leaving some newlines around after an admonition was closed causes the
newline rule to match, which in turn inserts literallayout newlines into
te xml output. that's not what we want.
Pass `-t` to pixz to prevent it from appending an index to the end of
the uncompressed stream, confusing tools such as `machinectl import-tar`.
Fixes: #187816
with ever more options being markdown rather than docbook the conversion
time is starting to become a significant factor of doc build time.
luckily we can pre-convert all nixos option docs to MD and cache the
result of this conversion, then merge the already-converted json file
with user option docs. we leave options.json unconverted to keep it as
close to the actual nix code as possible.
during docs conversion it can be very useful to know exactly *where* the
error the script complained about is. the name of the option should be
sufficient since option merging is rather rare, and won't merge doc
attributes anyway.
Within a dual VM test-setup a strange behaviour was observed.
The two VMs are connected via one vde_switch instance
(instancevirtualisation.vlans = [ 1 ]; IMO a bad attribute name for
switch instances, has nothing to do with VLANs in sense of 802.1Q).
A ping on the base interface (eth1) works, but not on VLAN
subinterfaces (vlan1@eth1). A tcpdump of eth1 includes the ARP requests
tagged with the subinterfaces VLAN ID, but responses seems not to pass
the vde_switch. This works fine if performed on the base interface.
Putting the vde_switch in hub mode results in flooding
traffic to all vde_switch ports. This results in a expected behaviour
and a ping on a VLAN subinterface works as expected.
Signed-off-by: Philippe Schaaf <philippe.schaaf@secunet.com>
Previously, the location logic was hardcoded, supporting only
Nixpkgs and NixOps properly, leaving other uses of the module
system without good location support.
- initialSystem was keeping track of the evaluating system
- it had been used by `nesting.children`
- since, 20.09, `nesting.children` has been replaced with named
specializations
It appears that this option was left over and not cleand up properly.
Without this fix, setting the shellopts in `machine.execute` is
inconsitent. When no timeout is used, shellopts `set -euo pipefail` are
applied to the command as expected. When a timeout is specified, the
shellopts are not applied to the command itself (which is called inside
a `sh -c` that doesn't inherit the shellopts) but rather to the
`timeout` command, leading to the following full command:
```bash
(set -euo pipefail; timeout 900 sh -c 'cmd') | (base64 --wrap 0; echo)\n
```
With this fix, this is the command we get:
```bash
timeout 900 sh -c 'set -euo pipefail; false | true') | (base64 --wrap 0; echo)\n
```
Documents the _module.args option, motivated by many usages in Flakes,
especially with the deprecation of extraArgs
(78ada83361)
The documentation rendering for this option had to be handled a bit
specially, since it's not declared in nixos/modules like all the other
NixOS options.
Co-Authored-By: pennae <github@quasiparticle.net>
Co-Authored-By: Robert Hensing <robert@roberthensing.nl>
This patch allows creation of files like
/etc/systemd/system/user-.slice.d/limits.conf with
systemd.units."user-.slice.d/limits.conf" = {
text = ''
[Slice]
CPUAccounting=yes
CPUQuota=50%
'';
};
which previously threw an error
Also renames the systemd-unit-path test to sytsemd-misc, and extends it to
test that `systemd.units` can handle directories. In this case we make
sure that resource limits specified in user slices apply.
Naively deduplicate VLANs in the python driver for NixOS tests. The
current implementation accidentally works, since the VLan class mutates
the environment. On construction it sets QEMU_VDE_SOCKET_${id} and this
environment variable gets overwritten once a second VLAN with the same
id is constructed. Because the NIC flags passed to qemu just use the
QEMU_VDE_SOCKET_${id} environment variable, this implicitly chooses a
single vde_switch process for each VLAN.
However, this leads to unusable vde_switch processes being spawned in
each test run and as a side effect makes it impossible to access the
correct VLan objects in the interactive test driver. It also makes it
remarkably hard to understand why the current implementation ever
worked.
it's really easy to accidentally write the wrong systemd Exec* directive, ones
that works most of the time but fails when users include systemd metacharacters
in arguments that are interpolated into an Exec* directive. add a few functions
analogous to escapeShellArg{,s} and some documentation on how and when to use them.
Makes all options rendered in the manual throw an error if they don't
have a type specified.
This is a follow-up to #76184
Co-Authored-By: Silvan Mosberger <contact@infinisil.com>
With the previous change that enabled error propagation through
`inherit_errexit`, the script would fail if `errexit` was set, but
`inherit_errexit` was not. This is due to `shopt -p` exiting with an
error if the option is disabled. To work around this, use the exit
code instead of the text value returned by `shopt -p`.
Fixes#160869.
The aarch64-linux versions of the boot.uefiUsb and boot.uefiCdrom tests
were broken by b0fc9da879.
That commit was a refactor which omitted the qemuBinary option, which was
previously available in the legacy start command. This restores that
option and fixes the tests previously mentioned.
