This is useful if your postgresql version is dependant on
`system.stateVersion` and not pinned down manually. Then it's not
necessary to find out which version exactly is in use and define
`package` manually, but just stay with what NixOS provides as default:
$ nix-instantiate -A postgresql
/nix/store/82fzmb77mz2b787dgj7mn4a8i4f6l6sn-postgresql-14.7.drv
$ nix-instantiate -A postgresql_jit
/nix/store/qsjkb72fcrrfpsszrwbsi9q9wgp39m50-postgresql-14.7.drv
$ nix-instantiate -A postgresql.withJIT
/nix/store/qsjkb72fcrrfpsszrwbsi9q9wgp39m50-postgresql-14.7.drv
$ nix-instantiate -A postgresql.withJIT.withoutJIT
/nix/store/82fzmb77mz2b787dgj7mn4a8i4f6l6sn-postgresql-14.7.drv
I.e. you can use postgresql with JIT (for complex queries only[1]) like
this:
services.postgresql = {
enable = true;
enableJIT = true;
};
Performing a new override instead of re-using the `_jit`-variants for
that has the nice property that overlays for the original package apply
to the JIT-enabled variant, i.e.
with import ./. {
overlays = [
(self: super: {
postgresql = super.postgresql.overrideAttrs (_: { fnord = "snens"; });
})
];
};
postgresql.withJIT.fnord
still gives the string `snens` whereas `postgresql_jit` doesn't have the
attribute `fnord` in its derivation.
[1] https://www.postgresql.org/docs/current/runtime-config-query.html#GUC-JIT-ABOVE-COST
Closes#150801
Note: I decided against resuming directly on #150801 because the
conflict was too big (and resolving it seemed too error-prone to me).
Also the `this`-refactoring could be done in an easier manner, i.e. by
exposing JIT attributes with the correct configuration. More on that
below.
This patch creates variants of the `postgresql*`-packages with JIT[1]
support. Please note that a lot of the work was derived from previous
patches filed by other contributors, namely dasJ, andir and abbradar,
hence the co-authored-by tags below.
Effectively, the following things have changed:
* For JIT variants an LLVM-backed stdenv with clang is now used as
suggested by dasJ[2]. We need LLVM and CLang[3] anyways to build the
JIT-part, so no need to mix this up with GCC's stdenv. Also, using the
`dev`-output of LLVM and clang's stdenv for building (and adding llvm
libs as build-inputs) seems more cross friendly to me (which will
become useful when cross-building for JIT-variants will actually be
supported).
* Plugins inherit the build flags from the Makefiles in
`$out/lib/pgxs/src` (e.g. `-Werror=unguarded-availability-new`). Since
some of the flags are clang-specific (and stem from the use of the
CLang stdenv) and don't work on gcc, the stdenv of `pkgs.postgresql`
is passed to the plugins. I.e., plugins for non-JIT variants are built
with a gcc stdenv on Linux and plugins for JIT variants with a clang
stdenv.
Since `plv8` hard-codes `gcc` as `$CC` in its Makefile[4], I marked it
as broken for JIT-variants of postgresql only.
* Added a test-matrix to confirm that JIT works fine on each
`pkgs.postgresql_*_jit` (thanks Andi for the original test in
#124804!).
* For each postgresql version, a new attribute
`postgresql_<version>_jit` (and a corresponding
`postgresqlPackages<version>JitPackages`) are now exposed for better
discoverability and prebuilt artifacts in the binary cache.
* In #150801 the `this`-argument was replaced by an internal recursion.
I decided against this approach because it'd blow up the diff even
more which makes the readability way harder and also harder to revert
this if necessary.
Instead, it is made sure that `this` always points to the correct
variant of `postgresql` and re-using that in an additional
`.override {}`-expression is trivial because the JIT-variant is
exposed in `all-packages.nix`.
* I think the changes are sufficiently big to actually add myself as
maintainer here.
