Instead of intersecting system strings, we filter with the sort of
patterns used in `meta.platforms`.
Indicating this change `forTheseSystems` has been renamed to
`forMatchingSystems`, since the given list is now patterns to match, and
not the systems themselves. [Just as with `meta.platforms`, systems
strings are also supported for backwards compatibility.]
This is more flexible, and makes the `forMatchingSystems` and
packagePlatforms` cases more analogous.
Updated to the latest version of the nixos-v237 branch, which fixes two
things:
* Make sure that systemd looks in /etc for configuration files.
https://github.com/NixOS/systemd/pull/15
* Fix handling of the x-initrd.mount option.
https://github.com/NixOS/systemd/pull/16
I've added NixOS VM tests for both to ensure we won't run into
regressions. The newly added systemd test only tests for that and is by
no means exhaustive, but it's a start.
Personally I only wanted to fix the former issue, because that's the one
I've been debugging. After sending in a pull request for our systemd
fork (https://github.com/NixOS/systemd/pull/17) I got a notice from
@Mic92, that he already fixed this and his fix was even better as it's
even suitable for upstream (so we hopefully can drop that patch
someday).
The reason why the second one came in was simply because it has been
merged before the former, but I thought it would be a good idea to have
tests for that as well.
In addition I've removed the sysconfdir=$out/etc entry to make sure the
default (/etc) is used. Installing is still done to $out, because those
directories that were previously into sysconfdir now get into
factoryconfdir.
Quote from commit NixOS/systemd@98067cc806:
By default systemd should read all its configuration from /etc.
Therefore we rely on -Dsysconfdir=/etc in meson as default value.
Unfortunately this would also lead to installation of systemd's own
configuration files to `/etc` whereas we are limited to /nix/store. To
counter that this commit introduces two new configuration variables
`factoryconfdir` and `factorypkgconfdir` to install systemd's own
configuration into nix store again, while having executables looking
up files in /etc.
Tested this change against all of the NixOS VM tests we have in
nixos/release.nix. Between this change and its parent no new tests were
failing (although a lot of them were flaky).
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @Mic92, @tk-ecotelecom, @edolstra, @fpletz
Fixes: #35415Fixes: #35268
All 5 daemon types can be enabled and configured through the module and the module both creates the ceph.conf required but also creates and enables specific services for each daemon, based on the systemd service files that upstream provides.
The strongswan-swanctl systemd service starts charon-systemd. This implements a IKE daemon
very similar to charon, but it's specifically designed for use with systemd. It uses the
systemd libraries for a native integration.
Instead of using starter and an ipsec.conf based configuration, the daemon is directly
managed by systemd and configured with the swanctl configuration backend.
See: https://wiki.strongswan.org/projects/strongswan/wiki/Charon-systemd
Note that the strongswan.conf and swantctl.conf configuration files are automatically
generated based on NixOS options under services.strongswan-swanctl.strongswan and
services.strongswan-swanctl.swanctl respectively.
- split outputs (doc, man, out)
- a new runtime dependency on getconf
- fix up SCRIPTS_DIR in wrapper
- clean output folder of stray doc files
- add license & maintainer
Tested with `nixos/tests/rabbitmq.nix`, inside a docker image and manually.
novacom and novacomd build on aarch64, but the daemon
fails to start with something like:
novacomd[547]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x92000046
So, uh, nevermind that then.
This is unlikely to break and is a cheap test.
I'd like to be notified if it stops working.
If this ever blocks anything and I've been notified
you have my blessing to remove this as I doubt
many folks depend on it.
Currently, when building NixOS from a git clone, Nix has to copy
the entire repo at >1GB into the store by default. That is not
necessary and causes a dumping large path message.
If you need the old behaviour for some reason, you will have to
specify it by passing the path to your repo explicitly as the
nixpkgs argument like this:
--arg nixpkgs '{outPath = ./.; revCount = 56789; shortRev = "gfedcba"; }'
We had problems to get borg's own test suite running.
