- drop media-session (rip 💀)
- stop trying to let people override default configs, those never got merged correctly
- drop all the complexity arising from having to vendor default config files
- build docs in sandbox as we no longer recurse
This patch fixes two issues:
1. The file in which environment variables are set is inconsistent.
- This file sets them in zprofile when programs.zsh.enable is not
set.
- Zsh module sets them in zshenv when programs.zsh.enable is set.
2. Setting environment variables in zprofile overrides what users set
in .zshenv. See these[1] home-manager[2] issues[3].
/etc/profile is also changed to /etc/set-environment. Here is a
comparison:
Using /etc/profile:
- Pros
- config.environment.shellInit is sourced in all zsh
- Cons
- config.environment.loginShellInit is also sourced in non-login zsh
- config.programs.bash.shellInit is also sourced in all zsh
- config.programs.bash.loginShellInit is also sourced in all zsh
Using /etc/set-environment:
- Pros
- config.programs.bash.shellInit is not sourced in any zsh
- config.programs.bash.loginShellInit is not sourced in any zsh
- Cons
- config.environment.shellInit is not sourced in any zsh
- config.environment.loginShellInit is not sourced in any zsh
[1]: https://github.com/nix-community/home-manager/issues/2751#issuecomment-1048682643
[2]: https://github.com/nix-community/home-manager/issues/2991
[3]: https://github.com/nix-community/home-manager/issues/3681#issuecomment-1436054233
Effectively removes support for the following hashing algorithms
as announced in the NixOS 22.11 release notes:
- bcrypt_x ($2x$)
- sha256crypt ($5$)
- sha1crypt ($sha1$)
- sunmd5 ($md5$)
- md5crypt ($1$)
- nt ($3$)
- bdiscrypt (_)
- bigcrypt (:)
- descrypt (:)
And exposes the crypt scheme ids for enabled algorithms, so they can be
reused for validation in the users-groups module.
- Christmas is over!
- Upstream has changed the name of the target triplet used for the JS
backend from js-unknown-ghcjs to javascript-unknown-ghcjs, since Cabal
calls the architecture "javascript":
6636b67023
Since the triplet is made up anyways, i.e. autoconf does not support
it and Rust uses different triplets for its emscripten backends, we'll
just change it as well.
- Upstream fixed the problem with ar(1) being invoked incorrectly by stage0:
e987e345c8
systemd v253 changelog/NEWS:
https://github.com/systemd/systemd/blob/v253/NEWS
NixOS changes:
0007-hostnamed-localed-timedated-disable-methods-that-cha.patch was
dropped, because systemd gained support to handle read-only /etc.
*-add-rootprefix-to-lookup-dir-paths.patch required some updates too,
as src/basic/def.h moved to src/basic/constants.h.
systemd/systemd#25771 switched p11kit to become
dlopen()'ed, so we need to patch that path.
added a note to the 23.05 release notes to recommend `nixos-rebuild boot`
Co-authored-by: Florian Klink <flokli@flokli.de>
* k3s: add environmentFile option
Enabling to include secrets through configuration such as 'sops'
* Update nixos/doc/manual/release-notes/rl-2305.section.md
Co-authored-by: Jairo Llopis <973709+yajo@users.noreply.github.com>
Update protonmail-bridge to v3. This also rename the CLI executable from
protonmail-bridge to bridge to be more in line with upstream naming.
Co-authored-by: James Landrein <github@j4m3s.eu>
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
Upstream has officially abandoned the project as of 2021 [0], there's been
no release since 2016, it uses the EoL Qt 4, and alternatives like
KeePassXC exist.
Also move KeePassXC to its own directory -- it doesn't make sense to
have it in KeePassX's folder anymore.
[0]: https://www.keepassx.org/index.html%3Fp=636.html
Provide a module to configure Coqui TTS, available as `tts` in nixpkgs
for a few releases already.
The module supports multiple servers in parallel, so multiple languages
and testing scenarios can be covered, without affecting any production
usage.
This patch provides input arguments `newuidmapPath` and `newgidmapPath`
for apptainer and singularity to specify the path to the SUID-ed executables
newuidmap and newgidmap where they are not available from the FHS PATH.
As NixOS places those suided executables in a non-FHS position
(/run/wrapper/bin), this patch provides
programs.singularity.enableFakeroot option and implement with the above
input parameters.
