- Move contents of README.md from
nixos/modules/installer/tools/manpages/ to
nixos/doc/manual/contributing-to-this-manual.chapter.md.
- Don't mention DocBook as its obsolete and too specific.
- Rename derivation attribute name of configuration.nix(5) manual page,
both on the `contributing-to-this-manual.chapter.md`, and in other
places.
Since each such `nixos-*` tool has it's own derivation, exposed in pkgs,
There is no point in separating the manuals from the packages. If
someone wishes to have the tools without the manuals, they can use
meta.outputsToInstall to disable the installation of the manpages of
these packages. This Fixes#244450.
After building the target system, `nixos-install` tries to remove `/mnt`
on the target filesystem. And the script may fail without any explanation,
if `/mnt` isn't empty.
This commit makes the installation process carry on even if there are
files under `/mnt`.
See https://github.com/NixOS/nixpkgs/issues/244643.
Although 'lib' isn't needed by the default configuration, new NixOS uses
can get confused when being recommended configuration.nix snippets like
systemd.services.NetworkManager-wait-online.enable = lib.mkForce false;
and have `sudo nixos-rebuild switch` fail with
error: undefined variable 'lib'
swraid support will now only be enabled by default if stateVersion is
older than 23.11. nixos-generate-config will now generate explicit
config for enabling support if needed.
This is copied from isoImage.squashfsCompression. It's useful to be
able to customise, as iteration cycles are very slow with xz, and
subjectively systems booted with less efficiently compressed squashfs
stores appear to have faster reads (although I didn't test that
scientificly so there could be other factors).
The single option tries to do too much work, which just ends up confusing people.
So:
- don't force the console font, the kernel can figure this out as of #210205
- don't force the systemd-boot mode, it's an awkward mode that's not supported
on most things and will break flicker-free boot
- add a separate option for the xorg cursor scaling trick and move it under the xorg namespace
- add a general `fonts.optimizeForVeryHighDPI` option that explicitly says what it does
- alias the old option to that
- don't set any of those automatically in nixos-generate-config
Guest operating systems inside VMs or containers can't update the host CPU's microcode for obvious security reasons, so setting the `hardware.cpu.*.updateMicrocode` options is pointless.
This change adds an option to disable legacy BIOS boot support for ISO
images. The implementation uses syslinux package that currently does not
support non-x86 platforms and thus cannot be cross-compiled, e.g. from
AArch64 system.
adding two graphical programs makes a strong assmuption that users will
use a graphical environment.
add a command line program as an alternative suggestion that is easy to
comment in as a first-steps measure.
This builds on top of nixpkgs mainline 00d8347180
with the following two PRs cherry-picked:
- https://github.com/NixOS/nixpkgs/pull/192670
- https://github.com/NixOS/nixpkgs/pull/192668
using the following command:
```
nix build -f nixos -L \
-I nixos-config=nixos/modules/installer/sd-card/sd-image-powerpc64le.nix \
config.system.build.sdImage
```
I was able to successfully boot the image, although it boots to a login prompt
rather than a shell, and won't accept the empty password for `root`. I guess
I'll have to figure out why that is.
To boot the image: `zstd`-decompress the it, mount it, and use `kexec`:
```
cd boot/nixos
kexec -l \
*-vmlinux \
--initrd *-initrd \
--dt-no-old-root \
--command-line="$(grep APPEND ../extlinux/extlinux.conf | sed 's_^ *APPEND *__')"
```
The machine I used for testing has only one storage device which is completely
allocated to LVM. It appears that the NixOS ISO loader doesn't look for
partition tables within LVM volumes. To work aroundn this, I had to extract the
`ext4` image within the partition table within the `sd-card` image and put that
in its own LVM volume. This likely won't be an obstacle for users who write the
image to a USB stick or similar.
According to the Unicode Standard, you should use U+2019 RIGHT SINGLE
QUOTATION MARK for apostrophes [1]. Before this change, some of the text
in this repo would use U+2018 LEFT SINGLE QUOTATION MARKs instead.
[1]: https://www.unicode.org/versions/Unicode15.0.0/ch06.pdf#G12411
This moves the creation of the bind mount inside the `nixos-enter`
invocation. The command are executed in an unshared mount namespace, so
they can be run as an unprivileged user.
Although we don't really need HTML documentation in the minimal installer,
not including it may cause annoying cache misses in the case of the NixOS manual.
When installing NixOS in the target filesystem /mnt, paths relative to
configuration.nix in `initrd.secrets` are turned by Nix into absolute
paths that reference /mnt. While building the system derivation works,
installing the bootloader fails because the latter process takes place
inside the chroot environment where /mnt does not exist.
Ideally, we would also build the system within chroot, but this greatly
complicates the matter as it requires manually copying over Nix, its
runtime dependencies and all channels. Possibly, this would also break
several assumptions users have about how nixos-install works.
A simpler and safer (but less neat) solution is to temporarily bind
mount all mount points in /mnt under /mnt/mnt to keep the paths
functional while the bootloader is being installed.
This is essentially the workaround described in issue #73404.
Due to missing `/etc/machine-id` in the new root, systemd-tmpfiles
outputs a bunch of scary warnings like "Failed to replace specifiers in
'/run/log/journal/%m'". We only care about /tmp, so hide them.
`-E` is an alias for `--exclude-prefix=/dev --exclude-prefix=/proc
--exclude-prefix=/run --exclude-prefix=/sys`.
Support for ZFS, while desirable, is problematic with newer kernel
releases. The stable ZFS release seldom supports the current newest
kernel version, and this makes the new_kernel image basically useless as
it cannot be published, and is not often built with new kernel releases.