This test is intended to perform a quick smoke test to see whether we
have missed not any important dependency necessary to create backups
with borg.
tested with:
$ nix-build nixos/release.nix -A tests.borgbackup.x86_64-linux
The existing callSubTests seems to already have special-cased code to
allow enabling subtests on a single specific system by looking at the
`system` attribute in the test arguments. Replace it with a new version
similar to the callTestOnTheseSystems because:
- It's consistent with the existing functions for creating
system-specific tests (though admittedly, the callSubTests special
case for `system` predates them)
- This approach allows limiting to multiple system types, the previous
one inherently allows only one system type.
- This also fixes the problem that if you pass in e.g.
supportedSystems = [ "aarch64-linux" ], you end up with a
tests.chromium job that silently runs on x86_64-linux.
- Finally, this causes renames of the jobs like:
tests.chromium -> tests.chromium.x86_64-linux to be consistent with
the rest of the tests.
Currently, even if you pass supportedSystems = [ "aarch64-linux" ] you
end up with e.g. `nixos.tests.docker` which actually silently runs on
x86_64-linux. Using the new callTestOnTheseSystems fixes that.
As a side-effect, this also causes a rename of
`nixos.tests.docker` -> `nixos.tests.docker.x86_64-linux`, which is IMHO
a good thing since it's makes them consistent with the rest of the
tests.
Currently, even if you pass `supportedSystems = [ "aarch64-linux" ]` you
end up with e.g. `nixos.iso_graphical.x86_64-linux` job. Using
forTheseSystems from release-lib avoids that.
This shouldn't affect the usual x86 trunk-combined jobset.
To make the configuration of `yabar` more pleasant and easier to
validate, a NixOS module will be quite helpful.
An example config could look like this:
```
{
programs.yabar = {
enable = true;
bars.top.indicators.exec = "YA_DATE";
};
}
```
The module adds a user-controlled systemd service which runs `yabar` after
starting up X.
apps.plugin requires capabilities for full process monitoring. with
1.9.0, netdata allows multiple directories to search for plugins and the
setuid directory can be specified here.
the module is backwards compatible with older configs. a test is
included that verifies data gathering for the elevated privileges. one
additional attribute is added to make configuration more generic than
including configuration in string form.
This change adds a simple integration test exercising the fetchdocker
Nix code and hocker utilities for the simple `hello-world` docker
container. We exercise:
- Fetching the docker image configuration json
- Fetching the docker image layers
- Building a compositor script
- Loading the `hello-world` docker image into docker using the
compositor script and `docker load`
- Running that loaded container
* nghttpx: Add a new NixOS module for the nghttpx proxy server
This change also adds a global `uid` and `gid` for a `nghttpx` user
and group as well as an integration test.
* nixos/nghttpx: fix building manual
postage is no longer maintained and has been replaced by the identical pgmanage. See:
https://github.com/workflowproducts/postage#postage-has-been-replaced-with-pgmanage
The following error is raised when a user enables the deprecated `services.postage.enable` option:
Failed assertions:
- services.postage is deprecated in favor of pgmanage. They have the same options so just substitute postage for pgmanage.
* Don't set timezone when it's null
* Don't create the postgres role because the postgresqsl service
already does that.
* Fix documentation
* Add a test suite
Add postgis 2.4.0
doesn't remove v2.3.1. There are some big change in 2.4 that people may
don't want. see https://postgis.net/docs/release_notes.html#idm41021
fix test call
modify following recommandation of lsix
* Grants enough privileges to the configured user so that it can run
mysqldump.
* Adds a nixos test.
* Use systemd timers instead of a cronjob (by @fadenb).
* Creates a new user for backups by default, instead of using mysql
user.
* Ensures that backup user has write permissions on backup location.
* Write backup to a temporary file before renaming so that a failed
backup won't overwrite the previous backup, and so that the backup
location will never contain a partial backup.