If an error occurs while trying to read a secret file, we want that
error to propagate to the main shell context. That means we have to
set the `inherit_errexit` option, which allows errors from subshells
to propagate to the outer shell. Also, the subshell cannot run as part
of another command, such as `export`, since that will simply ignore
the subshell exit status and only respect `export`s exit status; first
assigning the value to a variable and then exporting it solves issue.
this partially solves the problem of "missing description" warnings of the
options doc build being lost by nix build, at the cost of failing builds that
previously ran. an option to disable this behaviour is provided.
link to search.nixos.org instead of pulling package metadata out of pkgs. this
lets us cache docs of a few more modules and provides easier access to package
info from the HTML manual, but makes the manpage slightly less useful since
package description are no longer rendered.
most modules can be evaluated for their documentation in a very
restricted environment that doesn't include all of nixpkgs. this
evaluation can then be cached and reused for subsequent builds, merging
only documentation that has changed into the cached set. since nixos
ships with a large number of modules of which only a few are used in any
given config this can save evaluation a huge percentage of nixos
options available in any given config.
in tests of this caching, despite having to copy most of nixos/, saves
about 80% of the time needed to build the system manual, or about two
second on the machine used for testing. build time for a full system
config shrank from 9.4s to 7.4s, while turning documentation off
entirely shortened the build to 7.1s.
by default all cores are used
hoping this will fix the hydra i686 squashfs build issues as all the
failures were using 64 cores
Parallel mksquashfs: Using 64 processors
Creating 4.0 filesystem on ..., block size 1048576.
FATAL ERROR: mangle2:: xz compress failed with error code 5
to do this we must replace derivations with attrsets in make-options-doc, since
xml can represent derivations differently from attrset but json cannot. this
also given asciidoc and mddoc the ability to handle derivation differently,
which they previously didn't have.
use the json file derivation we already have to also generate the asciidoc and
md options docs instead of formatting the options in nix. docbook docs are
already produced in derivations.
the new script produce the exact same output as the old in-nix generation.
When displaying the amount of time some step took, with no other
context, it becomes nigh impossible (especially in longer tests) to see
when specific steps finished.
The flag -cpu max leaves QEMU 6.1.0 stuck on some systems,
for example when /dev/kvm is not read-writable.
This does not happen with -cpu qemu64.
Getting stuck like that is a regression in 6.1.0 not yet present in 6.0.0
and should be fixed with 6.2.0 according to early testing with rc1.
We should consider reverting this change when we merge QEMU 6.2.0.
See #146526.
fixes#141596
By using the new extendModules function to produce the specialisations,
we avoid reimplementing the eval-config.nix logic in reverse and fix
cross compilation support for specialisations in the process.
This reverts commit e2bea4427b.
While this commit was probably fine, I want to be conservative
with changes right before the release branch-off.
So far the extendModules commits have been adding and refactoring
expressions that did not affect derivation hashes, whereas this
commit changes the module ordering. I will open a separate PR for
it.
The involved test was nixosTests.nextcloud.basic21.
It has a testScript that is strict in nodes.nextcloud.config.system.build.vm,
in assertions about imagemagick being in the system closure.
The recursion was introduced in 329a4461a7 from
https://github.com/NixOS/nixpkgs/pull/140792
Make sure the all derivations referenced by the test script are
available on the nodes. Accessing these derivations works just fine
without this change when using 9p to mount the host's store, but when
an image is built (virtualisation.buildRootImage), the dependencies
need to be copied to the image. We don't want to copy the script
itself, though, since that would trigger unnecessary image rebuilds.
Add a copyChannel argument which controls whether the current source
tree will be made available as a nix channel in the image or
not. Previously, it always was. Making it available is useful for
interactive use of nix utils, but changes the hash of the image when
the sources are updated.
The current implementation just forks off a thread to read
QEMU's stdout and lets it exist forever. This, however,
makes the interpreter shutdown racy, as the thread could
still be running and writing out buffered stdout when the
main thread exits (and since it's using the low level API,
the worker thread does not get cleaned up by the atexit hooks
installed by `threading`, either). So, instead of doing that,
let's create a real `threading.Thread` object, and also
explicitly `join` it along with the other stuff when cleaning up.
we need the file itself as a dependency for the docbook build, but we don't need
it to be properly sorted at the nix level. push the sort out to a python script
instead to save eval time. on the machine used to write this `nix-instantiate
<nixos/nixos> -A system` went down from 7.1s to 5.4s and GC heap size decreased
by 50MB (or 70MB max RSS).
We have no usecase for manually/selectively starting or stopping VLANs
in integration tests.
By starting and stopping the VLANs with the constructor and destructor
of VLAN objects, we remove the obligation and complexity to maintain
network lifetime separately.
This commit encapsulates the involved domain into classes and
defines explicit and typed arguments where untyped dicts where used.
It preserves backwards compatibility through legacy wrappers.
The current name is misleading: it doesn't contain cli arguments,
but several constants and utility functions related to qemu.
This commit also removes the use of `with import ...` for clarity.
This is a private interface for internal NixOS use. It is similar
to `make-disk-image` except it is much more opinionated about what
kind of disk image it'll make.
Specifically, it will always create *two* disks:
1. a `boot` disk formatted with FAT in a hybrid GPT mode.