This uses a dirty workaround to work around the fact it is impossible to
remove a list item from a modules system list type. Since ZFS support is
conditional to being supported on the current platform, we can fake ZFS
not being supported *for the no-zfs build only*. This overlay is only
added when evaluating the image, nothing else.
Support for ZFS, while desirable, is problematic with newer kernel
releases. The stable ZFS release seldom supports the current newest
kernel version, and this makes the new_kernel iso basically useless as
it cannot be published, and is not often built with new kernel releases.
This uses a dirty workaround to work around the fact it is impossible to
remove a list item from a modules system list type. Since ZFS support is
conditional to being supported on the current platform, we can fake ZFS
not being supported *for the no-zfs build only*. This overlay is only
added when evaluating the iso, nothing else.
Pin the `nixpkgs` registry entry to the *filtered* nixpkgs source to
avoid copying the entire `.git` directory to the ISO when building
from a local checkout.
Also set `to` directly instead of the `flake.outPath` hack.
This is done for sd-images only here, but should probably also be done
for dvd-images.
The --invariant arg should be a better way of making mkfs.vfat deterministic.
The previous version of invoking faketime was building fine and reproducible
when I was compiling an sdimage for aarch64 under emulation.
It was however still logging errors:
ERROR: ld.so: object '/nix/store/1c2cp2709kmvby8ql2n9946v7l52nn50-libfaketime-0.9.9/lib/libfaketime.so.1' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/nix/store/1c2cp2709kmvby8ql2n9946v7l52nn50-libfaketime-0.9.9/lib/libfaketime.so.1' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
The logged errors were presumably inaccurate somehow as calling
faketime was required for reproducibility, even though the log makes it
looks like it failed.
Within #193485 (and the previous changes) the internal structure of the
testing driver was changed. Since then, `makeTest` returns the
attributes for the VM test(s) (including `driverInteractive`) inside a
sub-attribute called `test`, so without this change running
`nixos-build-vms` would fail like this:
error: attribute 'driverInteractive' missing
Move already implemented functionality to the upper level so
it could be used in a more generic way.
Signed-off-by: Ivan Nikolaenko <ivan.nikolaenko@unikie.com>
this mostly means marking options that use markdown already
appropriately and making a few adjustments so they still render
correctly. notable for nftables we have to transform the md links
because the manpage would not render them correctly otherwise.
This is image media, so use the override level designed for it. As
detailed in the definition for mkImageMediaOverride:
> image media profiles can be derived by inclusion into host config,
> hence needing to override host config, but do allow user to mkForce
our xslt already replaces double line breaks with a paragraph close and
reopen. not using explicit para tags lets nix-doc-munge convert more
descriptions losslessly.
only whitespace changes to generated documents, except for two
strongswan options gaining paragraph two breaks they arguably should've
had anyway.
The `nixos-rebuild` tool calls `get-version-suffix` to figure out the
git revision of the nixpkgs directory if there is a .git.
https://nvd.nist.gov/vuln/detail/CVE-2022-24765 made git throw an
error if the .git search logic is not turned off and a user
tries to access a `.git` directory they don’t own (otherwise a
different user could trick them into setting arbitrary git config).
So from now on we should always explicitely set `--git-dir`, which
turns this search logic (and thus the security check) off.
The substr solution assumed a newline to be present.
The new solution will not remove the newline if it goes missing in the future.
Apparently this is idiomatic perl.
Thanks pennae for the suggestion!
`nixos/modules/installer/kexec/kexec-boot.nix` doesn't contain any
custom NixOS config, other than importing `netboot-minimal.nix` (which
imports `netboot-base.nix`, which imports `netboot.nix`.
`netboot.nix` really is just describing a self-contained system config,
running entirely off kernel and initrd, so we might as well move the
kexec script generation there as well.
`netboot.nix` already contains some `system.build` attributes.
Provide a `system.build.kexecTree` attribute (and `kexecScript` for
composability).
Previously, `makeInitrd` added the whole closure of the squashfs
derivation to initrd.
This closure contains the squashfs.img and some store paths which are
still referenced by the compressed squashfs.img.
These extra store paths are unused in stage 1.
With `makeInitrdNG` only the squashfs.img is added to the initrd.
(`makeInitrdNG` only resolves shared library references instead of the
whole closure).
This shrinks the netboot ramdisk by ~6% for a minimal system and
significantly decreases the size of the uncompressed root filesystem
in stage 1.
Very confusingly, the `isPowerPC` predicate in
`lib/systems/inspect.nix` does *not* match `powerpc64le`!
This is because `isPowerPC` is defined as
isPowerPC = { cpu = cpuTypes.powerpc; };
Where `cpuTypes.powerpc` is:
{ bits = 32; significantByte = bigEndian; family = "power"; };
This means that the `isPowerPC` predicate actually only matches the
subset of machines marketed under this name which happen to be 32-bit
and running in big-endian mode which is equivalent to:
with stdenv.hostPlatform; isPower && isBigEndian && is32bit
This seems like a sharp edge that people could easily cut themselves
on. In fact, that has already happened: in
`linux/kernel/common-config.nix` there is a test which will always
fail:
(stdenv.hostPlatform.isPowerPC && stdenv.hostPlatform.is64bit)
A more subtle case of the strict isPowerPC being used instead of the
moreg general isPower accidentally are the GHC expressions:
Update pkgs/development/compilers/ghc/8.10.7.nix
Update pkgs/development/compilers/ghc/8.8.4.nix
Update pkgs/development/compilers/ghc/9.2.2.nix
Update pkgs/development/compilers/ghc/9.0.2.nix
Update pkgs/development/compilers/ghc/head.nix
Since the remaining legitimate use sites of isPowerPC are so few, remove
the isPowerPC predicate completely. The alternative expression above is
noted in the release notes as an alternative.
Co-authored-by: sternenseemann <sternenseemann@systemli.org>