Breaking changes:
* Renamed period to calendar to reflect the change in how to
configure the backup time.
* A failed backup will no longer result in cron sending an e-mail --
users' monitoring systems must be updated.
Resolves#24728
This option got introduced in 7904499542
and it didn't check whether mailUser and mailGroup are null, which they
are by default.
Now we're only creating the user if createMailUser is set in conjunction
with mailUser and the group if mailGroup is set as well.
I've added a NixOS VM test so that we can verify whether dovecot works
without any additional options set, so it serves as a regression test
for issue #29466 and other issues that might come up with future changes
to the Dovecot service.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Fixes: #29466
Cc: @qknight, @abbradar, @ixmatus, @siddharthist
The test here is pretty basic and only tests nginx, but it should get us
started to write tests for different webservers and different ACME
implementations.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This commit readds and updates the 1.x package from 1.1.4 to 1.1.6 which
also includes the needed command for migrating to 2.x
The module is adjusted to the version change, defaulting to radicale2 if
stateVersion >= 17.09 and radicale1 otherwise. It also now uses
ExecStart instead of the script service attribute. Some missing dots at
the end of sentences were also added.
I added a paragraph in the release notes on how to update to a newer
version.
An iso containing metadatas is created and attached as a cdrom to the
qemu VM used for this test.
The cloudinit service is enabled. The test case ensures the root
authorized_keys file is populated and the cloudinit write_file module is
working well.
This test exercises the linux_hardened kernel along with the various
hardening features (enabled via the hardened profile).
Move hidepid test from misc, so that misc can go back to testing a vanilla
configuration.
Upstream has decided to make -testing patches private, effectively ceasing
free support for grsecurity/PaX [1]. Consequently, we can no longer
responsibly support grsecurity on NixOS.
This patch turns the kernel and patch expressions into build errors and
adds a warning to the manual, but retains most of the infrastructure, in
an effort to make the transition smoother. For 17.09 all of it should
probably be pruned.
[1]: https://grsecurity.net/passing_the_baton.php
This is currently our default display manager, so I'm adding this to the
"tested" job as well to ensure we don't ship broken revisions where X is
most likely not working.
The test uses a custom SLiM theme that's specifically tailored for good
OCR results (mainly white background and black fonts without anything
else), because our default NixOS theme has a very small contrast between
background and fonts in some places.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
And adopt the tests to add an interface and remove it again.
It should work when deactivating rstp, it will not work when activating
rstp for the first bridge as then the userspace daemon is not yet
available. But once one bridge is active with stp, it should work with
the reload for any further bridge.
Fixes#21745. Also see #22547.
This reverts commit b806e25d65.
This seems to push Hydra's memory usage out of the roof fail nixos
evaluating with:
Too many heap sections: Increase MAXHINCR or MAX_HEAP_SECTS
Let's revert this for now. It's not a big deal at all since the
nixpkgs-unstable jobset is still building the packages.
The test starts the glance service, creates a nixos image and ensures Glance
list it.
Note the test also starts the Keystone service since it is required
by Glance.
Since 8180922d23, the cjdns module
imports from a derivation, which is very bad. It causes all of stdenv
to be built at evaluation time. Since we have a hard 3600 second limit
on Hydra evaluations, this was causing NixOS jobsets to time out.
@joachifm
Test that adding physical devices to containers works, find that network setup
then doesn't work because there is no udev in the container to tell systemd
that the device is present.
Fixed by not depending on the device in the container.
Activate the new container test for release
Bonds, bridges and other network devices need the underlying not as
dependency when used inside the container. Because the device is already
there.
But the address configuration needs the aggregated device itself.
It uses import-from-derivation, which is a bad thing, because this
causes hydra-evaluator to build Cassandra at evaluation time.