Upstream changes:
singularity 3.8.7 (the legacy) -> apptainer 1.1.3 (the renamed) / singularity 3.10.4 (Sylabs's fork)
Build process:
* Share between different sources
* Fix the sed regexp to make defaultPath patch work
* allowGoReference is now true
* Provied input parameter removeCompat (default to false)
that removes the compatible "*singularity*" symbolic links
and related autocompletion files when projectName != "singularity"
* Change localstatedir to /var/lib
* Format with nixpkgs-fmt
* Fix the defaultPath patching
and use it instead of the `<executable> path` config directive
deprecated in Apptainer
* Provide dependencies for new functionalities such as
squashfuse (unprivileged squashfs mount)
* Provide an attribute `defaultPathInputs` to override
prefix of container runtime default PATH
NixOS module programs.singularity:
* Allow users to specify packages
* Place related directories to /var/lib
* Format with nixpkgs-fmt
singularity-tools:
* Allow users to specify packages
* Place related directories to /var/lib when building images in VM
This commit changes from a precompiled bundle to
a source file. Accordingly, the expression file is renamed to `default.nix`
and the old attribute name is changed to `tvbrowser`, the old one being now a
throw-message.
The upstream build script tries to download the news plugin; so, we provide
this and pass it as a parameter.
Given that this is still a piece of a precompiled Java bytecode, along with a
main readable source bundle, `meta.sourceProvenance` is updated accordingly.
As announced in the NixOS 22.11 release notes, 23.05 will switch NixOS
to using nsncd (a non-caching reimplementation in Rust) as NSS lookup
dispatcher, instead of the buggy and deprecated glibc-provided nscd.
If you need to switch back, set `services.nscd.enableNsncd = false`, but
please open an issue in nixpkgs so your issue can be fixed.
...for explicitly named network interfaces
This reverts commit 6ae3e7695e.
(and evaluation fixups 08d26bbb727aed90a969)
Some of the tests fail or time out after the merge.
Wordpress bundles some non-essential plugins and themes, then pesters
users to upgrade them. As we make the whole webroot readonly, it is
not possible to trivially delete them. Instead we should have users
explicitly install plugins via the existing nixos module.
In an effort to better encode version strings and use descriptive pnames
that do not conflict with top level pkgs, we currently use
wordpress-${type}-${pname} for pname. This is good for the nix store,
but when we synthesize the wordpress derivation in our module, we reuse
this pname for the output directory.
Internally wordpress can handle this fine, since plugins must register
via php, not directory. Unfortunately, many plugins like civicrm and
wpforms-lite are designed to rely upon the name of their install
directory for homing or discovery.
As such, we should follow both the upstream convention and
services.nextcloud.extraApps and use an attribute set for these options.
This allows us to not have to deal with the implementation details of
plugins and themes, which differ from official and third party, but also
give users the option to override the install location. The only issue
is that it breaks the current api.
Without this commit, unsetting any of the `services.kubo.settings` options does not reset the value back to the default. This commit gets rid of this statefulness.
This is achieved by generating the default config, applying the user specified config options to it and then patching the `Identity` and `Pinning` config options from the old config back in. This new config is then applied using `ipfs config replace`.
The only remaining stateful parts of the config are the `Identity` and `Pinning.RemoteServices` settings as those can't be changed with `ipfs config replace`. `Pinning.RemoteServices` also contains secrets that shouldn't be in the Nix store. Setting these options wasn't possible before as it would result in an error when the daemon tried to start. I added some assertions to guard against this case.
Trivial conflict in release notes, except that the xml/docbook parts
are horrible for (semi-)automatic conflict resolution.
Fortunately that's generated anyway.
Adds a new option to the virtualisation modules that enables specifying
explicitly named network interfaces in QEMU VMs. The existing
`virtualisation.vlans` is still supported for cases where the name of
the network interface is irrelevant.
`autosuspend` is a daemon that periodically runs user-defined checks to
verify whether the system should be suspended. It's already available
in nixpkgs. This adds a NixOS module which starts the daemon as a
systemd service.
Co-authored-by: pennae <82953136+pennae@users.noreply.github.com>
following the plan in https://github.com/NixOS/nixpkgs/pull/189318#discussion_r961764451
also adds an activation script to print the warning during activation
instead of during build, otherwise folks using the new CLI that hides
build logs by default might never see the warning.
This commit fixes a papercut in nixos-rebuild where people wanting to
switch to a specialisation (or test one) were forced to manually figure
out the specialisation's path and run its activation script - since now,
there's a dedicated option to do just that.
This is a backwards-compatible change which doesn't affect the existing
behavior, which - to be fair - might still be considered sus by some
people, the painful scenario here being:
- you boot into specialisation `foo`,
- you run `nixos-rebuild switch`,
- whoops, you're no longer at specialisation `foo`, but you're rather
brought back to the base system.
(it's especially painful for cases where specialisation is used to load
extra drivers, e.g. Nvidia, since then launching `nixos-rebuild switch`,
while forgetting that you're inside a specialisation, can cause some
parts of your system to get accidentally unloaded.)
I've tried to mitigate that by improving specialisations so that they
create a dedicated file somewhere in `/run/current-system` containing
the specialisation's name (which `nixos-rebuild` could then use as the
default value for `--specialisation`), but I haven't been able to come
up with anything working (plus it would be a breaking change then).
