And adopt the tests to add an interface and remove it again.
It should work when deactivating rstp, it will not work when activating
rstp for the first bridge as then the userspace daemon is not yet
available. But once one bridge is active with stp, it should work with
the reload for any further bridge.
Fixes#21745. Also see #22547.
Run Firefox inside an XTerm, it doesn't crash mysteriously this way.
Also try opening developer tools and checking that Firefox doesn't
crash in the process.
* Moved the wordpress sources derivation to the attribute pkgs.wordpress. This
makes it easier to override.
* Also introduce the `package` option for the wordpress virtual host config which
defaults to pkgs.wordpress.
* Also fixed the test in nixos/tests/wordpress.nix.
After the change of the bonding options, the examples were not quite correct.
The diff is over-the top because the new `let` needs everything indented.
Also add a small docstring to the `networkd` attr in the networking test.
We now make it happen later in the boot process so that multi-user
has already activated, so as to not run afoul of the logic in
switch-to-configuration.pl. It's not my favorite solution, but at
least it works. Also added a check to the VM test to catch the failure
so we don't break in future.
Fixes#23121
This subtest actually serves two purposes:
1. Test manual PKI configuration
2. Test changing of configuration files
In order to only test manual PKI configuration it would have been enough
to just add another server with a manual config.
But as the switch from automatic PKI config to manual config is probably
one of the most fundamental changes in configuration, so it serves
*very* well to also check whether changes in the NixOS configuration
actually have an impact in the real system.
So instead of adding another server, we now create a dummy "newServer"
machine, which is the new configuration for "server" and use
switch-to-configuration to switch "server" to the config of "newServer".
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
reason: after the upgrade of iputils from 20151218 to 20161105
functionality of ping6 and tracepath6 was merged into ping and tracepath.
Ping is now mostly a drop-in replacment for ping6, except that selecting a
specific interface is done by encoding it into the address (ex.: fe80::1%eth0)
rather then specifing it with the `-I` flag.
Until now the four attributes available very selectively provided a small
subset, while copying upstream documentation.
We make driver options an arbitrary key-value set and point to kernel
documentation, which is always up-to-date. This way every option can be set.
The four already existing options are deprecated with a warning.
The tests have failed because Chromium has started up displaying the
following error message in a dialog window:
Chromium can not be run as root.
Please start Chromium as a normal user. If you need to run as root for
development, rerun with the --no-sandbox flag.
So let's run as user "alice" and pass all commands using the small
helper function "ru" (to keep it short, it's for "Run as User").
Tested it by running the "stable" test on x86_64-linux.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Reported-by: @globin
The test starts the glance service, creates a nixos image and ensures Glance
list it.
Note the test also starts the Keystone service since it is required
by Glance.
All the new options in detail:
Enable docker in multi-user.target make container created with restart=always
to start. We still want socket activation as it decouples dependencies between
the existing of /var/run/docker.sock and the docker daemon. This means that
services can rely on the availability of this socket. Fixes#11478#21303
wantedBy = ["multi-user.target"];
This allows us to remove the postStart hack, as docker reports on its own when
it is ready.
Type=notify
The following will set unset some limits because overhead in kernel's ressource
accounting was observed. Note that these limit only apply to containerd.
Containers will have their own limit set.
LimitNPROC=infinity
LimitCORE=infinity
TasksMax=infinity
Upgrades may require schema migrations. This can delay the startup of dockerd.
TimeoutStartSec=0
Allows docker to create its own cgroup subhierarchy to apply ressource limits on
containers.
Delegate=true
When dockerd is killed, container should be not affected to allow
`live restore` to work.
KillMode=process
The use of unionfs-fuse (57a0f14064)
slows down the KDE 5 test enough that it hits Hydra timeouts. (E.g. on
my laptop it went from ~5 min to ~30 min.) So disable it for the KDE
test.
http://hydra.nixos.org/build/45127422
(cherry picked from commit 3fcbcf2556)
Found out during testing of the Tesseract upgrade the kde5 and sddm
tests don't actually use OCR, so let's disable support for it.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @ttuegel
A secret can be stored in a file. It is written at runtime in the
configuration file.
Note it is also possible to write them in the nix store for dev
purposes.
This commit introduces a nixos module for the Openstack Keystone
service. It also provides a optional bootstrap step that creates some
basic initial resources (tenants, endpoints,...).
The provided test starts Keystone by enabling bootstrapping and checks
if user creation works well.
This commit is based on initial works made by domenkozar.
$getter can be used once ipfs supports private/local networks
and or internet gets routed to the VMs
Signed-off-by: Maximilian Güntner <code@klandest.in>
Allows one or more directories to be mounted as a read-only file system.
This makes it convenient to run volatile containers that do not retain
application state.
This reverts commit daf3ba426b.
This is an alternative to 0ba3d429a7,
which disables the test outright. Briefly, exercising builders which
rely on import-from-derivation can cause Hydra jobsets to time out.
Sometimes it happens that the "Type to search or enter a URL to
navigate" popup doesn't show, but all we need to know at this time is
whether Chromium has finished starting up.
So checking for the "startup done" page is a better option here.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The motivation for this change is the following: As gnu-netcat,
e. g. does not support ipv6, it is not suitable as default netcat.
This commit also fixes all obvious build issues caused by this change.
The test complains[1][2] that
Failed to start message bus: Failed to bind socket "/run/dbus/system_bus_socket": No such file or directory
In 639e5401ff, the dbus socket dir is set
to `/run/dbus`; in the test vm `/var/run/dbus` is used, but the standard
`/run -> /var/run` link is typically not created until stage 2 init, not
in the minimal init used here. Thus, dbus fails to run within the test
environment . Fix by changing `/var/run/dbus` to simply `/run/dbus`.