$ nix-instantiate nixos/release.nix -A tests.cassandra.i686-linux --dry-run
error: cannot read ‘/nix/store/c41blyjz6pfvk9fnvrn6miihq5w3j0l4-cassandra-2.0.16/conf/cassandra-env.sh’, since path ‘/nix/store/0j9ax4z8xhaz5lhrwl3bwj10waxs3hgy-cassandra-2.0.16.drv’ is not valid, at /home/eelco/Dev/nixpkgs/nixos/modules/services/databases/cassandra.nix:373:11
Also, the module is a mess (bad option descriptions, poor indentation,
a gazillion options where a generic "config" option would suffice, it
opens ports in the firewall, it sets vm.swappiness, ...).
The module will configure a Cassandra server with common options being
tweakable. Included is also a test which will spin up 3 nodes and
verify that the cluster can be formed, broken, and repaired.
With these changes, a container can have more then one veth-pair. This allows for example to have LAN and DMZ as bridges on the host and add dedicated containers for proxies, ipv4-firewall and ipv6-firewall. Or to have a bridge for normal WAN, one bridge for administration and one bridge for customer-internal communication. So that web-server containers can be reached from outside per http, from the management via ssh and can talk to their database via the customer network.
The scripts to set up the containers are now rendered several times instead of just one template. The scripts now contain per-container code to configure the extra veth interfaces. The default template without support for extra-veths is still rendered for the imperative containers.
Also a test is there to see if extra veths can be placed into host-bridges or can be reached via routing.
GoCD is an open source continuous delivery server specializing in advanced workflow
modeling and visualization. Update maintainers list to include swarren83. Update
module list to include gocd agent and server module. Update packages list to include
gocd agent and server package. Update version, revision and checksum for GoCD
release 16.5.0.
We already have a small regression test for #15226 within the swraid
installer test. Unfortunately, we only check there whether the md
kthread got signalled but not whether other rampaging processes are
still alive that *should* have been killed.
So in order to do this we provide multiple canary processes which are
checked after the system has booted up:
* canary1: It's a simple forking daemon which just sleeps until it's
going to be killed. Of course we expect this process to not
be alive anymore after boot up.
* canary2: Similar to canary1, but tries to mimick a kthread to make
sure that it's going to be properly killed at the end of
stage 1.
* canary3: Like canary2, but this time using a @ in front of its
command name to actually prevent it from being killed.
* kcanary: This one is a real kthread and it runs until killed, which
shouldn't be the case.
Tested with and without 67223ee and everything works as expected, at
least on my machine.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This partially reverts f2d24b9840.
Instead of disabling the channels via removing the channel mapping from
the tests themselves, let's just explicitly reference the stable test in
release.nix. That way it's still possible to run the beta and dev tests
via something like "nix-build nixos/tests/chromium.nix -A beta" and
achieve the same effect of not building beta and dev versions on Hydra.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
It's not the job of Nixpkgs to distribute beta versions of upstream
packages. More importantly, building these delays channel updates by
several hours, which is bad for our security fix turnaround time.
The Nix store squashfs is stored inside the initrd instead of separately
(cherry picked from commit 976fd407796877b538c470d3a5253ad3e1f7bc68)
Signed-off-by: Domen Kožar <domen@dev.si>
A small test which checks whether tasks can be synced using the
Taskserver.
It doesn't test group functionality because I suspect that they're not
yet implemented upstream. I haven't done an in-depth check on that but I
couldn't find a method of linking groups to users yet so I guess this
will get in with one of the text releases of Taskwarrior/Taskserver.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
A testcase each for
- declarative ipv6-only container
Seems odd to define the container IPs with their prefix length attached.
There should be a better way…
- declarative bridged container
Also fix the ping test by waiting for the container to start
When the ping was executed, the container might not have finished starting. Or
the host-side of the container wasn't finished with config. Waiting for
2 seconds in between fixes this.
I had the basic version of this laying around for some while but didn't
continue on it. Originally it was for testing support for the Neo layout
introduced back then (8cd6d53).
