The initial intent was to strip .a and .o files, not .a.o files.
While at it expanded stripping for $lib output as well.
Without the change `libgcc.a` was not stripped and `.debug*` sections
made into final binaries. It's not a problem on it's own, but it's an
unintended side-effect. Noticed on `crystal_1_0` test failure where
`crystal` was not able to handle `dwarf-5`.
While at it allowed absolute file names to be passed to stripDebugList
and friends.
The --self-contained and --no-self-contained switches were
added to the dotnet build command starting with .NET 6.
The switch is equivalent to the setting the SelfContained
property, so we use the property for backwards compatibility.
Now the tool will only strip binaries if a strip executable is passed
via the STRIP environment variable. This is exposed via the strip
option for makeInitrdNG and the NixOS option boot.initrd.systemd.strip.
We are replicating one mechanism behind `-Z build-std`.
There isn't yet crate2nix support for this, but one can (and I do) add
the missing stdlib deps (for this feature to pick up) with overrides.
POSIX sh (and `bash`) impose a restriction on environment variable name
format and disallow hypheps in the names. Normally it's not a problem
as nothing usually tries to refer nyphenated names.
One exception is `nix develop` (https://github.com/NixOS/nix/issues/6848):
$ nix develop -f. gcc -L
gcc-wrapper> ...-get-env.sh: line 70: expand-response-params: bad substitution
Note that bash usually uses explicitly created `expandResponseParams`
variant of the same variable.
To work the problem around let's avoid environment variable export and move
it to `passthru` for `cc` (used ina few places) and remove it completely for
`binutils` (does not seem to be used at all).
A full check would be more complicated to write -
and more importantly - probably also more expensive.
Motivation: eval-time catch for errors like in commit 8198636be0.
'strip' does not normally preserve archive index in .a files.
This usually causes linking failures against static libs like:
$ nix build --no-link -f. pkgsCross.mingw32.re2c
> ...-i686-w64-mingw32-binutils-2.38/bin/i686-w64-mingw32-ld:
/nix/store/...-i686-w64-mingw32-stage-final-gcc-13.0.0-lib/i686-w64-mingw32/lib/libstdc++.dll.a:
error adding symbols: archive has no index; run ranlib to add one
We restore the index by running ranlib explicitly.
This change mimics existing strip{All,Debug}List variables to
allow special stripping directories just for Target.
The primary use case in mind is gcc where package has to install
both host and target ELFs. They have to be stripped by their own
strip tools accordingly.
Co-authored-by: Rick van Schijndel <Mindavi@users.noreply.github.com>
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
In some cases `$pkgs_src` can be a path. For example with `FSharp.Core` when it comes with dotnet SDK.
In these cases we need to fallback on default URL otherwise curl fails.
Without this change cross-built gcc fails to detect stack protector style:
$ nix log -f pkgs/stdenv/linux/make-bootstrap-tools-cross.nix powerpc64le.bootGCC | fgrep __stack_chk_fail
checking __stack_chk_fail in target C library... no
checking __stack_chk_fail in target C library... no
It happens because gcc treats search paths differently:
https://gcc.gnu.org/git/?p=gcc.git;a=blob;f=gcc/configure.ac;h=446747311a6aec3c810ad6aa4190f7bd383b94f7;hb=HEAD#l2458
if test x$host != x$target || test "x$TARGET_SYSTEM_ROOT" != x ||
test x$build != x$host || test "x$with_build_sysroot" != x; then
...
if test "x$with_build_sysroot" != "x"; then
target_header_dir="${with_build_sysroot}${native_system_header_dir}"
elif test "x$with_sysroot" = x; then
target_header_dir="${test_exec_prefix}/${target_noncanonical}/sys-include"
elif test "x$with_sysroot" = xyes; then
target_header_dir="${test_exec_prefix}/${target_noncanonical}/sys-root${native_system_header_dir}"
else
target_header_dir="${with_sysroot}${native_system_header_dir}"
fi
else
target_header_dir=${native_system_header_dir}
fi
By passing --with-build-sysroot=/ we trick cross-case to use
`target_header_dir="${with_sysroot}${native_system_header_dir}"`
which makes it equivalent to non-cross
`target_header_dir="${with_build_sysroot}${native_system_header_dir}"`
Tested the following setups:
- cross-compiler without libc headers (powerpc64le-static)
- cross-compiler with libc headers (powerpc64le-debug)
- cross-build compiler with libc headers (powerpc64le bootstrapTools)
Before the change only 2 of 3 compilers detected libc headers.
After the change all 3 compilers detected libc headers.
