; otherwise the last paragraph may be lost into the details for
macOS.
as using /var/run now emits a warning by systemd's tmpfiles.d.
As /var/run is already a symlink to /run, this can't break anything, and
data does not need to be migrated.
The autoupgrade service defined in `system.autoUpgrade`
(`nixos/modules/installer/tools/auto-upgrade.nix`) doesn't have `su` in
its path and thus yields a warning during the `daemon-reload`.
Specifying the absolute path fixes the issue.
Fixes#47648
From commit b63f65aea0:
I used tmpfiles.d instead of activation snippets to create the logs.
It's good enough for upstream and other distros; it's probably good
enough for us.
The "reboot-wtmp" subtest fails because it it assumes that there is a
reboot record even on the initial boot. This is only the case if wtmp is
created within the activation script, but the implementation now uses
tmpfiles.d, so the creation of the file is done at a much later stage.
Apart from that, if you think about the state after the installation as
"first boot", using the term "reboot" wouldn't probably make sense
either.
So in our subtest, we now reboot the machine and check the wtmp record
afterwards as we did before.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @edolstra, @jameysharp, @Mic92
The init script slightly differs depending on which shell is in use.
So for bash it should be in the interactiveShellInit as well.
In this case we don't need a mkIf as `bash` is enabled by default
on NixOS.
We use `127.0.1.1` instead of `127.0.0.1` because some applications will fail if
`127.0.0.1` resolves to something other than `localhost`.
Debian does the same.
See #1248 and #36261.
Since `networking.hosts` is properly typed all of that magic `/etc/hosts` generator
does can be dropped. People that disagree with the value of `networking.hosts` can
simply `mkForce`.
This is necessary when system-wide dconf settings must be configured, i.e. to
disable GDM's auto-suspending of the machine when no user is logged in.
Related to https://github.com/NixOS/nixpkgs/issues/42053.
I think pam_lastlog is the only thing that writes to these files in
practice on a modern Linux system, so in a configuration that doesn't
use that module, we don't need to create these files.
I used tmpfiles.d instead of activation snippets to create the logs.
It's good enough for upstream and other distros; it's probably good
enough for us.
Nix 2.0 no longer uses these directories.
/run/nix/current-load was moved to /nix/var/nix/current-load in 2017
(Nix commit d7653dfc6dea076ecbe00520c6137977e0fced35). Anyway,
src/build-remote/build-remote.cc will create the current-load directory
if it doesn't exist already.
/run/nix/remote-stores seems to have been deprecated since 2014 (Nix
commit b1af336132cfe8a6e4c54912cc512f8c28d4ebf3) when the documentation
for $NIX_OTHER_STORES was removed, and support for it was dropped
entirely in 2016 (Nix commit 4494000e04122f24558e1436e66d20d89028b4bd).
The default value for journald's Storage option is "auto", which
determines whether to log to /var/log/journal based on whether that
directory already exists. So NixOS has been unconditionally creating
that directory in activation scripts.
However, we can get the same behavior by configuring journald.conf to
set Storage to "persistent" instead. In that case, journald will create
the directory itself if necessary.
Previously, the activation script was responsible for ensuring that
/etc/machine-id exists. However, the only time it could not already
exist is during stage-2-init, not while switching configurations,
because one of the first things systemd does when starting up as PID 1
is to create this file. So I've moved the initialization to
stage-2-init.
Furthermore, since systemd will do the equivalent of
systemd-machine-id-setup if /etc/machine-id doesn't have valid contents,
we don't need to do that ourselves.
We _do_, however, want to ensure that the file at least exists, because
systemd also uses the non-existence of this file to guess that this is a
first-boot situation. In that case, systemd tries to create some
symlinks in /etc/systemd/system according to its presets, which it can't
do because we've already populated /etc according to the current NixOS
configuration.
This is not necessary for any other activation script snippets, so it's
okay to do it after stage-2-init runs the activation script. None of
them declare a dependency on the "systemd" snippet. Also, most of them
only create files or directories in ways that obviously don't need the
machine-id set.
environment.sessionVariables cannot refer to the values of env vars,
and as a result this has caused problems in a variety of scenarios.
One use for these is that they're injected into /etc/profile,
elewhere these are used to populate an 'envfile' for pam
(`pam 5 pam_env.conf`) which mentions use of HOME being
potentially problematic.
Anyway if the goal is to make things easier for users,
simply do the NIX_PATH modification as extraInit.
This fixes the annoying problems generated by the current approach
(#40165 and others) while hopefully serving the original goal.
One way to check if things are borked is to try:
$ sudo env | grep NIX_PATH
Which (before this change) prints NIX_PATH variable with
an unexpanded $HOME in the value.
-------
This does mean the following won't contain user channels for 'will':
$ sudo -u will nix-instantiate --eval -E builtins.nixPath
However AFAICT currently they won't be present either,
due to unescaped $HOME. Unsure if similar situation for other users
of sessionVariables (not sudo) work with current situation
(if they exist they will regress after this change AFAIK).
Previously single quotes were used by default for aliases and the module
never warned about possible collisions when having a shell alias which
relies on single quotes.
Adding `escapeShellArg` works around this fixes the issue and ensures that a
properly quoted value is written to `/etc/zshrc`.