* Added `libxcrypt` to `buildInputs` for versions <v13. While
building things with an LLVM stdenv, these versions complained that
the extern `crypt()` symbol can't be found. Not sure what this is
exactly about, but since we want to switch to libxcrypt for `crypt()`
usage anyways[5] I decided to add it. For >=13 it's not relevant
anymore anyways[6].
* JIT support doesn't work with cross-compilation. It is attempted to
build LLVM-bytecode (`%.bc` is the corresponding `make(1)`-rule) for
each sub-directory in `backend/` for the JIT apparently, but with a
$(CLANG) that can produce binaries for the build, not the host-platform.
I managed to get a cross-build with JIT support working with
`depsBuildBuild = [ llvmPackages.clang ] ++ buildInputs`, but
considering that the resulting LLVM IR isn't platform-independent this
doesn't give you much. In fact, I tried to test the result in a VM-test,
but as soon as JIT was used to optimize a query, postgres would
coredump with `Illegal instruction`.
A common concern of the original approach - with llvm as build input -
was the massive increase of closure size. With the new approach of using
the LLVM stdenv directly and patching out references to the clang drv in
`$out` the effective closure size changes are:
$ nix path-info -Sh $(nix-build -A postgresql_14)
/nix/store/kssxxqycwa3c7kmwmykwxqvspxxa6r1w-postgresql-14.7 306.4M
$ nix path-info -Sh $(nix-build -A postgresql_14_jit)
/nix/store/xc7qmgqrn4h5yr4vmdwy56gs4bmja9ym-postgresql-14.7 689.2M
Most of the increase in closure-size stems from the `lib`-output of
LLVM
$ nix path-info -Sh /nix/store/5r97sbs5j6mw7qnbg8nhnq1gad9973ap-llvm-11.1.0-lib
/nix/store/5r97sbs5j6mw7qnbg8nhnq1gad9973ap-llvm-11.1.0-lib 349.8M
which is why this shouldn't be enabled by default.
While this is quite much because of LLVM, it's still a massive
improvement over the simple approach of adding llvm/clang as
build-inputs and building with `--with-llvm`:
$ nix path-info -Sh $(nix-build -E '
with import ./. {};
postgresql.overrideAttrs ({ configureFlags ? [], buildInputs ? [], ... }: {
configureFlags = configureFlags ++ [ "--with-llvm" ];
buildInputs = buildInputs ++ [ llvm clang ];
})' -j0)
/nix/store/i3bd2r21c6c3428xb4gavjnplfqxn27p-postgresql-14.7 1.6G
Co-authored-by: Andreas Rammhold <andreas@rammhold.de>
Co-authored-by: Janne Heß <janne@hess.ooo>
Co-authored-by: Nikolay Amiantov <ab@fmap.me>
[1] https://www.postgresql.org/docs/current/jit-reason.html
[2] https://github.com/NixOS/nixpkgs/pull/124804#issuecomment-864616931
& https://github.com/NixOS/nixpkgs/pull/150801#issuecomment-1467868321
[3] This fails with the following error otherwise:
```
configure: error: clang not found, but required when compiling --with-llvm, specify with CLANG=
```
[4] https://github.com/plv8/plv8/blob/v3.1.5/Makefile#L14
[5] https://github.com/NixOS/nixpkgs/pull/181764
[6] c45643d618
`bridge` is used by iproute2, so using this name for protonmail-bridge
made it very likely to produce a name "conflict".
Also `bridge` is used in the Makefile by upstream project Makefile but
it apparently is renamed later on when packaged in rpm/deb so even for
coherence purposes it does make sense to revert it back to the name
`protonmail-bridge` that were previously being used.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
The keyd package already exists, but without a systemd service.
Keyd requires write access to /var/run to create its socket. Currently
the directory it uses can be changed with an environment variable, but
the keyd repo state suggests that this may turn into a compile-time
option. with that set, and some supplementary groups added, we can run
the service under DynamicUser.