[1]: https://hydra.nixos.org/build/42534725
[2]: https://hydra.nixos.org/build/42523834
Since 97bfc2fac9, runCommand doesn't
include a compiler anymore. So let's switch to the new runCommandCC,
which resembles the old state.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The initial commit accidentally left in some commented code and if you were
using alerts, they simply didn't work.
Smokeping also includes some JS code for the webui allowing you to zoom into
graphs and it was not passed into the homedir. Additionally, generate
static html pages for other webservers to serve the cache directory.
Add additional options to specify sendmail path or mailhost and verify that both
are not set.
Add one extra config hook that allows you to bypass all of the invidual config
stanzas and just hand it a string.
Now the tracking works with aggregated devices on aggregated devices.
So container with physical device where the device is put in a bond
which is the basis for a bridge is now handled correctly.
Test that adding physical devices to containers works, find that network setup
then doesn't work because there is no udev in the container to tell systemd
that the device is present.
Fixed by not depending on the device in the container.
Activate the new container test for release
Bonds, bridges and other network devices need the underlying not as
dependency when used inside the container. Because the device is already
there.
But the address configuration needs the aggregated device itself.
This ensures that most "trivial" derivations used to build NixOS
configurations no longer depend on GCC. For commands that do invoke
gcc, there is runCommandCC.
* influxdb module: add postStart
* cadvisor module: increase TimeoutStartSec
Under high load, the cadvisor module can take longer than the default 90
seconds to start. This change should hopefully fix the test on Hydra.
This introduces VirtualBox version 5.1.6 along with a few refactored
stuff, notably:
* Kernel modules and user space applications are now separate
derivations.
* If config.pulseaudio doesn't exist in nixpkgs config, the default is
now to build with PulseAudio modules.
* A new updater to keep VirtualBox up to date.
All subtests in nixos/tests/virtualbox.nix succeed on my machine and
VirtualBox was reported to be working by @DamienCassou (although with
unrelated audio problems for another fix/branch) and @calbrecht.
One reason why it took me so long for debugging the test failure with
systemd-detect-virt was that simple-cli has succeeded while the former
has not.
This now makes sure we have consistency accross all the subtests and if
problems like the one in the previos commit ever show up again, we will
have just the headless test succeeding and it's more obvious where the
actual problem resides.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We don't have (simulated) sound hardware within the qemu VM, neither do
we have it available within VirtualBox that's running within the qemu
VMs.
With sound hardware the VirtualBox UI displays an error dialog, which in
turn causes the VM process to hang on unregister. This in turn has
caused the tests to fail because of the following error:
Cannot unregister the machine '...' while it is locked
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Using waitUntilSucceeds for testing whether the shutdown signalling
files have vanished is quite noisy because it prints two lines for every
try. This is now fixed with a while loop on the guest VM which does the
same check but with only one output for the command that's executed and
another one when the conditions are met.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
- logDriver option, use journald for logging by default
- keep storage driver intact by default, as docker has sane defaults
- do not choose storage driver in tests, docker will choose by itself
- use dockerd binary as "docker daemon" command is deprecated and will be
removed
- add overlay2 to list of storage drivers
modify tests to not fail if the event handlers are
registered too slowly or if the wrong window is in focus
(cherry picked from commit e087b0d12f)
Signed-off-by: Domen Kožar <domen@dev.si>
The loopback-based tests use a storage size of 102400 blocks (one block
is 1024 bytes), which doesn't seem to fit for btrfs volumes in recent
btrfs versions. I'm setting this to 409600 (400 MB) now so that it
should be enough for later versions in case they need even more space
for subvolumes.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Follow-up to the following commits:
abdc5961c3: Fix starting the firewall
e090701e2d: Order before sysinit
Solely use sysinit.target here instead of multi-user.target because we
want to make sure that the iptables rules are applied *before* any
socket units are started.
The reason I've dropped the wantedBy on multi-user.target is that
sysinit.target is already a part of the dependency chain of
multi-user.target.
To make sure that this holds true, I've added a small test case to
ensure that during switch of the configuration the firewall.service is
considered as well.
Tested using the firewall NixOS test.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra
Fixes#15512 and #16032
With the multi output, postgresql cannot find at runtime what is its
basedir when looking for libdir and pkglibdir. This commit fixes that.
- Agent now takes a full URL to the Go.CD server
- Instruct the agent to attempt restart every 30s upon failure
- Test's Accept header did not match the server's expectation
- Replace the tests' complex Awk matches with calls to `jq`
Update gocd-agent package version to 16.6.0-3590 including new sha. Modify heapSize
and maxMemory mkOption to accurately reflect their intended purpose of configuring
initial java heap sizes.
The module will configure a Cassandra server with common options being
tweakable. Included is also a test which will spin up 3 nodes and
verify that the cluster can be formed, broken, and repaired.
With these changes, a container can have more then one veth-pair. This allows for example to have LAN and DMZ as bridges on the host and add dedicated containers for proxies, ipv4-firewall and ipv6-firewall. Or to have a bridge for normal WAN, one bridge for administration and one bridge for customer-internal communication. So that web-server containers can be reached from outside per http, from the management via ssh and can talk to their database via the customer network.
The scripts to set up the containers are now rendered several times instead of just one template. The scripts now contain per-container code to configure the extra veth interfaces. The default template without support for extra-veths is still rendered for the imperative containers.
Also a test is there to see if extra veths can be placed into host-bridges or can be reached via routing.