For darwin we silently ignore '-syslibroot //' argument as it does not
introduce impurities.
While at it dropped mingw special case for no-libc build. Before the change
we passed both '--without-headers --with-native-system-headers-dir' for
no-libc gcc-static builds. This tricked darwin builds to find sys/sdt.h
and fail inhibid_libc builds. Now all targets avoid passing native headers
for gcc-static builds.
While at it fixed correct headers passing to
--with-native-system-headers-dir= in host != target case: we were passing
host's headers where intention was to pass target's headers.
Noticed the mismatch as a build failure on pkgsCross.powernv.stdenv.cc
on darwin where `sys/sdt.h` is present in host's headers (libSystem)
but not target's headers (`glibc`).
Co-authored-by: Adam Joseph <54836058+amjoseph-nixpkgs@users.noreply.github.com>
Since 1ac53985 "*-wrapper; Switch from `infixSalt` to `suffixSalt`"
(2020) 'TARGET_' prefix (and infix) is no more. '_FOR_TARGET' suffix
is the only used suffix for target-specific tools and flags.
Use that in stip instead of always-empty variable.
this shouldn't change any binary available in the default build environment
because bintools-unwrapped is already in path ( idk where it comes from but i know because objcopy is in path but not in the wrapper )
this just makes all the binaries available under 'bintools' instead of
having to use 'bintools-unwrapped'
reduces confusion because now 'objcopy' and others will be in 'bintools'
A function to generate pkg-config files for Nix packages that need to create them ad hoc,
like blas and lapack.
Inspiration taken from `makeDesktopItem`.
Currently when cross compiling the `buildPackages.libredirect` has the wrong dynamic library extension.
To reproduce the issue run something like:
```
file $(nix-build -A pkgsCross.mingwW64.buildPackages.libredirect)/lib/libredirect.dll
/nix/store/80llmqa9lkabg3qnmglngzz22fwf739q-libredirect-0/lib/libredirect.dll: Mach-O 64-bit dynamically linked shared library x86_64
```
or
```
nix-diff $(nix-instantiate -A libredirect) $(nix-instantiate -A pkgsCross.mingwW64.buildPackages.libredirect)
```
By default, Cargo will only enable line tables. -g enables full debug
info. The RUSTFLAGS environment variable is examined by Cargo,
similar to how the NIX_*FLAGS* variables are examined by our compiler
wrappers.
Before this change `srcOnly git` gives:
duplicate derivation output 'debug', at pkgs/stdenv/generic/make-derivation.nix:270:7
This was because separateDebugInfo = true was passed on to the srcOnly
mkDerivation as well as the outputs list _including_ the debug output.
Luckily we don't need to untangle this mess since srcOnly is only
supposed to have a single output anyways.
Transform exit handlers of the form
trap cleanup EXIT [INT] [TERM] [QUIT] [HUP] [ERR]
(where cleanup is idempotent)
to
trap cleanup EXIT
This fixes a common bash antipattern.
Each of the above signals causes the script to exit. For each signal,
bash first handles the signal by running `cleanup` and then runs
`cleanup` again when handling EXIT.
(Exception: `vscode/*` prevents the second run of `cleanup` by removing
the trap in cleanup`).
Simplify the cleanup logic by just trapping exit, which is always run
when the script exits due to any of the above signals.
Note: In case of borgbackup, the exit handler is not idempotent, but just
trapping EXIT guarantees that it's only run once.
Some haskell code starts silently hanging when not built with a
threaded runtime, so let’s assume people using `writeHaskell` don’t
care about micro-optimizations like this and do the expected thing.
Some architectures don’t support a threaded runtime, for these we
provide the `threadedRuntime` option to turn it off (it should fail at
build time in that case, easy to detect).
If somebody already passed `"-threaded"` before via ghcArgs, this
will not add the flag a second time. Thus it’s backward-compatible in
this regard.
I tested out both branches (with `-threaded` set and not set before),
on an example I had where the runtime would hang when not compiled
with `-threaded`.
Sometimes I want to pass a different implementation of `mkNugetDeps`.
For example in private repos, it can be handy to use `__noChroot = true`
and bypass the deps.nix generation altogether. Or some Nuget packages
ship with ELF binaries that need to be patched, and that's best done as
soon as possible.
If the package was not restored from nuget.org (determinted by checking
the "source" field of ".nupkg.metadata"), query the custom source for
the package endpoint (the way nuget api is built we can't determine it
without an API query) and build a custom package URL to save in the
generated deps file.
Noticed this bug when was trying to bootstrap m4 on darwin. That fixes
line 163: no such file or directory error
That does not solve all problems staging has on darwin.