Co-authored-by: pennae <82953136+pennae@users.noreply.github.com>
The single option tries to do too much work, which just ends up confusing people.
So:
- don't force the console font, the kernel can figure this out as of #210205
- don't force the systemd-boot mode, it's an awkward mode that's not supported
on most things and will break flicker-free boot
- add a separate option for the xorg cursor scaling trick and move it under the xorg namespace
- add a general `fonts.optimizeForVeryHighDPI` option that explicitly says what it does
- alias the old option to that
- don't set any of those automatically in nixos-generate-config
the conversion to the markdown-based workflow missed that generating the
manual as docbook also generates the option docs with nixos-specific
wrapper elements that require postprocessing before the document is
real, valid docbook. restore this processing to the full manual.
it's not the prettiest thing, done like this, but we only need it for
one release so it doesn't have to be.
- drop media-session (rip 💀)
- stop trying to let people override default configs, those never got merged correctly
- drop all the complexity arising from having to vendor default config files
- build docs in sandbox as we no longer recurse
This patch fixes two issues:
1. The file in which environment variables are set is inconsistent.
- This file sets them in zprofile when programs.zsh.enable is not
set.
- Zsh module sets them in zshenv when programs.zsh.enable is set.
2. Setting environment variables in zprofile overrides what users set
in .zshenv. See these[1] home-manager[2] issues[3].
/etc/profile is also changed to /etc/set-environment. Here is a
comparison:
Using /etc/profile:
- Pros
- config.environment.shellInit is sourced in all zsh
- Cons
- config.environment.loginShellInit is also sourced in non-login zsh
- config.programs.bash.shellInit is also sourced in all zsh
- config.programs.bash.loginShellInit is also sourced in all zsh
Using /etc/set-environment:
- Pros
- config.programs.bash.shellInit is not sourced in any zsh
- config.programs.bash.loginShellInit is not sourced in any zsh
- Cons
- config.environment.shellInit is not sourced in any zsh
- config.environment.loginShellInit is not sourced in any zsh
[1]: https://github.com/nix-community/home-manager/issues/2751#issuecomment-1048682643
[2]: https://github.com/nix-community/home-manager/issues/2991
[3]: https://github.com/nix-community/home-manager/issues/3681#issuecomment-1436054233
Effectively removes support for the following hashing algorithms
as announced in the NixOS 22.11 release notes:
- bcrypt_x ($2x$)
- sha256crypt ($5$)
- sha1crypt ($sha1$)
- sunmd5 ($md5$)
- md5crypt ($1$)
- nt ($3$)
- bdiscrypt (_)
- bigcrypt (:)
- descrypt (:)
And exposes the crypt scheme ids for enabled algorithms, so they can be
reused for validation in the users-groups module.
- Christmas is over!
- Upstream has changed the name of the target triplet used for the JS
backend from js-unknown-ghcjs to javascript-unknown-ghcjs, since Cabal
calls the architecture "javascript":
6636b67023
Since the triplet is made up anyways, i.e. autoconf does not support
it and Rust uses different triplets for its emscripten backends, we'll
just change it as well.
- Upstream fixed the problem with ar(1) being invoked incorrectly by stage0:
e987e345c8
systemd v253 changelog/NEWS:
https://github.com/systemd/systemd/blob/v253/NEWS
NixOS changes:
0007-hostnamed-localed-timedated-disable-methods-that-cha.patch was
dropped, because systemd gained support to handle read-only /etc.
*-add-rootprefix-to-lookup-dir-paths.patch required some updates too,
as src/basic/def.h moved to src/basic/constants.h.
systemd/systemd#25771 switched p11kit to become
dlopen()'ed, so we need to patch that path.
added a note to the 23.05 release notes to recommend `nixos-rebuild boot`
Co-authored-by: Florian Klink <flokli@flokli.de>