2. a `root` disk which is completely owned by a single zpool.
The partitioning and FAT decisions should make the resulting images
bootable under EFI or BIOS, with systemd-boot or grub.
The root disk's zpools options are highly customizable, including
fully customizable datasets and their options.
Because the boot disk and partition are highly opinionated, it is
expected that the `boot` disk will be mounted at `/boot`. It is
always labeled ESP even on BIOS boot systems.
In order for the datasets to be mounted properly, the `datasets`
passed in to `make-zfs-image` are turned in to NixOS configuration
stored at /etc/nixos/configuration.nix inside the VM.
NOTE: The function accepts a system configuration in the `config`
argument. The *caller* must manually configure the system
in `config` to have each specified `dataset` be represented
by a corresponding `fileSystems` entry.
One way to test the resulting images is with qemu:
```sh
boot=$(find ./result/ -name '*.boot.*');
root=$(find ./result/ -name '*.root.*');
echo '`Ctrl-a h` to get help on the monitor';
echo '`Ctrl-a x` to exit';
qemu-kvm \
-nographic \
-cpu max \
-m 16G \
-drive file=$boot,snapshot=on,index=0,media=disk \
-drive file=$root,snapshot=on,index=1,media=disk \
-boot c \
-net user \
-net nic \
-msg timestamp=on
```
Previous to this commit, the entire test driver environment was shared
with the actual python test environment.
This is a hefty api surface. This commit selectively exposes only those
symbols to the test environment that are actually meant to be used by
tests.
This is the case when the test-script is empty. `nixos-build-vms(8)` is
primarily supposed to be used as tool to test changes or to reproduce
bugs (IMHO) where "just spinning up a few VMs" is the primary use-case.
In the ongoing discussion about these changes[1] it was suggested to
only expose it when needed (i.e. in the case I described above) to keep
the API surface as slim as possible.
[1] https://github.com/NixOS/nixpkgs/pull/133675#discussion_r688112485
This is relevant for `nixos-build-vms(8)` which doesn't have a
test-script. In that case it's more intuitive to directly go into the
interactive mode which is IMHO more intuitive.
Previously the driver was configured exclusively through convoluted
environment variables.
Now the driver's defaults are configured through env variables.
Some additional concerns are in the github comments of this PR.
the use of python further restricts possible RFC1035 host labels since
dash is not allowed for use in python identifiers.
The previous implementation of this check was flawed, since it did not
check the `hostName` value that is actually used to construe the
identifier, but the node name, which can be anything, e.g. just `machine`.
The previous implementation, by further restricting RFC1035 labels, only
for the sake of testing seems to be an unacceptable restriction and should
be addressed separately.
The disk image calculator was using find + exec forking du for every
file in the disk image, making it very slow. Change du to accept files,
nul delimeted on stdin to speed it back up.
Before change:
nix-build nixos/tests/image-contents.nix 9.71s user 1.06s system 8% cpu 2:13.11 total
After change:
nix-build nixos/tests/image-contents.nix 9.93s user 1.23s system 21% cpu 51.601 total
nixos tests are blended with other system configurations, hence
their settings must be either enforced or defaulted.
This particular setting is set via lib.nixosSystem as
`system.nixos.revision = final.mkIf (self ? rev) self.rev;` which would
mean that without this change no flake generated nixos could be blended
with nixos testing.
This setting was made previously constant in
169c6b4b14 in order to avoid pointless
rebuilds of the testing VMs, but was set without enforcing it.
Apparently this looks like it was forgotten when doing commit
3884ff70ba, which refactored the test
runner and driver a bit.
The passthru argument actually was correctly reintroduced in
setupDriverForTest, but the actual makeTest function didn't use it.
This fixes the nixpkgs tarball job, which previously failed with:
attribute 'elkPackages' missing, at /build/source/pkgs/tools/misc/logstash/6.x.nix:58:30
Signed-off-by: aszlig <aszlig@nix.build>
Acked-by: David Arnold <dar@xoe.solutions>
Fixes: https://github.com/NixOS/nixpkgs/issues/127274
Merges: https://github.com/NixOS/nixpkgs/pull/127346
Less nesting, where that improves readability. More nesteing, where
that improves readability, but most importantly:
Expose individual functions separately so that they can be more easily
built directly, eg.:
`nix build --impure --expr '(import ./testing-python.nix {system = builtins.currentSystem;}).mkTestDriver'`
At nixpkgs root:
`rg redirectSerial ./` does not result in any other match
nor does
`rg USE_SERIAL ./` except for an unrelated match in:
pkgs/tools/graphics/argyllcms/default.nix
Bash's standard behavior of not propagating non-zero exit codes
through a pipeline is unexpected and almost universally
unwanted. Default to setting `pipefail` for the command being run;
it can still be turned off by prefixing the pipeline with
`set +o pipefail` if needed.
Also, set `errexit` and `nonunset` options to make the first command
of consecutive commands separated by `;` fail, and disallow
dereferencing unset variables respectively.
When importing Nixpkgs within Nixpkgs, we should not consider aliases
to ensure we don't rely on them internally.
There are probably more places that need to be converted.