We only test the first three Neo layers, because the last three layers
are largely comprised of special characters and in addition to that the
support for the VT keymap seems to be limited compared to the Xorg
keymap.
Yesterday @NicolasPetton on IRC had troubles with the Colemak layout
(IRC logs: http://nixos.org/irc/logs/log.20160330, starting at 16:08)
and I found that test again, so I went for improving and adding to
<nixpkgs>.
While the original problem seemed to be related to GDM, we can still add
another subtest that checks whether GDM correctly applies the keyboard
layout. However I don't have a clue how to properly configure the
keyboard layout on GDM, at least not within the NixOS configuration.
The main goal of this test is not to test a complete set of all key
mappings but to check whether the keymap is loaded and working at all.
It also serves as an example for NixOS keyboard configurations.
The list of keyboard layouts is by no means complete, so everybody is
free to add their own to the test or improve the existing ones.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Probably not many people care about i686-linux any more, but building
all these images is fairly expensive (e.g. in the worst case, every
Nixpkgs commit would trigger a few gigabytes of uploads to S3).
Previously this was done in three derivations (one to build the raw
disk image, one to convert to OVA, one to add a hydra-build-products
file). Now it's done in one step to reduce the amount of copying
to/from S3. In particular, not uploading the raw disk image prevents
us from hitting hydra-queue-runner's size limit of 2 GiB.
This splits a few NixOS tests (namely Chromium, VirtualBox and the
networking tests) into several subtests that are exposed via attributes.
The networking tests were already split up but they didn't expose an
attribute set of available tests but used a function attribute to
specify the resulting test instead.
A new function callSubTests in nixos/release.nix is now responsible for
gathering subtests, which is also used for the installer and boot tests.
The latter is now placed in a tests.boot.* namespace rather than
"polluting" the tests attribute set with its subtest.
This makes it easier to test just a specific channel rather than to
force testing all builds down the users/testers throat. Especially this
makes it easier to test NixOS channel upgrades only against the Chromium
stable channel instead of just removing the beta/dev channels from the
tests entirely (as done in 69ec09f38a).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Should clean up a lot of these redundant lines for various sub-tests.
Note that the tests.boot* are now called tests.boot.boot*, but otherwise
all the test attribute names should stay the same.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra
Cc: @wkennington
Cc: @bobvanderlinden
This should de-clutter the various redundant lines of callTest's on
subtests so that every main test file should have only one line with a
callSubTests instead.
Overrides work the same way as callTest, except that if the system
attribute is explicitly specified we do not generate attributes for all
available systems.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra
Now subtests are separate derivations, because the individual tests do
not depend on state from previous test runs.
This has the advantage that it's easier to run individiual tests and
it's also easier to pinpoint individual tests that randomly fail.
I ran all of these tests locally and they still succeed.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
- Enforce that an option declaration has a "defaultText" if and only if the
type of the option derives from "package", "packageSet" or "nixpkgsConfig"
and if a "default" attribute is defined.
- Enforce that the value of the "example" attribute is wrapped with "literalExample"
if the type of the option derives from "package", "packageSet" or "nixpkgsConfig".
- Warn if a "defaultText" is defined in an option declaration if the type of
the option does not derive from "package", "packageSet" or "nixpkgsConfig".
- Warn if no "type" is defined in an option declaration.
The manuals are now evaluated with each derivation in `pkgs` (recursively)
replaced by a fake with path "\${pkgs.path.to.the.attribute}".
It isn't perfect, but it seems to cover a vast majority of use cases.
Caveat: even if the package is reached by a different means,
the path above will be shown and not e.g. `${config.services.foo.package}`.
As before, defaults created by `mkDefault` aren't displayed,
but documentation shouldn't (mostly) be a reason to use that anymore.
Note: t wouldn't be enough to just use `lib.mapAttrsRecursive`,
because derivations are also (special) attribute sets.