Closes https://github.com/NixOS/nixpkgs/issues/174065
* Will make it so that GHC.Paths's docdir NIX_GHC_DOCDIR points to an
actual directory.
* Documentation of all packages in the environment is available in
`$out/share/doc`.
This has previously been attempted in #76842 and reverted in #77442,
since documentation can collide when the libraries wouldn't (thanks to
the hash in the lib filename). `symlinkJoin` allows collision, so this
solution should be akin to #77523 (minus `buildEnv`, one step at a
time). `installDocumentation = false` restores the old behavior.
Collision in the documentation only happen if the dependency closure of
the given packages has more than one different derivation for the same
library of the very same version. I'm personally inclined not to claim
that our infrastructure does anything sensible in this case.
Additionally, the documentation is likely largely the same in such
cases (unless it is heavily patched).
Resolves#150666.
Resolves#76837.
Closes#150968.
Closes#77523.
This is a followup of #148921, to allow local builds when
`--target-host` is used again. It also documents the change in
behavior, regarding the specialty of the `localhost` value.
By removing the special handling of an empty `buildHost` and non empty
`targetHost`, this change also slightly alters the behavior of
`nixos-rebuild`.
Originally by specifying `--target-host target --build-host ""`, the
now removed special case would transform those arguments to
`--target-host target --build-host target`.
Now the empty `--build-host` would result in a local build.
Added the RFC42-style added the posibility to use
`services.dokuwiki.sites.<name>.settings' instead of passing a plain
string to `<name>.extraConfig`. ´<name>.pluginsConfig` now also accepts
structured configuration.
There should be no reason to use this package as it's a remnant of
non-modular X. Chances are you do not want every single library it
used to pull in:
freetype fontconfig xorg.xorgproto xorg.libX11 xorg.libXt
xorg.libXft xorg.libXext xorg.libSM xorg.libICE
Just pick the ones you really need instead.
`nixpkgs` does not have any users of `xlibsWrapper`.
Closes: https://github.com/NixOS/nixpkgs/issues/194054
- Extensive documentation in NixOS manual
- Deterministic mode that fixes various identifiers relative to disk
partitions and filesystems in ext4 case
- UEFI variable recording
This commit upgrades headscale to the newest version, 0.17.0 and updates
the module with the current breaking config changes.
In addition, the module is rewritten to conform with RFC0042 to try to
prevent some drift between the module and the upstream.
A new maintainer, Misterio77, is added as maintainer.
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
Co-authored-by: Gabriel Fontes <hi@m7.rs>
Co-authored-by: Geoffrey Huntley <ghuntley@ghuntley.com>
* minio: add legacy fs version 2022-10-24T18-35-07Z
This allows users to migrate their data to versions that already removed
support for the legacy fs backend.
* Update nixos/doc/manual/release-notes/rl-2305.section.md
Co-authored-by: Florian Klink <flokli@flokli.de>
Make "$out" more conformant to the bin/ lib/ share/ hirarchy
instead of messing up the user profile
with stuff like cmake/ config/ macros/ icons/ js/ tutorials/ ...
In this layout,
* `tutorials` is now under `share/doc/ROOT/tutorial`
* `cmake`, `font`, `icons`, `js` and `macro` is now under `share/root`
* `Makefile.comp` and `Makefile.config` in now under `etc/root`.
Avoids confusion: `vim-full`'s build-time features are configurable, but both
`vim` and `vim-full` are *customizable* (in the sense of user configuration).
Adds a new option for backup jobs `inhibitsSleep` which prevents
the system from going to sleep while a backup is in progress.
Uses `systemd-inhibit`, which holds a "lock" that prevents the
system from sleeping while the process it invokes is running.
This did require wrapping the existing backup script using
`writeShellScript` so that it could be run by `systemd-inhibit`.
When using the declarative shared folder configuration for resilio sync
it is now possible to pass a path from which to read the secret should
be read at runtime. The path will not be added to the nix store.
The 'secret' parameter to specify the secret directly is still
supported. This option will still store the secret in the nix store.
This commit follows the pattern described in this issue, for upstream
programs that do not provide support for setting a password using a
file: https://github.com/NixOS/nixpkgs/issues/24288
The placement of this option under `nix` was misleading, as it is not
configuration of the Nix daemon, but rather configuration of the NixOS
boot process and how it mounts the Nix store. As such, make it an option
of `boot` to clarify what it actually affects, and imply that it will
only take effect on a reboot.
Since it no longer has the context of nix, adjust the name to include
it.
This also removes automatic enablement/mounting of instance store swap
devices and ext3 filesystems. This behaviour is strongly opinionated
and shouldn't be enabled by default.
The unionfs behaviour never took effect anyway, because the AMI
manifest path only exists for instance store-backed AMIs, which have
not been supported by nixpkgs since
84742e2293 (2019).
